changed Online ROM Flash Component for Windows - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp025736.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812

Release Version and/or Date: 
     6.602

Last Recommended or Critical Version:
     6.60

Previous Version of Firmware:
     6.60

Firmware Dependency:
     None

Enhancements/New Features:
  • Performance enhancement when a drive starts to degrade due to excessive recovered media errors.
Problems Fixed:
  • On systems configured with HP Smart Array P711m controllers connected to logical volumes on HP P2000 G3 SAS storage arrays, the Smart Array device driver ‘hpsa’ would cease to function during installation of VMware vSphere 5.5 Update 2.
  • After the Smart Array device driver 'hpsa' was upgraded to version 3.4.6-165 on Red Hat Enterprise Linux 6 Update 4 or Update 5 on a server configured with logical volumes on HP P2000 G3 Storage Systems or HP MSA 2040 SAS Storage Arrays, the system would cease to function and an HP Smart Array P712m controller lockup would be reported after reboot. (POST Error: 1719 - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13))

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware firmware 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B cpqsetup.exe cp025736.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p602835141/v105184/cp025736.exe file://./hp/swpackages/cp025736.exe changed Online ROM Flash Component for Windows (x64) - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp025737.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
   Online ROM Flash Component for Windows (x64) - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812

Release Version and/or Date: 
     6.62

Last Recommended or Critical Version:
     6.60

Previous Version of Firmware:
     6.60

Firmware Dependency:
     None 

Enhancements/New Features:
  • Performance enhancement when a drive starts to degrade due to excessive recovered media errors.
Problems Fixed:
  • On systems configured with HP Smart Array P711m controllers connected to logical volumes on HP P2000 G3 SAS storage arrays, the Smart Array device driver ‘hpsa’ would cease to function during installation of VMware vSphere 5.5 Update 2.
  • After the Smart Array device driver 'hpsa' was upgraded to version 3.4.6-165 on Red Hat Enterprise Linux 6 Update 4 or Update 5 on a server configured with logical volumes on HP P2000 G3 Storage Systems or HP MSA 2040 SAS Storage Arrays, the system would cease to function and an HP Smart Array P712m controller lockup would be reported after reboot. (POST Error: 1719 - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13))

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware firmware 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B cpqsetup.exe cp025737.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1743151110/v105186/cp025737.exe file://./hp/swpackages/cp025737.exe changed Online ROM Flash Component for Windows - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026359.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822

Release Version and/or Date:
     6.34

Last Recommended or Critical Version:
     6.34  

Previous Version of Firmware:
     6.00

Firmware Dependency:
     None

  • Enhancements/New Features:

  • Improved error handling when hard disk drives generate a large number of recoverable errors.
  • Added support for non-hotplug disk drives.
  • Added support for HP ProLiant Gen9 servers:
    • HP ProLiant BL460c Gen9 Server
    • HP ProLiant BL660c Gen9 Server

  • Problems Fixed:

  • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

  • When a controller was set to RAID6 mode and a large number of recoverable errors were generated by hard disk drives in the system, the controller might go into a degraded mode and cease to function. A 0x0E error message would display during POST on subsequent power cycle and in the Integrated Management Log (IML).
  • The controller would report 0xE0 error to HP Smart Storage Administrator (HP SSA) and would cease to function when set to RAID 6 mode.
  • Intermittent SSD SATA 6G drive failures would occur when drive was configured in Bay 1 of HP ProLiant BL465 Gen8 Server.
  • Uncorrectable ECC errors would cause the controller to stop responding (Lockup 0x13).  This version of Smart Array firmware properly calculates the maximum controller memory bandwidth required to sustain streaming write operations with the current logical drive configuration and reduces the cache memory speed on configurations that do not require peak controller memory bandwidth.  When running at the slower memory speed, less power is consumed and performance degradation is expected to be negligible. For additional information, reference Customer Advisory c03755983.
  • The HP D2220sb Storage Blade is not recognized when configuring it with the HP ProLiant BL460c Gen9 Server Blade. For additional information please refer to the customer advisory # c04602866

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware firmware firmware 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 cpqsetup.exe cp026359.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p970245794/v107073/cp026359.exe file://./hp/swpackages/cp026359.exe changed Online ROM Flash Component for Windows (x64) - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp026361.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows (x64) - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822

Release Version and/or Date:
     6.34

Last Recommended or Critical Version:
     6.34    

Previous Version of Firmware:
     6.00

Firmware Dependency:
     None

Enhancements/New Features:

  • Improved error handling when hard disk drives generate a large number of recoverable errors.
  • Added support for non-hotplug disk drives.
  • Added support for HP ProLiant Gen9 servers:
    • HP ProLiant BL460c Gen9 Server
    • HP ProLiant BL660c Gen9 Server

Problems Fixed:

  • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

  • When a controller was set to RAID6 mode and a large number of recoverable errors were generated by hard disk drives in the system, the controller might go into a degraded mode and cease to function. A 0x0E error message would display during POST on subsequent power cycle and in the Integrated Management Log (IML).
  • The controller would report 0xE0 error to HP Smart Storage Administrator (HP SSA) and would cease to function when set to RAID 6 mode.
  • Intermittent SSD SATA 6G drive failures would occur when drive was configured in Bay 1 of HP ProLiant BL465 Gen8 Server.
  • Uncorrectable ECC errors would cause the controller to stop responding (Lockup 0x13).  This version of Smart Array firmware properly calculates the maximum controller memory bandwidth required to sustain streaming write operations with the current logical drive configuration and reduces the cache memory speed on configurations that do not require peak controller memory bandwidth.  When running at the slower memory speed, less power is consumed and performance degradation is expected to be negligible. For additional information, reference Customer Advisory c03755983.
  • The HP D2220sb Storage Blade is not recognized when configuring it with the HP ProLiant BL460c Gen9 Server Blade. For additional information please refer to the customer advisory # c04602866

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware firmware firmware 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 cpqsetup.exe cp026361.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1708833979/v107075/cp026361.exe file://./hp/swpackages/cp026361.exe changed Online ROM Flash Component for Windows - Smart Array P230i, P430, P431, P731m, P830i, and P830 Smart Array P230i, P430, P431, P731m, P830i, and P830 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026355.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows - Smart Array Smart Array P230i, P430, P431, P731m, P830i, and P830

Release Version and/or Date:
     2.40

Last Recommended or Critical Version:
     2.40

Previous Version of Firmware:
     2.32

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed in version 2.40:
This firmware release resolved the following issue:

  •  Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1921 103c 323c 103c 1924 cpqsetup.exe cp026355.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p678129589/v107068/cp026355.exe file://./hp/swpackages/cp026355.exe changed Online ROM Flash Component for Windows (x64) - Smart Array P230i, P430, P431, P731m, P830i, and P830 Smart Array P230i, P430, P431, P731m, P830i, and P830 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp026353.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows (x64) - Smart Array Smart Array P230i, P430, P431, P731m, P830i, and P830

Release Version and/or Date:
     2.40

Last Recommended or Critical Version:
     2.40   

Previous Version of Firmware:
     2.32

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed in version 2.40:
This firmware release resolved the following issue:

  •  Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

Known Issues:
     None

]]> firmware firmware firmware firmware firmware firmware 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1921 103c 323c 103c 1924 cpqsetup.exe cp026353.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p775702373/v107066/cp026353.exe file://./hp/swpackages/cp026353.exe changed Online ROM Flash Component for Windows (x64) - Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp026557.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows (x64) - Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841


Release Version and/or Date:
     2.14

Last Recommended or Critical Version:
     2.14

Previous Version of Firmware:
     1.34

Firmware Dependency:
     None

Enhancements/New Features:

  • Servers now power up faster due to improvements in the UEFI controller driver.
  • Logical volume transformations are allowed on controllers without data preservation.
  • Drives can now be hot-added in a zoned configuration.

Problems Fixed:

  • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001
  • When rebuilding a logical volume greater than 2TB in size, the controller might cease to function (POST Lockup 0xE0). Controller would report a POST Lockup 0xE0 error and cease to function, when the following conditions were met:

                 1) Encryption enabled and a re-key operation was in progress.
                 2) While IO was in progress, physical drives failed in an Advanced Data Guarding (RAID6 or RAID60) volume, which caused the volume to go into a degraded state.
                 3) Degraded Mode Performance Optimization was enabled via HP Smart Storage Administrator.

  • If a power outage or brownout occurred while running a volume expansion, the controller might cease to function on the following boot (POST Lockup 0x13).
  • HP D2600/D2700 Disk Enclosures might not show the correct box number on the LED display.
  • Controller might become unresponsive if a drive was re-inserted into encrypted LUN while performing IO on it.
  • When running IO with encryption turned on in remote mode and a local key cache enabled, changing the master key might result in encryption being disabled on the next power up.
  • Controller allowed encryption key changes even with locked volumes.
  • A key restore from an Enterprise Secure Key Manager could take a long time for large configurations.
  • Users were unable to install Red Hat Enterprise Linux 6 Update 5 to a logical volume on an HP P2000 MSA Array System if both an HP H241 and H240 Smart Host Bus Adapter were present in the system.
  • When HP D3700 Disk Enclosures were connected to an HP H240 Smart Host Bus Adapter, the maximum number of enclosures displayed in the boot menu was five, although a maximum of eight enclosures were supported.
  • When a volume expansion or encryption re-key operation was performed, and if multiple power losses or brownouts occurred, data might become inaccessible (POST Message 1769).
  • POST messages 1764, 1768, 1784, 1786, 1787, 1789, 1831 have been updated and/or corrected.

Known Issues:
     None

 

]]> firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca 103c 3239 103c 21c8 cpqsetup.exe cp026557.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1604317020/v107695/cp026557.exe file://./hp/swpackages/cp026557.exe Online ROM Flash Component for Windows - HP Host Bus Adapters H220, H221, H222, H210i and H220i HP HBA(Host Bus Adapters) H220,H221,H222,H210i,H220i Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023629.exe Storage Server Firmware - Storage Controller English (US) Run Smart Component manually in a Microsoft Windows environment:
To update the firmware in an online Microsoft Windows environment, complete the following steps:
  1. Copy the Smart Component to a directory.
  2. From the same directory, run the smart component by double-clicking the Smart Component filename.
  3. When the dialog window displays, click the Install button to start the installation process.
  4. Follow the directions given by the Smart Component.
  5. Review the Smart Component installation log, which is available at %SYSTEMDRIVE%\cpqsystem\log\cpqsetup.log.
  6. System reboot is required for the update to take effect immediately.

Run Smart Component using HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM):
You can either manually run the Smart Component from the SPP to install the firmware or use HP SUM to deploy it.
 

  • Manually deploy the Smart Component:

To manually run the Smart Component, complete the following steps:
 

  1. Mount the ISO.
  2. Go to /hp/swpackages.
  3. Run the Smart Component as noted above.
  4. When the dialog window displays, click the Install button to start the installation process.
  5. Follow the directions given by the Smart Component.
  6. Review the Smart Component installation log as noted above.
  7. Reboot the server for the update to take effect immediately.
  • Deploy the Smart Component using HP SUM:

To deploy the Smart Component using HP SUM, complete the following steps:
 

  1. Download the Smart Component to a directory which can be an existing repository or a directory that can be added as a repository in HP SUM.
  2. Access HP SUM from the latest SPP ISO which can be downloaded from http://www.hp.com/go/spp/download.
  3. Launch hpsum.exe from /hp/swpackages.
    • If the Smart Component is in an existing HP SUM repository, then continue to step 4.
    • If the Smart Component is not in an existing HP SUM repository, on the Source Selection screen, add a repository whose location is where the component is located.
  4. Select the appropriate repository where the Smart Component is located.
  5. Follow the on-screen instructions to update the firmware.
  6. Review the HP SUM installation log which is accessable as a link on the Install/Review Updates screen.
  7. System reboot is required for the update to take effect immediately. 

For more information on the SPP, go to www.hp.com/go/spp/download or www.hp.com/go/spp/documentation.
 
 

]]> Deliverable Name:
     Online ROM Flash Component for Windows HP Host Bus Adapter H220,H221,H222,H210i,H220i

Release Version and/or Date:
     15.10.07.00

Last Recommended or Critical Version:
     15.10.07.00

Previous Version of Firmware:
     15.10.01.00

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed in version 15.10.07.00:

  • Resolves POST error ‘MPT BIOS Fault 13h’. If this error occurs, the system will not boot from any boot device attached to an HP H2xx Host Bus Adapter (HBA) and will be unable to access data on drives attached to the HP H2xx HBA. The fault is triggered if the link between the HP H2xx HBA and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD).

Problems Fixed in version 15.10.07.00 (B):

  • This update includes a digital signature for the component.

Known Issues: 
     None

]]> firmware firmware firmware firmware firmware 1000 0087 1590 0043 1000 0087 1590 0042 1000 0087 1590 0044 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe /t "H220i" /t "H220" /t "H222" /t "H210i" /t "H221" /c cp023629.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p151041816/v98331/cp023629.exe file://./hp/swpackages/cp023629.exe Online ROM Flash Component for Windows - HP Smart Array B320i RAID controller B320i Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023361.exe Storage Server Firmware - Storage Controller English (US) To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows - HP Smart Array B320i RAID controller

Release Version and/or Date:
     15.10.07.00

Last Recommended or Critical Version:
     15.10.07.00

Previous Version of Firmware:
     15.10.01.00

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed in version 15.10.07.00:

  • Resolves POST error ‘MPT BIOS Fault 13h’. If this error occurs, the system will not boot from any boot device attached to an HP Smart Array B320i RAID controller and will be unable to access data on drives attached to the HP Smart Array B320i RAID controller. The fault is triggered if the link between the HP Smart Array B320i RAID controller and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD).

Known Issues: 
     None

]]> firmware firmware 1590 0045 1590 0045 1590 0047 1590 0047 cpqsetup.exe /t "H220i" /t "H210i" /c cp023361.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p2105939986/v97323/cp023361.exe file://./hp/swpackages/cp023361.exe new HP D3600/D3700 12Gb SAS Disk Enclosure ROM Flash Component for Windows D3600, D3700 ROM Flash Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp025879.exe Storage Server Firmware - Storage Controller English (US), Japanese
IMPORTANT: Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.

WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.

NOTE:All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\D3000.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.]]> Windows Smart Component Installation Instructions

This is a self extracting executable module.  One can execute this module via the command line console or from Windows graphical user interface.

GUI Option

  1. Place the downloaded firmware package in a temporary directory.
  2. Using Windows Explorer, navigate to the directory containing the download.
  3. Double click the executable file.
  4. Follow onscreen instructions.
     

CLI Option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /s

 

]]> firmware:QLOGIC firmware:QLOGIC 103c 323b 103c 3353 103c 323b 103c 3352 1000 0087 1590 0043 1000 0087 1590 0042 103c 323c 103c 1923 103c 3239 103c 21c3 D3600 D3700 cpqsetup.exe cp025879.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p1034760544/v105643/cp025879.exe file://./hp/swpackages/cp025879.exe Online ROM Flash Component for Windows - HP D6000 Disk Enclosure D6000 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023795.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows – HP D6000 Disk Enclosure

Release Version and/or Date:
     2.70

Last Recommended or Critical Version:
     2.70

Previous Version of Firmware:
     2.54

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

  • In rare cases, the Smart Array controller would become inaccessible after multiple IO module resets were performed.  If a controller lockup occurred because of this issue, the error code 0xAB would display in the following locations after a subsequent server reboot:
    • Server POST
    • System event log
    • ADU reports / HPSSA diagnostic reports

Known Issues:
     None


]]> firmware:QLOGIC D6000 cpqsetup.exe cp023795.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p40153938/v99058/cp023795.exe file://./hp/swpackages/cp023795.exe Online ROM Flash Component for Windows (x64) - HP D6000 Disk Enclosure D6000 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp023797.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows (x64) – HP D6000 Disk Enclosure

Release Version and/or Date:
     2.70

Last Recommended or Critical Version:
     2.70

Previous Version of Firmware:
     2.54

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

  • In rare cases, the Smart Array controller would become inaccessible after multiple IO module resets were performed.  If a controller lockup occurred because of this issue, the error code 0xAB would display in the following locations after a subsequent server reboot:
    • Server POST
    • System event log
    • ADU reports / HPSSA diagnostic reports

Known Issues:
     None


]]> firmware:QLOGIC D6000 cpqsetup.exe cp023797.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p907210918/v99060/cp023797.exe file://./hp/swpackages/cp023797.exe HP D2600/D2700 6Gb SAS Disk Enclosure ROM Flash Component for Windows D2600, D2700 ROM Flash Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) Microsoft Windows Server 2012 R2 cp024273.exe Storage Firmware - Storage Controller English (US), Japanese IMPORTANT: Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.

WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.

NOTE: When disk enclosures are cascaded, I/O module A of one enclosure is connected to I/O module A of the subsequent enclosure. During a firmware update, I/O module A in the cascaded disk enclosures is automatically updated.

NOTE: In dual-domain configurations, both I/O modules of the target disk enclosure and cascaded disk enclosures are automatically updated during the firmware installation process.

NOTE: All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log for Array Configurations and %systemdrive%\CPQSYSTEM\Log\MSA-D2000.log for Smart Array configurations and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

]]> Firmware installation instructions for Smart Array configurations

Firmware is embedded in the downloaded file, which is a self-extracting, executable module. Execute this module from the command line console or the Windows graphical user interface.
  1. Place the downloaded file in a temporary directory.
  2. From the same directory, invoke the Smart Component in the command line console or double-click the cpxxxxxx.exe file. (cpxxxxxx.exe represents the downloaded file.)
  3. Follow the on-screen instructions provided by the installer.
  4. Make sure the "Flash using network" box in the second dialog window is "unchecked".
Special installation instructions for single-domain environments

In a single domain configuration, I/O module A (top module) is connected to a SmartArray controller and I/O module B (bottom module) is unused. Even though the bottom I/O module is unused, both modules must have the same firmware version installed. Do the following to make sure that BOTH I/O modules are updated:
  1. Flash I/O module A of the first and all cascaded disk enclosures using the firmware upgrade executable.
  2. After I/O module A is flashed successfully in the disk enclosures, shut down and turn off the server.
  3. Remove A/C power to the first and all cascaded disk enclosures.
  4. Label all cables connected to I/O module A of the first and all cascaded disk enclosures and then disconnect all cables from the I/O modules.
  5. Swap the positions of the I/O modules in the enclosure.
  6. Reconnect the cables to the top I/O module (it used to be the bottom I/O module) in the enclosure, using the labels to ensure that all cabling is connected properly, in the same configuration as before.
  7. Turn on the storage enclosures and wait for them to complete their startup routines.
  8. Turn on the server.
  9. After the server startup procedure is complete, flash the top I/O module (the new I/O module A) of first and all cascaded disk enclosures using the firmware upgrade executable.
  10. After the I/O module is flashed successfully in the disk enclosures, power cycle the server to resume normal operation.

Firmware installation instructions for MSA 2040/1040 and P2000 G3 Array Configurations

  1. Place the downloaded file in a temporary directory.
  2. Using Windows Explorer, navigate to the temporary directory containing the download.
  3. Double click the executable file
  4. When prompted:
    • Check Flash using network
    • Enter target information of the disk enclosure, including its IP address and a username and password for an account with management access rights.
    • Follow remaining onscreen instructions

Installation Notes and Best Practices

  • Before installing new firmware, review system requirements, enhancements list, fixes list, and other information in the firmware release notes, device QuickSpecs, and updated user documentation.
  • Before installing new firmware, ensure that the system is stable and is not being reconfigured or changed in any way. If changes are in progress, monitor them and wait until they are completed before proceeding with the upgrade.
  • Before installing new firmware, HP recommends creating a full backup of all data stored on the enclosure.
  • When planning for a firmware update, schedule an appropriate time to perform an the update. Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.
  • After the installation process, verify system status in the software tools and confirm that the new firmware version is displayed as running on the enclosure.

Please refer to the Release Notes for more details.

]]> firmware:QLOGIC firmware:QLOGIC 103C 323A 103C 3241 103C 323A 103C 3247 103c 323a 103c 3249 D2600 SAS AJ940A D2700 SAS AJ941A P2000 G3 FC P2000 G3 FC P2000G3 FC/iSCSI P2000G3 FC/iSCSI P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 SAS P2000 G3 SAS 103c 323b 103c 3353 103c 323b 103c 3352 103c 323b 103c 3350 1000 0087 1590 0043 1000 0087 1590 0042 103c 323c 103c 1923 MSA 2040 SAN MSA 2040 SAN MSA 2040 SAS MSA 2040 SAS MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN cpqsetup.exe /iCAMSPR0149_6G_app_4MB_ai.pmc /v0149 /t"D2600 SAS AJ940A" /t"D2700 SAS AJ941A" /t"260 SAS AJ940A" /t"270 SAS AJ941A" /t"D2x00 Disk Enc." /t"MDS260 CAMARO" /t"MDS270 CAMARO" cp024273.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p1494441545/v100588/cp024273.exe file://./hp/swpackages/cp024273.exe Online ROM Flash Component for Windows - HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP ProLiant Gen8 expander Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022116.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

Release Version and/or Date:
     3.30

Last Recommended or Critical Version:
     3.30

Previous Version of Firmware:
     3.14

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

  • Fixed an issue with the SAS connector element which reported invalid connector type/physical link for disabled PHYs.
  • Fixed the Logical Link Rate because the Rate was not set properly when PHY is disabled.

Known Issues:
     None

]]> firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC cpqsetup.exe cp022116.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p2105984865/v93082/cp022116.exe file://./hp/swpackages/cp022116.exe Online ROM Flash Component for Windows (x64) - HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP ProLiant Gen8 expander Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp023330.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
  • Locate Start.html which is found in the root of the ISO
  • Open the html file in a supported browser
  • Follow the instructions on the screen
]]> Deliverable Name:
     Online ROM Flash Component for Windows (x64) – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

Release Version and/or Date:
     3.30

Last Recommended or Critical Version:
     3.30

Previous Version of Firmware:
     3.14

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

  • Fixed an issue with the SAS connector element which reported invalid connector type/physical link for disabled PHYs.
  • Fixed the Logical Link Rate because the Rate was not set properly when PHY is disabled.

Known Issues:
     None

]]> firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC cpqsetup.exe cp023330.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1145576297/v97244/cp023330.exe file://./hp/swpackages/cp023330.exe changed HP StoreEver Tape Firmware for Microsoft Windows HP StoreEver Tape Firmware for Microsoft Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Vista (32-bit) Microsoft Windows Vista (64-bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows 7 (32-bit) - All Editions Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Vista Business (32-bit) Microsoft Windows Vista Business (64-bit) Microsoft Windows Vista Enterprise (32-bit) Microsoft Windows Vista Enterprise (64-bit) Microsoft Windows 7 Professional (32-bit) Microsoft Windows 7 Professional (64-bit) Microsoft Windows 7 Enterprise (32-bit) Microsoft Windows 7 Enterprise (64-bit) Microsoft Windows Server 2012 Microsoft Windows 8 (64-bit) Microsoft Windows 8 (32-bit) Microsoft Windows 8.1 (64-bit) Microsoft Windows Server 2012 R2 cp025421.exe Storage ServerOptions Server Firmware - Storage Tape English (US) Method I : Upgrade All (default)

This method allows user to upgrade all tape drives attached to the server. Simply run the component by issuing following command.

C:\CPxxxxxx.exe

Method II : Discover and Upgrade (advanced users only)

This method gives user more control over firmware manipulation by giving user following options

  1. Besides upgrade it also allows user to downgrade or rewrite firmware to the tape drive.
  2. In case of multiple tape drives attached, let user pick individual tape drive.

Steps

  1. Discover - C:\tmp\CPxxxxxx.exe /d c:\tmp\DiscoveredDrives.xml
  2. Modify <action> tag in xml to be 'upgrade|downgrade|rewrite|skip' as desired.
  3. Upgrade (or Downgrade, Rewrite) - C:\CPxxxxxx.exe /u c:\tmp\DiscoveredDrives.xml
  4. Results are in c:\cpqsetup\log\setup.log
  5. Notes
    • Please specify full path with /d and /u options for xml file.

Usage:

CPxxxxxx.exe [options]

[options] 

 /d /discover <filepath\filename.xml> Discover and place results in xml file.
 /u /upgrade  <filepath\filename.xml> Upgrade from selected tape drives in xml file.
 /a /all    Discover and upgrade all tape drives.
 /s /silent    Silent exeuction.
 /v /verbose    Verbose exeuction.
 /h /help    Display this usage information.
 default (no arguments) Discover and upgrade all attached tape drives.

]]> firmware:tape %systemroot%\system32\ 0x80090200 0x80050200 0x000A0013 0x000A0003 ven_hp&dev_SCSI\SequentialHP______DAT72X6_________&subsys_SCSI\SequentialHP______DAT72X6_________ 0x00080013 0x00080003 0x00080023 0x80040200 0x80020200 0x80050200 0x80000100 0x80070200 0x80090200 0x80000200 0x80020300 0x80010300 0x80050300 0x000C0013 0x000C0023 0x80010400 0x80010500 0x80030400 0x80010500 0x80010500 0x80030500 0x80030500 cpqsetup.exe cp025421.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p368283668/v104020/cp025421.exe file://./hp/swpackages/cp025421.exe new Online ROM Flash Component for Windows - HP Integrated Lights-Out 2 Online ROM Flash Component for Windows - HP Integrated Lights-Out 2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Server 2008 R2 cp025665.exe Lights Out Server Firmware - Lights-Out Management English (US) Install the firmware using one of these options:

  • Run the Component on the host to be updated.
    The component will update the iLO 2 firmware and reset the iLO 2 processor.

  •  Extract the firmware from the component.  This will place the firmware image file, iLo2_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have these options:
    • Login to iLO 2, navigate to the Update Firmware page, and update the firmware from there.
    • Use the HP Lights-Out Configuration Utility, CPQLOCFG, and RIBCL/XML scripts to update iLO 2 across the network.
    • Use the HP Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 2 from the supported host OS.
    • Use the Directory Migration Utility to perform network discovery of Lights-Out processors, import/export Management Processor information, and bulk firmware updates. It is not necessary to perform a directory migration to use this additional functionality. This Utility is contained in the HP Directories Support for Management Processors software, which is available on www.hp.com/go/ilo -> Support & Downloads -> Select a Microsoft Windows Operating System -> Software: Lights-Out Management.
]]> firmware:ilo2 0E11 B204 103C 3304 0E11 B204 103C 3305 cpqsetup.exe cp025665.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p915269626/v104865/cp025665.exe file://./hp/swpackages/cp025665.exe changed Online ROM Flash Component for Windows - HP Integrated Lights-Out 3 Online ROM Flash Component for Windows - HP Integrated Lights-Out 3 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025438.exe Lights Out Server Firmware - Lights-Out Management English (US)
Linux:      ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1255562964/v64722
Windows: ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p901462262/v64721
Win64:     ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v64720]]>
Install the firmware using one of these options:

  • Run the Component on the host to be updated.
    The component will update the iLO 3 firmware and reset the iLO 3 processor.


  • Extract the firmware from the component.  This will place the firmware image file, iLO3_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have these options:
    • Login to iLO 3, navigate to the Update Firmware page, and update the firmware from there.
    • Use the HP Lights-Out Configuration Utility, CPQLOCFG, HPQLOCFG, and RIBCL/XML scripts to update iLO 3 across the network.
    • Use the HP Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 3 from the supported host OS.
    • Use the Directory Migration Utility, contained in the HP Directories support for Management Processors, available under Software and Drivers on the iLO 3 downloads page from hp.com.  The Windows utility supports  network discovery of lights-out processors, import/export, as well as bulk firmware update, and does not require directory migration.
]]> firmware:ilo3 103c 3307 103c 3309 103c 3307 103c 330e cpqsetup.exe cp025438.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1539977532/v104115/cp025438.exe file://./hp/swpackages/cp025438.exe changed Online ROM Flash Component for Windows - HP Integrated Lights-Out 4 Online ROM Flash Component for Windows - HP Integrated Lights-Out 4 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024537.exe Lights Out Server Firmware - Lights-Out Management English (US)   of the iLO utilities:
 
  • HPQLOCFG 1.3.0 (replaced CPQLOCFG)
  • HP Lights-Out XML Scripting Sample 4.50 bundle
  • HPONCFG 4.5.0.0 (Windows)
  • HPONCFG 4.4.0.0 (Linux)
  • LOCFG.PL 4.50 (included in the HP Lights-Out XML Scripting Sample bundle)
  • HPLOMIG 4.50 (upgrade HPLOMIG before installing this version of iLO 4)
]]>
Install the firmware using one of these options:

  • Run the Component on the host to be updated.
    The component will update the iLO 4 firmware and reset the iLO 4 processor.

  •  Extract the firmware from the component.  This will place the firmware image file, iLO4_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have these options:
    • Login to iLO 4, navigate to the Update Firmware page, and update the firmware from there.
    • Use the HP Lights-Out Configuration Utility, CPQLOCFG, and RIBCL/XML scripts to update iLO 4 across the network.
    • Use the HP Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 4 from the supported host OS.
    • Use the Directory Migration Utility, contained in the HP Directories support for Management Processors, available under Software and Drivers on the iLO 4 downloads page from hp.com.  The Windows utility supports  network discovery of lights-out processors, import/export, as well as bulk firmware update, and does not require directory migration.
]]>  

iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hp.com/go/ilo

Select your lights-out product, then support & documents, then manuals.

