# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - FIXES
  - Fixed an issue where running multiple instances of .hplog -i' may cause more than 90% CPU utilization. 
  - Fixed an issue where the servers with large amount of memory may ASR during memory initialization. 
  - Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant G6 servers. 
  - ASR time-out value can be set from hpasmcli when ASR is enabled. 
  - Updated the installation instructions in hp_mgmgt_install man page. 
  - Removed the script dependency between the hp-health and hp-snmp-agents RPM. To enable just storage agents, customers now in  stall the hp-health and hp-snmp-agents. If the "/etc/init.d/hp-health" file is removed or renamed, the storage agents will   start if configured in the /opt/hp/hp-snmp-agents/cma.conf file. 
  - Init scripts .status. function for hp-snmp-agents & hp-health now differentiates whether an agent exited normally or abnorm  ally. 
  - libcpqci moved to hp-health to simplify dependency handling. and .libcpqci updated to version 2, will now handle hpilo driv  er. 
  - Added Trusted Platform Module (TPM) awareness.

  - FIXES
  - Fixed an issue where   hpasmcli does segmentation fault if we execute the following sequence of commands in hpasmcli on Int  el platforms: show dimm, show temp, show dimm. 
  - Fixed the improper functioning of .repair. option in hpasmcli utility. 
  - Fixed an issue where  hpasmxld/hpasmlited was logging all the messages into syslog with priority .error.. Now it will log e  ach message with its actual priority. 
  - Fixed an issue where IML was not showing new events in hpasmlited + OpenIPMI configuration. 
  - Fixed an issue where the command .service hp-health restart. was showing the twice.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.1.1
changelog:
  - FIXES
  - Fixed an issue to align hp-health status messages.
  - Fixed an issue to stop pagination of IMLs when in script mode.
  - The "hp-snmp-agents"and "hp-health" initialization scripts are enhanced to check for the existence of a support IPMI stack.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. 
  - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. 
  - Added support to report USB key/SD card information. 
  - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. 
  - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". 
  - Added Physical Disk Temperature support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.6.0
changelog:
  - ENHANCEMENTS
  - Added support for the MIBs in the Power Supply Table.
  - Added support for the MIB that specifies the version of Insight Management Agents running on the system.
  - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter.

  - FIXES
  - Addressed the tape drive not being displayed on the SMH on few configurations.
  - Displayed the placement correctly for the failed drive after reboot.
  - On Cmax, net-snmp displayed duplicate registration message on the syslog.
  - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
         . HP NC551m Dual Port FlexFabric 10Gb Adapter 
         . HP NC551i Dual Port FlexFabric 10Gb Adapter 
         . HP NC365T 4-port Ethernet Server Adapter 
         . HP NC543i 10Gb 2-port  4X Flex-10  QDR Server Adapter 
         . HP NC553m 10Gb 2 port FlexFabric Converged Network  Adapter 
         . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC552SFP 2-port 10Gb Server Adapter 
         . HP StorageWorks CN1000Q Dual Port Converged Network Adapter 
         . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter    

  - FIXES
  - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. 
  - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o  utput to /dev/null. 
  - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. 
  - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant  G7 Servers. 
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Included a document called  HP_SNMP_Trap_Guide.txt  that  describes the Linux SNMP trap ID messages generated by the agent 
  - Improvements to distribution identification including more consistent output and increased support for community and region  al   distributions. 
  - Added support for Solid State Drives. 
  - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/  MSA2324sa when co  nnected to HP SC08Ge Host Bus Adapter.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
       .	HP NC542m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP StorageWorks CN1000E Dual Port Converged Network Adapter 
       .	HP NC550m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter 
       .	HP NC551i Dual Port FlexFabric 10Gb Network Adapter 
       .	HP NC362i Integrated Dual Port Gigabit Server Adapter 
       .	HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter 

  - FIXES
  - Modified the 6064 trap implementation to reflect the correct error. 
  - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. 
  - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. 
  - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. 
  - Modified the script to get the NIC ports details from /sys/class/net. 
  - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat  ion instead of subsytem device information.  
  - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. 
  - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section.  
  - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. 
  - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H  Pcmanic.pp).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information   if the power supply supports error reporting. 
  - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. 
  - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. 
  - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. 
  - Updated the SIM event severity to .informational. after the secure erase is completed. 
  - Added support for HP NC362i Integrated Dual Port. 