  • Check the online help for additional information about how to use features. 
    Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
]]> firmware:ilo4 103C 3307 103C 3381 103C 3306 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 cpqsetup.exe cp024537.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1267515540/v101193/cp024537.exe file://./hp/swpackages/cp024537.exe new HP Broadcom Online Firmware Upgrade Utility for Windows Server 2008 HP Broadcom Online Firmware Upgrade Utility for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024565.exe Networking Server Firmware - Network English (US), Japanese
  • HP Broadcom 1Gb Driver for Windows Server 2008, version 16.8.0.4 or later
  • HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008, version 7.8.50.0(D) or later
  • HP Broadcom 10/20GbE Multifunction Drivers for Windows Server 2008, version 7.10.70.0 or later
]]> From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

]]>
NIC Boot Code Version PXE Version CLP Version iSCSI Version IPMI Version NCSI Version FCoE Version UEFI Version CCM Version L2 Version
HP NC107i PCIe Gigabit Server Adapter 3.35 n/a n/a n/a 8.07 n/a n/a n/a n/a n/a
HP NC325m PCIe Quad Port Gigabit Server Adapter 3.28 n/a 1.3.6 n/a n/a n/a n/a n/a n/a n/a
HP Ethernet 1Gb 2-port 330i Adapter (18D2) 1.61 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
HP Ethernet 1Gb 4-port 331i Adapter (3372)
HP Ethernet 1Gb 4-port 331i-SPI Adapter		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 2-port 332i Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 2-port 332T Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
HP NC373F PCIe Multifunction Gigabit Server Adapter
HP NC373T PCIe Multifunction Gigabit Server Adapter		 1.9.6 2.8.5 n/a n/a n/a n/a n/a n/a n/a n/a
HP NC382i DP Multifunction Gigabit Server Adapter 5.2.3 n/a n/a 7.4.2 n/a 2.0.12 n/a n/a n/a n/a
HP NC382m DP 1GbE Multifunction BL-c Adapter 5.2.3 4.6.10 n/a 3.1.7 n/a n/a n/a n/a n/a n/a
HP NC382T PCIe DP Multifunction Gigabit Server Adapter 5.2.3 5.2.4 n/a 4.2.10 n/a n/a n/a n/a n/a n/a
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530SFP+ Adapter
HP Ethernet 10Gb 2-port 530T Adapter		 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) 6.2.28 n/a n/a 3.1.5 n/a n/a n/a n/a n/a n/a
HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) 6.2.28 n/a n/a 4.2.10 n/a n/a n/a n/a n/a n/a
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter 6.2.28 7.0.53 n/a 7.4.2 n/a n/a n/a n/a n/a n/a
HP Ethernet 10Gb 2-port 533FLR-T Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
HP FlexFabric 10Gb 2-port 534FLB Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534M Adapter
HP StoreFabric CN1100R Dual Port Converged Network Adapter		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31
HP FlexFabric 20Gb 2-port 630FLB Adapter
HP FlexFabric 20Gb 2-port 630M Adapter		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31

]]> firmware:nic 14E4 16AC 103C 703D 14E4 1679 103C 170C 14E4 164C 103C 7037 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 1657 103C 169D 14E4 168E 103C 3382 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 168E 103C 339D 14E4 1657 103C 1904 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 165F 103C 2133 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 1650 103C 3654 14E4 16AE 103C 1798 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16AE 103C 3382 14E4 1639 103C 7055 cpqsetup.exe cp024565.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1577638049/v101259/cp024565.exe file://./hp/swpackages/cp024565.exe new HP Broadcom Online Firmware Upgrade Utility for Windows Server x64 Editions HP Broadcom Online Firmware Upgrade Utility for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp024566.exe Networking Server Firmware - Network English (US), Japanese
  • HP Broadcom 1Gb Driver for Windows Server x64 Editions, version 16.8.0.4 or later
  • HP Broadcom 1Gb Multifunction Drivers for Windows Server x64 Editions, version 7.8.50.0(E) or later
  • HP Broadcom 10/20GbE Multifunction Drivers for Windows Server x64 Editions, version 7.10.70.0 or later
]]>

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

]]>
NIC Boot Code Version PXE Version CLP Version iSCSI Version IPMI Version NCSI Version FCoE Version UEFI Version CCM Version L2 Version
HP NC107i PCIe Gigabit Server Adapter 3.35 n/a n/a n/a 8.07 n/a n/a n/a n/a n/a
HP NC325m PCIe Quad Port Gigabit Server Adapter 3.28 n/a 1.3.6 n/a n/a n/a n/a n/a n/a n/a
HP Ethernet 1Gb 2-port 330i Adapter (18D2) 1.61 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 2-port 330i Adapter (22BD) 2.05 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331T Adapter		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 4-port 331i-SPI Adapter		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 2-port 332i Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
HP Ethernet 1Gb 2-port 332T Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
HP NC373F PCIe Multifunction Gigabit Server Adapter
HP NC373T PCIe Multifunction Gigabit Server Adapter		 1.9.6 2.8.5 n/a n/a n/a n/a n/a n/a n/a n/a
HP NC382i DP Multifunction Gigabit Server Adapter 5.2.3 n/a n/a 7.4.2 n/a 2.0.12 n/a n/a n/a n/a
HP NC382m DP 1GbE Multifunction BL-c Adapter 5.2.3 4.6.10 n/a 3.1.7 n/a n/a n/a n/a n/a n/a
HP NC382T PCIe DP Multifunction Gigabit Server Adapter 5.2.3 5.2.4 n/a 4.2.10 n/a n/a n/a n/a n/a n/a
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 10Gb 2-port 530SFP+ Adapter
HP Ethernet 10Gb 2-port 530T Adapter		 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) 6.2.28 n/a n/a 3.1.5 n/a n/a n/a n/a n/a n/a
HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) 6.2.28 n/a n/a 4.2.10 n/a n/a n/a n/a n/a n/a
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter 6.2.28 7.0.53 n/a 7.4.2 n/a n/a n/a n/a n/a n/a
HP Ethernet 10Gb 2-port 533FLR-T Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
HP FlexFabric 10Gb 2-port 534FLB Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534M Adapter
HP StoreFabric CN1100R Dual Port Converged Network Adapter		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31
HP FlexFabric 10Gb 2-port 536FLB Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
HP FlexFabric 20Gb 2-port 630FLB Adapter
HP FlexFabric 20Gb 2-port 630M Adapter		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31

]]> firmware:nic 14E4 16AC 103C 703D 14E4 1679 103C 170C 14E4 164C 103C 7037 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 1657 103C 169D 14E4 168E 103C 3382 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 168E 103C 339D 14E4 1657 103C 1904 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 165F 103C 2133 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 1650 103C 3654 14E4 16AE 103C 1798 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16AE 103C 3382 14E4 1665 103C 22BD 14E4 16A2 103C 22FA 14E4 1657 103C 22BE 14E4 16A4 103C 22FA 14E4 1639 103C 7055 cpqsetup.exe cp024566.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1087189961/v101260/cp024566.exe file://./hp/swpackages/cp024566.exe changed HP Intel Online Firmware Upgrade Utility for Windows Server 2008 HP Intel Online Firmware Upgrade Utility for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp025290.exe Networking Server Firmware - Network English (US), Japanese
  • HP Intel E1R Driver for Windows Server 2008, package version 12.7.29.0(C) or later
  • HP Intel ixn/ixt Drivers for Windows Server 2008, package version 3.5.22.0(D) or later
]]> From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

]]> firmware:nic 8086 10F8 103C 18D0 8086 1523 103C 339F 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 1521 103C 17D1 8086 1528 103C 192D 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1523 103C 1989 8086 1521 103C 2003 8086 10FB 103C 2159 8086 1521 103C 2226 cpqsetup.exe cp025290.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p914216596/v103631/cp025290.exe file://./hp/swpackages/cp025290.exe changed HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions HP Intel Online Firmware Upgrade Utility for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp025291.exe Networking Server Firmware - Network English (US), Japanese
  • HP Intel E1R Driver for Windows Server 2008 x64 Editions, package version 12.7.29.0(C) or later
  • HP Intel E1R Driver for Windows Server 2008 R2, package version 12.11.97.0 or later
  • HP Intel E1R Driver for Windows Server 2012, package version 12.11.97.0 or later
  • HP Intel E1R Driver for Windows Server 2012 R2, package version 12.11.97.0 or later
  • HP Intel ixn/ixt Drivers for Windows Server 2008 x64 Editions, package version 3.5.22.0(D) or later
  • HP Intel ixn/ixt Drivers for Windows Server 2008 R2, version 3.9.58.9101 or later
  • HP Intel ixn/ixt Drivers for Windows Server 2012, version 3.9.58.9101 or later
  • HP Intel ixn/ixt Drivers for Windows Server 2012 R2, version 3.9.58.9101 or later
]]>

From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

]]> firmware:nic 8086 10F8 103C 18D0 8086 1523 103C 339F 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 1521 103C 17D1 8086 1528 103C 192D 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 10FB 103C 2159 cpqsetup.exe cp025291.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p575391287/v103632/cp025291.exe file://./hp/swpackages/cp025291.exe changed HP QLogic P3P Online Firmware Upgrade Utility for Windows Server 2008 HP QLogic P3P Online Firmware Upgrade Utility for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp026022.exe Networking Server Firmware - Network English (US), Japanese HP QLogic P3P Multifunction Driver for Windows Server 2008, version 5.3.30.1001 or later, be installed before firmware can be updated.]]> From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

]]> firmware:nic 1077 8020 103C 3346 1077 8020 103C 3733 1077 8020 103C 1957 cpqsetup.exe cp026022.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p277123724/v106093/cp026022.exe file://./hp/swpackages/cp026022.exe changed HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp026023.exe Networking Server Firmware - Network English (US), Japanese
  • HP QLogic P3P Multifunction Driver for Windows Server 2008 x64 Editions, version 5.3.30.1001 or later
  • HP QLogic P3P Multifunction Driver for Windows Server 2008 R2, version 5.3.30.1001 or later
  • HP QLogic P3P Multifunction Driver for Windows Server 2012, version 5.3.30.1001 or later
  • HP QLogic P3P Multifunction Driver for Windows Server 2012 R2, version 5.3.30.1001 or later
    • ]]>

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    Network connectivity may stop during the upgrade process and may need to be restarted after completion.

    ]]>         firmware:nic 1077 8020 103C 3346 1077 8020 103C 3733 1077 8020 103C 1957 cpqsetup.exe cp026023.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1864077016/v106094/cp026023.exe file://./hp/swpackages/cp026023.exe     HP QLogic P3 Online Firmware Upgrade Utility for Windows Server 2008 HP QLogic P3 Online Firmware Upgrade Utility for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp023400.exe Networking Server Firmware - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    Network connectivity may stop during the upgrade process and may need to be restarted after completion.

    ]]>         This software package contains firmware version 4.0.596.

    ]]>         firmware:nic 4040 0100 103c 1740 4040 0100 103C 705A cpqsetup.exe cp023400.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p696224965/v97507/cp023400.exe file://./hp/swpackages/cp023400.exe     HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp023401.exe Networking Server Firmware - Network English (US), Japanese
    • HP QLogic P3P Multifunction Driver for Windows Server 2008 x64 Editions, version 5.3.26.605 or later
    • HP QLogic P3P Multifunction Driver for Windows Server 2008 R2, version 5.3.26.605 or later
    • HP QLogic P3P Multifunction Driver for Windows Server 2012, version 5.3.26.605 or later
    • HP QLogic P3P Multifunction Driver for Windows Server 2012 R2, version 5.3.26.605 or later
    ]]>

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    Network connectivity may stop during the upgrade process and may need to be restarted after completion.

    ]]>         This software package contains firmware version 4.0.596.

    ]]>         firmware:nic 4040 0100 103c 1740 4040 0100 103C 705A cpqsetup.exe cp023401.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1278832363/v97508/cp023401.exe file://./hp/swpackages/cp023401.exe     changed HP Firmware Online Flash for QLogic BR-series Fibre Channel Host Bus Adapters - Windows 2008 R2/2012/2012 R2 (x64) HP Firmware Flash for QLogic BR-series Fibre Channel HBAs - Online Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp025186.exe ServerOptions Networking Firmware - Storage Fibre Channel English (US) The HP supplied QLogic BR-series driver must be installed prior to this firmware component being identified by HP SUM for deployment.  The software is available from www.hp.com/go/fchba.  Select your product and then select the Software and Drivers page to find the required driver.  The HP Brocade driver is also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.
    • HP Storage x64 QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2008 R2, version 3.2.5.0, cp025314.exe
    • HP Storage x64 QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2012, version 3.2.5.0, cp025313.exe
    • HP Storage x64 QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2012 R2, version 3.2.5.0, cp025052.exe
    ]]>         Download the firmware component file to a directory on the target system.
    The downloaded file is a self-extracting executable with a filename based on the Component Number.
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
     

    ]]>         firmware:brocade 1657 0013 1657 0014 1657 0017 1657 0014 1657 0017 103c 1743 1657 0013 103c 1742 1657 0021 103c 1779 cpqsetup.exe cp025186.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1812610092/v103230/cp025186.exe file://./hp/swpackages/cp025186.exe     changed HP Firmware Online Flash for QLogic Fibre Channel Host Bus Adapters - Windows 2008 (x86) HP Firmware Flash for QLogic Fibre Channel HBA's - Online (x86) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024191.exe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) www.hp.com/go/fchba and www.hp.com/go/cna.  Select your product and then select the Software and Drivers page to find the required driver.]]> www.hp.com/go/spp/download:
    • HP Storage Fibre Channel Adapter Kit for the x86 QLogic Storport Driver v9.1.12.22, cp024461.exe

    • HP Storage Fibre Channel Over Ethernet Adapter Kit for the x86 QLogic Storport Driver v9.1.12.10, cp024630.exe
    ]]>         firmware:qlogic 1077 2312 0E11 0103 1077 2432 103C 7040 1077 2432 103C 7041 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2322 8086 34BC 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 cpqsetup.exe cp024191.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p721367119/v100383/cp024191.exe file://./hp/swpackages/cp024191.exe     changed HP Firmware Online Flash for QLogic Fibre Channel Host Bus Adapters - Windows 2008/2012 (x64) HP Firmware Flash for QLogic Fibre Channel HBAs - Online (x64) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Storage Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024192.exe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) www.hp.com/go/fchba and www.hp.com/go/cna.  Select your product and then select the Software and Drivers page to find the required driver.]]> www.hp.com/go/spp/download:
    • HP Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver v9.1.12.22, cp024462.exe
    • HP Storage Fibre Channel Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.12.22, cp024463.exe

    • HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver v9.1.12.10, cp024631.exe
    • HP Storage Fibre Channel Over Ethernet Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 v9.1.12.10, cp024632.exe
    ]]>         firmware:qlogic 1077 2532 103C 338E 1077 2532 103C 3263 1077 2532 103C 3262 1077 2432 103C 7041 1077 2432 103C 7040 1077 2532 103C 3261 1077 2432 103C 1705 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 cpqsetup.exe cp024192.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p2131558985/v100384/cp024192.exe file://./hp/swpackages/cp024192.exe     changed HP Firmware Online Flash for Emulex Fibre Channel Host Bus Adapters - Windows 2008 x86 HP Firmware Flash for Emulex Fibre Channel HBAs x86 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024660.exe ServerOptions Networking Storage Server Firmware - Storage Fibre Channel English (US) The HP supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver v10.2.370.8 cp024666.exe
     

    ]]>         From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. ]]>         firmware:emulex 10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 3282 10DF F100 103C 3281 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 1956 10DF F100 103C 2238 cpqsetup.exe cp024660.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p833344659/v101481/cp024660.exe file://./hp/swpackages/cp024660.exe     changed HP Firmware Online Flash for Emulex Fibre Channel Host Bus Adapters - Windows 2008/2012/2012 R2 x64 HP Firmware Flash for Emulex Fibre Channel HBAs x64 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 cp024659.exe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) The HP supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver v10.2.370.8 cp024667.exe
     

    ]]>         From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. ]]>         firmware:emulex 10DF E200 103C 1956 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 3282 10DF F100 103C 3281 10DF F100 103C 2238 cpqsetup.exe cp024659.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p381734675/v101480/cp024659.exe file://./hp/swpackages/cp024659.exe     changed HP Firmware Flash for Emulex Converged Network Adapters - Windows (x86) HP Firmware Flash for Emulex CNAs x86 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024656.exe Networking Server Firmware - Network English (US) The HP supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Storage Fibre Channel Over Ethernet Adapter Kit for the x86 Emulex Storport Driver v10.2.370.8 cp024669.exe

    The HP supplied Emulex NIC driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Emulex 10GbE Driver for Windows Server 2008 x86 Editions v10.2.478.1 cp024640.exe

    ]]>         From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. ]]>         firmware:emulex 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0700 103c 3314 19a2 0704 103c 3314 19a2 0702 103c 3314 19a2 0700 103c 1747 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0712 103C 337B 19a2 0700 103c 1746 cpqsetup.exe cp024656.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p399844033/v101477/cp024656.exe file://./hp/swpackages/cp024656.exe     changed HP Firmware Flash for Emulex Converged Network Adapters - Windows (x64) HP Firmware Flash for Emulex CNAs x64 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 cp025740.exe Networking Firmware - Network English (US) The HP supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 Emulex Storport Driver v10.2.370.8 cp024668.exe

    The HP supplied Emulex NIC driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:

    HP Emulex 10GbE Driver for Windows Server 2008 x64 Editions v10.2.478.1 cp024641.exe
    HP Emulex 10GbE Driver for Windows Server 2008 R2 v10.2.478.1 cp024642.exe
    HP Emulex 10Gbe Driver for Windows Server 2012 v10.2.478.1 cp024638.exe
    HP Emulex 10Gbe Driver for Windows Server 2012 R2 v10.2.478.1 cp024639.exe
     

    ]]>         From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. ]]>         firmware:emulex 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0700 103c 3314 19a2 0704 103c 3314 19a2 0702 103c 3314 19a2 0700 103c 1747 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0712 103C 337B 19a2 0700 103c 1746 10DF 0720 103C 21D4 10DF 0722 103C 21D4 10DF 0724 103C 21D4 10DF 0720 103C 1935 10DF 0724 103C 1935 10DF 0722 103C 1935 10DF 0720 103C 1934 10DF 0724 103C 1934 10DF 0722 103C 1934 10DF 0720 103C 220A 10DF 0724 103C 220A 10DF 0722 103C 220A 10DF 0720 103C 803F cpqsetup.exe cp025740.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1035647964/v105235/cp025740.exe file://./hp/swpackages/cp025740.exe     new Online Firmware Upgrade Utility (Windows x64) for HP Mellanox Ethernet only adapters Online Firmware Upgrade Utility (Windows x64) for HP Mellanox Ethernet only adapters Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp025806.exe Networking Server Firmware - Network English (US) From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.

    ]]>         This software package contains the following firmware versions:

    InfiniBand Card Type Firmware Version PSID
    HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) 2.32.5430 HP_1200111023
    HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) 2.32.5430 HP_2240110004

     

    ]]>         firmware:nic 15B3 1007 103C 8020 15B3 1007 103C 801F cpqsetup.exe cp025806.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1181185466/v105439/cp025806.exe file://./hp/swpackages/cp025806.exe     new Online Firmware Upgrade Utility (Windows x64) for HP Mellanox VPI (Ethernet and Infiniband mode) devices on Windows x86_64 platform Online Firmware Upgrade Utility (Windows x64) for HP Mellanox VPI (Ethernet and Infiniband mode) devices. Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024893.exe Networking Server Firmware - Network English (US) From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.

    ]]>         This software package contains the following firmware versions:
     

    InfiniBand Card Type Firmware Version PSID
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter 2.32.5100 HP_0240230019
    HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter 2.32.5100 HP_0250230018
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter 2.32.5100 HP_0280210019
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter 2.32.5100 HP_0230240019
    HP_0230220019
    HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter 2.32.5100 HP_0230240009
    HP_0230220009
    HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter 2.32.5270 HP_1350110023
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter 2.32.5230 HP_1360110017
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter 2.32.5200 HP_1370110017
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter 2.32.5290 HP_1380110017
    HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter 2.32.5290 HP_1390110023
    HP Infiniband QDR/Ethernet 10Gb 2P 544i Adapter 2.30.3200 HP_0280110018
    HP XL230b Gen9 InfiniBand FDR/Ethernet 40Gb 2-port 544+i Adapter 2.32.5270 HP_2020110019

    ]]>         firmware:nic 15B3 1003 103C 18D6 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F2 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15B3 1003 103C 18CD 15B3 1003 103C 1777 15B3 1003 103C 18CF 15B3 1003 103C 18CE 15B3 1007 103C 800F 15B3 1003 103C 17C9 cpqsetup.exe cp024893.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p171420294/v102188/cp024893.exe file://./hp/swpackages/cp024893.exe     new Online ROM Flash Component for Windows (x64) - HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP Proliant Gen9 expander Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows HPC Server 2008 R2 cp025636.exe ServerOptions Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows – HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         1.31


    Last Recommended or Critical Version:
         1.31

    Previous Version of Firmware:
         1.01

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Firmware now reads the max link rate from the backplane NVRAM and sets the rate accordingly. The expander firmware will adjust the SAS links to the appropriate speed based on the backplane type. The firmware will not try to force slower backplanes to higher link rates.


    Problems Fixed:

    • On rare occasions, incorrect data may be read or written while a controller is rebuilding a drive.
    • Disabled Edge-Buffering to address a rare data integrity issue seen with a drive that had bad blocks.
    • In rare instances, on an HP ProLiant Gen9 series server, the Smart Array controller would detect an HP Hard Disk Drive (HDD) as a non-HP drive. For additional information please refer to the customer advisory # c04597377

    Known Issues:
         None

    ]]>         firmware:QLOGIC cpqsetup.exe cp025636.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p493653521/v104781/cp025636.exe file://./hp/swpackages/cp025636.exe     Online ROM Flash Component for Windows - HP ProLiant DL585 G2/DL585 G5/DL585 G6 (A07) Servers HP ProLiant DL585 G2/DL585 G5/DL585 G6 (A07) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 cp023990.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023990.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p796082590/v99825/cp023990.exe file://./hp/swpackages/cp023990.exe     Online ROM Flash Component for Windows - HP ProLiant DL785 G5/DL785 G6 (A15) Servers HP ProLiant DL785 G5/DL785 G6 (A15) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 cp023992.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023992.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1158038066/v99830/cp023992.exe file://./hp/swpackages/cp023992.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL585 G7 (A16) Servers HP ProLiant DL585 G7 (A16) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024413.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024413.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1104310012/v100855/cp024413.exe file://./hp/swpackages/cp024413.exe     Online ROM Flash Component for Windows - HP ProLiant DL385 G7 (A18) Servers HP ProLiant DL385 G7 (A18) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp023997.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023997.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p739969197/v99836/cp023997.exe file://./hp/swpackages/cp023997.exe     Online ROM Flash Component for Windows - HP ProLiant DL385 G5p/DL385 G6 (A22) Servers Online ROM Flash Component for Windows - HP ProLiant DL385 G5p/DL385 G6 (A22) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 cp023995.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023995.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1353133035/v99834/cp023995.exe file://./hp/swpackages/cp023995.exe     Online ROM Flash Component for Windows - HP ProLiant SL335s G7 (A24) Servers HP ProLiant SL335s G7 (A24) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024000.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024000.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1306926846/v99839/cp024000.exe file://./hp/swpackages/cp024000.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows MultiPoint Server 2011 Microsoft Windows Server 2012 R2 cp024546.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024546.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1008378544/v101219/cp024546.exe file://./hp/swpackages/cp024546.exe     Online ROM Flash Component for Windows - HP ProLiant SL4545 G7 (A31) Servers HP ProLiant SL4545 G7 (A31) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 cp024001.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024001.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p381124276/v99841/cp024001.exe file://./hp/swpackages/cp024001.exe     Online ROM Flash Component for Windows - HP ProLiant ML350 G6 (D22) Servers HP ProLiant ML350 G6 (D22) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024002.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024002.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1445188623/v99844/cp024002.exe file://./hp/swpackages/cp024002.exe     Online ROM Flash Component for Windows - HP ProLiant ML110 G7/DL120 G7 (J01) Servers HP ProLiant ML110 G7/DL120 G7 (J01) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Small Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024022.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp024022.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p375044589/v99895/cp024022.exe file://./hp/swpackages/cp024022.exe     changed Online ROM Flash Component for Windows - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024408.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024408.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1406735164/v100848/cp024408.exe file://./hp/swpackages/cp024408.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024422.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024422.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1953923464/v100868/cp024422.exe file://./hp/swpackages/cp024422.exe     Online ROM Flash Component for Windows - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 cp022263.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp022263.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1147524470/v93656/cp022263.exe file://./hp/swpackages/cp022263.exe     Online ROM Flash Component for Windows - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials cp022268.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp022268.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p796774672/v93661/cp022268.exe file://./hp/swpackages/cp022268.exe     Online ROM Flash Component for Windows - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition cp021717.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp021717.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1085282306/v91117/cp021717.exe file://./hp/swpackages/cp021717.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant ML10 v2 (J10) Servers HP ProLiant ML10 v2 (J10) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Foundation Edition cp025695.exe ServerOptions Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 


    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp025695.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p661700296/v104989/cp025695.exe file://./hp/swpackages/cp025695.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL380 G6 (P62) Servers HP ProLiant DL380 G6 (P62) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025973.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system cpqsetup.exe cp025973.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1881628071/v105999/cp025973.exe file://./hp/swpackages/cp025973.exe     Online ROM Flash Component for Windows - HP ProLiant ML370 G6/DL370 G6 (P63) Servers HP ProLiant ML370 G6/DL370 G6 (P63) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2003 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024010.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp024010.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p743005532/v99853/cp024010.exe file://./hp/swpackages/cp024010.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL360 G6 (P64) Servers HP ProLiant DL360 G6 (P64) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025977.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025977.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p869407296/v106003/cp025977.exe file://./hp/swpackages/cp025977.exe     Online ROM Flash Component for Windows - HP ProLiant DL580 G7 (P65) Servers HP ProLiant DL580 G7 (P65) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp023988.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023988.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1800161009/v99821/cp023988.exe file://./hp/swpackages/cp023988.exe     Online ROM Flash Component for Windows - HP ProLiant DL980 G7 (P66) Servers HP ProLiant DL980 G7 (P66) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials cp024024.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024024.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p719776236/v99897/cp024024.exe file://./hp/swpackages/cp024024.exe     Online ROM Flash Component for Windows - HP ProLiant DL380 G7 (P67) Servers HP ProLiant DL380 G7 (P67) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024012.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024012.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p390003016/v99855/cp024012.exe file://./hp/swpackages/cp024012.exe     Online ROM Flash Component for Windows - HP ProLiant DL360 G7 (P68) Servers HP ProLiant DL360 G7 (P68) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024018.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024018.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1168416607/v99890/cp024018.exe file://./hp/swpackages/cp024018.exe     Online ROM Flash Component for Windows - HP ProLiant SL390s G7 (P69) Servers HP ProLiant SL390s G7 (P69) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024019.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


     

    ]]>         firmware:system cpqsetup.exe cp024019.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p115846284/v99891/cp024019.exe file://./hp/swpackages/cp024019.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024430.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024430.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p56475329/v100899/cp024430.exe file://./hp/swpackages/cp024430.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2012 R2 cp025383.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025383.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p2013718410/v103933/cp025383.exe file://./hp/swpackages/cp025383.exe     changed Online ROM Flash Component for Windows - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows MultiPoint Server 2011 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024484.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024484.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1663034867/v101057/cp024484.exe file://./hp/swpackages/cp024484.exe     changed Online ROM Flash Component for Windows - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows HPC Server 2008 cp025304.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025304.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p982576322/v103706/cp025304.exe file://./hp/swpackages/cp025304.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024453.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024453.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1889347158/v100965/cp024453.exe file://./hp/swpackages/cp024453.exe     changed Online ROM Flash Component for Windows - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials Microsoft Windows HPC Server 2008 cp025365.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025365.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1334965753/v103876/cp025365.exe file://./hp/swpackages/cp025365.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp024371.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

      ]]>         firmware:system cpqsetup.exe cp024371.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p63122925/v100759/cp024371.exe file://./hp/swpackages/cp024371.exe     Online ROM Flash Component for Windows - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp023155.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023155.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p2119570278/v96731/cp023155.exe file://./hp/swpackages/cp023155.exe     changed Online ROM Flash Component for Windows - HP ProLiant DL580 Gen8 (P79) Servers Online ROM Flash Component for Windows - HP ProLiant DL580 Gen8 (P79) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024868.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

    1. Place the Smart Component in a temporary directory.
    2. From the same directory, run the Smart Component by double-clicking it.
    3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4. Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024868.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p834053736/v102127/cp024868.exe file://./hp/swpackages/cp024868.exe     Online ROM Flash Component for Windows - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Foundation Edition cp023159.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023159.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1834284006/v96735/cp023159.exe file://./hp/swpackages/cp023159.exe     changed Online ROM Flash Component for Windows - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows 8 (64-bit) cp025675.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025675.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p256769679/v104897/cp025675.exe file://./hp/swpackages/cp025675.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant (DL120 Gen9) (P86) Servers HP ProLiant (DL120 Gen9) (P86) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp026392.exe Server BIOS - System ROM English (US) 1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026392.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1839559996/v107170/cp026392.exe file://./hp/swpackages/cp026392.exe     Online ROM Flash Component for Windows - HP ProLiant ML10 (P88) Server HP ProLiant ML10 (P88) Server Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 cp023989.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp023989.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p882664079/v99823/cp023989.exe file://./hp/swpackages/cp023989.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp026260.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.
     

    ]]>         firmware:system cpqsetup.exe cp026260.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p309434851/v106778/cp026260.exe file://./hp/swpackages/cp026260.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant ML350 Gen9 (P92) Servers HP ProLiant ML350 Gen9 (P92) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026323.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026323.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p226158376/v107009/cp026323.exe file://./hp/swpackages/cp026323.exe     changed Online ROM Flash Component for Windows - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp025888.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system cpqsetup.exe cp025888.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1877657665/v105688/cp025888.exe file://./hp/swpackages/cp025888.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant ML150 Gen9 (P95) Servers HP ProLiant ML150 Gen9 (P95) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026292.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026292.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p392963499/v106901/cp026292.exe file://./hp/swpackages/cp026292.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant ML110 Gen9 (P99) Servers HP ProLiant ML110 Gen9 (P99) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026296.exe ServerOptions Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026296.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1820280725/v106926/cp026296.exe file://./hp/swpackages/cp026296.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant XL230b Gen9 (U12) Servers HP ProLiant XL230b Gen9 (U12) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp026403.exe ServerOptions Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

    1. Place the Smart Component in a temporary directory.
    2. From the same directory, run the Smart Component by double-clicking it.
    3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4. Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):

    1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2. Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3. Boot from the newly created USB key.
    4. Follow the on-screen directions to complete the firmware update.

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026403.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1313681777/v107191/cp026403.exe file://./hp/swpackages/cp026403.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant XL230a/XL250a Gen9 (U13) Servers HP ProLiant XL230a/XL250a Gen9 (U13) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2008 x64 cp026301.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026301.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1210064085/v106934/cp026301.exe file://./hp/swpackages/cp026301.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Online ROM Flash Component for Windows x64 - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 R2 Foundation Edition cp026116.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 


    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026116.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1066841149/v106372/cp026116.exe file://./hp/swpackages/cp026116.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 R2 Foundation Edition cp026405.exe Server BIOS - System ROM English (US) 1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026405.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p938428766/v107198/cp026405.exe file://./hp/swpackages/cp026405.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant XL730f/XL740f/XL750f Gen9 (U18) Servers HP ProLiant XL730f/XL740f/XL750f Gen9 (U18) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp026229.exe ServerOptions Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026229.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1993832380/v106703/cp026229.exe file://./hp/swpackages/cp026229.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp026320.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026320.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p1121374143/v107003/cp026320.exe file://./hp/swpackages/cp026320.exe     Online ROM Flash Component for Windows - HP ProLiant DL320 G6/ML330 G6 (W07) Servers HP ProLiant DL320 G6/ML330 G6 (W07) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024020.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024020.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p430138566/v99893/cp024020.exe file://./hp/swpackages/cp024020.exe     Online ROM Flash Component for Windows - HP 512MB Flash Backed Write Cache for B-Series Smart Array HP 512MB Flash Backed Write Cache for B-Series Smart Array Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023317.exe Storage Server Firmware - Storage Controller English (US) To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - HP 512MB Flash Backed Write Cache for B-Series Smart Array

    Release Version and/or Date:
         0.50

    Last Recommended or Critical Version:
         0.44

    Previous Version of Firmware:
         0.44

    Firmware Dependency:
         None

    Enhancements/New Features:
             None

    Problems Fixed in version 0.50:
    • In some cases, when the power was applied to the system, the Smart Array controller would report that the supercap was charging even though charging had completed. The supercap charging message would display in the following locations:
      • POST
      • HP Smart Storage Administrator (HP SSA)
    Known Issues:
         None]]>         firmware:QLOGIC cpqsetup.exe cp023317.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1065734752/v97189/cp023317.exe file://./hp/swpackages/cp023317.exe     Online ROM Flash for Windows - Power Management Controller (HP ProLiant Gen8 Servers) Online ROM Flash - Power Management Controller (HP ProLiant Gen8 Servers) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp021612.exe Server Firmware - Power Management English (US), Japanese  The "HP ProLiant iLO 3/4 Channel Interface Driver for Windows" must be installed and running before using this flash component. If the driver is not running you will receive the following error message:
    "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."
     

    ]]>         Installation Note: (For Windows components)

    To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the desired firmware to be updated in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow directions to complete firmware update.

    ]]>         firmware:QLOGIC cpqsetup.exe cp021612.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p1397900110/v90819/cp021612.exe file://./hp/swpackages/cp021612.exe     Online ROM Flash for Windows - Power Management Controller (HP ProLiant DL580 Gen8 Servers) Online ROM Flash - Power Management Controller (HP ProLiant DL580 Gen8 Servers) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 cp022555.exe Server Firmware - Power Management English (US), Japanese  The "HP ProLiant iLO 3/4 Channel Interface Driver for Windows" must be installed and running before using this flash component. If the driver is not running you will receive the following error message:
    "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."
     

    ]]>         Installation Note: (For Windows components)

    To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2. Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3. Boot from the newly created USB key.
    4. Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:QLOGIC cpqsetup.exe cp022555.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p25120162/v94662/cp022555.exe file://./hp/swpackages/cp022555.exe     new Online ROM Flash for Windows x64 - Advanced Power Capping Microcontroller Firmware for HP ProLiant BL/DL/MLGen9 Servers Online ROM Flash - Advanced Power Capping Microcontroller Firmware for HP ProLiant Gen9 Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 cp025309.exe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."
    ]]>         To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:sd:powerpic cpqsetup.exe cp025309.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw/p1302163688/v103718/cp025309.exe file://./hp/swpackages/cp025309.exe     Online ROM Flash Component for Windows - HP ProLiant BL465c G1/BL465c G5/BL465c G6 (A13) Servers HP ProLiant BL465c G1/BL465c G5/BL465c G6 (A13) Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 cp023991.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023991.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p424647361/v99827/cp023991.exe file://./hp/swpackages/cp023991.exe     Online ROM Flash Component for Windows - HP ProLiant BL465c G7 (A19) Servers HP ProLiant BL465c G7 (A19) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows MultiPoint Server 2011 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp023998.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


    ]]>         firmware:system cpqsetup.exe cp023998.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1332336209/v99837/cp023998.exe file://./hp/swpackages/cp023998.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL685c G7 (A20) Servers HP ProLiant BL685c G7 (A20) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024551.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp024551.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1612802426/v101224/cp024551.exe file://./hp/swpackages/cp024551.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp025529.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system cpqsetup.exe cp025529.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1604950366/v104431/cp025529.exe file://./hp/swpackages/cp025529.exe     new Online ROM Flash Component for Windows - HP ProLiant BL480c (I14) Server HP ProLiant BL480c (I14) Server Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows 2000 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp023993.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp023993.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1847032525/v99831/cp023993.exe file://./hp/swpackages/cp023993.exe     Online ROM Flash Component for Windows - HP ProLiant BL490c G6 (I21) Servers HP ProLiant BL490c G6 (I21) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024003.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp024003.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1374886613/v99845/cp024003.exe file://./hp/swpackages/cp024003.exe     Online ROM Flash Component for Windows - HP ProLiant BL280c G6 (I22) Servers HP ProLiant BL280c G6 (I22) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024004.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024004.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p849364601/v99846/cp024004.exe file://./hp/swpackages/cp024004.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL460c G6/WS460c G6 (I24) Servers HP ProLiant BL460c G6/WS460c G6 (I24) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows XP Professional Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows Vista (64-bit) Microsoft Windows XP Professional x64 Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows 7 (32-bit) - All Editions Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows 7 Professional (32-bit) Microsoft Windows 7 Enterprise (32-bit) Microsoft Windows Vista Business (32-bit) Microsoft Windows Vista Enterprise (32-bit) Microsoft Windows 7 Professional (64-bit) Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials cp025980.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system cpqsetup.exe cp025980.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p149705611/v106006/cp025980.exe file://./hp/swpackages/cp025980.exe     Online ROM Flash Component for Windows - HP ProLiant BL680c G7/BL620c G7 (I25) Servers HP ProLiant BL680c G7/BL620c G7 (I25) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2012 R2 cp024021.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024021.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p818323401/v99894/cp024021.exe file://./hp/swpackages/cp024021.exe     Online ROM Flash Component for Windows - HP ProLiant BL2x220c G6 (I26) Servers HP ProLiant BL2x220c G6 (I26) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024005.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system cpqsetup.exe cp024005.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1437891353/v99848/cp024005.exe file://./hp/swpackages/cp024005.exe     Online ROM Flash Component for Windows - HP ProLiant BL460c G7 (I27) Servers HP ProLiant BL460c G7 (I27) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024006.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024006.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1948128387/v99849/cp024006.exe file://./hp/swpackages/cp024006.exe     Online ROM Flash Component for Windows - HP ProLiant BL490c G7 (I28) Servers HP ProLiant BL490c G7 (I28) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024007.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024007.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p2023005104/v99850/cp024007.exe file://./hp/swpackages/cp024007.exe     Online ROM Flash Component for Windows - HP ProLiant BL2x220c G7 (I29) Servers HP ProLiant BL2x220c G7 (I29) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024008.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:system cpqsetup.exe cp024008.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1521441885/v99851/cp024008.exe file://./hp/swpackages/cp024008.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp025454.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025454.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1362107804/v104174/cp025454.exe file://./hp/swpackages/cp025454.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials cp025361.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025361.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p697976094/v103872/cp025361.exe file://./hp/swpackages/cp025361.exe     changed Online ROM Flash Component for Windows - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp025423.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system cpqsetup.exe cp025423.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-sys/p1180789872/v104031/cp025423.exe file://./hp/swpackages/cp025423.exe     new Online ROM Flash Component for Windows x64 - HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp026249.exe Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server: 

    1.     Place the Smart Component in a temporary directory.
    2.     From the same directory, run the Smart Component by double-clicking it.
    3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
    4.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner. 
     

    This component can only be executed on Windows x64.

    ]]>         firmware:system cpqsetup.exe cp026249.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-uefi-sys/p145084115/v106748/cp026249.exe file://./hp/swpackages/cp026249.exe     changed Online HP BladeSystem c-Class Onboard Administrator Firmware Component for Windows Onboard Administrator Firmware Component for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 Itanium Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2003 Microsoft Windows Server 2003 64-Bit Edition (Itanium) Microsoft Windows Storage Server 2003 Microsoft Windows 2000 Microsoft Windows 8 (64-bit) Microsoft Windows 8 (32-bit) Microsoft Windows Vista (64-bit) Microsoft Windows Vista (32-bit) Microsoft Windows XP Professional x64 Edition Microsoft Windows XP Professional Microsoft Windows Server 2008 Foundation Edition Microsoft Windows XP 64-Bit Edition cp024479.exe ServerOptions Server Storage Firmware - Blade Infrastructure English (US), Japanese, Chinese (Simplified) ]]>
  • As a stand alone component that can be used to script the deployment of the Onboard Administrator firmware
  • In conjunction with the HP Smart Update Manager found on the Smart Update Firmware DVD, the component can be used to deploy the firmware to the HP BladeSystem c-Class Onboard Administrator
  • Firmware extracted from the component can be deployed using the web-based user interface for the HP BladeSystem c-Class Onboard Administrator

    • Installation Notes for using the component as a stand alone component

    This smart component is a self-extracting executable. The smart component unpacks itself, flashes the firmware on the HP BladeSystem c-Class Onboard Administrator, and cleans up.

    The general command line syntax for this smart component is


       cpxxxxxx.exe /target <netAddress> /user <username> /passwd <password> [/s[ilent]] [/f[orce]] [/logdir <path>]


    where cpxxxxxx.exe represents the filename of the component

    NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.

    •  /target <netAddress>           The netAddress parameter is the IP address or DNS name of the OA to target.  This should be the Active OA if two OA’s are in an enclosure.  There is a space between the /target and the netAddress parameter.
    •  /user <username>               The username is the userid to use when attempting to login to the OA.  There is a space between the /user and the username parameter.
    •  /passwd <password>            The password is the password for the userid to login to the OA.  There is a space between the /passwd and the password parameter.
    •  /s[ilent]                                The silent option will silently install the firmware, if needed.
    •  /f[orce]                                The force option will cause the OA Flash utility to either downgrade the existing firmware or reinstall the same version of firmware on the target OA.
    •  /logdir <path>                     This optional parameter is used to redirect the output from the OA flash utility to a different directory than the default location of %SYSTEMDRIVE%\CPQSYSTEM\hp\log\<netAddress>. The redirected location is <path>\hp\log\<netAddress>.

    To flash the firmware:

    •  Download the smart component file to a server which is on the same network as the HP BladeSystem c-Class Onboard Administrator to be updated.
    •  Execute cpxxxxxx.exe /target <netAddress> /user <username> /passwd <password> [/s[ilent]] [/f[orce]] [/logdir <path>]

    The return codes are :

    •  0     Success
    •  1     Reserved
    •  2     Upgrade is not needed because firmware version is current
    •  3     Upgrade is not needed because newer firmware version is present
    •  4     Target not found
    •  5     User terminated session
    •  6     Incorrect parameter
    •  7     General failure

    Installation Notes for using the component with HP Smart Update Manager and the Smart Update Firmware DVD

    1. Obtain the latest version of the Smart Update Firmware DVD.
    2. Place the Smart Update Firmware DVD on a USB key using the HP USB Key Utility.
    3. Place this component in the directory, /compaq/swpackages on the USB key.
    4. Place the USB key in a system which is on the same network as the Onboard Administrator to be updated.
    5. Run Autorun on the Smart Update Firmware DVD from the USB key.
    6. Select the "Firmware Update" tab.
    7. Click the "Install Firmware" link to launch the HP Smart Update Manager.
    8. Follow the GUI to install the firmware on the Onboard Adminstrator.

    Installation Notes for using the firmware extracted from the component

    1. Extract the firmware binary out of the component.
    2. Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Onboard Administrator.
    3. Log in to the Onboard Administrator's web-based user interface as an administrator. Firmware Update is available under the Active Onboard Administrator category. You may select the firmware image by entering a path to the file in the "Local File" field or by clicking on the "Browse" button to locate the firmware image on the local machine, a mapped drive, or a network share.
    4. Click "Upload" to begin the firmware update process.

    The user guide for the Onboard Administrator is located here.
    The user guide for the Onboard Administrator command line interface is located here.

    ]]>         Deliverable Name:

    HP BladeSystem c-Class Onboard Administrator Firmware

    Release Version:

    Version 4.40

    Previous Version of Firmware:

    Version 4.30

    Firmware Dependency

    For firmware compatibility information please see HP Service Pack for ProLiant Information Library, http://www.hp.com/go/spp/documentation.

     Important Notes

    • EFM
    The OA only supports SPP ISO images that are less than 4 GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB,  the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”

    If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process.  At a minimum, the custom ISO must contain the firmware components for HP ProLiant BL servers. (When using HP SUM to create the custom ISO image, select Firmware as the Component Type, and select HP ProLiant BL Series as the Server Type.)  For information about creating a custom ISO image compatible for OA EFM functionality, see the HP BladeSystem Onboard Administrator User Guide. More HP SUM information can be found via HP Smart Update Manager online help or at http://www.hp.com/go/hpsum/documentation. 
    • FIPS
    OA 3.71 has received FIPS 140-2 Certification  (http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401val2014.htm#2174)  
    • IPv6
    When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations.  A manual reset of the iLO releases these addresses immediately.
    • Security
    Support for several cipher suites has been removed due to the generally acknowledged weakness of the associated encryption algorithms. The OA now supports only the cipher suites listed in the following table. To successfully establish a secure connection to the OA via SSL, clients must support one or more of these cipher suites.
    Note specifically that Windows 2003 Active Directory and Internet Explorer might not successfully connect to the OA due to the lack of default support for at least one of the supported cipher suites listed. You can add the necessary support by installing and enabling Advanced Encryption Standard (AES) based cipher suites in Windows 2003. Refer to Microsoft hotfix available at http://support.microsoft.com/kb/948963.  
    SSL/TLS cipher suites Standard names for SSL/TLS cipher suites
    EDH-RSA-DES-CBC3-SHA TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
    DHE-RSA-AES128-SHA TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    DHE-RSA-AES256-SHA TLS_DHE_RSA_WITH_AES_256_CBC_SHA
    AES128-SHA TLS_RSA_WITH_AES_128_CBC_SHA
    AES256-SHA TLS_RSA_WITH_AES_256_CBC_SHA
    ECDHE-RSA-DES-CBC3-SHA TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
    ECDHE-RSA-AES128-SHA TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
    ECDHE-RSA-AES256-SHA TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
    AES128-GCM-SHA256 TLS_RSA_WITH_AES_128_GCM_SHA256
    AES256-GCM-SHA384 TLS_RSA_WITH_AES_256_GCM_SHA384
    ECDHE-RSA-AES128-SHA256 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
    AES128-SHA256 TLS_RSA_WITH_AES_128_CBC_SHA256
    AES256-SHA256 TLS_RSA_WITH_AES_256_CBC_SHA256
     
     
    Enhancements/New Features


    Problems Fixed
    • General
    • Devices with MAC addresses ending with “81:00” (such as f8:66:f2:6d:81:00) were unable to communicate with the OA. Some examples of the observed symptoms were:
    Attempts to ping the OA from the device fail The OA cannot use such a device as a gateway
    The OA GUI and CLI cannot be used from this device   "CERTS: Failed to open flash"
    This had no functional impact; the entry could be ignored. 
    • Documentation
      •  In the September 2014 (Edition 23) HP BladeSystem Onboard Administrator CLI User Guide for OA 4.30, within the description of the SET HTTP REQUESTREADTIMEOUT command, a command showing recommended values had the BODY MINRATE value as 50 instead of the correct value 500. The command with the correct recommended values is as follows:
    SET HTTP REQUESTREADTIMEOUT HEADER 3-8 MINRATE 500 BODY 5-10 MINRATE 500

    This error was corrected in the October 2014 (Edition 24) document. 
    • EFM
      • In rare cases, the Active OA module would reboot expectedly during the update of the OA firmware on redundant OA modules.  When this issue occurred, the Active OA module would reboot during the transfer of the OA firmware image to the Standby OA module.  The OA firmware update would fail to complete successfully; a segmentation fault (SEGV) error would be logged in the Active OA system log.  This issue did not cause any firmware or data corruption, and the OA firmware update could be successful if retried following the occurrence of this issue. Note that this issue could only be encountered when updating OA modules running OA 4.30 firmware.  
      • Attempts to update the firmware failed on an HP ProLiant Gen9 server blade configured in UEFI Boot Mode or UEFI Optimized Boot Mode. When this failure occurred, the firmware log for the blade server would indicate an error similar to the following for each update attempt, including the two automatic retries that occur on failure:
    Jul 15 09:34:19 Unable to detect ISOLINUX booting.
    A final status report similar to the following would also be issued:
    Jul 15 10:30:33 Firmware Management is incomplete on blade <bay number>.  Unable to mount ISO or validate version information. The URL or ISO is invalid.
    •  CLI commands affected include those that depend on the URL specification via the SET FIRMWARE MANAGEMENT URL command (such as the UPDATE FIRMWARE SERVER command and the UPDATE IMAGE FW_ISO command). 
    •  The EFM firmware log would indicate "Firmware Management successfully completed on blade x" even if the iLO firmware update failed to complete successfully.  
    • IPv6
      • Configuration scripts could not be applied to another OA properly when attempting to configure new EBIPA DNS IPv4/IPv6 addresses or IPv6 routes. Attempts to change the configurations could only add new addresses to those of the previous configuration. It was not possible to replace the existing addresses with the new ones.
    The following CLI commands now include the ALL keyword to allow clearing of all unwanted addresses or routes:
    REMOVE EBIPA SERVER DNS ALL
    REMOVE EBIPAV6 SERVER DNS ALL
    REMOVE OA ROUTE IPV6 <ACTIVE|STANDBY> ALL

    A configuration script can now use these commands to clear the previous (unwanted) EBIPA DNS IP addresses and IPv6 static routes, and then add the new ones. 
    • KVM
      • Pressing Enter four times consecutively on a keyboard attached to the c7000 Enclosure integrated KVM module would cause the highlighted blade server on the KVM screen to power off or on, depending on its current power state. This issue has been fixed by interchanging the Ok/Confirm and Cancel buttons on the Confirm: Change Server Power and Change Server Power screens so that the Cancel button is highlighted by default instead of the OK or Confirm button. The default focus is set on the Cancel button. (QXCR1001357592)
    •  Security
      • The following security vulnerabilities were fixed:
      • This release of the OA resolves this security vulnerability by compiling OpenSSl with OPENSSL_NO_SRTP (the OA does not use DTLS and SRTP).
        • CVE-2014-0139: A vulnerability affecting SSL/TLS transactions that might allow a man-in-the-middle attacker to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certificate Authority.
        • CVE-2014-0015: A vulnerability when more than one authentication method is enabled and NTLM connections are reused, which might allow context-dependent attackers to authenticate as other users via a request.
        • CVE-2014-0138: A vulnerability affecting certain LDAP connections that might allow context-dependent attackers to connect as other users via a request (similar to issue CVE-2014-0015).
        • CVE-2014-2522: A vulnerability when running on Windows and using an SChannel/Winssl TLS backend. When accessing a URL that uses a numerical IP address, curl does not verify that the server host name matches a domain name in the subject’s CN or subjectAltName field of the X.509 certificate. This allows man-in-the-middle attackers to spoof servers via an arbitrary valid certificate.
      • In addition, OpenSSL has been updated to version 1.0.1h to address multiple CVE fixes.
    • SSH/SSL keys
      • With OA firmware later than 4.0x, attempts to add an SSH key using the OA CLI ADD SSH KEY command might fail. Intermittently, after issuing the command, the user received an error message ("The submitted file is not a valid SSH key."), in which case the command failed. 
    • SNMP
    • SNMP alerts (or traps) sent from the OA to an IPv6 SNMP alert destination are sent incorrectly to destination port 161 instead of port 162 (per RFC 1157) when no destination port is explicitly specified as part of an IPv6 SNMP alert destination configuration. 
     Known Issues
    • Browsers
      • SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft® Internet Explorer 11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window.
    This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for  Internet Explorer.  To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer’s settings. This issue occurs only on Internet Explorer browsers.    
    • FIPS
    • Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20.  When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON or DEBUG and is configured with a  1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate.  While operating in this degraded FIPS Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access > FIPS tab will fail and show the error message “The selected FIPS mode is already enabled”.  When the non-compliant certificate is removed, the degraded FIPS operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface.  Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA.

    ]]>         firmware:oa oaupgrade.exe hpoa440.bin cp024479.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-bladeinf/p342753574/v101043/cp024479.exe file://./hp/swpackages/cp024479.exe     changed HP BladeSystem c-Class Virtual Connect Firmware, Ethernet plus 4/8Gb 20-port and 8/16Gb 24-port FC Edition Component for Windows BladeSystem c-Class Virtual Connect Firmware, Ethernet plus FC Edition Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 Itanium Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp026096.exe Networking Server Firmware - Blade Infrastructure English (US), Japanese The latest version of HP Virtual Connect Release Notes contains the prerequisites and can also be found in the "User guide" section in the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64180&taskId=135&prodTypeId=3709945&prodSeriesId=4144084

    ]]>         This component and its firmware can be used in the following scenarios:

    1. In conjunction with the HP Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HP BladeSystem c-Class Virtual Connect module.

    2. Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HP BladeSystem c-Class Virtual Connect modules.

    Installation Notes for using the component with HP Smart Update Manager and SPP

    1. Obtain the latest version of HP SPP.
    2. Extract the contents of the SPP ISO, locate the directory, /usb, and run the hpusbkey.exe file.
    3. Place the SPP on a USB key using the HP USB Key Utility
    4. Place this version of the Virtual Connect firmware component in the directory, /hp/swpackages on the USB key.
    5. Place the USB key in a system which is on the same network as the HP BladeSystem c-Class Virtual Connect module to be updated.
    6. Run “launch_hpsum.bat/launch_hpsum.sh” on the SPP from the USB key to launch the HP Smart Update Manager.
    7. Follow the GUI to install the firmware on the Virtual Connect module.

    Installation Notes for using the firmware extracted from the component

    1. Extract the firmware binary out of the component.

    2. Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Virtual Connect module.

    3. Start the Virtual Connect Support Utility and deploy the firmware.

    HP requires using the HP BladeSystem c-Class Virtual Connect Support Utility version 1.11.0 (or higher) to install the HP VC FlexFabric-20/40 F8 version 4.41, HP VC Flex-10/10D version 4.41, HP VC FlexFabric 10Gb/24-port version 4.41, HP VC Flex-10 10Gb version 4.41, HP VC 8Gb 24-Port FC version 3.01, HP VC 16Gb 24-Port FC version 3.01, HP VC 4Gb FC version 2.05, and HP VC 8Gb 20-Port FC version 2.05 firmware. Please read the HP BladeSystem c-Class Virtual Connect Support Utility version 1.11.0 release notes.

    Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.41 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.41 in a Multi-Enclosure setup.

    The HP USB Key Utility is used to copy the SPP onto a portable USB key storage device.  Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only.  If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.

    Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.

    ]]>         The latest version of HP Virtual Connect Release Notes can also be found in the "User guide" section in the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64180&taskId=135&prodTypeId=3709945&prodSeriesId=4144084

    ]]>         firmware:vc8gb firmware:vceth firmware:vc4gb cp026096.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-bladeinf/p1788930928/v106281/cp026096.exe file://./hp/swpackages/cp026096.exe     Online ROM Flash Component for Windows - Smart Array P700m Smart Array P700m Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2003 64-Bit Edition (Itanium) Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 Itanium Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp019156.exe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - Smart Array P700m 

    Release Version and/or Date:
          7.24

    Last Recommended or Critical Version:
          7.24

    Previous Version of Firmware:
          7.22

    Firmware Dependency:

    • Updating the HP DL360G5 System ROM to revision P58 3/9/08 or higher is required in addition to updating to this HP Smart Array firmware revision for the modified shutdown sequence to ensure sufficient time for HDD head parking of internal HDDs.
    • Updating the HP MSA 60 and/or MSA 70 firmware version to 2.16 or higher is required to enable dual domain functionality.

    Enhancements/New Features:
             None

    Problems Fixed:

    • Resolved an issue where the server’s system event log would fill with Event ID 129 warnings and the Smart Array controller would become unresponsive.
    • FW version 7.24(B) - Fixed an issue where a decimal conversion was not being interpreted correctly when installing the component under certain regional settings in Windows. This would cause the component installation to end with a return code 3 (already up to date) and a force install would be required to successfully update the FW.

    Known Issues:
         None

    ]]>         firmware 103C 3230 103C 323D cpqsetup.exe /t "P700m" /c cp019156.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-array/p1424889783/v83337/cp019156.exe file://./hp/swpackages/cp019156.exe     changed Online HP 6Gb SAS BL Switch Firmware Smart Component for Windows (x86/x64) Online HP 6Gb SAS BL Switch Firmware Component for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp025145.exe Storage Server Firmware - Blade Infrastructure English (US) Installation Instructions:

    To update firmware from Windows operating system on target server:

    • Place the Smart Component in a temporary directory. 
    • Double-click on the Smart Component. 
    • Follow the directions given by the Smart Component.

    HP recommends for remote deployment of this package that you obtain the most recent version of the HP Service Pack for ProLiant  (SPP) and follow these steps:

    • Place the SPP on a USB key using the HP USB Key Utility.
    • Place the firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages on the USB key.
    • From the \hp\swpackages directory, double click on hpsum.exe.
    • Follow the GUI instructions to install the firmware on the remote host.
    ]]>         Deliverable Name:
         Online HP 6Gb SAS BL Switch Firmware Smart Component for Windows (x86/x64)

    Release Version and/or Date:
         4.1.1.0

    Last Recommended or Critical Version:
         4.1.1.0

    Previous Version of Firmware:
         4.0.1.0

    Firmware Dependency:

         The devices listed below require minimum FW deliverables with HP Storage Manager version 4.1.1.0:

    Device, Minimum Recommended Version

    • HP D3600/D3700 Disk Enclosure, 1.00
    • HP D2600/D2700 Disk Enclosure, 0147
    • HP 600 Modular Disk System, 3.60
    • HP D6000 Disk Enclosure, 2.38
    • HP P2000 MSA Array System, TS251P003
    • HP Smart Array P711m/P712m Controller, 5.70
    • HP Smart Array P721m Controller, 3.54

    Enhancements/New Features for FW version 4.1.1.0(B):

    • Added component support for x64 operating systems.

    Problems Fixed:
    The following issues are now resolved:

    • If the switch was assigned a static IP address using the Onboard Administrator EBIPA feature, then the switch might generate continuous Cold Start SNMP traps and overfill logs.
    • A storage enclosure flash operation might fail when run from Virtual Storage Manager (VSM) CLI while the GUI was open.
    • Link rate of a disk was incorrectly displayed in VSM GUI and CLI.
    • In rare cases, multiple resets of a switch would cause the Smart Array to lockup 0xAB.

    Known Issues:
         None

    ]]>         firmware:solex6Gb HP6GSASBLSWH cp025145.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-bladeinf/p1287307055/v103100/cp025145.exe file://./hp/swpackages/cp025145.exe     Online HP 3Gb SAS BL Switch Firmware Smart Component for Windows Online HP 3Gb SAS BL Switch Firmware Component for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp023979.exe ServerOptions Server Firmware - Blade Infrastructure English (US) Installation Instructions:

    To update firmware from Windows operating system on target server:

    • Place the Smart Component in a temporary directory. 
    • Double-click on the Smart Component. 
    • Follow the directions given by the Smart Component.

    HP recommends for remote deployment of this package that you obtain the most recent version of the HP Service Pack for ProLiant  (SPP) and follow these steps:

    • Place the SPP on a USB key using the HP USB Key Utility.
    • Place the firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages on the USB key.
    • From the \hp\swpackages directory, double click on hpsum.exe.
    • Follow the GUI instructions to install the firmware on the remote host.

    PLEASE NOTE:

    • To update the firmware on remote hosts, do not boot from the SPP USB key.
    • To update firmware on remote hosts, such as Onboard Administrators, blade iLOs, SAS switches, etc., refer to the HP Smart Update Manager help documentation available by clicking on the help button and the HP Smart Update Manager User's Guide.   Many features are available for advanced use.   For example, remote host configurations can be stored and retrieved, saving a great deal of time for future firmware updates.
    ]]>         Deliverable Name:
         Online HP 3Gb SAS BL Switch Firmware Smart Component for Windows

    Release Version and/or Date:
          2.2.17.0

    Last Recommended or Critical Version:
          2.2.15.0

    Previous Version of Firmware:
          2.2.15.0

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The HP 3Gb SAS Switch will now publish external IP addresses to Onboard Administrator versions 3.20 or later instead of the internal IP address.
    • Component packaging has been updated; no impact to product’s functionality.

    Problems Fixed:
         None

    Known Issues:
             None

    ]]>         firmware:solex cp023979.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-bladeinf/p1422847423/v99787/cp023979.exe file://./hp/swpackages/cp023979.exe     Combined Chipset Identifier for Windows Server 2008 Combined Chipset Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 Microsoft Windows Vista (32-bit) cp018410.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\CCI %SystemDrive%\CPQSYSTEM\PNPDRVS %SystemDrive%\CPQSYSTEM\PNPDRVS 1022 7459 1022 7459 1002 5A23 1002 5A23 1002 4385 103C 1775 1002 4385 103C 1772 8086 342E 103C 330B 8086 3422 103C 330B 8086 3423 103C 330B 8086 342E 003C 000B 8086 3422 003C 000B 8086 3423 003C 000B 8086 3C60 103C 18A8 8086 3C20 103C 18A8 8086 3C21 103C 18A8 8086 3C22 103C 18A8 8086 3C23 103C 18A8 8086 3C24 103C 18A8 8086 3C25 103C 18A8 8086 3C26 103C 18A8 8086 3C27 103C 18A8 8086 3C28 103C 18A8 8086 3C2A 103C 18A8 8086 3C2C 103C 18A8 8086 3C40 103C 18A8 1002 5A23 103C 1762 8086 0E20 103C 18A8 8086 0E21 103C 18A8 8086 0E22 103C 18A8 8086 0E23 103C 18A8 8086 0E24 103C 18A8 8086 0E25 103C 18A8 8086 0E26 103C 18A8 8086 0E27 103C 18A8 8086 0E28 103C 18A8 8086 0E2A 103C 18A8 8086 0E2C 103C 18A8 cpqsetup.exe cp018410.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p950399792/v81008/cp018410.exe file://./hp/swpackages/cp018410.exe Combined Chipset Identifier for Windows Server 2008 x64 Edition Combined Chipset Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 Small Business Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Vista (64-bit) cp018409.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\CCI %SystemDrive%\CPQSYSTEM\PNPDRVS %SystemDrive%\CPQSYSTEM\PNPDRVS 1022 7459 1022 7459 8086 342E 003C 000B 8086 3422 003C 000B 8086 3423 003C 000B 8086 342E 103C 330B 8086 3422 103C 330B 8086 3423 103C 330B 1002 5A23 1002 5A23 1002 4385 103C 1772 1002 4385 103C 1775 8086 3C60 103C 18A8 8086 3C20 103C 18A8 8086 3C21 103C 18A8 8086 3C22 103C 18A8 8086 3C23 103C 18A8 8086 3C24 103C 18A8 8086 3C25 103C 18A8 8086 3C26 103C 18A8 8086 3C27 103C 18A8 8086 3C28 103C 18A8 8086 3C2A 103C 18A8 8086 3C2C 103C 18A8 8086 3C40 103C 18A8 1002 5A23 103C 1762 8086 0E20 103C 18A8 8086 0E21 103C 18A8 8086 0E22 103C 18A8 8086 0E23 103C 18A8 8086 0E24 103C 18A8 8086 0E25 103C 18A8 8086 0E26 103C 18A8 8086 0E27 103C 18A8 8086 0E28 103C 18A8 8086 0E2A 103C 18A8 8086 0E2C 103C 18A8 cpqsetup.exe cp018409.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1375611694/v81007/cp018409.exe file://./hp/swpackages/cp018409.exe Combined Chipset Identifier for Windows Server 2008 R2 Combined Chipset Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp018411.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\CCI 8086 3C60 103C 18A8 8086 3C20 103C 18A8 8086 3C21 103C 18A8 8086 3C22 103C 18A8 8086 3C23 103C 18A8 8086 3C24 103C 18A8 8086 3C25 103C 18A8 8086 3C26 103C 18A8 8086 3C27 103C 18A8 8086 3C28 103C 18A8 8086 3C2A 103C 18A8 8086 3C2C 103C 18A8 8086 3C40 103C 18A8 8086 0E20 103C 18A8 8086 0E21 103C 18A8 8086 0E22 103C 18A8 8086 0E23 103C 18A8 8086 0E24 103C 18A8 8086 0E25 103C 18A8 8086 0E26 103C 18A8 8086 0E27 103C 18A8 8086 0E28 103C 18A8 8086 0E2A 103C 18A8 8086 0E2C 103C 18A8 cpqsetup.exe cp018411.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1555855002/v81010/cp018411.exe file://./hp/swpackages/cp018411.exe changed Combined Chipset Identifier for Windows Server 2012 Combined Chipset Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 cp024839.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\CCI 8086 0E20 103C 18A8 8086 0E21 103C 18A8 8086 0E22 103C 18A8 8086 0E23 103C 18A8 8086 0E24 103C 18A8 8086 0E25 103C 18A8 8086 0E26 103C 18A8 8086 0E27 103C 18A8 8086 0E28 103C 18A8 8086 0E2A 103C 18A8 8086 0E2C 103C 18A8 cpqsetup.exe cp024839.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p296142672/v102021/cp024839.exe file://./hp/swpackages/cp024839.exe changed HP ProLiant DL580 Gen8 Supplemental Chipset Identifier for Windows HP ProLiant DL580 Gen8 Supplemental Chipset Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 cp024062.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\HPGEN8EX 8086 0E80 103C 18A8 8086 0E80 8086 0000 cpqsetup.exe cp024062.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1923312917/v100018/cp024062.exe file://./hp/swpackages/cp024062.exe changed HP ProLiant Gen9 Chipset Identifier for Windows HP ProLiant Gen9 Chipset Identifier for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp024063.exe Server Driver - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\HPGEN9 8086 2F20 8086 0000 8086 2F20 103C 21EA 8086 2F20 103C 18A8 cpqsetup.exe cp024063.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1481246798/v100020/cp024063.exe file://./hp/swpackages/cp024063.exe changed Headless Server Registry Update for Windows Headless Server Registry Update Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Storage Server 2008 Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows 7 (32-bit) - All Editions Microsoft Windows Vista (64-bit) Microsoft Windows Vista (32-bit) Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows 8 (64-bit) cp024840.exe Server Software - Lights-Out Management English (US) Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %ProgramFiles%\Hewlett-Packard\Headless Server Registry Update %ProgramFiles(x86)%\Hewlett-Packard\Headless Server Registry Update cpqsetup.exe cp024840.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p579699876/v102022/cp024840.exe file://./hp/swpackages/cp024840.exe     changed PFA Server Registry Update for Windows PFA Server Registry Update Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials cp022305.exe Server Software - Lights-Out Management English (US) Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %ProgramFiles%\Hewlett-Packard\PFA Server Registry Update %ProgramFiles(x86)%\Hewlett-Packard\PFA Server Registry Update cpqsetup.exe cp022305.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1386729090/v93812/cp022305.exe file://./hp/swpackages/cp022305.exe     new HP ProLiant Integrated Management Log Viewer for Windows Server x86 Editions HP ProLiant Integrated Management Log Viewer Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024936.exe Server Software - System Management English (US), Japanese The downloaded file is a self-extracting executable with a filename based on the Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %ProgramFiles%\compaq\Cpqimlv %ProgramFiles(x86)%\compaq\Cpqimlv 103C 3306 103C 3381 103c 3306 103c 3309 103c 3306 103c 330e 0E11 B203 103C 3305 cpqsetup.exe cp024936.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1195070705/v102365/cp024936.exe file://./hp/swpackages/cp024936.exe     changed HP ProLiant Integrated Management Log Viewer for Windows Server x64 Editions HP ProLiant Integrated Management Log Viewer Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024937.exe Server Software - System Management English (US), Japanese The downloaded file is a self-extracting executable with a filename based on the Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %ProgramFiles%\compaq\Cpqimlv 103C 3306 103C 3381 103c 3306 103c 3309 103c 3306 103c 330e 0E11 B203 103C 3305 cpqsetup.exe cp024937.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1143847049/v102366/cp024937.exe file://./hp/swpackages/cp024937.exe     changed HP Insight Management WBEM Providers for Windows Server HP Insight Management WBEM Providers for Windows Server Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024013.exe Server Software - System Management English (US), Japanese, German, French, Italian, Spanish The HP Insight Management WBEM Providers version 10.10.0.0 require storage, network, system management controller, and Lights-Out interface drivers from HP Service Pack for ProLiant  2015.03.0.

    In addition, the System Management Homepage (SMH) component is required for a single server web-based user interface.

     

    ]]>         Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the installation.

     

    ]]>         %ProgramFiles%\hpwbem cpqsetup.exe /optional cp024013.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2081805195/v99873/cp024013.exe file://./hp/swpackages/cp024013.exe     changed HP Insight Management WBEM Providers for Windows Server x64 Editions HP Insight Management WBEM Providers for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023871.exe Server Software - System Management English (US), Japanese, German, French, Italian, Spanish The HP Insight Management WBEM Providers version 10.10.0.0 require storage, network, system management controller, and Lights-Out interface drivers from HP Service Pack for ProLiant 2015.03.0.

    In addition, the System Management Homepage (SMH) component is required for a single server web-based user interface.

     

    ]]>         Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the installation.