  - FIXES
  - The cmapeerd agent logs the error .sendto() failed. to cma.log file. 
  - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. 
  - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. 
  - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. 
  - The Part Number displayed incorrectly. 
  - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. 
  - The System Id displayed incorrectly on the System Management Homepage (SMH). 
  - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. 
  - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). 
  - The multipath status was displayed as "unknown" when a drive failed. 
  - The failed logical drive status displayed incorrectly during an array move, expansion or shrink.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - ENHANCEMENTS
  - Added support for HP 6GB Serial Attached SCSI (SAS) hard drives. 
  - Added support for Intel ICH10 SATA IDE controller. 
  - Added support for HP NC362i Integrated Dual Port Gigabit Server Adapter. 
  - Added support for NetXen and HP NC-Series Intel e1000e Driver to send the traps. 
  - Added support for multi-board chassis product name and ID. 
  - Updated cmasm2d polling cycle to reduce system workload. 
  - Added the performance agents (cmaperfd).

  - FIXES
  - Fixed an issue where Linux event daemon reported RAID 1 inconsistency events. 
  - Fixed an issue where cmaidad agents send bad request commands to HP P700m Smart Array controller.
  - Fixed an issue with inconsistent data by setting Monitor and performance data buffers to zero before issuing ioctls to HP S  mart Array B110i SATA raid controller. 
  - Fixed an issue where HP Smart Array B110i SATA raid controller was displayed twice as HP Smart Array B110i SATA raid contro  ller and standard IDE controller. 
  - Fixed an issue where incorrect PCA Part number and system ID details sent in trap email. 
  - Fixed an issue where agent crashed when multiple VLANs are created and link up/down events are generated. 
  - Fixed an issue with displaying HP BL p-Class rack data in the System Management HomePage. 
  - Fixed an issue where cmahealthd sends the 6064 trap correctly when correctable memory errors are occurred. 
  - Fixed an issue where System Management Homepage correctly displays the FB DDR3 DIMM type information. 
  - Fixed an issue on HP ProLiant DL320 G6 server where the 6018 trap is not sent correctly when the temperature sensors are ov  erheated. 
  - Fixed the customer issue to use bond IP while sending traps if bondX is chosen as param in cma.conf.  
  - Fixed problem with cmarackd startup.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant G6 servers. 
  - Added Trusted Platform Module (TPM) awareness. 
  - Removed the script dependency between the hp-health and hp-snmp-agents RPM. To enable just storage agents, customers now in  stall the hp-health and hp-snmp-agents. If the "/etc/init.d/hp-health" file is removed or renamed, the storage agents will   st  art if configured in the /opt/hp/hp-snmp-agents/cma.conf file. 
  - Enabled the selective bubbling up of events in Integrated Management Log. 
  - Init scripts .status. function for hp-snmp-agents & hp-health now differentiates whether an agent exited normally or abnorm  ally. 
  - Added support for CpqHeResMem2 MIBs. 
  - The following MIB tables have been deprecated.  These tables will be removed in a future release: cpqSiMemModuleTable, cpqH  eResMemBoardTable, cpqHeResMemModuleTable. The data in these tables will be available in the new cpqHe2ResMemModuleTable &   cpqHe2ResMemBoardTable MIB tables.

  - FIXES 
  - Fixed an issue where the cmasm2d agent used to log the following error in cma.log after an iLO reset had been occurred: "cm  asm2d[7880]: sm2_ioctl: Index mismatch 50 != 51, retrying receive". 
  - Fixed an issue when a fan removed or failed, the overall thermal and fan status will be updated correctly in System Managem  ent Homepage. 
  - Fixed an issue where the System Management Homepage was not displaying the file system details of a USB key after unmountin  g and mounting it again. 
  - Fixed an issue where the agents used to send the trap email twice after a restart. 
  - The shut down notification sent by cmapeerd daemon is now acknowledged by all agents before the cmapeerd shuts down. This w  ill eliminate the sporadic error messages logged by the agents during shut down. 
  - The build number will now increment when the hp-snmp-agents rebuild.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.1.1
changelog:
  - FIXES
  - Fixed the rebuild script for hp-snmp-agents.
  - Fixed an issue where the agents show IOCTL ERROR mddessage when it polls the first time after booting the system.
  - Fixed memory leak issues in presence of bond and VLan interfaces.
  - Fixed an issue where the agents were showing disabled on systems that don't support hyperthreading.
  - The hp-snmp-agents script will now properly halt if the hp-health initialization script fails to exit cleanly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.1.0
changelog:
  - ENHANCEMENTS
  - Initial release. 
  - NIC Agent now shows IPV6 address in System Management Homepage (hpsmh) on IPv6 only system. 
  - Added fan module number to message logged to syslog for MSA70. 
  - Changed "opt/compaq" to "opt/hp/hp-snmp-agents". 
  - Updated reported MIB revisions for 8.10 storage agents. 
  - Make physical drive path status in the physical drive table report as PATH_STATUS_OTHER if the physical drive status is PHY  S_FAILED. 
  - Make the path table report path status as "PATH_STATUS_OTHER" when the physical drive status is unknown.