     

    ]]>         %ProgramFiles%\hpwbem cpqsetup.exe /optional /verbose_log cp023871.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2068416648/v99407/cp023871.exe file://./hp/swpackages/cp023871.exe     changed HP ProLiant Agentless Management Service for Windows X86 HP ProLiant Agentless Management Service Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp025700.exe Lights Out Server Software - System Management English (US), Japanese The HP ProLiant iLO 3/4 Channel Interface Driver for Windows X86 (version 3.4.0.0 or later) must be installed prior to this component.

    ]]>         1.    Download the Smart Component (cp025700.exe) file to a local directory on the server where you want to install the software.
    2.    Change to the directory.
    3.    Run the .exe file by double-clicking it. A dialog box will display.
    4.    Click the ‘Install’ button to install the software.
    This Smart Component is also included in an HP Service Pack for ProLiant (HP SPP) and supported for deployment by HP Smart Update Manager (HP SUM). See the HP SPP web page for more information: http://hp.com/go/spp.
    ]]>         %ProgramFiles%\Hewlett-Packard\AMS\service 103C 3307 103C 3381 cpqsetup.exe /verbose_log cp025700.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1233073927/v104998/cp025700.exe file://./hp/swpackages/cp025700.exe     changed HP ProLiant Agentless Management Service for Windows X64 HP ProLiant Agentless Management Service Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp025701.exe Lights Out Server Software - System Management English (US), Japanese The HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 (version 3.4.0.0 or later) must be installed prior to this component.

    ]]>         1.    Download the Smart Component (cp025701.exe) file to a local directory on the server where you want to install the software.
    2.    Change to the directory.
    3.    Run the .exe file by double-clicking it. A dialog box will display.
    4.    Click the ‘Install’ button to install the software.
    This Smart Component is also included in an HP Service Pack for ProLiant (HP SPP) and supported for deployment by HP Smart Update Manager (HP SUM). See the HP SPP web page for more information: http://hp.com/go/spp.
    ]]>         %ProgramFiles%\Hewlett-Packard\AMS\service 103C 3307 103C 3381 cpqsetup.exe /verbose_log cp025701.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1938204899/v105000/cp025701.exe file://./hp/swpackages/cp025701.exe     changed Intel C220 Series Platform Controller Hub NMI Fix for Windows Server 2008 R2 Intel C220 Series Platform Controller Hub NMI Fix Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition cp020281.exe Server Software - System Management English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\c220nmi 8086 8c02 103c 330d 8086 8c03 103c 330d cpqsetup.exe cp020281.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p293859770/v87055/cp020281.exe file://./hp/swpackages/cp020281.exe USB Host Controller Identifier for Windows Server 2008 USB Host Controller Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp019655.exe Server Driver - USB English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\nullusb 1912 0014 103C 1996 1912 0015 103C 1996 cpqsetup.exe cp019655.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1137510028/v85113/cp019655.exe file://./hp/swpackages/cp019655.exe USB Host Controller Identifier for Windows Server 2008 x64 Edition USB Host Controller Identifier Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 cp019656.exe Server Driver - USB English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %ProgramFiles%\Hewlett-Packard\nullusb 1912 0014 103C 1996 1912 0015 103C 1996 cpqsetup.exe cp019656.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1469240644/v85114/cp019656.exe file://./hp/swpackages/cp019656.exe changed Intel USB 3.0 Drivers for Windows Server 2008 R2 Intel USB 3.0 Drivers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 cp025969.exe Server Driver - USB English (US) Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 8C31 103C 330D 8086 8D31 103C 21EB 8086 8D31 103C 8030 cpqsetup.exe cp025969.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p853194931/v105984/cp025969.exe file://./hp/swpackages/cp025969.exe     Renesas Electronics USB 3.0 Drivers for Windows Server 2008 R2 Renesas Electronics USB 3.0 Drivers Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 cp019317.exe Server Driver - USB English (US) Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 1912 0014 103C 1996 cpqsetup.exe cp019317.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p643389255/v83920/cp019317.exe file://./hp/swpackages/cp019317.exe     new HP Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver HP Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024666.exe ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese

    From that drive and directory, execute the downloaded file.


    Click the "Install" button to proceed with the installation.

    ]]>         %SystemDrive%\StorageWorks\Version 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 1719 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF F100 103C 2238 cpqsetup.exe cp024666.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1174287987/v101505/cp024666.exe file://./hp/swpackages/cp024666.exe     new HP Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver HP Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024667.exe ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese

    From that drive and directory, execute the downloaded file.


    Click the "Install" button to proceed with the installation.

    ]]>         %systemdrive%\StorageWorks\Version 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 1719 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF F100 103C 2238 cpqsetup.exe cp024667.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1151179773/v101506/cp024667.exe file://./hp/swpackages/cp024667.exe     changed HP Storage Fibre Channel Over Ethernet Adapter Kit for the x86 Emulex Storport Driver HP Storage Fibre Channel Adapter Over Ethernet Kit for the x86 Emulex Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024669.exe Networking Driver - Storage Fibre Channel English (US), Japanese

    From that drive and directory, execute the downloaded file.


    Click the "Install" button to proceed with the installation.

    ]]>         %SystemDrive%\StorageWorks\Version 19A2 0704 103C 174B 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 3315 19A2 0714 103C 3345 19A2 0714 103C 3344 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B cpqsetup.exe cp024669.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1880119585/v101510/cp024669.exe file://./hp/swpackages/cp024669.exe     changed HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 Emulex Storport Driver HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 Emulex Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024668.exe Networking Driver - Storage Fibre Channel English (US), Japanese

    From that drive and directory, execute the downloaded file.


    Click the "Install" button to proceed with the installation.

    ]]>         %systemdrive%\StorageWorks\Version 19A2 0704 103C 174B 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 3315 19A2 0714 103C 3345 19A2 0714 103C 3344 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 cpqsetup.exe cp024668.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1432180210/v101508/cp024668.exe file://./hp/swpackages/cp024668.exe     new HP Storage Fibre Channel Adapter Kit for the x86 QLogic Storport Driver HP Storage Fibre Channel Adapter Kit for the x86 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024461.exe ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese  

     ]]>
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>         %SystemDrive%\StorageWorks\Version 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 cpqsetup.exe cp024461.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p251841598/v100992/cp024461.exe file://./hp/swpackages/cp024461.exe     new HP Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver HP Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Storage Server 2008 R2 cp024462.exe ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese  

     ]]>
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>         %SystemDrive%\StorageWorks\Version 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 cpqsetup.exe cp024462.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1221407686/v100993/cp024462.exe file://./hp/swpackages/cp024462.exe     changed HP Storage Fibre Channel Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 HP Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024463.exe ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>         %SystemDrive%\StorageWorks\Version 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 cpqsetup.exe cp024463.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p575255682/v100994/cp024463.exe file://./hp/swpackages/cp024463.exe     changed HP Storage Fibre Channel Over Ethernet Adapter Kit for the x86 QLogic Storport Driver HP Storage Fibre Channel Over Ethernet Adapter Kit for the x86 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Storage Server 2008 Microsoft Windows Server 2008 W32 cp024630.exe Networking Driver - Storage Fibre Channel English (US), Japanese
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.



    If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.

    ]]>         %SystemDrive%\StorageWorks\Version 1077 8021 103c 3348 1077 8021 103C 1957 cpqsetup.exe cp024630.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1440179654/v101408/cp024630.exe file://./hp/swpackages/cp024630.exe     changed HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Storage Server 2008 R2 cp024631.exe Networking Driver - Storage Fibre Channel English (US), Japanese
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.


    If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.
     

    ]]>         %SystemDrive%\StorageWorks\Version 1077 8021 103c 3348 1077 8021 103C 1957 cpqsetup.exe cp024631.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p882880626/v101409/cp024631.exe file://./hp/swpackages/cp024631.exe     changed HP Storage Fibre Channel Over Ethernet Adapter Kit for the QLogic Storport Driver for Windows Server 2012 and 2012 R2 HP Storage Fibre Channel Over Ethernet Adapter Kit for the x64 QLogic Storport Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024632.exe Networking Driver - Storage Fibre Channel English (US), Japanese
    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

     

    If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.

     

    ]]>         %SystemDrive%\StorageWorks\Version 1077 8021 103c 3348 1077 8021 103C 1957 cpqsetup.exe cp024632.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1950179542/v101410/cp024632.exe file://./hp/swpackages/cp024632.exe     changed HP Storage x64 QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2008 R2 HP Storage x64 QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Storage Server 2008 R2 cp025314.exe ServerOptions Networking Driver - Storage Fibre Channel English (US) Download the Smart Component to a directory on your hard drive and change to that directory.

    The downloaded file is a self-extracting executable with a filename based on the Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %SYSTEMDRIVE%\Storageworks\Version 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 cpqsetup.exe cp025314.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1313907236/v103727/cp025314.exe file://./hp/swpackages/cp025314.exe     changed HP Storage QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2012 HP Storage QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025313.exe ServerOptions Networking Driver - Storage Fibre Channel English (US), Japanese Download the Smart Component to a directory on your hard drive and change to that directory.

    The downloaded file is a self-extracting executable with a filename based on the Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %SYSTEMDRIVE%\Storageworks\Version 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 cpqsetup.exe cp025313.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1190756967/v103726/cp025313.exe file://./hp/swpackages/cp025313.exe     changed HP Storage QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2012 R2 HP Storage QLogic BR-series Storport Fibre Channel Host Bus Adapter Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp025052.exe ServerOptions Networking Driver - Storage Fibre Channel English (US), Japanese Download the Smart Component to a directory on your hard drive and change to that directory.

    The downloaded file is a self-extracting executable with a filename based on the Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %SYSTEMDRIVE%\Storageworks\Version 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 cpqsetup.exe cp025052.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p184362217/v102733/cp025052.exe file://./hp/swpackages/cp025052.exe     HP ProLiant iLO 2 Management Controller Driver for Windows Server 2008 HP ProLiant iLO 2 Management Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows Storage Server 2008 cp024612.exe Server Driver - System Management English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.]]> %systemroot%\system32\drivers 0E11 B203 103C 3305 103C 3302 103C 3305 cpqsetup.exe cp024612.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1495491778/v101343/cp024612.exe file://./hp/swpackages/cp024612.exe HP ProLiant iLO 2 Management Controller Driver for Windows Server 2008 x64 Editions HP ProLiant iLO 2 Management Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Vista (64-bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition cp024613.exe Server Storage Driver - System Management English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.]]> %systemroot%\system32\drivers 0E11 B203 103C 3305 103C 3302 103C 3305 cpqsetup.exe cp024613.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p11024512/v101344/cp024613.exe file://./hp/swpackages/cp024613.exe HP ProLiant iLO 2 Management Controller Driver for Windows Server 2012 HP ProLiant iLO 2 Management Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp021022.exe Server Driver - System Management English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.]]> %systemroot%\system32\drivers 0E11 B203 103C 3305 103C 3302 103C 3305 cpqsetup.exe cp021022.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p358171490/v89302/cp021022.exe file://./hp/swpackages/cp021022.exe changed HP ProLiant iLO 3/4 Channel Interface Driver for Windows X86 HP ProLiant iLO 3/4 Channel Interface Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 Small Business cp024844.exe Lights Out Server Driver - System Management English (US), Japanese Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %systemroot%\system32\drivers 103c 3307 103c 3309 103c 3307 103c 330e 103C 3307 103C 3381 103C 3307 103C 1979 cpqsetup.exe cp024844.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1741131556/v102035/cp024844.exe file://./hp/swpackages/cp024844.exe changed HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 HP ProLiant iLO 3/4 Channel Interface Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Storage Server 2008 R2 Microsoft Windows Server 2012 R2 cp024845.exe Lights Out Server Driver - System Management English (US), Japanese Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %systemroot%\system32\drivers 103c 3307 103c 3309 103c 3307 103c 330e 103C 3307 103C 3381 103C 3307 103C 1979 cpqsetup.exe cp024845.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1398020247/v102036/cp024845.exe file://./hp/swpackages/cp024845.exe changed HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008 X86 HP ProLiant iLO 3/4 Management Controller Driver Package Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp023763.exe Lights Out Server Driver - System Management English (US), Japanese The HP ProLiant iLO 3/4 Channel Interface Driver for Windows X86 (version 3.4.0.0 or later) must be installed prior to this component. The Channel Interface Driver was previously included within this component, but is now installed separately.

    ]]>     Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %ProgramFiles%\Hewlett-Packard\iLO 3\service 103c 3306 103c 3309 103c 3302 103c 3309 103c 3302 103c 330e 103c 3306 103c 330e 103C 3306 103C 3381 103C 3302 103C 3381 103C 3306 103C 1979 cpqsetup.exe cp023763.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p468919737/v98893/cp023763.exe file://./hp/swpackages/cp023763.exe changed HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X64 HP ProLiant iLO 3/4 Management Controller Driver Package Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023764.exe Lights Out Server Driver - System Management English (US), Japanese The HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 (version 3.4.0.0 or later) must be installed prior to this component. The Channel Interface Driver was previously included within this component, but is now installed separately.

    ]]> Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %ProgramFiles%\Hewlett-Packard\iLO 3\service 103c 3306 103c 3309 103c 3302 103c 3309 103c 3302 103c 330e 103c 3306 103c 330e 103C 3306 103C 3381 103C 3302 103C 3381 103C 3306 103C 1979 cpqsetup.exe cp023764.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2122273788/v98894/cp023764.exe file://./hp/swpackages/cp023764.exe HP ProLiant PCI-express Power Management Update for Windows PCI-express Power Management Update Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows XP Professional Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Storage Server 2008 Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Storage Server 2003 Microsoft Windows Vista (64-bit) Microsoft Windows Vista (32-bit) Microsoft Windows XP Professional x64 Edition cp010920.exe Server Driver - Chipset English (US) Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         %ProgramFiles%\Hewlett-Packard\CK-804 chipset - PLX bridge %ProgramFiles(x86)%\Hewlett-Packard\CK-804 chipset - PLX bridge cpqsetup.exe cp010920.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p946064661/v53766/cp010920.exe file://./hp/swpackages/cp010920.exe     new HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008 HP ProLiant Integrated Lights-Out Management Interface Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows XP Professional Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows Storage Server 2008 cp024608.exe Lights Out Server Driver - Lights-Out Management English (US), Japanese Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %systemroot%\system32\drivers 0E11 B204 0E11 B206 0E11 B204 103C 3304 0E11 B204 103C 3305 cpqsetup.exe cp024608.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2088541180/v101339/cp024608.exe file://./hp/swpackages/cp024608.exe new HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008 x64 Editions HP ProLiant Integrated Lights-Out Management Interface Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2003 x64 Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Vista (64-bit) Microsoft Windows XP Professional x64 Edition cp024609.exe Lights Out Server Driver - Lights-Out Management English (US), Japanese Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %systemroot%\system32\drivers 0E11 B204 0E11 B206 0E11 B204 103C 3304 0E11 B204 103C 3305 cpqsetup.exe cp024609.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1151179774/v101340/cp024609.exe file://./hp/swpackages/cp024609.exe HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2012 HP ProLiant Integrated Lights-Out Management Interface Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp020895.exe Lights Out Server Driver - Lights-Out Management English (US), Japanese Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.]]> %systemroot%\system32\drivers 0E11 B204 0E11 B206 0E11 B204 103C 3304 0E11 B204 103C 3305 cpqsetup.exe cp020895.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2139159110/v88917/cp020895.exe file://./hp/swpackages/cp020895.exe new HP Lights-Out Online Configuration Utility for Windows Server 2003/2008 HP Lights-Out Online Configuration Utility for Windows Server 2003/2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2008 W32 Microsoft Windows Storage Server 2008 cp024736.exe Lights Out Server Software - Lights-Out Management English (US), Japanese This utility requires the following minimum firmware revisions:

    • Integrated Lights-Out 2 firmware v1.00 or later
    • Integrated Lights-Out 3 firmware v1.00 or later
    • Integrated Lights-Out 4 firmware v1.00 or later

    The management interface driver must be installed on the server.

    Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.

    ]]>

    Click on the install button to install the utlility on the server. This does not require a reboot.

    The utility will be installed in the program files under the directory Hp\Hponcfg\

    A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HP System Tools > HP Lights-Out Online Configuration Utility".

    ]]>         %ProgramFiles%\Hp\hponcfg 0E11 B204 0E11 B206 0E11 B204 103C 3304 0E11 B204 103C 3305 0E11 B203 103C 3304 0E11 B203 103C 3305 103C 3302 103C 3305 0E11 A0ED 103C 3305 0E11 B205 103C 3305 103c 3301 103C 3305 0E11 A0ED 103C 3304 103c 3300 103C 3304 103c 3302 103c 3304 103c 3300 103C 3305 0E11 B205 103C 3304 103c 3301 103C 3304 103c 3307 103c 3309 103c 3306 103c 3309 103c 3302 103c 3309 103c 3300 103c 3309 103c 3308 103c 3309 103c 3301 103c 3309 103c 3300 103c 330e 103c 3301 103c 330e 103c 3302 103c 330e 103c 3306 103c 330e 103c 3307 103c 330e 103c 3308 103c 330e 103C 3306 103C 3381 103C 3307 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 cpqsetup.exe cp024736.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1980988109/v101746/cp024736.exe file://./hp/swpackages/cp024736.exe     new HP Lights-Out Online Configuration Utility for Windows 2003/2008/2012 x64 Editions HP Lights-Out Online Configuration Utility for Windows 2003/2008/2012 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024737.exe Lights Out Server Software - Lights-Out Management English (US), Japanese This utility requires the following minimum firmware revisions:

    • Integrated Lights-Out 2 firmware v1.00 or later
    • Integrated Lights-Out 3 firmware v1.00 or later
    • Integrated Lights-Out 4 firmware v1.00 or later

    The management interface driver must be installed on the server.

    Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.

    ]]>

    Click on the install button to install the utlility on the server. This does not require a reboot.

    The utility will be installed in the program files under the directory Hp\Hponcfg\

    A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HP System Tools > HP Lights-Out Online Configuration Utility".

    ]]>         %ProgramFiles%\HP\hponcfg 0E11 B204 0E11 B206 0E11 B204 103C 3304 0E11 B204 103C 3305 0E11 B203 103C 3304 0E11 B203 103C 3305 103C 3302 103C 3305 0E11 A0ED 103C 3305 0E11 B205 103C 3305 103c 3301 103C 3305 0E11 A0ED 103C 3304 103c 3300 103C 3304 103c 3302 103c 3304 103c 3300 103C 3305 0E11 B205 103C 3304 103c 3301 103C 3304 103c 3307 103c 3309 103c 3306 103c 3309 103c 3302 103c 3309 103c 3300 103c 3309 103c 3308 103c 3309 103c 3301 103c 3309 103c 3300 103c 330e 103c 3301 103c 330e 103c 3302 103c 330e 103c 3306 103c 330e 103c 3307 103c 330e 103c 3308 103c 330e 103C 3306 103C 3381 103C 3307 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 cpqsetup.exe cp024737.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p281014124/v101748/cp024737.exe file://./hp/swpackages/cp024737.exe     new HP Insight Management Agents for Windows Server HP Insight Management Agents for Windows Server Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp023852.exe ServerOptions Storage Networking Server Software - System Management English (US), Japanese From that drive and directory, execute the downloaded file. Click the "Install" button to proceed with the installation. The agents will automatically be installed.]]>
    HP Insight Management Agents User Guide (English), or
    HP Insight Management Agents User Guide (Japanese).

    This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc.

    ]]>         %systemroot%\system32\cpqmgmt %systemroot%\system32\cpqnimgt %systemroot%\system32\cpqmgmt\cqmghost %systemroot%\system32\cpqmgmt\cqmgserv %systemroot%\system32\cpqmgmt\cqmgstor cpqsetup.exe cp023852.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1314504494/v99275/cp023852.exe file://./hp/swpackages/cp023852.exe     new HP Insight Management Agents for Windows Server x64 Editions HP Insight Management Agents for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 x64 cp023853.exe ServerOptions Storage Networking Server Software - System Management English (US), Japanese
    HP Insight Management Agents User Guide (Select English or Japanese in the language selection).

    This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc.

    ]]>         %systemroot%\system32\cpqmgmt %systemroot%\system32\cpqnimgt %systemroot%\system32\cpqmgmt\cqmghost %systemroot%\system32\cpqmgmt\cqmgserv %systemroot%\system32\cpqmgmt\cqmgstor cpqsetup.exe /verbose_log cp023853.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1554660909/v99276/cp023853.exe file://./hp/swpackages/cp023853.exe     HP NC-Series Intel E1E Driver for Windows Server 2008 HP NC-Series Intel E1E Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp017186.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> HP NIC Documentation softpaq, version 10.65. ]]> %systemroot%\system32\drivers 8086 105E 103C 7044 8086 10BC 103C 704B 8086 10B9 103c 704A 8086 10D9 103C 1716 8086 10DA 103C 1717 cpqsetup.exe cp017186.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2037497065/v76287/cp017186.exe file://./hp/swpackages/cp017186.exe HP NC-Series Intel E1E Driver for Windows Server 2008 x64 Editions HP NC-Series Intel E1E Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp017187.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> HP NIC Documentation softpaq, version 10.65. ]]> %systemroot%\system32\drivers 8086 105E 103C 7044 8086 10BC 103C 704B 8086 10B9 103c 704A 8086 10D9 103C 1716 8086 10DA 103C 1717 cpqsetup.exe cp017187.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1374761208/v76288/cp017187.exe file://./hp/swpackages/cp017187.exe HP NC-Series Intel E1E Driver for Windows Server 2008 R2 HP NC-Series Intel E1E Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 cp018229.exe Networking Server Storage Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> HP NIC Documentation softpaq, version 10.65. ]]> %systemroot%\system32\drivers 8086 105E 103C 7044 8086 10BC 103C 704B 8086 10B9 103c 704A 8086 10D9 103C 1716 8086 10DA 103C 1717 cpqsetup.exe cp018229.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p312045338/v80345/cp018229.exe file://./hp/swpackages/cp018229.exe HP NC-Series Intel E1Q Driver for Windows Server 2008 HP NC-Series Intel E1Q Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp021179.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_80_RN_en.]]> %systemroot%\system32\drivers 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 10D3 103C 1785 cpqsetup.exe cp021179.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1979039114/v89766/cp021179.exe file://./hp/swpackages/cp021179.exe HP NC-Series Intel E1Q Driver for Windows Server 2008 x64 Editions HP NC-Series Intel E1Q Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp021180.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_80_RN_en.]]> %systemroot%\system32\drivers 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 10D3 103C 1785 cpqsetup.exe cp021180.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1130997974/v89767/cp021180.exe file://./hp/swpackages/cp021180.exe HP NC-Series Intel E1Q Driver for Windows Server 2008 R2 HP NC-Series Intel E1Q Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp021181.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_80_RN_en.]]> %systemroot%\system32\drivers 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 10D3 103C 1785 cpqsetup.exe cp021181.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1248673686/v89768/cp021181.exe file://./hp/swpackages/cp021181.exe HP NC-Series Intel E1Q Driver for Windows Server 2012 HP NC-Series Intel E1Q Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 cp021182.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_80_RN_en.]]> %systemroot%\system32\drivers 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 10D3 103C 1785 cpqsetup.exe cp021182.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1605346988/v89769/cp021182.exe file://./hp/swpackages/cp021182.exe HP Intel E1R Driver for Windows Server 2008 HP Intel E1R Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp019461.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.]]> %systemroot%\system32\drivers 8086 150e 103c 1780 8086 1521 103c 3380 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 1521 103C 17D1 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 cpqsetup.exe cp019461.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2023476190/v84507/cp019461.exe file://./hp/swpackages/cp019461.exe HP Intel E1R Driver for Windows Server 2008 x64 Editions HP Intel E1R Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp019462.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.]]> %systemroot%\system32\drivers 8086 150e 103c 1780 8086 1521 103c 3380 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 1521 103C 17D1 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 cpqsetup.exe cp019462.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2079567267/v84508/cp019462.exe file://./hp/swpackages/cp019462.exe changed HP Intel E1R Driver for Windows Server 2008 R2 HP Intel E1R Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp025162.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 8086 150e 103c 1780 8086 1521 103c 3380 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 1521 103C 17D1 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 cpqsetup.exe cp025162.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1738530961/v103133/cp025162.exe file://./hp/swpackages/cp025162.exe changed HP Intel E1R Driver for Windows Server 2012 HP Intel E1R Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025163.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 8086 150e 103c 1780 8086 1521 103c 3380 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 1521 103C 17D1 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 cpqsetup.exe cp025163.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2105009553/v103134/cp025163.exe file://./hp/swpackages/cp025163.exe changed HP Intel E1R Driver for Windows Server 2012 R2 HP Intel E1R Driver for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp025164.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 8086 1521 103c 3380 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 1521 103C 17D1 8086 1521 103C 2003 8086 1523 103C 1989 8086 1521 103C 2226 cpqsetup.exe cp025164.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1709486897/v103135/cp025164.exe file://./hp/swpackages/cp025164.exe HP Broadcom 1Gb Driver for Windows Server 2008 HP Broadcom 1Gb Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp022688.exe Networking Server Driver - Network English (US), Japanese The downloaded file is a self-extracting executable with a filename based on the Smart Component number.

    From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.]]> %systemroot%\system32\drivers %systemroot%\system32\drivers 14E4 1679 103C 170C 14E4 1657 103C 169D 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 1657 103C 1904 14E4 165F 103C 2133 14E4 165B 103C 705D cpqsetup.exe cp022688.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p838494450/v95106/cp022688.exe file://./hp/swpackages/cp022688.exe HP Broadcom 1Gb Driver for Windows Server x64 Editions HP Broadcom 1Gb Driver for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp022689.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers %systemroot%\system32\drivers 14E4 1679 103C 170C 14E4 1657 103C 169D 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 1657 103C 1904 14E4 165F 103C 2133 14E4 1665 103C 22BD 14E4 1657 103C 22BE 14E4 165B 103C 705D cpqsetup.exe cp022689.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1146256160/v95107/cp022689.exe file://./hp/swpackages/cp022689.exe HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp023429.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]>

  • VBD driver version 7.8.50.0
  • NDIS 6.0 driver version 7.10.30.0
  • iSCSI offload driver version 7.10.30.0
  • Diagnostic driver version 7.8.51.0
  • Crash dump driver version 7.10.1.0

    • This component contains bxnd and bxois driver updates which are limited in scope to 10Gb devices.]]> %systemroot%\system32\drivers 14E4 16AC 103C 703D 14E4 164C 103C 7037 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1639 103C 7055 cpqsetup.exe cp023429.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p606575899/v97751/cp023429.exe file://./hp/swpackages/cp023429.exe     HP Broadcom 1Gb Multifunction Drivers for Windows Server x64 Editions HP Broadcom 1Gb Multifunction Drivers for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp023430.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.]]>

  • VBD driver version 7.8.50.0
  • NDIS 6.0 driver version 7.10.30.0
  • iSCSI offload driver version 7.10.30.0
  • Diagnostic driver version 7.8.51.0
  • Crash dump driver version 7.10.1.0

    • This component contains bxnd and bxois driver updates which are limited in scope to 10Gb devices.]]> %systemroot%\system32\drivers 14E4 16AC 103C 703D 14E4 164C 103C 7037 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1639 103C 7055 cpqsetup.exe cp023430.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p144992187/v97752/cp023430.exe file://./hp/swpackages/cp023430.exe     changed HP Broadcom 10/20GbE Multifunction Drivers for Windows Server 2008 HP Broadcom 10/20GbE Multifunction Drivers for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows 7 (32-bit) - All Editions cp024628.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]>

  • 10GbE VBD driver version 7.10.70.0
  • NDIS 6.0 driver version 7.10.71.0
  • FCoE offload driver version 7.10.73.0
  • iSCSI offload driver version 7.10.30.0
  • Diagnostic driver version 7.8.51.0
  • Crash dump driver version 7.10.2.0
  • FCoE crash dump driver version 7.10.2.0
    • ]]> %systemroot%\system32\drivers 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 1650 103C 3654 14E4 168E 103C 3382 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 168E 103C 339D 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 193A 14E4 16AF 103C 1930 14E4 16AF 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1931 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16AE 103C 3382 cpqsetup.exe cp024628.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p638452691/v101398/cp024628.exe file://./hp/swpackages/cp024628.exe     changed HP Broadcom 10/20GbE Multifunction Drivers for Windows Server x64 Editions HP Broadcom 10/20GbE Multifunction Drivers for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Vista (64-bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 R2 cp024629.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]>

  • 10GbE VBD driver version 7.10.70.0
  • NDIS 6.0 driver version 7.10.71.0
  • FCoE offload driver version 7.10.73.0
  • iSCSI offload driver version 7.10.30.0
  • Diagnostic driver version 7.8.51.0
  • Crash dump driver version 7.10.2.0
  • FCoE crash dump driver version 7.10.2.0
    • ]]> %systemroot%\system32\drivers 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 1650 103C 3654 14E4 168E 103C 3382 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 168E 103C 339D 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 193A 14E4 16AF 103C 1930 14E4 16AF 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1931 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16AE 103C 3382 14E4 16A2 103C 22FA 14E4 16AD 103C 22FA 14E4 16A4 103C 22FA cpqsetup.exe cp024629.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2063629921/v101399/cp024629.exe file://./hp/swpackages/cp024629.exe     changed HP QLogic P3P Multifunction Driver for Windows Server 2008 HP QLogic P3P Multifunction Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024562.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 4040 0100 103C 705A 4040 0100 103c 1740 1077 8020 103C 3733 1077 8020 103C 3346 1077 8020 103C 1957 cpqsetup.exe cp024562.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p677931535/v101255/cp024562.exe file://./hp/swpackages/cp024562.exe changed HP QLogic P3P Multifunction Driver for Windows Server 2008 x64 Editions HP QLogic P3P Multifunction Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp024563.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 4040 0100 103C 705A 4040 0100 103c 1740 1077 8020 103C 3733 1077 8020 103C 3346 1077 8020 103C 1957 cpqsetup.exe cp024563.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p389205072/v101256/cp024563.exe file://./hp/swpackages/cp024563.exe changed HP QLogic P3P Multifunction Driver for Windows Server 2008 R2 HP QLogic P3P Multifunction Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp024564.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 4040 0100 103C 705A 4040 0100 103c 1740 1077 8020 103C 3733 1077 8020 103C 3346 1077 8020 103C 1957 cpqsetup.exe cp024564.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1398775720/v101257/cp024564.exe file://./hp/swpackages/cp024564.exe changed HP QLogic P3P Multifunction Driver for Windows Server 2012 HP QLogic P3P Multifunction Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024560.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 4040 0100 103C 705A 4040 0100 103c 1740 1077 8020 103C 3733 1077 8020 103C 3346 1077 8020 103C 1957 cpqsetup.exe cp024560.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2040148688/v101253/cp024560.exe file://./hp/swpackages/cp024560.exe changed HP QLogic P3P Multifunction Driver for Windows Server 2012 R2 HP QLogic P3P Multifunction Driver for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp024561.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 4040 0100 103C 705A 4040 0100 103c 1740 1077 8020 103C 3733 1077 8020 103C 3346 1077 8020 103C 1957 cpqsetup.exe cp024561.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1199094781/v101254/cp024561.exe file://./hp/swpackages/cp024561.exe HP QLogic P3P iSCSI Driver for Windows Server 2008 HP QLogic P3P iSCSI Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp021538.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 1077 8022 103C 3347 1077 8022 103C 1957 cpqsetup.exe cp021538.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1817620329/v90600/cp021538.exe file://./hp/swpackages/cp021538.exe HP QLogic P3P iSCSI Driver for Windows Server 2008 x64 Editions HP QLogic P3P iSCSI Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp021539.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 1077 8022 103C 3347 1077 8022 103C 1957 cpqsetup.exe cp021539.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p495030235/v90601/cp021539.exe file://./hp/swpackages/cp021539.exe HP QLogic P3P iSCSI Driver for Windows Server 2012 and Windows Server 2012 R2 HP QLogic P3P iSCSI Driver for Windows Server 2012 and Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp021540.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 1077 8022 103C 3347 1077 8022 103C 1957 cpqsetup.exe cp021540.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1262150886/v90602/cp021540.exe file://./hp/swpackages/cp021540.exe changed HP Emulex 10/20 GbE Driver for Windows Server 2008 HP Emulex 10/20 GbE Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024640.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0700 103c 174b 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3344 19A2 0710 103C 3340 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 19A2 0710 103C 184E cpqsetup.exe cp024640.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p202898614/v101436/cp024640.exe file://./hp/swpackages/cp024640.exe changed HP Emulex 10/20 GbE Driver for Windows Server 2008 x64 Editions HP Emulex 10/20 GbE Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 cp024641.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0700 103c 174b 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3344 19A2 0710 103C 3340 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 19A2 0710 103C 184E 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 cpqsetup.exe cp024641.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1551790454/v101437/cp024641.exe file://./hp/swpackages/cp024641.exe changed HP Emulex 10/20 GbE Driver for Windows Server 2008 R2 HP Emulex 10/20 GbE Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp024642.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0700 103c 174b 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3344 19A2 0710 103C 3340 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 19A2 0710 103C 184E 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F cpqsetup.exe cp024642.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1600993173/v101438/cp024642.exe file://./hp/swpackages/cp024642.exe changed HP Emulex 10/20 GbE Driver for Windows Server 2012 HP Emulex 10/20 GbE Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024638.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0700 103c 174b 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3344 19A2 0710 103C 3340 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 19A2 0710 103C 184E 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0728 103C 1935 10DF 0728 103C 220A 10DF 0728 103C 1934 10DF 0728 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F cpqsetup.exe cp024638.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p479384865/v101434/cp024638.exe file://./hp/swpackages/cp024638.exe changed HP Emulex 10/20 GbE Driver for Windows Server 2012 R2 HP Emulex 10/20 GbE Driver for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp024639.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0700 103c 174b 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3344 19A2 0710 103C 3340 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 19A2 0710 103C 184E 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0728 103C 1935 10DF 0728 103C 220A 10DF 0728 103C 1934 10DF 0728 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F cpqsetup.exe cp024639.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p279593416/v101435/cp024639.exe file://./hp/swpackages/cp024639.exe changed HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024645.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 174b 19A2 0712 103C 3344 19A2 0712 103C 337C 19A2 0712 103C 337B 19A2 0712 103C 3376 cpqsetup.exe cp024645.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1325230507/v101444/cp024645.exe file://./hp/swpackages/cp024645.exe changed HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 x64 Editions HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 cp024646.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 174b 19A2 0712 103C 3344 19A2 0712 103C 337C 19A2 0712 103C 337B 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 cpqsetup.exe cp024646.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1981659848/v101445/cp024646.exe file://./hp/swpackages/cp024646.exe changed HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 R2 HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp024647.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 174b 19A2 0712 103C 3344 19A2 0712 103C 337C 19A2 0712 103C 337B 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 cpqsetup.exe cp024647.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p446991324/v101446/cp024647.exe file://./hp/swpackages/cp024647.exe changed HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2012 HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp024643.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 174b 19A2 0712 103C 3344 19A2 0712 103C 337C 19A2 0712 103C 337B 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 cpqsetup.exe cp024643.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1988048556/v101442/cp024643.exe file://./hp/swpackages/cp024643.exe changed HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2012 R2 HP Emulex 10/20 GbE iSCSI Driver for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp024644.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 174b 19A2 0712 103C 3344 19A2 0712 103C 337C 19A2 0712 103C 337B 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 cpqsetup.exe cp024644.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1697719791/v101443/cp024644.exe file://./hp/swpackages/cp024644.exe HP Intel ixn/ixt Drivers for Windows Server 2008 HP Intel ixn/ixt Drivers for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp019449.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>

  • Intel(R) 10 Gigabit NDIS 6.x driver for ixn devices, version 3.5.22.0
  • Intel(R) 10 Gigabit NDIS 6.x driver for ixt devices, version 3.4.47.1
  • Intel(R) Gigabit Adapter NDIS 6.x driver, version 1.0.9.0
  • Intel(R) Network Adapter Diagnostic Driver, version 1.3.0.6


    • For additional release notes, see http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.

    ]]> %systemroot%\system32\drivers %systemroot%\system32\drivers %systemroot%\system32\drivers 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 152E 0000 0000 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 192D 8086 1530 0000 0000 8086 1515 103C 192D 8086 1528 103C 211A 8086 1528 103C 2004 8086 10FB 103C 211B 8086 1515 103C 211A 8086 10ED 103C 211B 8086 10FB 103C 2159 cpqsetup.exe cp019449.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p92542868/v84489/cp019449.exe file://./hp/swpackages/cp019449.exe     HP Intel ixn/ixt Drivers for Windows Server 2008 x64 Editions HP Intel ixn/ixt Drivers for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp019450.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>

  • Intel(R) 10 Gigabit NDIS 6.x driver for ixn devices, version 3.5.22.0
  • Intel(R) 10 Gigabit NDIS 6.x driver for ixt devices, version 3.4.47.0
  • Intel(R) Gigabit Adapter NDIS 6.x driver, version 1.0.9.0
  • Intel(R) Network Adapter Diagnostic Driver, version 1.3.0.6


    • For additional release notes, see http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.

    ]]> %systemroot%\system32\drivers %systemroot%\system32\drivers %systemroot%\system32\drivers 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 152E 0000 0000 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 192D 8086 1530 0000 0000 8086 1515 103C 192D 8086 1528 103C 211A 8086 10FB 103C 211B 8086 1515 103C 211A 8086 10ED 103C 211B 8086 10FB 103C 2159 cpqsetup.exe cp019450.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p910160171/v84490/cp019450.exe file://./hp/swpackages/cp019450.exe     changed HP Intel ixn/ixt Drivers for Windows Server 2008 R2 HP Intel ixn/ixt Drivers for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp025165.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>

  • Intel(R) 10 Gigabit NDIS 6.x driver for ixn devices, version 3.9.58.9101
  • Intel(R) 10 Gigabit NDIS 6.x driver for ixt devices, version 3.9.58.9101
  • Intel(R) Gigabit Adapter NDIS 6.x driver, version 1.0.15.4
  • Intel(R) Network Adapter Diagnostic Driver, version 1.3.0.6
    • ]]> %systemroot%\system32\drivers %systemroot%\system32\drivers %systemroot%\system32\drivers 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 152E 0000 0000 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 192D 8086 1530 0000 0000 8086 1515 103C 192D 8086 1528 103C 211A 8086 10FB 103C 211B 8086 1515 103C 211A 8086 10ED 103C 211B 8086 10FB 103C 2159 cpqsetup.exe cp025165.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p275520945/v103136/cp025165.exe file://./hp/swpackages/cp025165.exe     changed HP Intel ixn/ixt Drivers for Windows Server 2012 HP Intel ixn/ixt Drivers for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp025166.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>

  • Intel(R) 10 Gigabit NDIS 6.x driver for ixn devices, version 3.9.58.9101
  • Intel(R) 10 Gigabit NDIS 6.x driver for ixt devices, version 3.9.58.9101
  • Intel(R) Gigabit Adapter NDIS 6.x driver, version 1.0.15.4
  • Intel(R) Network Adapter Diagnostic Driver, version 1.3.0.6
    • ]]> %systemroot%\system32\drivers %systemroot%\system32\drivers %systemroot%\system32\drivers 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 152E 0000 0000 8086 10ED 103C 17D3 8086 10ED 103C 18D0 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 1530 0000 0000 8086 1515 103C 192D 8086 1528 103C 192D 8086 1528 103C 211A 8086 10FB 103C 211B 8086 1515 103C 211A 8086 10ED 103C 211B 8086 10FB 103C 2159 cpqsetup.exe cp025166.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1676966216/v103137/cp025166.exe file://./hp/swpackages/cp025166.exe     changed HP Intel ixn/ixt Drivers for Windows Server 2012 R2 HP Intel ixn/ixt Drivers for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp025167.exe Networking Server Driver - Network English (US), Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]>

  • Intel(R) 10 Gigabit NDIS 6.x driver for ixn devices, version 3.9.58.9101
  • Intel(R) 10 Gigabit NDIS 6.x driver for ixt devices, version 3.9.58.9101
  • Intel(R) Gigabit Adapter NDIS 6.x driver, version 1.0.15.4
  • Intel(R) Network Adapter Diagnostic Driver, version 1.3.0.6
    • ]]> %systemroot%\system32\drivers %systemroot%\system32\drivers %systemroot%\system32\drivers 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 152E 0000 0000 8086 10ED 103C 17D3 8086 10ED 103C 18D0 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 1530 0000 0000 8086 1515 103C 192D 8086 1528 103C 192D 8086 1528 103C 211A 8086 10FB 103C 211B 8086 1515 103C 211A 8086 10ED 103C 211B 8086 10FB 103C 2159 cpqsetup.exe cp025167.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1455987319/v103138/cp025167.exe file://./hp/swpackages/cp025167.exe     changed HP Network Configuration Utility for Windows Server 2008 HP Network Configuration Utility Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp023337.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> %systemroot%\system32\drivers 14E4 16AC 103C 703D 14E4 1679 103C 170C 8086 105E 103C 7044 14E4 164C 103C 7037 8086 10BC 103C 704B 8086 10D9 103C 1716 8086 10DA 103C 1717 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 4040 0100 103C 705A 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 15b3 6764 103c 3313 19a2 0700 103c 174a 19a2 0700 103c 3314 4040 0100 103c 1740 19a2 0700 103c 1747 19a2 0700 103c 1746 8086 150e 103c 1780 15B3 6746 103C 1781 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3340 1077 8020 103C 3733 1077 8020 103C 3346 8086 10D3 103C 1785 19A2 0710 103C 3344 8086 1521 103c 3380 8086 1521 103C 337F 14E4 1657 103C 169D 14E4 168E 103C 3382 14E4 1657 103C 3383 14E4 1657 103C 3372 19A2 0710 103C 337C 19A2 0710 103C 337B 19A2 0710 103C 3376 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 165F 103C 1786 14E4 168E 103C 339D 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 8086 10F8 103C 18D0 19A2 0710 103C 184E 14E4 1655 103C 18D2 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 14E4 168E 103C 18D3 8086 1521 103C 17D1 14E4 1657 103C 1904 14E4 168E 103C 1931 8086 1528 103C 192D 14E4 168E 103C 193A 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 1077 8020 103C 1957 14E4 165F 103C 2133 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1523 103C 1989 8086 10FB 103C 2159 8086 1521 103C 2003 8086 1521 103C 2226 14E4 1639 103C 7055 cpqsetup.exe cp023337.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1469929957/v97252/cp023337.exe file://./hp/swpackages/cp023337.exe changed HP Network Configuration Utility for Windows Server 2008 x64 Editions HP Network Configuration Utility Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp023338.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 14E4 16AC 103C 703D 14E4 1679 103C 170C 8086 105E 103C 7044 14E4 164C 103C 7037 8086 10BC 103C 704B 8086 10D9 103C 1716 8086 10DA 103C 1717 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 4040 0100 103C 705A 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 15b3 6764 103c 3313 19a2 0700 103c 174a 19a2 0700 103c 3314 4040 0100 103c 1740 19a2 0700 103c 1747 19a2 0700 103c 1746 8086 150e 103c 1780 15B3 6746 103C 1781 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3340 1077 8020 103C 3733 1077 8020 103C 3346 8086 10D3 103C 1785 19A2 0710 103C 3344 8086 1521 103c 3380 8086 1521 103C 337F 14E4 1657 103C 169D 14E4 168E 103C 3382 19A2 0710 103C 337C 19A2 0710 103C 337B 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 168E 103C 17A5 14E4 168E 103C 1798 19A2 0710 103C 3376 8086 10c9 8086 a01c 8086 10c9 8086 a03c 14E4 165F 103C 1786 8086 10F8 103C 18D0 14E4 168E 103C 339D 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 19A2 0710 103C 184E 14E4 1655 103C 18D2 14E4 168E 103C 18D3 8086 1521 103C 17D1 8086 10FB 103C 17D0 8086 10F8 103C 17D2 8086 10FB 103C 17D3 14E4 1657 103C 1904 14E4 168E 103C 1931 8086 1528 103C 192D 14E4 168E 103C 193A 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 1077 8020 103C 1957 14E4 165F 103C 2133 8086 1528 103C 211A 8086 1523 103C 1989 8086 10FB 103C 2159 8086 1521 103C 2003 8086 1521 103C 2226 14E4 1639 103C 7055 cpqsetup.exe cp023338.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p409049109/v97253/cp023338.exe file://./hp/swpackages/cp023338.exe changed HP Network Configuration Utility for Windows Server 2008 R2 HP Network Configuration Utility Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials cp023339.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 14E4 16AC 103C 703D 14E4 1679 103C 170C 8086 105E 103C 7044 14E4 164C 103C 7037 8086 10BC 103C 704B 8086 10D9 103C 1716 8086 10DA 103C 1717 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 4040 0100 103C 705A 8086 10D3 103C 3250 8086 10C9 103C 323F 8086 10E7 103C 31FF 15b3 6764 103c 3313 19a2 0700 103c 174a 19a2 0700 103c 3314 4040 0100 103c 1740 19a2 0700 103c 1747 19a2 0700 103c 1746 8086 150e 103c 1780 15B3 6746 103C 1781 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3340 1077 8020 103C 3733 1077 8020 103C 3346 8086 10D3 103C 1785 19A2 0710 103C 3344 8086 1521 103c 3380 8086 1521 103C 337F 14E4 1657 103C 169D 14E4 168E 103C 3382 14E4 1657 103C 3383 14E4 1657 103C 3372 19A2 0710 103C 337C 19A2 0710 103C 337B 14E4 168E 103C 17A5 14E4 168E 103C 1798 19A2 0710 103C 3376 14E4 165F 103C 1786 8086 10F8 103C 18D0 14E4 168E 103C 339D 8086 1523 103C 339F 8086 1521 103C 339E 8086 1523 103C 18D1 19A2 0710 103C 184E 14E4 1655 103C 18D2 14E4 168E 103C 18D3 8086 1521 103C 17D1 8086 10FB 103C 17D0 8086 10F8 103C 17D2 8086 10FB 103C 17D3 14E4 1657 103C 1904 14E4 168E 103C 1931 8086 1528 103C 192D 14E4 168E 103C 193A 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 1077 8020 103C 1957 14E4 165F 103C 2133 8086 1528 103C 211A 8086 1523 103C 1989 8086 10FB 103C 2159 8086 1521 103C 2003 8086 1521 103C 2226 14E4 1639 103C 7055 cpqsetup.exe cp023339.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p203784378/v97254/cp023339.exe file://./hp/swpackages/cp023339.exe changed HP ProLiant Converged Network Utility for Windows Server 2008 HP ProLiant Converged Network Utility for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024476.exe Networking Server Software - Network English (US), Japanese %ProgramFiles%\HP Converged Network Utility 14E4 168E 103C 1932 14E4 168E 103C 193A 14E4 168E 103C 1930 14E4 168E 103C 1933 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 168E 103C 1931 cpqsetup.exe cp024476.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p564598004/v101036/cp024476.exe file://./hp/swpackages/cp024476.exe changed HP ProLiant Converged Network Utility for Windows Server x64 Editions HP ProLiant Converged Network Utility for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024477.exe Networking Server Software - Network English (US), Japanese %ProgramFiles%\HP Converged Network Utility 14E4 168E 103C 1932 14E4 168E 103C 193A 14E4 168E 103C 1930 14E4 168E 103C 1933 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 168E 103C 1931 14E4 16A2 103C 22FA cpqsetup.exe cp024477.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p922042289/v101037/cp024477.exe file://./hp/swpackages/cp024477.exe new HP Mellanox CX3 Driver for Windows Server 2008 R2 HP Mellanox CX3 Driver for Windows Server 2008 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 cp024294.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 15B3 1007 103C 801F 15B3 1007 103C 8020 15B3 1004 103C 8020 15B3 1004 103C 801F 15B3 1003 103C 18CF 15B3 1003 103C 18CE 15B3 1003 103C 1777 15B3 1003 103C 18D6 15B3 1003 103C 18CD 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1003 103C 17C9 cpqsetup.exe cp024294.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p993836216/v100627/cp024294.exe file://./hp/swpackages/cp024294.exe new HP Mellanox CX3 Driver for Windows Server 2012 HP Mellanox CX3 Driver for Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 cp024295.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 15B3 1007 103C 801F 15B3 1007 103C 8020 15B3 1004 103C 8020 15B3 1004 103C 801F 15B3 1003 103C 18CF 15B3 1003 103C 18CE 15B3 1003 103C 1777 15B3 1003 103C 18D6 15B3 1003 103C 18CD 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1003 103C 17C9 cpqsetup.exe cp024295.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1449297988/v100628/cp024295.exe file://./hp/swpackages/cp024295.exe new HP Mellanox CX3 Driver for Windows Server 2012 R2 HP Mellanox CX3 Driver for Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 cp024296.exe Networking Server Driver - Network English (US), Japanese From that drive and directory, execute the downloaded file.

    Click the Install button to proceed with the installation.
    ]]> %systemroot%\system32\drivers 15B3 1007 103C 801F 15B3 1007 103C 8020 15B3 1004 103C 8020 15B3 1004 103C 801F 15B3 1003 103C 18CF 15B3 1003 103C 18CE 15B3 1003 103C 1777 15B3 1003 103C 18D6 15B3 1003 103C 18CD 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1003 103C 17C9 cpqsetup.exe cp024296.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p354047253/v100629/cp024296.exe file://./hp/swpackages/cp024296.exe HP ProLiant Integrated SATA Controller Driver for Windows Server 2008 x86 Edition Storport miniport driver for the HP ProLiant Integrated SATA Controller Broadcom Corporation Microsoft Windows Server 2008 W32 cp024592.exe Server Driver - Storage Controller English (US), Japanese %systemroot%\system32\drivers 1166 024a 103c 3112 cpqsetup.exe cp024592.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1091226001/v101307/cp024592.exe file://./hp/swpackages/cp024592.exe HP ProLiant Integrated SATA Controller Driver for Windows Server 2008 x64 Edition Storport miniport driver for the HP ProLiant Integrated SATA Controller Broadcom Corporation Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition cp024595.exe Server Driver - Storage Controller English (US), Japanese %systemroot%\system32\drivers 1166 024a 103c 3112 cpqsetup.exe cp024595.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1436804448/v101315/cp024595.exe file://./hp/swpackages/cp024595.exe HP ProLiant Integrated SATA Controller Driver for Microsoft Windows Server 2008 R2 Storport miniport driver for the HP ProLiant Integrated SATA Controller Broadcom Corporation Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 cp024596.exe Server Driver - Storage Controller English (US), Japanese %systemroot%\system32\drivers 1166 024a 103c 3112 cpqsetup.exe cp024596.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1900024012/v101316/cp024596.exe file://./hp/swpackages/cp024596.exe HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2008 HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp010975.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0054 103C 3228 1000 0050 103C 1704 1000 0058 103C 3229 1000 0056 103c 322B 1000 0058 103C 322D MSA2012SA cpqsetup.exe cp010975.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1977345347/v53978/cp010975.exe file://./hp/swpackages/cp010975.exe HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2008 x64 Editions HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business cp010978.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0054 103C 3228 1000 0050 103C 1704 1000 0058 103C 3229 1000 0056 103c 322B 1000 0058 103C 322D MSA2012SA cpqsetup.exe cp010978.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1260375443/v53981/cp010978.exe file://./hp/swpackages/cp010978.exe HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 x86 Editions HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 x86 Editions LSI Logic Corporation Microsoft Windows Server 2008 W32 cp021866.exe Storage Server Driver - Storage Controller English (US) Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

    ]]>         %systemroot%\system32\drivers 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe cp021866.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1348702723/v91862/cp021866.exe file://./hp/swpackages/cp021866.exe     HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 x64 Editions HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 x64 Editions LSI Logic Corporation Microsoft Windows Server 2008 x64 cp021868.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe cp021868.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p538846743/v91883/cp021868.exe file://./hp/swpackages/cp021868.exe HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 R2 Editions HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2008 R2 Editions LSI Logic Corporation Microsoft Windows Server 2008 R2 cp021871.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe cp021871.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1227056850/v91900/cp021871.exe file://./hp/swpackages/cp021871.exe HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2012 x64 Editions HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2012 x64 Editions LSI Logic Corporation Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp021873.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe cp021873.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1998963414/v91904/cp021873.exe file://./hp/swpackages/cp021873.exe HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2012 R2 x64 Editions HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2012 R2 x64 Editions LSI Logic Corporation Microsoft Windows Server 2012 R2 cp023630.exe Storage Server Driver - Storage Controller English (US) %systemroot%\system32\drivers 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 cpqsetup.exe cp023630.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p50367324/v98332/cp023630.exe file://./hp/swpackages/cp023630.exe HP ProLiant Smart Array 5x and 6x Controller Driver for Windows Server 2008 HP ProLiant Smart Array 5x and 6x Controller Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp010826.exe Storage Server Driver - Storage Controller English (US), Japanese From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 0E11 B060 0E11 4070 0E11 B060 0E11 4070 cpqsetup.exe cp010826.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1021275832/v53524/cp010826.exe file://./hp/swpackages/cp010826.exe new HP ProLiant Smart Array 5x and 6x Controller Driver for Windows Server 2003/2008 x64 Editions HP ProLiant Smart Array 5x and 6x Controller Driver for Windows Server 2003 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition cp010823.exe Storage Server Driver - Storage Controller English (US), Japanese From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 0E11 B060 0E11 4070 0E11 B060 0E11 4070 cpqsetup.exe cp010823.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p11291960/v53520/cp010823.exe file://./hp/swpackages/cp010823.exe HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2008 HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows 7 (32-bit) - All Editions cp020622.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103C 3220 103C 3225 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 3233 103c 3233 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 ven_103c&dev_323b&subsys_334d103c cpqsetup.exe cp020622.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1171621648/v87981/cp020622.exe file://./hp/swpackages/cp020622.exe HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2008 x64 Edition HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2008 x64 Edition Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Small Business Server 2011 Standard and Essentials cp020623.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103C 3220 103C 3225 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 3233 103c 3233 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 ven_103c&dev_323b&subsys_334d103c cpqsetup.exe cp020623.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p991297265/v87983/cp020623.exe file://./hp/swpackages/cp020623.exe HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012 x64 Edition HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012 x64 Edition Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp020624.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103C 3230 103C 3223 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 3233 103c 3233 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 103C 323A 103C 324C ven_103c&dev_323b&subsys_334d103c cpqsetup.exe cp020624.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1847485913/v87986/cp020624.exe file://./hp/swpackages/cp020624.exe HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2008 HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows 7 (32-bit) - All Editions cp020711.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1920 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103C 323C 103C 1929 103C 323C 103C 192A 103c 323c 103c 1925 cpqsetup.exe cp020711.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1365263850/v88264/cp020711.exe file://./hp/swpackages/cp020711.exe changed HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2008 x64 Edition HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2008 x64 Edition Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Storage Server 2008 R2 cp024352.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1920 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1925 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c8 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 103c 3239 103c 21cb 103c 3239 103c 21c5 103c 3239 103c 21be 103c 3239 103c 21ca cpqsetup.exe /verbose_log cp024352.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1295856921/v100729/cp024352.exe file://./hp/swpackages/cp024352.exe changed HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2012 x64 Edition HP ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2012 x64 Edition Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024361.exe Storage Server Driver - Storage Controller English (US), Japanese

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1920 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1925 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c8 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 103c 3239 103c 21cb 103c 3239 103c 21c5 103c 3239 103c 21be 103c 3239 103c 21ca cpqsetup.exe /verbose_log cp024361.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1659349858/v100738/cp024361.exe file://./hp/swpackages/cp024361.exe new HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2008 (x86) 32-bit HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2008 (x86) 32-bit Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp021155.exe Storage Server Software - Storage Controller English (US)

    From that drive and directory, execute the downloaded file.]]> %programfiles%\hp\cissesrv 103C 3220 103C 3225 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 8086 3A25 103C 3118 103C 323A 103C 324A 103C 323A 103C 324B 103c 3233 103c 3233 1002 4391 103C 1778 8086 3b25 103C 3118 1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1c04 103c 3118 103c 323b 103c 3353 103C 323B 103C 3356 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3350 8086 1C04 1590 006C 8086 8C04 1590 0084 ven_103c&dev_323b&subsys_334d103c 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1920 103c 323c 103c 1925 103C 323C 103C 1929 103C 323C 103C 192A 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 cpqsetup.exe cp021155.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1641300176/v89721/cp021155.exe file://./hp/swpackages/cp021155.exe new HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2008 x64 Editions and Windows Server 2012 HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2008 x64 Editions and Windows Server 2012 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024324.exe Storage Server Software - Storage Controller English (US)

    From that drive and directory, execute the downloaded file.]]> %programfiles%\hp\cissesrv 103C 3220 103C 3225 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 8086 3A25 103C 3118 103C 323A 103C 324A 103C 323A 103C 324B 103c 3233 103c 3233 1002 4391 103C 1778 8086 3b25 103C 3118 1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1c04 103c 3118 103c 323b 103c 3353 103C 323B 103C 3356 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 8086 1C04 1590 006C 8086 8C04 1590 0084 ven_103c&dev_323b&subsys_334d103c 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1920 103c 323c 103c 1925 103C 323C 103C 1929 103C 323C 103C 192A 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c8 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 8086 8D66 1590 009D 8086 8D06 1590 009C 103c 3239 103c 21cb 103c 3239 103c 21c5 103c 3239 103c 21be 103c 3239 103c 21ca cpqsetup.exe /verbose_log cp024324.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1087583179/v100685/cp024324.exe file://./hp/swpackages/cp024324.exe new HP ProLiant Smart Array Device Manager Extension for Windows Server 2003/2008 HP ProLiant Smart Array Device Manager Extension for Windows Server 2003/2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2008 W32 cp010821.exe Storage Server Driver - Storage Controller English (US) From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\ 0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 cpqsetup.exe cp010821.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1577310363/v53518/cp010821.exe file://./hp/swpackages/cp010821.exe new HP ProLiant Smart Array Device Manager Extension for Windows Server 2003/2008 x64 Editions HP ProLiant Smart Array Device Manager Extension for Windows Server 2003/2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition cp010825.exe Storage Server Driver - Storage Controller English (US), Japanese From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\ 0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 0E11 B060 0E11 4070 0E11 B060 0E11 4070 cpqsetup.exe cp010825.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1220948931/v53522/cp010825.exe file://./hp/swpackages/cp010825.exe changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2008 HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp024077.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 1590 005F 1590 005F 8086 1C04 1590 006C 8086 8C04 1590 0084 cpqsetup.exe /verbose_log cp024077.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1175376342/v100095/cp024077.exe file://./hp/swpackages/cp024077.exe     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2008 x64 Editions HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Small Business Server 2011 Standard and Essentials cp024078.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 1590 005F 1590 005F 8086 1C04 1590 006C 8086 8C04 1590 0084 cpqsetup.exe /verbose_log cp024078.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1425805799/v100097/cp024078.exe file://./hp/swpackages/cp024078.exe     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2012 and Microsoft Windows Server 2012 R2 x64 Editions HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Windows Server 2012 and Microsoft Windows Server 2012 R2 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024079.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 1590 005F 1590 005F 8086 1C04 1590 006C 8086 8C04 1590 0084 cpqsetup.exe /verbose_log cp024079.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1090492259/v100099/cp024079.exe file://./hp/swpackages/cp024079.exe     changed Dynamic Smart Array B140i Controller Driver for Windows 2008 x64 Editions Dynamic Smart Array B140i Controller Driver for Windows 2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Storage Server 2008 R2 cp024080.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 8D66 1590 009D 8086 8D06 1590 009C cpqsetup.exe /verbose_log cp024080.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1300701728/v100101/cp024080.exe file://./hp/swpackages/cp024080.exe     changed Dynamic Smart Array B140i Controller Driver for Windows 2012 and 2012 R2 x64 Editions Dynamic Smart Array B140i Controller Driver for Windows 2012 and 2012 R2 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Storage Server 2012 Microsoft Windows Storage Server 2012 R2 cp024083.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 8D66 1590 009D 8086 8D06 1590 009C cpqsetup.exe /verbose_log cp024083.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1987867255/v100110/cp024083.exe file://./hp/swpackages/cp024083.exe     HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Windows Server 2003/2008 HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Windows Server 2003/2008 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2008 W32 cp018782.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 3A25 103C 3118 1002 4391 103C 1778 8086 3b25 103C 3118 8086 1c04 103c 3118 cpqsetup.exe cp018782.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1132108511/v82176/cp018782.exe file://./hp/swpackages/cp018782.exe     HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Windows 2003/2008 x64 Editions HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Microsoft Windows Server 2003/2008 x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Small Business Server 2011 Standard and Essentials cp020545.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 3A25 103C 3118 1002 4391 103C 1778 8086 3b25 103C 3118 8086 1c04 103c 3118 cpqsetup.exe cp020545.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2078115731/v87686/cp020545.exe file://./hp/swpackages/cp020545.exe     HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Microsoft Windows Server 2012 and Microsoft Windows Server 2012 R2 HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Microsoft Windows Server 2012 and Microsoft Windows Server 2012 R2 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022401.exe Storage Server Driver - Storage English (US), Japanese Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 8086 3A25 103C 3118 1002 4391 103C 1778 8086 3b25 103C 3118 8086 1c04 103c 3118 cpqsetup.exe cp022401.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1477327085/v93993/cp022401.exe file://./hp/swpackages/cp022401.exe     HP StoreEver Tape Drivers for Windows HP StoreEver Tape Drivers for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Storage Server 2003 Microsoft Windows Server 2003 64-Bit Edition (Itanium) Microsoft Windows Server 2003 x64 Edition Microsoft Windows XP Professional Microsoft Windows Server 2008 Itanium Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Unified Data Storage Server 2003 x64 Edition Microsoft Windows Storage Server 2003 x64 Editions Microsoft Windows Vista (32-bit) Microsoft Windows Vista (64-bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows 7 (32-bit) - All Editions Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Vista Business (32-bit) Microsoft Windows Vista Business (64-bit) Microsoft Windows Vista Enterprise (32-bit) Microsoft Windows Vista Enterprise (64-bit) Microsoft Windows 7 Professional (32-bit) Microsoft Windows 7 Professional (64-bit) Microsoft Windows 7 Enterprise (32-bit) Microsoft Windows 7 Enterprise (64-bit) Microsoft Windows Server 2012 Microsoft Windows 8 (64-bit) Microsoft Windows Server 2012 R2 Microsoft Windows 8.1 (64-bit) cp023805.exe Storage ServerOptions Server Driver - Storage Tape English (US) Download the HP Storage Tape Drivers for Windows installer. The installer can be executed by clicking on the downloaded file or invoking from command line.

             Example: C:\>cp004354.exe.

    The HP Storage Tape Drivers for Windows can be executed in a graphical user interface mode or silent mode. If /s or /silent command line parameter is supplied, the  HP Storage Tape Drivers for Windows executes quietly without displaying graphical user interface and honors all command line parameters. In graphical user interface mode, all command line parameters are ignored.

    Command Line Parameters

    /h /help /? Help
    /s /silent Runs without graphical user interface (if any of the drivers are already up to date, /f /force option is required).
    /f /force Install continues regardless of version previously installed.
    /i /install Install all available drivers.
    /i:[driver1.inf, driver2.inf...] Install only driver1.inf and driver2.inf.
    Example: /i:hplto.inf will only install HP LTO Tape Driver.
    /u /install Uninstall all available drivers.
    /u:[driver1.inf, driver2.inf...] Uninstall only driver1.inf and driver2.inf.
    Example: /u:hplto.inf will only uninstall HP LTO Tape Driver.
    /InstallLTO Installs HP LTO Tape Driver only.
    This parameter is deprecated; use /i:hplto.inf instead.
    /UninstallLTO Uninstall LTO Tape Driver only.
    This parameter is deprecated; use /u:hplto.inf instead.
    ]]>         %systemroot%\system32\drivers Setup.exe cp023805.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1754488765/v99113/cp023805.exe file://./hp/swpackages/cp023805.exe     new HP System Management Homepage for Windows x86 HP System Management Homepage Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 Itanium Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows 7 (32-bit) - All Editions Microsoft Windows Storage Server 2008 cp025366.exe Server Software - System Management English (US), Japanese
  • Download the Smart Component (cpxxxxxx.exe) file to a local directory on the server where you want to install the software.
  • Change to the directory.
  • Run the .exe file by double-clicking it. A dialog box will display.
  • Click the ‘Install’ button to install the SMH.
    • ]]>         %systemdrive%\hp\hpsmh\bin cpqinstall.bat cp025366.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1954776237/v103880/cp025366.exe file://./hp/swpackages/cp025366.exe     changed HP System Management Homepage for Windows x64 HP System Management Homepage Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Vista (64-bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Storage Server 2008 R2 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Server 2012 Microsoft Windows MultiPoint Server 2011 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp025367.exe Server Software - System Management English (US), Japanese
  • Download the Smart Component (cpxxxxxx.exe) file to a local directory on the server where you want to install the software.
  • Change to the directory.
  • Run the .exe file by double-clicking it. A dialog box will display.
  • Click the ‘Install’ button to install the SMH.
    • ]]>         %systemdrive%\hp\hpsmh\bin cpqinstall.bat cp025367.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p910098843/v103881/cp025367.exe file://./hp/swpackages/cp025367.exe     new HP Insight Diagnostics Online Edition for Windows HP Insight Diagnostics Online Edition for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp025809.exe Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified) The following component(s) are required for HP Insight Diagnostics Online Edition for Linux:

    • HP System Management Homepage, version 7.0.0-12 or higher

    The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

    • HP ProLiant Agentless Management Service, version 9.0.0.0 or higher
    • HP ProLiant Integrated Lights-Out Management Interface Driver, version 1.15.0.0 or higher


     

    ]]>         From that drive and directory, execute the downloaded file.]]>
  • View the hardware configuration of the machine.
  • View the server Integrated Management log.
  • View the software configuration of the machine.
  • Compare historical configurations of the machine.
  • Capture a new configuration sample.The HP Insight Diagnostics Online Edition for Windows contains the Windows program and related files. ]]> %SystemDrive%\hp\hpdiags setup.exe cp025809.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p321435311/v105452/cp025809.exe file://./hp/swpackages/cp025809.exe new HP Insight Diagnostics Online Edition for Windows x64 Editions HP Insight Diagnostics Online Edition for Windows x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 Small Business cp025808.exe Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified)
  • HP System Management Homepage, version 7.0.0-12 or higher
    • The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
    • HP ProLiant Agentless Management Service, version 9.0.0.0 or higher
    • HP ProLiant Integrated Lights-Out Management Interface Driver, version 1.15.0.0 or higher

    ]]> Change to the downloaded directory and run the self-extracting executable for installation.]]> %SystemDrive%\hp\hpdiags setup.exe cp025808.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1318554046/v105449/cp025808.exe file://./hp/swpackages/cp025808.exe     changed HP Smart Storage Administrator (HP SSA) for Windows HP Smart Storage Administrator (HP SSA) for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows XP Professional Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows 7 (32-bit) - All Editions cp023901.exe Storage Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified) From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.