  - FIXES
  - Fixed the ProLiant Management Command Line Interface Utility (hpasmcli) to display the temperature and fan failure informat  ion correctly. 
  - Fixed  the ProLiant Integrated Management Log (IML) Utility (hplog) to display number of events correctly. 
  - Fixed the discrepancy in ASR time-out value displayed on hpasmcli and hplog. 
  - Fixed an issue where hpasmcli, hplog and System Management Homepage (hpsmh) were showing different status for CPU fan redun  dancy in HP ML350 G5. 
  - Fixed an issue where  Power supply status of HP DL585G1 not shown correctly in CLI utilities. 
  - Fixed the hpasmcli to display the UID information correctly on HP ML310 G4. 
  - NIC Agent now shows proper link status for Loopback interface (lo). 
  - Fixed NIC Agent where it does not generate netsnmp_assert error messages in cma.log file. 
  - Fixed NIC Agent to show the correct speed (10Gbps) in the System Management Homepage for 10Gig NICs. 
  - Fixed NIC Agent to show the correct Adapter Name for HP NC380T Adapter. 
  - Fixed issue where some events may not reported if a large number of physical drives were present. 
  - Fixed issue where the device node name was sometimes not reported correctly for Smart array attached drives. 
  - Fixed issue where Logical drives shown as none in hpsmh after deleting the first logical drive. 
  - Fixed ps/grep race in storage agent (cmastor) startup script. 
  - Fixed status of processor SCSI ID reported as unknown. 
  - Fixed hpsmh where sometimes shows drive is blinking when it isn't. 
  - Fixed re-insertion of hot-plugged fan module generated IPMI failure event. 
  - Fixed an issue where cmapeerd was showing the error message "recvfrom() failed".


author: Ver:9.40-12.0
changelog:
  - Please refer to online documentation by searching for the 
  "HP Array Configuration Utility CLI" using the search box on
  http://www.hp.com. Then select the Download software link,
  select your operation system. Under the Enhancements tab is a 
  description of the changes. (Severity: Low)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - 8.4.0 release (Severity: Medium)
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3)


author: Hewlett-Packard Development Company, L.P. 7.2.0
changelog:
  - Updated Apache to version 2.4.3 (Severity: Critical)
   - Improved logging on few Operating Systems
   - Improvement in Certificate management
   - Added support for Firefox ESR 17.0 and Internet Explorer 10.0
   - Enable support for Transport Layer Security (TLS) protocol 1.1 / 1.2
   - Improved User Interface for Online Help
   - Improved CLI options for easier management of SMH configurations
   - Secured handling of HTTP communication


author: Hewlett-Packard Development Company, L.P. 7.1.2
changelog:
  - Improved security features 
   - Improved logging on few Operating Systems
   - Enable support of Red Hat Client 5.8
   - Updated OpenSSL to version 1.0.1c (Severity: Critical)
   - Updated PHP to version 5.3.14 (Severity: Critical)
   - Improvement in RPM packaging


author: Hewlett-Packard Development Company, L.P. 7.1.1
changelog:
  - On some Non-English Windows Operating Systems, user is not able to login into SMH 7.1.0. This version will solve this problem (Severity: Critical)
   - Improved security features of PHP (Severity: Critical)