    ]]>         Contact HP.

    Users will automatically be logged out after a predetermined period of inactivity when using HP SSA and will have to re-login.


    On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HP SSA.


    When clicking on a controller that is currently being configured in a different HP SSA session, a message will appear which allows you to override the other HP SSA session or cancel. If you choose to override the other HP SSA session, any unsaved changes in the other session will be discarded.


    To uninstall HP SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.


    To run HP SSA in local application mode on Windows, Internet Explorer must be the default browser.


    The following are known issues:


    • Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.
    ]]>         %ProgramFiles%\hp\hpssa\bin cpqsetup.exe cp023901.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1264297872/v99521/cp023901.exe file://./hp/swpackages/cp023901.exe     changed HP Smart Storage Administrator (HP SSA) for Windows 64-bit HP Smart Storage Administrator (HP SSA) for Windows 64-bit Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Vista (64-bit) Microsoft Windows XP Professional x64 Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 cp023902.exe Storage Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified) From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.

    ]]>         For support for HP SSA or Smart Array controllers, please visit Contact HP.

    Users will automatically be logged out after a predetermined period of inactivity when using HP SSA and will have to re-login.

     

    On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HP SSA.

     

    When clicking on a controller that is currently being configured in a different HP SSA session, a message will appear which allows you to override the other HP SSA session or cancel. If you choose to override the other HP SSA session, any unsaved changes in the other session will be discarded.

     

    To uninstall HP SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.

     

    To run HP SSA in local application mode on Windows, Internet Explorer must be the default browser.

     

    The following are known issues:

     

    Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.

    ]]>         %ProgramFiles%\hp\hpssa\bin cpqsetup.exe cp023902.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1629173306/v99522/cp023902.exe file://./hp/swpackages/cp023902.exe     changed HP Smart Storage Administrator (HP SSA) CLI for Windows HP Smart Storage Administrator (HP SSA) CLI for Windows Hewlett-Packard Development Company, L.P. Microsoft Windows XP Professional Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) Microsoft Windows 7 (32-bit) - All Editions cp023903.exe Storage Server Software - System Management English (US) From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.

    When the installation is complete, click the Start button and navigate to Programs/HP System Tools/HP Smart Storage Administrator CLI.  This will run the CLI in a command prompt environment.

    ]]>
    • When using the CLI console, pressing the up arrow does not cycle through commands in Linux.

    • Using the * character outside the console does not work properly.

    • CLI commands are not editable when they wrap to the next line.
    • When using Linux as the host operating system, if a Smart Array controller has 16 or more volumes configured, deleting any volume in HP SSA will not update the /proc/partitions to reflect the deletion of the device node associated with that volume. Rebooting the server will cause the update to happen. Note that there is also a limitation that only the first 16 volumes configured will be available to the operating system.
    To enter the HP SSA CLI console type: hpssacli

    Commands can also be executed from outside the HP SSA CLI console using the syntax: hpssacli


    Type "hpssacli help" or type "help" at the CLI prompt for usage details.

    ]]>         %ProgramFiles%\hp\hpssacli\bin cpqsetup.exe cp023903.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1021616211/v99523/cp023903.exe file://./hp/swpackages/cp023903.exe     changed HP Smart Storage Administrator (HP SSA) CLI for Windows 64-bit HP Smart Storage Administrator (HP SSA) CLI for Windows 64-bit Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows Vista (64-bit) Microsoft Windows XP Professional x64 Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 cp023904.exe Storage Server Software - System Management English (US) From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation. The utility will automatically be installed.

    When the installation is complete, click the Start button and navigate to Programs/HP System Tools/HP Smart Storage Administrator CLI.  This will run the CLI in a command prompt environment.

    ]]>
    • When using the CLI console, pressing the up arrow does not cycle through commands in Linux.

    • Using the * character outside the console does not work properly.

    • CLI commands are not editable when they wrap to the next line.
    • When using Linux as the host operating system, if a Smart Array controller has 16 or more volumes configured, deleting any volume in HP SSA will not update the /proc/partitions to reflect the deletion of the device node associated with that volume. Rebooting the server will cause the update to happen. Note that there is also a limitation that only the first 16 volumes configured will be available to the operating system.
    To enter the HP SSA CLI console type: hpssacli

    Commands can also be executed from outside the HP SSA CLI console using the syntax: hpssacli


    Type "hpssacli help" or type "help" at the CLI prompt for usage details.

    ]]>         %ProgramFiles%\hp\hpssacli\bin cpqsetup.exe cp023904.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p2123253694/v99524/cp023904.exe file://./hp/swpackages/cp023904.exe     HP ProLiant DL980 System Providers for Windows Server x64 Editions HP ProLiant DL980 System Providers for Windows Server x64 Editions Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 cp024577.exe Server Software - System Management English (US), Japanese To install the system providers:

    1. Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
    2. From that drive and directory, execute the downloaded file to install the driver.
    3. Click the Install button to proceed with the installation.

    Note:  After the HP ProLiant DL980 System Providers for Windows Server x64 Editions version 9.3.0.1 or 9.3.0.2 has been installed on the system, HP Smart Update Manager (HP SUM) inventory reports the installed version as 9.3.0.0.  The discrepancy is due to the file %ProgramFiles%\MCWBEM\hpmcsysver.dll containing File Version 9.3.0.0 instead of 9.3.0.1 or 9.3.0.2.  Since there’s no functionality difference between version 9.3.0.0, version 9.3.0.1 and version 9.3.0.2, there should be no concern with the discrepancy reported by HP SUM.   Windows Control Panel "Programs and Features" reports the accurate version as 9.3.0.1 or 9.3.0.2.

     

    ]]>         %ProgramFiles%\MCWBEM cpqsetup.exe cp024577.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p618664347/v101286/cp024577.exe file://./hp/swpackages/cp024577.exe     changed ATI ES1000 Video Controller Driver for Windows Server 2008 ATI ES1000 Video Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 Microsoft Windows Vista (32-bit) cp011348.exe Server Driver - Video English (US)

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 1002 515E 103C 31FB 1002 5159 1002 5159 cpqsetup.exe cp011348.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1754148871/v55166/cp011348.exe file://./hp/swpackages/cp011348.exe changed ATI ES1000 Video Controller Driver for Windows Server 2008 x64 Editions ATI ES1000 Video Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Vista (64-bit) Microsoft Windows Storage Server 2008 x64 Editions cp011349.exe Server Driver - Video English (US)

    From that drive and directory, execute the downloaded file.]]> %systemroot%\system32\drivers 1002 515E 103C 31FB 1002 5159 1002 5159 cpqsetup.exe cp011349.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1021241828/v55167/cp011349.exe file://./hp/swpackages/cp011349.exe Matrox G200eH Video Controller Driver for Windows Server 2008 X86 Matrox G200eH Video Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 cp023659.exe Server Driver - Video English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 102B 0533 103C 330E 102B 0533 103C 3381 cpqsetup.exe cp023659.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1423733305/v98411/cp023659.exe file://./hp/swpackages/cp023659.exe     changed Matrox G200eH Video Controller Driver for Windows Server 2008 X64 Matrox G200eH Video Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 x64 Editions Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 cp023660.exe Server Driver - Video English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 102B 0533 103C 330E 102B 0533 103C 3381 cpqsetup.exe cp023660.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1905789206/v98412/cp023660.exe file://./hp/swpackages/cp023660.exe     changed Matrox G200eH Video Controller Driver for Windows Server 2012 and Server 2012 R2 Matrox G200eH Video Controller Driver Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp024752.exe Server Driver - Video English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         %systemroot%\system32\drivers 102B 0533 103C 330E 102B 0533 103C 3381 cpqsetup.exe cp024752.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows/p108232186/v101812/cp024752.exe file://./hp/swpackages/cp024752.exe     changed Online ROM Flash Component for Windows (x64) - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024969.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Online ROM Flash Component for Windows (x64) - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives

    Release Version and/or Date:
         HPDG

    Last Recommended or Critical Version:
         HPDG

    Previous Version of Firmware:
         HPDF

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDG (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DG0146FARVU DG0300FARVV DG0300BAMYR DG0146BAMYQ EG0300FAWJD EG0146FAWJC cpqsetup.exe cp024969.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1617498372/v102412/cp024969.exe file://./hp/swpackages/cp024969.exe     changed Online ROM Flash Component for Windows (x64) - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024970.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows (x64) - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives

    Release Version and/or Date:
          HPDJ

    Last Recommended or Critical Version:
          HPDJ

    Previous Version of Firmware:
          HPDH

    Firmware Dependency:
             None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDJ (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problem Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

      ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DH0146FAQRE DH0072FAQRD EH0146FAWJB EH0072FAWJA cpqsetup.exe cp024970.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p825320822/v102413/cp024970.exe file://./hp/swpackages/cp024970.exe     changed Online ROM Flash Component for Windows (x64) - EF0300FARMU, EF0450FARMV, EF0600FARNA drives EF0300FARMU, EF0450FARMV, EF0600FARNA drive Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024971.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows (x64) - EF0300FARMU, EF0450FARMV, EF0600FARNA drives

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
             None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FARNA EF0450FARMV EF0300FARMU cpqsetup.exe cp024971.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p248285168/v102414/cp024971.exe file://./hp/swpackages/cp024971.exe     changed Online ROM Flash Component for Windows (x64) - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024972.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives

    Release Version and/or Date:
         HPDB

    Last Recommended or Critical Version:
         HPDB

    Previous Version of Firmware:
         HPDA

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDB (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FATFF EF0450FATFE EF0300FATFD cpqsetup.exe cp024972.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p275558663/v102415/cp024972.exe file://./hp/swpackages/cp024972.exe     changed Online ROM Flash Component for Windows (x64) - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024973.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish
  • Minimum firmware required - HPD7.  HPDA drive firmware will fail when downgrading to versions below HPD7. 
    • ]]>         To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows (x64) - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives

    Release Version and/or Date:
         HPDA

    Last Recommended or Critical Version:
         HPDA

    Previous Version of Firmware:
         HPD9

    Firmware Dependency:

    • Minimum firmware required - HPD7. HPDA drive firmware will fail when downgrading to versions below HPD7.
    Enhancements/New Features:
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDA (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDBU EG0450FBDBT EG0300FBDBR cpqsetup.exe cp024973.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1409569311/v102416/cp024973.exe file://./hp/swpackages/cp024973.exe     changed Online ROM Flash Component for Windows (x64) - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024974.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
              None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDSR EG0450FBDSQ EG0300FBDSP cpqsetup.exe cp024974.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p12396357/v102417/cp024974.exe file://./hp/swpackages/cp024974.exe     changed Online ROM Flash Component for Windows (x64) - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024975.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows (x64) - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD7 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBLSK EG0600FBLSH EG0450FBLSF EG0300FBLSE cpqsetup.exe cp024975.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p917459452/v102418/cp024975.exe file://./hp/swpackages/cp024975.exe     changed Online ROM Flash Component for Windows (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024976.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives

    Release Version and/or Date:
          HPDC

    Last Recommended or Critical Version:
          HPDC

    Previous Version of Firmware:
          HPD9

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDC (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems fixed:

    • Addressed an issue with an HP Smart Array E200 controller which could fail to discover a drive when more than one identify frame was provided during discovery.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBVFQ EG0300FBVFL EG0600FBVFP EG0450FBVFM cpqsetup.exe cp024976.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1272227878/v102419/cp024976.exe file://./hp/swpackages/cp024976.exe     changed Online ROM Flash Component for Windows (x64) - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024977.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD5 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FCVBL EG0600FCVBK EG0450FCVBH EG0300FCVBF cpqsetup.exe cp024977.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1410515568/v102420/cp024977.exe file://./hp/swpackages/cp024977.exe     changed Online ROM Flash Component for Windows (x64) - EG1200FCVBQ Drives EG1200FCVBQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024302.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EG1200FCVBQ Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS EG1200FCVBQ cpqsetup.exe cp024302.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1795010975/v100636/cp024302.exe file://./hp/swpackages/cp024302.exe     changed Online ROM Flash Component for Windows (x64) - EH0072FARUA and EH0146FARUB drives EH0072FARUA and EH0146FARUB drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024979.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EH0072FARUA and EH0146FARUB drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None 

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD9 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up.  This firmware improves signal quality between the drive and the controller.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARUB EH0072FARUA cpqsetup.exe cp024979.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1982234814/v102422/cp024979.exe file://./hp/swpackages/cp024979.exe     changed Online ROM Flash Component for Windows (x64) - EH0072FARWC and EH0146FARWD Drives EH0072FARWC, EH0146FARWD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024980.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows (x64) - EH0072FARWC and EH0146FARWD Drives

    Release Version and/or Date:
         HPDD

    Last Recommended or Critical Version:
         HPDD

    Previous Version of Firmware:
         HPDC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDD (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

      ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARWD EH0072FARWC cpqsetup.exe cp024980.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p956392346/v102423/cp024980.exe file://./hp/swpackages/cp024980.exe     changed Online ROM Flash Component for Windows (x64) - EH0146FBQDC and EH0300FBQDD drives EH0146FBQDC and EH0300FBQDD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024981.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows (x64) - EH0146FBQDC and EH0300FBQDD drives

    Release Version and/or Date:
         HPD3

    Last Recommended or Critical Version:
         HPD3

    Previous Version of Firmware:
         HPD1

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD3 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD3 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.      

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0300FBQDD EH0146FBQDC cpqsetup.exe cp024981.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1482163560/v102424/cp024981.exe file://./hp/swpackages/cp024981.exe     changed Online ROM Flash Component for Windows (x64) - EH0146FCBVB and EH0300FCBVC drives EH0146FCBVB and EH0300FCBVC drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024982.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows (x64) - EH0146FCBVB and EH0300FCBVC drives

    Release Version and/or Date:
         HPD4

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware revision reduces the possibility of Uncorrectable Read Errors due to poor writes to the media.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD4 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:
         None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FCBVB EH0300FCBVC cpqsetup.exe cp024982.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1441023367/v102425/cp024982.exe file://./hp/swpackages/cp024982.exe     changed Online ROM Flash Component for Windows (x64) - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024983.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD9

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD9 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • In previous firmware revisions when the solid state drive was issued a Report Support Operation Code (RSOC) command (A3h) and the reporting options field was set to 001 , the drive incorrectly responded with 05/24/00 indicating that the RSOC command was not supported. The error was logged in the system log files. The drive should have communicated non-support using the Command Data Parameter (CDP) format. The firmware now complies with the RSOC industry standard specification.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MO0400FBRWC EO0400FBRWA EO0200FBRVV MO0800FBRWD MO0200FBRWB cpqsetup.exe cp024983.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1048416716/v102426/cp024983.exe file://./hp/swpackages/cp024983.exe     Online ROM Flash Component for Windows (x64) - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023278.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows  (x64) - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:    
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000GCEHK MB1000GCEHH MB0500GCEHF cpqsetup.exe cp023278.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1815530925/v97066/cp023278.exe file://./hp/swpackages/cp023278.exe     Online ROM Flash Component for Windows (x64) - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023279.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows (x64) - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives

    Release Version and/or Date:
              HPG3

    Last Recommended or Critical Version:
              HPG3

    Previous Version of Firmware:
          HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

         •       Frequency of Background Media Scans changed to reduce drive workload.
         •       Improvement to allow drives to better handle sudden shock occurrences.
         •       New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
     
    Problems Fixed:

         •       A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000ECWCU MB3000ECWCT MB2000ECWCR MB1000ECWCQ cpqsetup.exe cp023279.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1180621061/v97067/cp023279.exe file://./hp/swpackages/cp023279.exe     changed Online ROM Flash Component for Windows (x64) - MB1000FAMYU and MB2000FAMYV Drives MB1000FAMYU and MB2000FAMYV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024984.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB1000FAMYU and MB2000FAMYV Drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:  
         None   

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD7 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FAMYV MB1000FAMYU cpqsetup.exe cp024984.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1640135780/v102427/cp024984.exe file://./hp/swpackages/cp024984.exe     changed Online ROM Flash Component for Windows (x64) - MB1000FBZPL and MB2000FBZPN drives MB1000FBZPL and MB2000FBZPN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024985.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows (x64) - MB1000FBZPL and MB2000FBZPN drives

    Release Version and/or Date:
         HPD3

    Last Recommended or Critical Version:
         HPD3

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD3 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.

     Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FBZPN MB1000FBZPL cpqsetup.exe cp024985.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1171589962/v102428/cp024985.exe file://./hp/swpackages/cp024985.exe     changed Online ROM Flash Component for Windows (x64) - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024986.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows (x64) - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD5 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCWDK MB3000FCWDH MB2000FCWDF MB1000FCWDE cpqsetup.exe cp024986.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1586191067/v102429/cp024986.exe file://./hp/swpackages/cp024986.exe     changed Online ROM Flash Component for Windows (x64) - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024987.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives

    Release Version and/or Date:
          HPD2

    Last Recommended or Critical Version:
          HPD2

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • This firmware improves reliability by modifying the pivot bearing grease wear leveling algorithm, which if not implemented, could result in an increased drive failure rate for specific usage applications (eg, very long periods of small range seeks). 
    • Enhancements also include performance improvements.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD2 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems fixed:
         None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCVCB MB3000FCVCA MB2000FCVBV MB1000FCWPP cpqsetup.exe cp024987.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1461868656/v102430/cp024987.exe file://./hp/swpackages/cp024987.exe     Online ROM Flash Component for Windows (x64) - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023284.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows (x64) - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

         •       Frequency of Background Media Scans changed to reduce drive workload.
         •       Improvement to allow drives to better handle sudden shock occurrences.
         •       New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
     
    Problems Fixed:

         •       A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000GCWDC MB3000GCWDB MB2000GCWDA MB1000GCWCV cpqsetup.exe cp023284.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1078317893/v97072/cp023284.exe file://./hp/swpackages/cp023284.exe     Online ROM Flash Component for Windows (x64) - MB2000EAZNL Drives MB2000EAZNL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023285.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB2000EAZNL drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware contains general maintenance release and code improvement items. Drives built with or upgraded to hard drive firmware version HPG4 should not be downgraded to an earlier version of firmware due to hard drive manufacturing process changes.

    Known Issues:
         None

    ]]>         firmware:SATA MB2000EAZNL cpqsetup.exe cp023285.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p115071578/v97073/cp023285.exe file://./hp/swpackages/cp023285.exe     Online ROM Flash Component for Windows (x64) - MB2000EBUCF and MB3000EBUCH Drives MB2000EBUCF and MB3000EBUCH Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023286.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB2000EBUCF and MB3000EBUCH Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000EBUCH MB2000EBUCF cpqsetup.exe cp023286.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p57635886/v97074/cp023286.exe file://./hp/swpackages/cp023286.exe     Online ROM Flash Component for Windows (x64) - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023287.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows (x64) - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000ECVJF MB3000ECVJH MB4000ECVJK cpqsetup.exe cp023287.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p582837371/v97075/cp023287.exe file://./hp/swpackages/cp023287.exe     changed Online ROM Flash Component for Windows (x64) - MB2000FBUCL and MB3000FBUCN drives MB2000FBUCL and MB3000FBUCN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024988.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB2000FBUCL and MB3000FBUCN drives

    Release Version and/or Date:
          HPDA

    Last Recommended or Critical Version:
          HPDA

    Previous Version of Firmware:
          HPD7

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDA (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBUCN MB2000FBUCL cpqsetup.exe cp024988.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p865296931/v102431/cp024988.exe file://./hp/swpackages/cp024988.exe     Online ROM Flash Component for Windows (x64) - MB2000GBUPB and MB3000GBUCK Drives MB2000GBUPB and MB3000GBUCK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023289.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB2000GBUPB and MB3000GBUCK Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBUCK MB2000GBUPB cpqsetup.exe cp023289.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1372467883/v97077/cp023289.exe file://./hp/swpackages/cp023289.exe     Online ROM Flash Component for Windows (x64) - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023290.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows (x64) - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000GCVBU MB3000GCVBT MB2000GCVBR cpqsetup.exe cp023290.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1761504496/v97078/cp023290.exe file://./hp/swpackages/cp023290.exe     Online ROM Flash Component for Windows (x64) - MB3000EBKAB Drives MB3000EBKAB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023291.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows (x64) - MB3000EBKAB

    Release Version and/or Date:
       HPG6

    Last Recommended or Critical Version:
        HPG6

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPG6 prevents this condition from occurring.
    • This firmware corrects “command timeouts” and seek errors which can result in poor performance or a Device Fault condition, the latter of which will result in the drive failed by the Controller or sub system.

    Known Issues:
         None

    ]]>         firmware:SATA MB3000EBKAB cpqsetup.exe cp023291.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1976022949/v97079/cp023291.exe file://./hp/swpackages/cp023291.exe     changed Online ROM Flash Component for Windows (x64) - MB2000FCQPF and MB3000FBNWV Drives MB2000FCQPF and MB3000FBNWV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024303.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MB2000FCQPF and MB3000FBNWV Drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
         HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware provides performance improvements for large transfer sequential write burst workloads.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD7 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a condition in which data failed to be written to media after the host issued a hard reset in a lab stress test environment with write cache enabled.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBNWV MB2000FCQPF cpqsetup.exe cp024303.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1177091107/v100637/cp024303.exe file://./hp/swpackages/cp024303.exe     Online ROM Flash Component for Windows (x64) - MB2000GCQXQ and MB3000GBKAC Drives MB2000GCQXQ and MB3000GBKAC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023293.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows (x64) - MB2000GCQXQ and MB3000GBKAC Drives

    Release Version and/or Date:
        HPGJ

    Last Recommended or Critical Version:
        HPGJ

    Previous Version of Firmware:
        HPGF

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGJ prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBKAC MB2000GCQXQ cpqsetup.exe cp023293.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p758594862/v97081/cp023293.exe file://./hp/swpackages/cp023293.exe     changed Online ROM Flash Component for Windows (x64) - MM0500FAMYT Drives MM0500FAMYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024989.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MM0500FAMYT drive

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:   
         None  

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD6 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS MM0500FAMYT cpqsetup.exe cp024989.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1852685452/v102432/cp024989.exe file://./hp/swpackages/cp024989.exe     changed Online ROM Flash Component for Windows (x64) - MM0500FBFVQ and MM1000FBFVR Drives MM0500FBFVQ and MM1000FBFVR Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp024990.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MM0500FBFVQ and MM1000FBFVR drives

    Release Version and/or Date:
          HPD8

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD8 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD8 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MM1000FBFVR MM0500FBFVQ cpqsetup.exe cp024990.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p728788209/v102433/cp024990.exe file://./hp/swpackages/cp024990.exe     Online ROM Flash Component for Windows (x64) - MM0500GBKAK and MM1000GBKAL Drives MM0500GBKAK and MM1000GBKAL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023296.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MM0500GBKAK and MM1000GBKAL Drives

    Release Version and/or Date:
          HPGC

    Last Recommended or Critical Version:
          HPGC

    Previous Version of Firmware:
          HPGB

    Firmware Dependency:    
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGC prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MM1000GBKAL MM0500GBKAK cpqsetup.exe cp023296.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p506332183/v97084/cp023296.exe file://./hp/swpackages/cp023296.exe     changed Online ROM Flash Component for Windows (x64) - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp026330.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows (x64) - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives
     
    Release Version and/or Date:
              HPD3

    Last Recommended or Critical Version:
              HPD3

    Previous Version of Firmware:
              HPD2

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD3 (C): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This maintenance firmware fixes a rare occurrence where the drive would stop communicating with the HOST while recovering from an internal reset.  Due to the device being non-responsive the device was marked as failed by the controller. 

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MO0800FCTRQ MO0400FCTRP MO0200FCTRN cpqsetup.exe cp026330.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1491929463/v107020/cp026330.exe file://./hp/swpackages/cp026330.exe     Online ROM Flash Component for Windows (x64) - VB0160EAVEQ and VB0160CBCDE Drives VB0160EAVEQ and VB0160CBCDE Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023298.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows (x64) - VB0160EAVEQ and VB0160CBCDE Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA VB0160EAVEQ VB0160CBCDE cpqsetup.exe cp023298.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1220339212/v97086/cp023298.exe file://./hp/swpackages/cp023298.exe     Online ROM Flash Component for Windows (x64) - VB0250EAVER Drives VB0250EAVER Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023299.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows (x64) - VB0250EAVER Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA VB0250EAVER cpqsetup.exe cp023299.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p399117283/v97087/cp023299.exe file://./hp/swpackages/cp023299.exe     Online ROM Flash Component for Windows (x64) - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 cp023311.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         NA

    Previous Version of Firmware:
              NA

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This maintenance release corrects a failure seen during a HP Insight Diagnostic hard drive test. The failure was due to Device Extended Self-Test not completing in the drives advertised Self-Test completion time. This failure is not an indication that the drive is bad or marginal.
     Known Issues:
         None
    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MK0100GCTYU MK0200GCTYV MK0400GCTZA MK0800GCTZB cpqsetup.exe cp023311.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1016739789/v97121/cp023311.exe file://./hp/swpackages/cp023311.exe     Online ROM Flash Component for Windows - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020424.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Online ROM Flash Component for Windows - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives

    Release Version and/or Date:
         HPDG

    Last Recommended or Critical Version:
         HPDG

    Previous Version of Firmware:
         HPDF

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS DG0146FARVU DG0300FARVV DG0300BAMYR DG0146BAMYQ EG0300FAWJD EG0146FAWJC cpqsetup.exe cp020424.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p935940086/v87444/cp020424.exe file://./hp/swpackages/cp020424.exe     Online ROM Flash Component for Windows - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020430.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives

    Release Version and/or Date:
          HPDJ

    Last Recommended or Critical Version:
          HPDJ

    Previous Version of Firmware:
          HPDH

    Firmware Dependency:
             None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    Problem Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS DH0146FAQRE DH0072FAQRD EH0146FAWJB EH0072FAWJA cpqsetup.exe cp020430.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p19941356/v87450/cp020430.exe file://./hp/swpackages/cp020430.exe     Online ROM Flash Component for Windows - EF0300FARMU, EF0450FARMV, EF0600FARNA drives EF0300FARMU, EF0450FARMV, EF0600FARNA drive Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020432.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows - EF0300FARMU, EF0450FARMV, EF0600FARNA drives

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
             None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EF0600FARNA EF0450FARMV EF0300FARMU cpqsetup.exe cp020432.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p260781160/v87452/cp020432.exe file://./hp/swpackages/cp020432.exe     Online ROM Flash Component for Windows - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020433.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives

    Release Version and/or Date:
         HPDB

    Last Recommended or Critical Version:
         HPDB

    Previous Version of Firmware:
         HPDA

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EF0600FATFF EF0450FATFE EF0300FATFD cpqsetup.exe cp020433.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p2122822894/v87453/cp020433.exe file://./hp/swpackages/cp020433.exe     Online ROM Flash Component for Windows - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020307.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish
  • Minimum firmware required - HPD7.  HPDA drive firmware will fail when downgrading to versions below HPD7. 
    • ]]>         To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives

    Release Version and/or Date:
         HPDA

    Last Recommended or Critical Version:
         HPDA

    Previous Version of Firmware:
         HPD9

    Firmware Dependency:

    • Minimum firmware required - HPD7. HPDA drive firmware will fail when downgrading to versions below HPD7.

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EG0600FBDBU EG0450FBDBT EG0300FBDBR cpqsetup.exe cp020307.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1351944197/v87100/cp020307.exe file://./hp/swpackages/cp020307.exe     Online ROM Flash Component for Windows - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020435.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
              None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EG0600FBDSR EG0450FBDSQ EG0300FBDSP cpqsetup.exe cp020435.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1523164783/v87455/cp020435.exe file://./hp/swpackages/cp020435.exe     Online ROM Flash Component for Windows - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020436.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FBLSK EG0600FBLSH EG0450FBLSF EG0300FBLSE cpqsetup.exe cp020436.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1961859015/v87456/cp020436.exe file://./hp/swpackages/cp020436.exe     Online ROM Flash Component for Windows - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022185.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:
             None

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FCVBL EG0600FCVBK EG0450FCVBH EG0300FCVBF cpqsetup.exe cp022185.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1138636260/v93301/cp022185.exe file://./hp/swpackages/cp022185.exe     Online ROM Flash Component for Windows - EG1200FCVBQ Drives EG1200FCVBQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 64-Bit Edition (Itanium) Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp021952.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG1200FCVBQ Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
         None

    Enhancements/New Features:
             None

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:SAS EG1200FCVBQ cpqsetup.exe cp021952.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p177429249/v92357/cp021952.exe file://./hp/swpackages/cp021952.exe     Online ROM Flash Component for Windows - EH0072FARUA and EH0146FARUB drives EH0072FARUA and EH0146FARUB drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020437.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EH0072FARUA and EH0146FARUB drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None 

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.
    Problems Fixed:
    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up.  This firmware improves signal quality between the drive and the controller.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0146FARUB EH0072FARUA cpqsetup.exe cp020437.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p665193470/v87457/cp020437.exe file://./hp/swpackages/cp020437.exe     Online ROM Flash Component for Windows - EH0072FARWC and EH0146FARWD Drives EH0072FARWC, EH0146FARWD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020438.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows - EH0072FARWC and EH0146FARWD Drives

    Release Version and/or Date:
         HPDD

    Last Recommended or Critical Version:
         HPDD

    Previous Version of Firmware:
         HPDC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

     
    ]]>         firmware:SAS firmware:SAS EH0146FARWD EH0072FARWC cpqsetup.exe cp020438.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p712681053/v87458/cp020438.exe file://./hp/swpackages/cp020438.exe     Online ROM Flash Component for Windows - EH0146FBQDC and EH0300FBQDD drives EH0146FBQDC and EH0300FBQDD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020439.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows - EH0146FBQDC and EH0300FBQDD drives

    Release Version and/or Date:
         HPD3

    Last Recommended or Critical Version:
         HPD3

    Previous Version of Firmware:
         HPD1

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD3 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.      

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0300FBQDD EH0146FBQDC cpqsetup.exe cp020439.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p392263181/v87459/cp020439.exe file://./hp/swpackages/cp020439.exe     Online ROM Flash Component for Windows - EH0146FCBVB and EH0300FCBVC drives EH0146FCBVB and EH0300FCBVC drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020536.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows - EH0146FCBVB and EH0300FCBVC drives

    Release Version and/or Date:
         HPD4

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware revision reduces the possibility of Uncorrectable Read Errors due to poor writes to the media.