author: Hewlett-Packard Development Company, L.P. 7.1.0
changelog:
  - Improved trust mode during upgrade
   - Fixed group configuration management during Replicate Agents Settings (Severity: Serious)
   - Improved SMH service management
   - Fixed PHP files to avoid crash (Severity: Serious)
   - Improved webapp configuration files
   - Fixed SMH supporting DLLs to avoid version conflicts (Severity: Serious)
   - updated properties of SMH setup file
   - Updated secured handling of HTTP response
   - Updated Libxml2 to version 2.7.8
   - Updated PHP to version 5.3.10
   - Updated Curl library to version 7.24.0
   - Updated OpenSSL to version 1.0.0h
   - Updated SMH service runs with managed privileges
   - Enable support of Windows 2008 R2 Sp1 - Server Core
   - Enable support of Windows Server 8 (Beta)
   - Enable support of Windows Multipoint Server 2011 for x64
   - Enable support of Microsoft Windows Small Business Server 2011 for x64, Standard and Essentials
   - Updated usability of IP restrictions with SMH Command Line Interface
   - Updated information provided on webapp availability & loading statistics
   - Added support for Firefox 9.0 & 10.0

   * Thu Oct 13 2011 Hewlett-Packard Development Company, L.P. 7.0.0
   - Fixed SMH improperly displayed an invalid certificate warning when restarted, even on a fresh install. (Severity: Medium)
   - Added a command line option to modify the local and state information in the SMH PKCS (Public-Key Cryptography Standards) data
   - Added secured handling of HTTP request and response
   - Added support for Firefox 6.0, 7.0, 8.0 and Internet Explorer 9.0
   - clarified the log messages
   - Improved handling of command Line Interface options
   - Improved handling of IP fields
   - Improved handling of memory resources
   - Improved handling of revoked trusted certificate
   - Improved handling of SMH configuration file and settings
   - Improved CLI options, for easier management of SMH configurations
   - Updated the HTTP links
   - Updated Apache to version 2.2.21
   - Updated Curl library to version 7.21.7
   - Updated OpenSSL to version 1.0.0e
   - Updated PHP to version 5.3.8


author: Sivakumar A <sivakumar.alagumalai@hp.com> 4.2.0-0
changelog:
  - v4.2.0 is mainly targeted for iLO4 1.30, iLO3 1.60 and iLO2 2.20
  - Created 32 bit and 64 bit RPM Packages to load shared library from hp-helth agent as libcpqci.so (in case of 32bit OS) and libcpqci64.so (in case of 64bit OS)


author: Rajeshwari <stsd-ailsa@hp.com> 3.0.0-1
changelog:
  - Support for iLO3, iLO3 identification
  - Fixed an issue related to dynamic linking of hponcfg with libcpqci.so to resolve rdp related issue.


author: Rajeshwari <stsd-ailsa@hp.com> 2.2.0-2
changelog:
  - Extension of -w option to include more iLO configuration
  - Fixed an issue where previous version of hponcfg failed to support older iLO Channel Interface drivers


author: Pradeep <kumarpradeep.misra@hp.com> 1.9.0-1
changelog:
  - Made some changes in the hponcfg.spec to support the PSP8.2(Severity: Minor)
  - Made some changes to provide appropriate error messages when it encounters older drivers
    (Severity: Minor)
  - Modified Change log to adhere to specification; introduced version number
    (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-2
changelog:
  - Made some modifications in the changelog section to adhere to updated
    RPM commonality specification. Added the Severity information.
    (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-1
changelog:
  - Made some changes in the rpm specification file which would ensure
    the binary is placed only in /sbin folder (Severity: Minor)
  - Modified Change log to adhere to specification; introduced version number.
    (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-1
changelog:
  - Support for Standard Streams in Hponcfg (Severity: Major)
  - Inclusion of iLO reset notification (Severity: Major)
  - Included the Packager and URL sections to adhere to the rpm commonality
    specifications. (Severity: Minor)
  - Changed "hpasm" to "hp-snmp-agents" in the requires section.
    (Severity: Critical)


author: Rajeshwari <stsd-ailsa@hp.com> 1.7.0-2
changelog:
  - Introduced this changelog (Severity: Minor)
  - Introduced License field with value "Proprietary" (Severity: Minor)
  - Updated build architecture to "noarch" to indicate support for all versions
    of Linux, both IA32 and x86-64 (Severity: Major)


author: Ver:9.40-12.0
changelog:
  - Please refer to online documentation by searching for the
  'HP Array Configuration Utility' using the search box on
  http://www.hp.com. Then select the Download software link,
  select your operation system. Under the Enhancements tab is a
  description of the changes. (Severity: Low)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - 8.4.0 release (Severity: Medium)
  - ENHANCEMENTS
  - Rebuilt the driver against current distribution kernels