    Problems Fixed:
         None

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0146FCBVB EH0300FCBVC cpqsetup.exe cp020536.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1003405268/v87663/cp020536.exe file://./hp/swpackages/cp020536.exe     Online ROM Flash Component for Windows - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020440.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD9

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • In previous firmware revisions when the solid state drive was issued a Report Support Operation Code (RSOC) command (A3h) and the reporting options field was set to 001 , the drive incorrectly responded with 05/24/00 indicating that the RSOC command was not supported. The error was logged in the system log files. The drive should have communicated non-support using the Command Data Parameter (CDP) format. The firmware now complies with the RSOC industry standard specification.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS MO0400FBRWC EO0400FBRWA EO0200FBRVV MO0800FBRWD MO0200FBRWB cpqsetup.exe cp020440.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1337012013/v87460/cp020440.exe file://./hp/swpackages/cp020440.exe     Online ROM Flash Component for Windows - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020453.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:    
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000GCEHK MB1000GCEHH MB0500GCEHF cpqsetup.exe cp020453.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p808312263/v87473/cp020453.exe file://./hp/swpackages/cp020453.exe     Online ROM Flash Component for Windows - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp021887.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives

    Release Version and/or Date:
              HPG3

    Last Recommended or Critical Version:
              HPG3

    Previous Version of Firmware:
          HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

         •       Frequency of Background Media Scans changed to reduce drive workload.
         •       Improvement to allow drives to better handle sudden shock occurrences.
         •       New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
     
    Problems Fixed:

         •       A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000ECWCU MB3000ECWCT MB2000ECWCR MB1000ECWCQ cpqsetup.exe cp021887.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1230596722/v91968/cp021887.exe file://./hp/swpackages/cp021887.exe     Online ROM Flash Component for Windows - MB1000FAMYU and MB2000FAMYV Drives MB1000FAMYU and MB2000FAMYV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020455.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB1000FAMYU and MB2000FAMYV Drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:  
         None   

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB2000FAMYV MB1000FAMYU cpqsetup.exe cp020455.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p645151501/v87475/cp020455.exe file://./hp/swpackages/cp020455.exe     Online ROM Flash Component for Windows - MB1000FBZPL and MB2000FBZPN drives MB1000FBZPL and MB2000FBZPN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020456.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
        Online ROM Flash Component for Windows - MB1000FBZPL and MB2000FBZPN drives

    Release Version and/or Date:
         HPD3

    Last Recommended or Critical Version:
         HPD3

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:
    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.

     Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB2000FBZPN MB1000FBZPL cpqsetup.exe cp020456.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1511808302/v87476/cp020456.exe file://./hp/swpackages/cp020456.exe     Online ROM Flash Component for Windows - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022188.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
           Online ROM Flash Component for Windows - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS MB4000FCWDK MB3000FCWDH MB2000FCWDF MB1000FCWDE cpqsetup.exe cp022188.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1296131255/v93305/cp022188.exe file://./hp/swpackages/cp022188.exe     Online ROM Flash Component for Windows - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022639.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives

    Release Version and/or Date:
          HPD2

    Last Recommended or Critical Version:
          HPD2

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • This firmware improves reliability by modifying the pivot bearing grease wear leveling algorithm, which if not implemented, could result in an increased drive failure rate for specific usage applications (eg, very long periods of small range seeks). 
    • Enhancements also include performance improvements.

    Problems fixed:
         None

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS MB4000FCVCB MB3000FCVCA MB2000FCVBV MB1000FCWPP cpqsetup.exe cp022639.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1642996435/v94983/cp022639.exe file://./hp/swpackages/cp022639.exe     Online ROM Flash Component for Windows - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition cp021776.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

         •       Frequency of Background Media Scans changed to reduce drive workload.
         •       Improvement to allow drives to better handle sudden shock occurrences.
         •       New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
     
    Problems Fixed:

         •       A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000GCWDC MB3000GCWDB MB2000GCWDA MB1000GCWCV cpqsetup.exe cp021776.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1437780490/v91487/cp021776.exe file://./hp/swpackages/cp021776.exe     Online ROM Flash Component for Windows - MB2000EAZNL Drives MB2000EAZNL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Itanium Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020390.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB2000EAZNL drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware contains general maintenance release and code improvement items. Drives built with or upgraded to hard drive firmware version HPG4 should not be downgraded to an earlier version of firmware due to hard drive manufacturing process changes.

    Known Issues:
         None

    ]]>         firmware:SATA MB2000EAZNL cpqsetup.exe cp020390.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p993175581/v87369/cp020390.exe file://./hp/swpackages/cp020390.exe     Online ROM Flash Component for Windows - MB2000EBUCF and MB3000EBUCH Drives MB2000EBUCF and MB3000EBUCH Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020667.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB2000EBUCF and MB3000EBUCH Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000EBUCH MB2000EBUCF cpqsetup.exe cp020667.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p966162993/v88113/cp020667.exe file://./hp/swpackages/cp020667.exe     Online ROM Flash Component for Windows - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022641.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000ECVJF MB3000ECVJH MB4000ECVJK cpqsetup.exe cp022641.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1340329394/v94986/cp022641.exe file://./hp/swpackages/cp022641.exe     Online ROM Flash Component for Windows - MB2000FBUCL and MB3000FBUCN drives MB2000FBUCL and MB3000FBUCN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp021545.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB2000FBUCL and MB3000FBUCN drives

    Release Version and/or Date:
          HPDA

    Last Recommended or Critical Version:
          HPDA

    Previous Version of Firmware:
          HPD7

    Firmware Dependency:  
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB3000FBUCN MB2000FBUCL cpqsetup.exe cp021545.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1671401853/v90610/cp021545.exe file://./hp/swpackages/cp021545.exe     Online ROM Flash Component for Windows - MB2000GBUPB and MB3000GBUCK Drives MB2000GBUPB and MB3000GBUCK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020664.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB2000GBUPB and MB3000GBUCK Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBUCK MB2000GBUPB cpqsetup.exe cp020664.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p916069747/v88110/cp020664.exe file://./hp/swpackages/cp020664.exe     Online ROM Flash Component for Windows - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022644.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000GCVBU MB3000GCVBT MB2000GCVBR cpqsetup.exe cp022644.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p357094070/v94990/cp022644.exe file://./hp/swpackages/cp022644.exe     Online ROM Flash Component for Windows - MB3000EBKAB Drives MB3000EBKAB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020461.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows - MB3000EBKAB

    Release Version and/or Date:
       HPG6

    Last Recommended or Critical Version:
        HPG6

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPG6 prevents this condition from occurring.
    • This firmware corrects “command timeouts” and seek errors which can result in poor performance or a Device Fault condition, the latter of which will result in the drive failed by the Controller or sub system.

    Known Issues:
         None

    ]]>         firmware:SATA MB3000EBKAB cpqsetup.exe cp020461.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1581325775/v87481/cp020461.exe file://./hp/swpackages/cp020461.exe     Online ROM Flash Component for Windows - MB2000FCQPF and MB3000FBNWV Drives MB2000FCQPF and MB3000FBNWV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp021563.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MB2000FCQPF and MB3000FBNWV Drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
         HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware provides performance improvements for large transfer sequential write burst workloads.

    Problems Fixed:

    • This firmware prevents a condition in which data failed to be written to media after the host issued a hard reset in a lab stress test environment with write cache enabled.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB3000FBNWV MB2000FCQPF cpqsetup.exe cp021563.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1100351777/v90689/cp021563.exe file://./hp/swpackages/cp021563.exe     Online ROM Flash Component for Windows - MB2000GCQXQ and MB3000GBKAC Drives MB2000GCQXQ and MB3000GBKAC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020463.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MB2000GCQXQ and MB3000GBKAC Drives

    Release Version and/or Date:
        HPGJ

    Last Recommended or Critical Version:
        HPGJ

    Previous Version of Firmware:
        HPGF

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGJ prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBKAC MB2000GCQXQ cpqsetup.exe cp020463.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1015716711/v87483/cp020463.exe file://./hp/swpackages/cp020463.exe     Online ROM Flash Component for Windows - MM0500FAMYT Drives MM0500FAMYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020466.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MM0500FAMYT drive

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:   
         None  

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD6 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:SAS MM0500FAMYT cpqsetup.exe cp020466.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p522786557/v87486/cp020466.exe file://./hp/swpackages/cp020466.exe     Online ROM Flash Component for Windows - MM0500FBFVQ and MM1000FBFVR Drives MM0500FBFVQ and MM1000FBFVR Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020467.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MM0500FBFVQ and MM1000FBFVR drives

    Release Version and/or Date:
          HPD8

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD8 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MM1000FBFVR MM0500FBFVQ cpqsetup.exe cp020467.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p770957454/v87487/cp020467.exe file://./hp/swpackages/cp020467.exe     Online ROM Flash Component for Windows - MM0500GBKAK and MM1000GBKAL Drives MM0500GBKAK and MM1000GBKAL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020468.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MM0500GBKAK and MM1000GBKAL Drives

    Release Version and/or Date:
          HPGC

    Last Recommended or Critical Version:
          HPGC

    Previous Version of Firmware:
          HPGB

    Firmware Dependency:    
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGC prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MM1000GBKAL MM0500GBKAK cpqsetup.exe cp020468.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p78902977/v87488/cp020468.exe file://./hp/swpackages/cp020468.exe     Online ROM Flash Component for Windows - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022801.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives
     
    Release Version and/or Date:
              HPD3

    Last Recommended or Critical Version:
              HPD3

    Previous Version of Firmware:
              HPD2

    Firmware Dependency:
             None

    Enhancements/New Features:
             None

    Problems Fixed:

    • This maintenance firmware fixes a rare occurrence where the drive would stop communicating with the HOST while recovering from an internal reset.  Due to the device being non-responsive the device was marked as failed by the controller. 

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS firmware:SAS MO0800FCTRQ MO0400FCTRP MO0200FCTRN cpqsetup.exe cp022801.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p2060440236/v95483/cp022801.exe file://./hp/swpackages/cp022801.exe     Online ROM Flash Component for Windows - VB0160EAVEQ and VB0160CBCDE Drives VB0160EAVEQ and VB0160CBCDE Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020477.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows - VB0160EAVEQ and VB0160CBCDE Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA VB0160EAVEQ VB0160CBCDE cpqsetup.exe cp020477.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p933824847/v87497/cp020477.exe file://./hp/swpackages/cp020477.exe     Online ROM Flash Component for Windows - VB0250EAVER Drives VB0250EAVER Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials cp020478.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
      Online ROM Flash Component for Windows - VB0250EAVER Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA VB0250EAVER cpqsetup.exe cp020478.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p113362971/v87498/cp020478.exe file://./hp/swpackages/cp020478.exe     Online ROM Flash Component for Windows - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022699.exe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Online ROM Flash Component for Windows - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         NA

    Previous Version of Firmware:
              NA

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • This maintenance release corrects a failure seen during a HP Insight Diagnostic hard drive test. The failure was due to Device Extended Self-Test not completing in the drives advertised Self-Test completion time. This failure is not an indication that the drive is bad or marginal.
     Known Issues:
         None
    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MK0100GCTYU MK0200GCTYV MK0400GCTZA MK0800GCTZB cpqsetup.exe cp022699.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1828073135/v95128/cp022699.exe file://./hp/swpackages/cp022699.exe     Online ROM Flash Component for Windows - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp022570.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives

    Release Version and/or Date:
          HPDC

    Last Recommended or Critical Version:
          HPDC

    Previous Version of Firmware:
          HPD9

    Firmware Dependency:  
         None

    Enhancements/New Features:
         None

    Problems fixed:

    • Addressed an issue with an HP Smart Array E200 controller which could fail to discover a drive when more than one identify frame was provided during discovery.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FBVFQ EG0300FBVFL EG0600FBVFP EG0450FBVFM cpqsetup.exe cp022570.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p219699640/v94744/cp022570.exe file://./hp/swpackages/cp022570.exe     Online ROM Flash Component for Windows - EG0900FDJYR and EG1200FDJYT Drives EG0900FDJYR and EG1200FDJYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 cp023452.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG0900FDJYR and EG1200FDJYT Drives

    Release Version and/or Date:
          HPD1

    Last Recommended or Critical Version:
          HPD1

    Previous Version of Firmware:
          HPD0

    Firmware Dependency:    
         None 

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EG1200FDJYT EG0900FDJYR cpqsetup.exe cp023452.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1213032730/v97795/cp023452.exe file://./hp/swpackages/cp023452.exe     changed Online ROM Flash Component for Windows - EG0900FDJYR and EG1200FDJYT Drives EG0900FDJYR and EG1200FDJYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 cp024978.exe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Windows operating system on target server:
    • Place the Smart Component in a temporary directory.
    • Double-click on the Smart Component.
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant :
    • Place the desired firmware to be updated in the directory, \SPP20xxxxx\hp\swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Online ROM Flash Component for Windows - EG0900FDJYR and EG1200FDJYT Drives

    Release Version and/or Date:
          HPD1

    Last Recommended or Critical Version:
          HPD1

    Previous Version of Firmware:
          HPD0

    Firmware Dependency:    
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD1 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EG1200FDJYT EG0900FDJYR cpqsetup.exe cp024978.exe http://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-drive/p1673227641/v102421/cp024978.exe file://./hp/swpackages/cp024978.exe     changed HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) kmod-cciss-4.6.28-24.rhel6.i686.rpm Storage Server Driver - Storage Controller English (US) 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh kmod-cciss-<version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh kmod-cciss-4.6.28-20.rhel6u1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-cciss-<version>.<OSupdate>.i586.rpm
     
    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         0E11 B178 0E11 4080 103C 3220 103C 3225 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409D 0E11 0046 0E11 4091 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3237 103C 3230 103C 323D 0E11 B178 0E11 4083 0E11 B060 0E11 4070 0E11 B178 0E11 4082 0E11 B060 0E11 4070 103C 3230 103C 3223 software:rpm software:rpm software:rpm software:rpm software:rpm kmod-cciss-4.6.28-24.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556982193/v105821/kmod-cciss-4.6.28-24.rhel6u1.i686.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u1.i686.rpm kmod-cciss-4.6.28-24.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556982193/v105821/kmod-cciss-4.6.28-24.rhel6u3.i686.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u3.i686.rpm kmod-cciss-4.6.28-24.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556982193/v105821/kmod-cciss-4.6.28-24.rhel6u2.i686.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u2.i686.rpm kmod-cciss-4.6.28-24.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556982193/v105821/kmod-cciss-4.6.28-24.rhel6u5.i686.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u5.i686.rpm kmod-cciss-4.6.28-24.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556982193/v105821/kmod-cciss-4.6.28-24.rhel6u4.i686.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u4.i686.rpm     changed HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-cciss-4.6.28-24.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh kmod-cciss-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-cciss-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-cciss-<version>.<OSupdate>.x86_64.rpm

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         0E11 B178 0E11 4080 103C 3220 103C 3225 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409D 0E11 0046 0E11 4091 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3237 103C 3230 103C 323D 0E11 B178 0E11 4082 0E11 B178 0E11 4083 0E11 B060 0E11 4070 0E11 B060 0E11 4070 103C 3230 103C 3223 software:rpm software:rpm software:rpm software:rpm software:rpm kmod-cciss-4.6.28-24.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1455520973/v105822/kmod-cciss-4.6.28-24.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u4.x86_64.rpm kmod-cciss-4.6.28-24.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1455520973/v105822/kmod-cciss-4.6.28-24.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u5.x86_64.rpm kmod-cciss-4.6.28-24.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1455520973/v105822/kmod-cciss-4.6.28-24.rhel6u1.x86_64.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u1.x86_64.rpm kmod-cciss-4.6.28-24.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1455520973/v105822/kmod-cciss-4.6.28-24.rhel6u2.x86_64.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u2.x86_64.rpm kmod-cciss-4.6.28-24.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1455520973/v105822/kmod-cciss-4.6.28-24.rhel6u3.x86_64.rpm file://./hp/swpackages/kmod-cciss-4.6.28-24.rhel6u3.x86_64.rpm     changed HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (x86) HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (x86) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) kmod-hpahcisr-1.2.6-17.rhel6.i686.rpm Storage Server Driver - Storage Controller English (US) INSTALLATION

    Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. 

    To install or upgrade the driver type:

          # rpm -Uvh kmod-hpahcisr-<version>.<OSupdate>.i686.rpm

    Setup is now complete. REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

          # rpm -e kmod-hpahcisr-<version>.<OSupdate>.i686.rpm

    NOTE: Since the hpahcisr does not ship with the Operating System, the removal of the hpahcisr rpm will leave your system without an hpahcisr driver to handle disk storage.  It is important that you reinstall the previous working hpahcisr rpm before you reboot or your system will fail.

     

    ]]>         8086 3A25 103C 3118 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpahcisr-1.2.6-18.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u1.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u1.i686.rpm kmod-hpahcisr-1.2.6-18.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u2.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u2.i686.rpm kmod-hpahcisr-1.2.6-18.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u3.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u3.i686.rpm kmod-hpahcisr-1.2.6-18.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u4.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u4.i686.rpm kmod-hpahcisr-1.2.6-18.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u5.i686.rpm kmod-hpahcisr-1.2.6-18.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1064865918/v94408/kmod-hpahcisr-1.2.6-18.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u6.i686.rpm     changed HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-hpahcisr-1.2.6-17.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) INSTALLATION

    Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. 

    To install or upgrade the driver type:

          # rpm -Uvh kmod-hpahcisr-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

          # rpm -e kmod-hpahcisr-<version>.<OSupdate>.x86_64.rpm

    NOTE: Since the hpahcisr does not ship with the Operating System, the removal of the hpahcisr rpm will leave your system without an hpahcisr driver to handle disk storage.  It is important that you reinstall the previous working hpahcisr rpm before you reboot or your system will fail.

     

    ]]>         8086 3A25 103C 3118 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpahcisr-1.2.6-18.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u1.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u1.x86_64.rpm kmod-hpahcisr-1.2.6-18.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u2.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u2.x86_64.rpm kmod-hpahcisr-1.2.6-18.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u3.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u3.x86_64.rpm kmod-hpahcisr-1.2.6-18.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u4.x86_64.rpm kmod-hpahcisr-1.2.6-18.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u5.x86_64.rpm kmod-hpahcisr-1.2.6-18.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p424117417/v94410/kmod-hpahcisr-1.2.6-18.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpahcisr-1.2.6-18.rhel6u6.x86_64.rpm     changed HP Dynamic Smart Array B140i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP Dynamic Smart Array B140i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-hpdsa-1.2.2-145.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh Kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e Kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         8086 8D66 1590 009D 8086 8D06 1590 009C software:rpm software:rpm kmod-hpdsa-1.2.2-145.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p298165115/v100158/kmod-hpdsa-1.2.2-145.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpdsa-1.2.2-145.rhel6u5.x86_64.rpm kmod-hpdsa-1.2.2-145.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p298165115/v100158/kmod-hpdsa-1.2.2-145.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpdsa-1.2.2-145.rhel6u6.x86_64.rpm     changed HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 6 (x86) HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 6 (x86) LSI Logic Corporation Red Hat Enterprise Linux 6 Server (x86) kmod-mpt2sas-15.10.04.00-4.rhel6.i686.rpm Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel6xx.i686.rpm (x.x.x.x-x represents the version number)

    To upgrade the driver, type the following command:
    # rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel6xx.i686.rpm (x.x.x.x-x represents the version number)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and
    kmod-mpt2sas-X.X.X.X-X.rhel6xx.i686.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-mpt2sas-15.10.02.00-8.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u3.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u3.i686.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u1.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u1.i686.rpm kmod-mpt2sas-15.10.04.00-3.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.04.00-3.rhel6u6.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.04.00-3.rhel6u6.i686.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u5.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u5.i686.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u2.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u2.i686.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u0.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u0.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u0.i686.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p35387002/v105615/kmod-mpt2sas-15.10.02.00-8.rhel6u4.i686.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u4.i686.rpm     changed HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) LSI Logic Corporation Red Hat Enterprise Linux 6 Server (x86-64) kmod-mpt2sas-15.10.04.00-4.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel6xx.x86_64.rpm (x.x.x.x-x represents the version number)

    To upgrade the driver, type the following command:
    # rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel6xx.x86_64.rpm (x.x.x.x-x represents the version number)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel6xx.x86_64.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-mpt2sas-15.10.02.00-8.rhel6u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u0.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u0.x86_64.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u2.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u2.x86_64.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u4.x86_64.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u5.x86_64.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u3.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u3.x86_64.rpm kmod-mpt2sas-15.10.04.00-3.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.04.00-3.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.04.00-3.rhel6u6.x86_64.rpm kmod-mpt2sas-15.10.02.00-8.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p53865862/v105617/kmod-mpt2sas-15.10.02.00-8.rhel6u1.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.02.00-8.rhel6u1.x86_64.rpm     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (x86) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (x86) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) kmod-hpvsa-1.2.10-120.rhel6.i686.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpvsa-1.2.12-110.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u6.i686.rpm kmod-hpvsa-1.2.12-110.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u3.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u3.i686.rpm kmod-hpvsa-1.2.12-110.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u1.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u1.i686.rpm kmod-hpvsa-1.2.12-110.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u5.i686.rpm kmod-hpvsa-1.2.12-110.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u4.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u4.i686.rpm kmod-hpvsa-1.2.12-110.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p420839710/v105809/kmod-hpvsa-1.2.12-110.rhel6u2.i686.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u2.i686.rpm     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-hpvsa-1.2.10-120.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpvsa-1.2.12-110.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u3.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u3.x86_64.rpm kmod-hpvsa-1.2.12-110.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u4.x86_64.rpm kmod-hpvsa-1.2.12-110.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u6.x86_64.rpm kmod-hpvsa-1.2.12-110.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u1.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u1.x86_64.rpm kmod-hpvsa-1.2.12-110.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u2.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u2.x86_64.rpm kmod-hpvsa-1.2.12-110.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2109600940/v105810/kmod-hpvsa-1.2.12-110.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-110.rhel6u5.x86_64.rpm     changed HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) kmod-hpsa-3.4.8-140.rhel6.i686.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh kmod-hpsa-<version>.<OSupdate>.i686.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e kmod-hpsa-<version>.<OSupdate>.i686.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpsa-3.4.8-140.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u3.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u3.i686.rpm kmod-hpsa-3.4.8-140.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u2.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u2.i686.rpm kmod-hpsa-3.4.8-140.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u5.i686.rpm kmod-hpsa-3.4.8-140.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u1.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u1.i686.rpm kmod-hpsa-3.4.8-140.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u4.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u4.i686.rpm kmod-hpsa-3.4.8-140.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v105819/kmod-hpsa-3.4.8-140.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u6.i686.rpm     changed HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-hpsa-3.4.8-140.rhel6.x86_64.rpm Storage Server Driver - Storage Controller English (US) your hard drive and change to that directory.

    To install or upgrade the driver type:


      # rpm -Uvh kmod-hpsa-<version>.<OSupdate>.x86_64.rpm  

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

      # rpm -e kmod-hpsa-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm kmod-hpsa-3.4.8-140.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u4.x86_64.rpm kmod-hpsa-3.4.8-140.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u6.x86_64.rpm kmod-hpsa-3.4.8-140.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u3.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u3.x86_64.rpm kmod-hpsa-3.4.8-140.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u1.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u1.x86_64.rpm kmod-hpsa-3.4.8-140.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u5.x86_64.rpm kmod-hpsa-3.4.8-140.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v105820/kmod-hpsa-3.4.8-140.rhel6u2.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-140.rhel6u2.x86_64.rpm     changed HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 4 x86_64) HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 4 x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using kernel version 2.6.32-358.el6 or any future errata:

    # rpm -Uvh kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F2 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15B3 1007 103C 2160 15B3 1003 103C 1988 15B3 1007 103C 8020 15B3 1007 103C 801F software:rpm software:rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p851006140/v104128/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p851006140/v104128/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm file://./hp/swpackages/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u4.x86_64.rpm     changed HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 5 x86_64) HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 5 x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using kernel version 2.6.32-431.el6 or any future errata:

    # rpm -Uvh kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1139386315/v104129/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1139386315/v104129/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u5.x86_64.rpm     new HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 6 x86_64) HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 6 Update 6 x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using kernel version 2.6.32-504.el6 or any future errata:

    # rpm -Uvh kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1541829745/v104130/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1541829745/v104130/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel6u6.x86_64.rpm     changed Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586

    ]]>         10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm software:rpm kmod-elx-lpfc-10.2.477.17-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p169331208/v106303/kmod-elx-lpfc-10.2.477.17-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-elx-lpfc-10.2.477.17-1.rhel6u5.x86_64.rpm kmod-elx-lpfc-10.2.477.17-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p169331208/v106303/kmod-elx-lpfc-10.2.477.17-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-elx-lpfc-10.2.477.17-1.rhel6u6.x86_64.rpm     changed Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

    ]]>         1077 2031 103C 1939 1077 2532 103C 338E 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 8021 103c 3348 1077 8021 103C 1957 software:rpm software:rpm kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-3.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p759155241/v101489/kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-3.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-3.rhel6u6.x86_64.rpm kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-2.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p759155241/v101489/kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-2.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla2xxx-8.07.00.16.06.0_k-2.rhel6u5.x86_64.rpm     changed HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 6 i686 HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 337B 19A2 0710 103C 3344 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0710 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 1746 19a2 0700 103c 3314 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 19A2 0718 103C 3341 14E4 168E 103C 1932 10DF 0720 103C 220A software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p689301055/v101452/README kmod-be2net-10.2.477.6-1.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p689301055/v101452/kmod-be2net-10.2.477.6-1.rhel6u6.i686.rpm file://./hp/swpackages/kmod-be2net-10.2.477.6-1.rhel6u6.i686.rpm kmod-be2net-10.2.477.6-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p689301055/v101452/kmod-be2net-10.2.477.6-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-be2net-10.2.477.6-1.rhel6u5.i686.rpm changed HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 6 x86_64 HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 337B 19A2 0710 103C 3344 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0710 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 1746 19a2 0700 103c 3314 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 14E4 168E 103C 1932 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F software:rpm software:rpm kmod-be2net-10.2.477.6-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1522431361/v101453/kmod-be2net-10.2.477.6-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-be2net-10.2.477.6-1.rhel6u6.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1522431361/v101453/README kmod-be2net-10.2.477.6-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1522431361/v101453/kmod-be2net-10.2.477.6-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-be2net-10.2.477.6-1.rhel6u5.x86_64.rpm changed HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 6 i686 HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408516955/v101447/README kmod-be2iscsi-10.2.477.6-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408516955/v101447/kmod-be2iscsi-10.2.477.6-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-be2iscsi-10.2.477.6-1.rhel6u5.i686.rpm kmod-be2iscsi-10.2.477.6-1.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408516955/v101447/kmod-be2iscsi-10.2.477.6-1.rhel6u6.i686.rpm file://./hp/swpackages/kmod-be2iscsi-10.2.477.6-1.rhel6u6.i686.rpm changed HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 6 x86_64 HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p725020304/v101448/README kmod-be2iscsi-10.2.477.6-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p725020304/v101448/kmod-be2iscsi-10.2.477.6-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-be2iscsi-10.2.477.6-1.rhel6u6.x86_64.rpm kmod-be2iscsi-10.2.477.6-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p725020304/v101448/kmod-be2iscsi-10.2.477.6-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-be2iscsi-10.2.477.6-1.rhel6u5.x86_64.rpm changed HP ProLiant Converged Network Utility for Linux x86 HP ProLiant Converged Network Utility for Linux x86 Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) SUSE LINUX Enterprise Server 11 (x86) Networking Server Software - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16A2 103C 1916 14E4 16A2 103C 1917 software:rpm hp-cnu-2.0.11-1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1079400450/v101040/hp-cnu-2.0.11-1.i386.rpm file://./hp/swpackages/hp-cnu-2.0.11-1.i386.rpm changed HP ProLiant Converged Network Utility for Linux x86_64 HP ProLiant Converged Network Utility for Linux x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server Networking Server Software - Network English (US) 14E4 168E 103C 1932 14E4 168E 103C 193A 14E4 168E 103C 1930 14E4 168E 103C 1933 14E4 168E 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16A2 103C 22FA software:rpm hp-cnu-2.0.11-1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p999031075/v101039/hp-cnu-2.0.11-1.x86_64.rpm file://./hp/swpackages/hp-cnu-2.0.11-1.x86_64.rpm changed HP Intel e1000e Drivers for Red Hat Enterprise Linux 6 i686 HP Intel e1000e Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1529569922/v102294/README kmod-hp-e1000e-3.2.2.1-3.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1529569922/v102294/kmod-hp-e1000e-3.2.2.1-3.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hp-e1000e-3.2.2.1-3.rhel6u5.i686.rpm kmod-hp-e1000e-3.2.2.1-3.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1529569922/v102294/kmod-hp-e1000e-3.2.2.1-3.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hp-e1000e-3.2.2.1-3.rhel6u6.i686.rpm changed HP Intel e1000e Drivers for Red Hat Enterprise Linux 6 x86_64 HP Intel e1000e Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1495019645/v102295/README kmod-hp-e1000e-3.2.2.1-3.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1495019645/v102295/kmod-hp-e1000e-3.2.2.1-3.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hp-e1000e-3.2.2.1-3.rhel6u5.x86_64.rpm kmod-hp-e1000e-3.2.2.1-3.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1495019645/v102295/kmod-hp-e1000e-3.2.2.1-3.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hp-e1000e-3.2.2.1-3.rhel6u6.x86_64.rpm changed HP Intel igb Drivers for Red Hat Enterprise Linux 6 i686 HP Intel igb Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm software:rpm kmod-hp-igb-5.2.15-2.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p106989677/v102303/kmod-hp-igb-5.2.15-2.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hp-igb-5.2.15-2.rhel6u5.i686.rpm kmod-hp-igb-5.2.15-2.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p106989677/v102303/kmod-hp-igb-5.2.15-2.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hp-igb-5.2.15-2.rhel6u6.i686.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p106989677/v102303/README changed HP Intel igb Drivers for Red Hat Enterprise Linux 6 x86_64 HP Intel igb Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p344726237/v102304/README kmod-hp-igb-5.2.15-2.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p344726237/v102304/kmod-hp-igb-5.2.15-2.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hp-igb-5.2.15-2.rhel6u5.x86_64.rpm kmod-hp-igb-5.2.15-2.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p344726237/v102304/kmod-hp-igb-5.2.15-2.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hp-igb-5.2.15-2.rhel6u6.x86_64.rpm changed HP Intel ixgbe Drivers for Red Hat Enterprise Linux 6 i686 HP Intel ixgbe Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p298403894/v102310/README kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p298403894/v102310/kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.i686.rpm kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p298403894/v102310/kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.i686.rpm changed HP Intel ixgbe Drivers for Red Hat Enterprise Linux 6 x86_64 HP Intel ixgbe Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm software:rpm kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1991975373/v102311/kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbe-3.23.0.79-1.rhel6u6.x86_64.rpm kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1991975373/v102311/kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbe-3.23.0.79-1.rhel6u5.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1991975373/v102311/README changed HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 6 x86_64 HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1670749961/v102316/README kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1670749961/v102316/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.x86_64.rpm kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1670749961/v102316/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.x86_64.rpm changed HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 6 i686 HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2006002220/v102315/README kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2006002220/v102315/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u5.i686.rpm kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2006002220/v102315/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hp-ixgbevf-2.16.0.43-1.rhel6u6.i686.rpm changed HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 6 i686 HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 1639 103C 7055 software:rpm software:rpm kmod-netxtreme2-7.10.73-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p613544495/v100892/kmod-netxtreme2-7.10.73-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-netxtreme2-7.10.73-1.rhel6u5.i686.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p613544495/v100892/README kmod-netxtreme2-7.10.73-1.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p613544495/v100892/kmod-netxtreme2-7.10.73-1.rhel6u6.i686.rpm file://./hp/swpackages/kmod-netxtreme2-7.10.73-1.rhel6u6.i686.rpm changed HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 6 x86_64 HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16AD 103C 22FA 14E4 16A4 103C 22FA 14E4 1639 103C 7055 software:rpm software:rpm kmod-netxtreme2-7.10.73-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p227309074/v100893/kmod-netxtreme2-7.10.73-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-netxtreme2-7.10.73-1.rhel6u5.x86_64.rpm kmod-netxtreme2-7.10.73-1.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p227309074/v100893/kmod-netxtreme2-7.10.73-1.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-netxtreme2-7.10.73-1.rhel6u6.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p227309074/v100893/README changed HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 6 i686 HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p261014010/v100563/kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.i686.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p261014010/v100563/README hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p261014010/v100563/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p261014010/v100563/hp-nx_nic-docs-1.0.5-2.noarch.rpm kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p261014010/v100563/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.i686.rpm changed HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 6 x86_64 HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p868448018/v100564/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p868448018/v100564/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel6u5.x86_64.rpm hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p868448018/v100564/hp-nx_nic-docs-1.0.5-2.noarch.rpm kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p868448018/v100564/kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-nx_nic-4.0.596.1-3.rhel6u6.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p868448018/v100564/README changed HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 6 i686 HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 1077 8022 103C 1957 1077 8022 103C 3347 software:rpm software:rpm hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44295815/v102044/hp-qlgc-utils-1.0.6-1.noarch.rpm kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44295815/v102044/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.i686.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44295815/v102044/README hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44295815/v102044/hp-qlgc-docs-1.0.6-1.noarch.rpm kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44295815/v102044/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.i686.rpm changed HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 6 x86_64 HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 1077 8022 103C 3347 1077 8022 103C 1957 software:rpm software:rpm hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p80789691/v102045/hp-qlgc-utils-1.0.6-1.noarch.rpm kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p80789691/v102045/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-2.rhel6u6.x86_64.rpm kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p80789691/v102045/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel6u5.x86_64.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p80789691/v102045/hp-qlgc-docs-1.0.6-1.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p80789691/v102045/README changed HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 6 i686 HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p920695008/v100570/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.i686.rpm file://./hp/swpackages/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.i686.rpm kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p920695008/v100570/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.i686.rpm file://./hp/swpackages/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.i686.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p920695008/v100570/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p920695008/v100570/hp-qlgc-utils-1.0.6-1.noarch.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p920695008/v100570/hp-qlgc-docs-1.0.6-1.noarch.rpm changed HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 6 x86_64 HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p900745017/v100571/hp-qlgc-docs-1.0.6-1.noarch.rpm kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p900745017/v100571/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u6.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p900745017/v100571/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p900745017/v100571/hp-qlgc-utils-1.0.6-1.noarch.rpm kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p900745017/v100571/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel6u5.x86_64.rpm changed HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 6 i686 HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 6 i686 Red Hat Enterprise Linux 6 Server (x86) Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p673224688/v99911/README kmod-tg3-3.137e-3.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p673224688/v99911/kmod-tg3-3.137e-3.rhel6u6.i686.rpm file://./hp/swpackages/kmod-tg3-3.137e-3.rhel6u6.i686.rpm kmod-tg3-3.137e-3.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p673224688/v99911/kmod-tg3-3.137e-3.rhel6u5.i686.rpm file://./hp/swpackages/kmod-tg3-3.137e-3.rhel6u5.i686.rpm changed HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 6 x86_64 HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 6 x86_64 Red Hat Enterprise Linux 6 Server (x86-64) Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm software:rpm kmod-tg3-3.137e-3.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1193481447/v99912/kmod-tg3-3.137e-3.rhel6u5.x86_64.rpm file://./hp/swpackages/kmod-tg3-3.137e-3.rhel6u5.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1193481447/v99912/README kmod-tg3-3.137e-3.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1193481447/v99912/kmod-tg3-3.137e-3.rhel6u6.x86_64.rpm file://./hp/swpackages/kmod-tg3-3.137e-3.rhel6u6.x86_64.rpm changed Broadcom Active Health System Agent for HP ProLiant Network Adapters for Linux i586 Broadcom Active Health System Agent for HP ProLiant Network Adapters for Linux i586 Red Hat Enterprise Linux 6 Server (x86) SUSE LINUX Enterprise Server 11 (x86) hp-tg3sd-1.0.15-1.i586.rpm Networking Server Software - Network English (US) 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 165F 103C 2133 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm hp-tg3sd-1.0.15-1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390237103/v102291/hp-tg3sd-1.0.15-1.i586.rpm file://./hp/swpackages/hp-tg3sd-1.0.15-1.i586.rpm changed Broadcom Active Health System Agent for HP ProLiant Network Adapters for Linux x86_64 Broadcom Active Health System Agent for HP ProLiant Network Adapters for Linux x86_64 Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-tg3sd-1.0.15-1.x86_64.rpm Networking Server Software - Network English (US) 14E4 165F 103C 1786 14E4 1655 103C 18D2 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 165F 103C 2133 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm hp-tg3sd-1.0.15-1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247939086/v102292/hp-tg3sd-1.0.15-1.x86_64.rpm file://./hp/swpackages/hp-tg3sd-1.0.15-1.x86_64.rpm changed Intel Active Health System Agent for HP ProLiant Network Adapters for Linux x86_64 Intel Active Health System Agent for HP ProLiant Network Adapters for Linux x86_64 Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-ocsbbd-1.1.64.0-1.x86_64.rpm Networking Server Software - Network English (US) 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 1521 103C 2003 8086 1523 103C 1989 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 211B 8086 10FB 103C 2159 8086 1521 103C 2226 software:rpm hp-ocsbbd-1.1.64.0-1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p798236979/v100884/hp-ocsbbd-1.1.64.0-1.x86_64.rpm file://./hp/swpackages/hp-ocsbbd-1.1.64.0-1.x86_64.rpm changed Intel Active Health System Agent for HP ProLiant Network Adapters for Linux i586 Intel Active Health System Agent for HP ProLiant Network Adapters for Linux i586 Red Hat Enterprise Linux 6 Server (x86) SUSE LINUX Enterprise Server 11 (x86) hp-ocsbbd-1.1.64.0-1.i586.rpm Networking Server Software - Network English (US) 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 1521 103C 2003 8086 1523 103C 1989 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 211B 8086 10FB 103C 2159 8086 1521 103C 2226 software:rpm hp-ocsbbd-1.1.64.0-1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1759407908/v100883/hp-ocsbbd-1.1.64.0-1.i586.rpm file://./hp/swpackages/hp-ocsbbd-1.1.64.0-1.i586.rpm changed HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 6 (x86) hp-health Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) Storage Server Software - System Management English (US) To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.27.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1894587761/v98545/hp-health-10.10-1710.27.rhel6.i686.rpm file://./hp/swpackages/hp-health-10.10-1710.27.rhel6.i686.rpm     changed HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 6 (AMD64/EM64T) hp-health Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.30.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1526326528/v98546/hp-health-10.10-1710.30.rhel6.x86_64.rpm file://./hp/swpackages/hp-health-10.10-1710.30.rhel6.x86_64.rpm     changed HP SNMP Agents for Red Hat Enterprise Linux 6 (x86) hp-snmp-agents Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) Storage Server Software - System Management English (US) To get the list of all dependency files for hp-snmp-agents type:

    rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.25.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1728399785/v98552/hp-snmp-agents-10.10-2732.25.rhel6.i686.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.25.rhel6.i686.rpm     changed HP SNMP Agents for Red Hat Enterprise Linux 6 (AMD64/EM64T) hp-snmp-agents Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.25.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p195109660/v98553/hp-snmp-agents-10.10-2732.25.rhel6.x86_64.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.25.rhel6.x86_64.rpm     new HP System Management Homepage for Linux (x86) HP System Management Homepage Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 5 Desktop (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.4.2-4.i386.rpm Server Software - System Management English (US), Japanese
  • Installation: rpm -ivh hpsmh-< version >.i386.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.i386.rpm
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.i386.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.i386.rpm).
    • ]]>         software:rpm hpsmh-7.4.2-4.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224445684/v103882/hpsmh-7.4.2-4.i386.rpm file://./hp/swpackages/hpsmh-7.4.2-4.i386.rpm hpsmh-7.4.2-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224445684/v103882/hpsmh-7.4.2-3.i386.rpm     new HP System Management Homepage for Linux (AMD64/EM64T) HP System Management Homepage for Linux (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.4.2-4.x86_64.rpm Server Software - System Management English (US), Japanese
  • Installation: rpm -ivh hpsmh-< version >.x86_64.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).
    • ]]>         software:rpm hpsmh-7.4.2-4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1580676007/v103883/hpsmh-7.4.2-4.x86_64.rpm file://./hp/swpackages/hpsmh-7.4.2-4.x86_64.rpm hpsmh-7.4.2-3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1580676007/v103883/hpsmh-7.4.2-3.x86_64.rpm     changed HP System Management Homepage Templates for Linux hp-smh-templates Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-smh-templates-10.1.0-%build.version_subst%.noarch Storage Server Software - System Management English (US) To get the list of all dependency files for hp-smh-templates type:

    rpm –qp –-requires hp-smh-templates-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

             rpm -ivh hp-smh-templates-<version>.rpm

    To check whether the package is installed type:

             rpm –q hp-smh-templates

    Additional help is available by typing:

             man hp-smh-templates

    ]]>         software:rpm hp-smh-templates-10.1.0-1415.23.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1571364464/v98551/hp-smh-templates-10.1.0-1415.23.noarch.rpm file://./hp/swpackages/hp-smh-templates-10.1.0-1415.23.noarch.rpm     changed HP ProLiant Agentless Management Service for Red Hat Enterprise Linux 6 (x86) hp-ams Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.4.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p982136922/v105282/hp-ams-2.1.1-1594.4.rhel6.i686.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.4.rhel6.i686.rpm     changed HP ProLiant Agentless Management Service for Red Hat Enterprise Linux 6 (AMD64/EM64T) hp-ams Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.4.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p159256077/v105281/hp-ams-2.1.1-1594.4.rhel6.x86_64.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.4.rhel6.x86_64.rpm     changed HP Smart Storage Administrator (HP SSA) for Linux HP Smart Storage Administrator (HP SSA) for Linux Hewlett-Packard Development Company, L.P. Red Hat Linux 8.0 Red Hat Linux 7.3 Red Hat Linux 7.2 Red Hat Enterprise Linux 2.1 Red Hat Enterprise Linux 3 (x86) SUSE Linux Enterprise Server 8 SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 7 Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (x86) Red Hat Linux 7.1 Red Hat Linux 7.0 Red Hat Linux 6.2 Red Hat Linux 6.1 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpssa-2.10-14.0.i386.rpm Storage Server Software - System Management English (US) The HP Smart Storage Administrator for Linux requires the HP System Management Homepage software to be installed on the server.  If the HP System Management Homepage software is not already installed on your server, please download it from HP.com and install it before installing the HP Smart Storage Administrator for Linux.

    IMPORTANT UPDATE: HP SSA (GUI) for Linux can now be run without requiring the HP System Management Homepage.  HP SSA now supports a Local Application Mode for Linux.  The HP System Management Homepage is still supported, but no longer required to run the HP SSA GUI.

    To invoke, enter the following at the command prompt:

    hpssa -local

    The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.

    ]]>
  • HP SSA is distributed using Red Hat Package Manager (RPM) packages.

  • If there is an older version of HP SSA installed on the system, please use "rpm -e hpssa" to remove it first.

  • Use "rpm -i < file name >" to install the server.

  • Please type "man rpm" for other details regarding RPM.

  • The software resides in /opt/hp/hpssa and the executable name is hpssa which is located in /usr/sbin.

  • For more details refer to the README text file which can be viewed by using the man command:
    man hpssa
    • ]]>
    • Automatically load images and other data types.

    • JAVA script

    • Style sheets
    For support for HP SSA or Smart Array controllers, please visit Contact HP.]]>         software:rpm hpssa-2.10-14.0.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p75895970/v99640/hpssa-2.10-14.0.i386.rpm file://./hp/swpackages/hpssa-2.10-14.0.i386.rpm     changed HP Smart Storage Administrator (HP SSA) for Linux 64-bit HP Smart Storage Administrator (HP SSA) for Linux 64-bit Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 hpssa-2.10-14.0.x86_64.rpm Storage Server Software - System Management English (US) The HP Smart Storage Administrator for Linux requires the HP System Management Homepage software to be installed on the server.  If the HP System Management Homepage software is not already installed on your server, please download it from HP.com and install it before installing the HP Smart Storage Administrator for Linux.

    IMPORTANT UPDATE: HP SSA (GUI) for Linux can now be run without requiring the HP System Management Homepage.  HP SSA now supports a Local Application Mode for Linux.  The HP System Management Homepage is still supported, but no longer required to run the HP SSA GUI.

    To invoke, enter the following at the command prompt:

    hpssa -local

    The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.

    ]]>
  • HP SSA is distributed using Red Hat Package Manager (RPM) packages.

  • If there is an older version of HP SSA  installed on the system, please use "rpm -e hpssa" to remove it first.

  • Use "rpm -i < file name >" to install the server.

  • Please type "man rpm" for other details regarding RPM.

  • The software resides in /opt/hp/hpssa and the executable name is hpssa which is located in /usr/sbin.

  • For more details refer to the README text file which can be viewed by using the man command:
    man hpssa
    • ]]>
    • Automatically load images and other data types.

    • JAVA script

    • Style sheets
    For support for HP SSA or Smart Array controllers, please visit Contact HP.]]>         software:rpm hpssa-2.10-14.0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1884686644/v99639/hpssa-2.10-14.0.x86_64.rpm file://./hp/swpackages/hpssa-2.10-14.0.x86_64.rpm     changed HP Smart Storage Administrator (HP SSA) CLI for Linux HP Smart Storage Administrator (HP SSA) CLI for Linux Hewlett-Packard Development Company, L.P. Red Hat Linux 8.0 Red Hat Linux 7.3 Red Hat Linux 7.2 Red Hat Enterprise Linux 2.1 Red Hat Enterprise Linux 3 (x86) SUSE Linux Enterprise Server 8 SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 7 Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (x86) Red Hat Linux 7.1 Red Hat Linux 7.0 Red Hat Linux 6.2 Red Hat Linux 6.1 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpssacli-2.10-14.0.i386.rpm Storage Server Software - System Management English (US), Japanese, German, French, Italian, Spanish If there is an older version of HP SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         software:rpm hpssacli-2.10-14.0.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1865889733/v99642/hpssacli-2.10-14.0.i386.rpm file://./hp/swpackages/hpssacli-2.10-14.0.i386.rpm     changed HP Smart Storage Administrator (HP SSA) CLI for Linux 64-bit HP Smart Storage Administrator (HP SSA) CLI for Linux 64-bit Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 hpssacli-2.10-14.0.x86_64.rpm Storage Server Software - System Management English (US), Japanese, German, French, Italian, Spanish If there is an older version of HP SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         software:rpm hpssacli-2.10-14.0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p215599048/v99641/hpssacli-2.10-14.0.x86_64.rpm file://./hp/swpackages/hpssacli-2.10-14.0.x86_64.rpm     changed HP Fibre Channel Enablement Kit for Linux - QLogic HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions Networking Storage Server Software - Storage Fibre Channel HBA English (US) There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

    To uninstall the hp-fc-enablement RPM use the following command:

       # rpm -e hp-fc-enablement-<version>.noarch.rpm

    To install the vendor specific enablement RPM use the following command:

      # rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm 

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
                   http://ww.hp.com/storage/spock/

    ]]>         1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 8021 103C 1957 1077 8020 103C 1957 1077 8022 103C 1957 1077 8020 103C 3733 software:rpm HP-CNA-FC-hpqlgc-Enablement-Kit-4.0.0.0-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1556171447/v101943/HP-CNA-FC-hpqlgc-Enablement-Kit-4.0.0.0-1.noarch.rpm file://./hp/swpackages/HP-CNA-FC-hpqlgc-Enablement-Kit-4.0.0.0-1.noarch.rpm     changed HP Fibre Channel Enablement Kit for Linux - QLogic BR-Series HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server ServerOptions Networking Software - Storage Fibre Channel HBA English (US) There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

    To uninstall the hp-fc-enablement RPM use the following command:

       # rpm -e hp-fc-enablement-<version>.noarch.rpm

    To install the hp-fc-enablement RPM use the following command:

      # rpm -ivh HP-FC-Brocade-enablement-<version>.<arch>.rpm

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     

    http://ww.hp.com/storage/spock/

     

    ]]>         1657 0013 1657 0014 1657 0017 1657 0014 1657 0017 103c 1743 1657 0013 103c 1742 1657 0021 103c 1779 software:rpm HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p376163449/v103047/HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm file://./hp/swpackages/HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm     changed HP Fibre Channel Enablement Kit for Linux - Emulex HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) To install or upgrade the Enablement Kit rpm use the following command:
     
    # rpm -Uvh <Enablement-Kit-File-Name>.rpm
     
    NOTE: If an early version of the Enablement Kit is installed (a version prior to 6.x.x.x) it is strongly recommend that you uninstall the previous kit prior to installation of this rpm. To uninstall the Enablement Kit use the following command:
     
    # rpm –e <Enablement-Kit-Name>
     
    After uninstalling the previous kit, proceed with installation of the new kit as described above.

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
               http://ww.hp.com/storage/spock/
     

    ]]>         10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1712077445/v101492/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel6.x86_64.rpm file://./hp/swpackages/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel6.x86_64.rpm     new Fibreutils for HP Storage Fibre Channel Host Bus Adapters for Linux (x86) Fibreutils for HP Storage Fibre Channel Host Bus Adapters (x86) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) Red Hat Enterprise Linux 6 Server (x86) SUSE LINUX Enterprise Server 11 (x86) fibreutils-3.2-6.i386.rpm ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US)  
    ]]>         Use rpm -Uvh command to install/upgrade RPM.]]> 1077 2312 0E11 0102 1077 2312 0E11 0101 1077 2312 0E11 0100 1077 2312 1077 0100 1077 2312 1077 0103 1077 2312 1077 0101 1077 2312 1077 0109 1077 2312 0E11 12BA 1077 2312 1077 0102 1077 2312 103C 12BA 1077 2312 103C 12C2 1077 6312 1077 0119 1077 2312 0E11 0104 1077 2312 0E11 0103 1077 2312 1077 0117 1077 2322 1077 0117 1077 2322 1077 0118 1077 2300 1077 0106 1077 2322 8086 34BC 1077 2300 1077 0009 1077 2312 1028 011A 1077 2312 1028 013B 1077 2312 1028 013C 1077 2312 1014 027D 1077 2312 1077 010C 1077 2312 1077 010D 1077 2312 1077 0118 1077 2322 1077 0115 1077 2322 1077 0116 1077 2312 1077 010A 1077 2312 1077 0104 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 1077 2422 103C 12D7 1077 2422 103C 12DD 1077 2432 103C 7041 1077 2432 103C 7040 10DF FD00 10DF FD00 10DF F0D5 10DF F0D5 1077 2432 103C 1705 10DF FE00 103C 1708 1077 2422 1077 0148 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 10DF F0A5 103C 1702 10DF F100 103C 3281 10DF F100 103C 1719 10DF F100 103C 3282 10DF F100 103C 338F 10DF 0724 103C 21D4 19A2 0714 103C 3344 19A2 0704 103C 174B 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF 0724 103C 220A 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 338E 1077 2031 103C 1939 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1657 0021 103c 1779 1657 0013 103c 1742 1657 0017 103c 1743 1657 0013 103c 1744 1657 0017 103c 1741 10DF F100 103C 2238 software:rpm fibreutils-3.2-6.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1151704062/v95968/fibreutils-3.2-6.i386.rpm file://./hp/swpackages/fibreutils-3.2-6.i386.rpm     new Fibreutils for HP Storage Fibre Channel Host Bus Adapters for Linux (x86_64) Fibreutils for HP Storage Fibre Channel Host Bus Adapters (x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 fibreutils-3.2-6.x86_64.rpm ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) ]]> Use rpm -Uvh command to install/upgrade RPM.]]> 1077 2312 0E11 0102 1077 2312 0E11 0101 1077 2312 0E11 0100 1077 2312 1077 0100 1077 2312 1077 0103 1077 2312 1077 0101 1077 2312 1077 0109 1077 2312 0E11 12BA 1077 2312 1077 0102 1077 2312 103C 12BA 1077 2312 103C 12C2 1077 6312 1077 0119 1077 2312 0E11 0104 1077 2312 0E11 0103 1077 2312 1077 0117 1077 2322 1077 0117 1077 2322 1077 0118 1077 2300 1077 0106 1077 2322 8086 34BC 1077 2300 1077 0009 1077 2312 1028 011A 1077 2312 1028 013B 1077 2312 1028 013C 1077 2312 1014 027D 1077 2312 1077 010C 1077 2312 1077 010D 1077 2312 1077 0118 1077 2322 1077 0115 1077 2322 1077 0116 1077 2312 1077 010A 1077 2312 1077 0104 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 1077 2422 103C 12D7 1077 2422 103C 12DD 1077 2432 103C 7041 1077 2432 103C 7040 10DF FD00 10DF FD00 10DF F0D5 10DF F0D5 1077 2432 103C 1705 10DF FE00 103C 1708 1077 2422 1077 0148 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 10DF F0A5 103C 1702 10DF F100 103C 3281 10DF F100 103C 1719 10DF F100 103C 3282 10DF F100 103C 338F 10DF 0724 103C 21D4 19A2 0714 103C 3344 19A2 0704 103C 174B 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 338E 1077 2031 103C 1939 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1657 0021 103c 1779 1657 0013 103c 1742 1657 0017 103c 1743 1657 0013 103c 1744 1657 0017 103c 1741 10DF F100 103C 2238 software:rpm fibreutils-3.2-6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1577179293/v102871/fibreutils-3.2-6.x86_64.rpm file://./hp/swpackages/fibreutils-3.2-6.x86_64.rpm new HP Lights-Out Online Configuration Utility for Linux (x86/AMD32) HP Lights-Out Online Configuration Utility for Linux (x86/AMD32) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) hponcfg-4.3.0-0.noarch.x86_32.rpm Lights Out Server Software - Lights-Out Management English (US)
    • Integrated Lights-Out 2 firmware v1.00 or later
    • Integrated Lights-Out 3 firmware v1.00 or later
    • Integrated Lights-Out 4 firmware v1.00 or later

    The management interface driver and management agents must be installed on the server.

    ]]>

    If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :

      rpm -e hponcfg
    To install the package, type:
      rpm -ivh hponcfg-< version >.noarch.rpm
    After installation, the executable for hponcfg utility can be found under the directory /sbin.]]>         103c 3307 103c 3309 103c 3306 103c 3309 103c 3302 103c 3309 103c 3300 103c 3309 103c 3308 103c 3309 103c 3301 103c 3309 103c 3300 103c 330e 103c 3301 103c 330e 103c 3302 103c 330e 103c 3306 103c 330e 103c 3307 103c 330e 103c 3308 103c 330e 103C 3306 103C 3381 103C 3307 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 software:rpm hponcfg-4.4.0-0.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1980791501/v94621/hponcfg-4.4.0-0.i386.rpm file://./hp/swpackages/hponcfg-4.4.0-0.i386.rpm     changed HP Lights-Out Online Configuration Utility for Linux (AMD64/EM64T) HP Lights-Out Online Configuration Utility for Linux (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hponcfg-4.4.0-0.noarch.x86_64.rpm Lights Out Server Software - Lights-Out Management English (US)
    • Integrated Lights-Out 2 firmware v1.00 or later
    • Integrated Lights-Out 3 firmware v1.00 or later
    • Integrated Lights-Out 4 firmware v1.00 or later

    The management interface driver and management agents must be installed on the server.

    ]]>

    If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :

      rpm -e hponcfg
    To install the package, type:
      rpm -ivh hponcfg-< version >.noarch.rpm
    After installation, the executable for hponcfg utility can be found under the directory /sbin.]]>         103c 3307 103c 3309 103c 3306 103c 3309 103c 3302 103c 3309 103c 3300 103c 3309 103c 3308 103c 3309 103c 3301 103c 3309 103c 3300 103c 330e 103c 3301 103c 330e 103c 3302 103c 330e 103c 3306 103c 330e 103c 3307 103c 330e 103c 3308 103c 330e 103C 3306 103C 3381 103C 3307 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 software:rpm hponcfg-4.4.0-0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p975958736/v94623/hponcfg-4.4.0-0.x86_64.rpm file://./hp/swpackages/hponcfg-4.4.0-0.x86_64.rpm     new HP Insight Diagnostics Online Edition for Linux (x86 32-bit) HP Insight Diagnostics Online Edition for Linux (x86 32-bit) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) hpdiags-10.26.1874.linux.i586.rpm Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified)
  • HP System Management Homepage, version 7.0.0-12 or higher
    • The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
    • HP System Health Application, version 9.0.0 or higher

    ]]>         The current Support Pack for Red Hat Enterprise Linux 5 should be installed.

    Login as root and download the Insight Diagnostics rpm to a directory on your hard drive and change to that directory. Enter the following command to install the utility:

      rpm -Uvh < rpmFilename >
    For example, rpm -Uvh hpdiags-< version >.i586.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:
      cd /opt/hp/hpdiags/
      ./hpdiags -?
    ]]>         software:rpm hpdiags-10.26.1874-1773.linux.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p794310095/v105446/hpdiags-10.26.1874-1773.linux.i586.rpm file://./hp/swpackages/hpdiags-10.26.1874-1773.linux.i586.rpm hpdiags-10.26.1874-1773.linux.i586.rpm.sig http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p794310095/v105446/hpdiags-10.26.1874-1773.linux.i586.rpm.sig     changed HP Insight Diagnostics Online Edition for Linux (x86-64) HP Insight Diagnostics Online Edition for Linux (x86-64) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) hpdiags-10.26.1874.linux.x86_64.rpm Server Software - System Management English (US), Japanese, German, French, Italian, Spanish, Chinese (Simplified)
  • HP System Management Homepage, version 7.0.0-12 or higher
    • The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
    • HP System Health Application, version 9.0.0 or higher

    ]]>         The current Support Pack for Red Hat Enterprise Linux 5 should be installed.

    Login as root and download the Insight Diagnostics rpm to a directory on your hard drive and change to that directory. Enter the following command to install the utility:

      rpm -Uvh < rpmFilename >
    For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:
      cd /opt/hp/hpdiags/
      ./hpdiags -?
    ]]>         software:rpm hpdiags-10.26.1874-1773.linux.x86_64.rpm.sig http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1317534625/v105447/hpdiags-10.26.1874-1773.linux.x86_64.rpm.sig hpdiags-10.26.1874-1773.linux.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1317534625/v105447/hpdiags-10.26.1874-1773.linux.x86_64.rpm file://./hp/swpackages/hpdiags-10.26.1874-1773.linux.x86_64.rpm     changed HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server kmod-hpsa-3.4.8-142.rhel7.x86_64.rpm Storage Server Driver - Storage Controller English (US) your hard drive and change to that directory.

    To install or upgrade the driver type:


      # rpm -Uvh kmod-hpsa-<version>.el6.x86_64.rpm  

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

      # rpm -e kmod-hpsa-<version>.el6.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca software:rpm software:rpm kmod-hpsa-3.4.8-142.rhel7u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p447664951/v105311/kmod-hpsa-3.4.8-142.rhel7u1.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-142.rhel7u1.x86_64.rpm kmod-hpsa-3.4.8-142.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p447664951/v105311/kmod-hpsa-3.4.8-142.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpsa-3.4.8-142.rhel7u0.x86_64.rpm     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server kmod-hpvsa-1.2.12-112.rhel7.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm kmod-hpvsa-1.2.12-112.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1347376061/v105312/kmod-hpvsa-1.2.12-112.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-112.rhel7u0.x86_64.rpm kmod-hpvsa-1.2.12-112.rhel7u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1347376061/v105312/kmod-hpvsa-1.2.12-112.rhel7u1.x86_64.rpm file://./hp/swpackages/kmod-hpvsa-1.2.12-112.rhel7u1.x86_64.rpm     changed HP Dynamic Smart Array B140i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HP Dynamic Smart Array B140i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server kmod-hpdsa-1.2.2-145.rhel7.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         8086 8D66 1590 009D 8086 8D06 1590 009C software:rpm software:rpm kmod-hpdsa-1.2.2-147.rhel7u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p264447842/v105310/kmod-hpdsa-1.2.2-147.rhel7u1.x86_64.rpm file://./hp/swpackages/kmod-hpdsa-1.2.2-147.rhel7u1.x86_64.rpm kmod-hpdsa-1.2.2-147.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p264447842/v105310/kmod-hpdsa-1.2.2-147.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpdsa-1.2.2-147.rhel7u0.x86_64.rpm     new HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HP H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) LSI Logic Corporation Red Hat Enterprise Linux 7 Server Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

    To upgrade the driver, type the following command:
    # rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm kmod-mpt2sas-15.10.03.00-2.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1856633254/v105813/kmod-mpt2sas-15.10.03.00-2.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-mpt2sas-15.10.03.00-2.rhel7u0.x86_64.rpm     changed HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 7 x86_64) HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 7 x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using kernel version 3.10.0-123.el7 or any future errata:

    # rpm -Uvh kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1617699256/v104131/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-mlnx-en-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1617699256/v104131/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.rhel7u0.x86_64.rpm     new HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 7 Update 1 x86_64) HP Mellanox EN Driver for InfiniBand adapters (Red Hat Enterprise Linux 7 Update 1 x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using kernel version 3.10.0-229.el7 or any future errata:

    # rpm -Uvh kmod-mlnx-en-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm mlnx-en-utils-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p382988871/v104642/mlnx-en-utils-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm kmod-mlnx-en-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p382988871/v104642/kmod-mlnx-en-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm file://./hp/swpackages/kmod-mlnx-en-2.3-2.0.1.0.g8bc55fa.rhel7u1.x86_64.rpm     new Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586

    ]]>         10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm kmod-elx-lpfc-10.2.477.17-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2105197211/v106304/kmod-elx-lpfc-10.2.477.17-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-elx-lpfc-10.2.477.17-1.rhel7u0.x86_64.rpm     new Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:
                       
                        # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                          # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

    ]]>         1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 8021 103c 3348 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103C 1957 1077 2031 103C 1939 1077 2532 103C 338E 1077 2532 103C 3261 1077 2432 103C 1705 software:rpm kmod-hpqlgc-qla2xxx-8.07.00.16.07.0_k-2.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1669395582/v103557/kmod-hpqlgc-qla2xxx-8.07.00.16.07.0_k-2.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla2xxx-8.07.00.16.07.0_k-2.rhel7u0.x86_64.rpm     changed HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 7 x86_64 HP Emulex 10/20 GbE iSCSI Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 software:rpm kmod-be2iscsi-10.2.477.6-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1918469095/v101449/kmod-be2iscsi-10.2.477.6-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-be2iscsi-10.2.477.6-1.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1918469095/v101449/README changed HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 7 x86_64 HP Emulex 10/20 GbE Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 337B 19A2 0710 103C 3344 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0710 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 1746 19a2 0700 103c 3314 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 14E4 168E 103C 1932 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1969232260/v101454/README kmod-be2net-10.2.477.6-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1969232260/v101454/kmod-be2net-10.2.477.6-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-be2net-10.2.477.6-1.rhel7u0.x86_64.rpm changed HP Intel e1000e Drivers for Red Hat Enterprise Linux 7 x86_64 HP Intel e1000e Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1034950943/v102296/README kmod-hp-e1000e-3.2.2.1-3.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1034950943/v102296/kmod-hp-e1000e-3.2.2.1-3.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hp-e1000e-3.2.2.1-3.rhel7u0.x86_64.rpm changed HP Intel ixgbe Drivers for Red Hat Enterprise Linux 7 x86_64 HP Intel ixgbe Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154392705/v102312/README kmod-hp-ixgbe-3.23.0.79-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154392705/v102312/kmod-hp-ixgbe-3.23.0.79-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbe-3.23.0.79-1.rhel7u0.x86_64.rpm changed HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 7 x86_64 HP Intel ixgbevf Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm kmod-hp-ixgbevf-2.16.0.43-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p296966260/v102317/kmod-hp-ixgbevf-2.16.0.43-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hp-ixgbevf-2.16.0.43-1.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p296966260/v102317/README changed HP Intel igb Drivers for Red Hat Enterprise Linux 7 x86_64 HP Intel igb Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm kmod-hp-igb-5.2.15-2.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1049427758/v102305/kmod-hp-igb-5.2.15-2.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hp-igb-5.2.15-2.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1049427758/v102305/README changed HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 7 x86_64 HP Broadcom 1/10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16AD 103C 22FA 14E4 16A4 103C 22FA 14E4 1639 103C 7055 software:rpm kmod-netxtreme2-7.10.73-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1050551721/v105712/kmod-netxtreme2-7.10.73-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-netxtreme2-7.10.73-1.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1050551721/v105712/README changed HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 7 x86_64 HP QLogic nx_nic Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p715234276/v100565/README hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p715234276/v100565/hp-nx_nic-docs-1.0.5-2.noarch.rpm file://./hp/swpackages/hp-nx_nic-docs-1.0.5-2.noarch.rpm hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p715234276/v100565/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm file://./hp/swpackages/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p715234276/v100565/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-nx_nic-4.0.596.1-1.rhel7u0.x86_64.rpm changed HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 7 x86_64 HP QLogic iSCSI Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 1077 8022 103C 3347 1077 8022 103C 1957 software:rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p112548175/v102046/hp-qlgc-docs-1.0.6-1.noarch.rpm kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p112548175/v102046/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qla4xxx-5.04.01.09.00.00_k0-1.rhel7u0.x86_64.rpm hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p112548175/v102046/hp-qlgc-utils-1.0.6-1.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p112548175/v102046/README changed HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 7 x86_64 HP QLogic qlcnic Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm software:rpm kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1012227063/v100572/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-hpqlgc-qlcnic-5.3.61.3-2.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1012227063/v100572/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1012227063/v100572/hp-qlgc-utils-1.0.6-1.noarch.rpm file://./hp/swpackages/hp-qlgc-utils-1.0.6-1.noarch.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1012227063/v100572/hp-qlgc-docs-1.0.6-1.noarch.rpm file://./hp/swpackages/hp-qlgc-docs-1.0.6-1.noarch.rpm changed HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 7 x86_64 HP Broadcom tg3 Ethernet Drivers for Red Hat Enterprise Linux 7 x86_64 Red Hat Enterprise Linux 7 Server Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm kmod-tg3-3.137e-3.rhel7u0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1868570322/v99913/kmod-tg3-3.137e-3.rhel7u0.x86_64.rpm file://./hp/swpackages/kmod-tg3-3.137e-3.rhel7u0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1868570322/v99913/README changed HP Fibre Channel Enablement Kit for Linux - Emulex HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) To install or upgrade the Enablement Kit rpm use the following command:
     
    # rpm -Uvh <Enablement-Kit-File-Name>.rpm
     
    NOTE: If an early version of the Enablement Kit is installed (a version prior to 6.x.x.x) it is strongly recommend that you uninstall the previous kit prior to installation of this rpm. To uninstall the Enablement Kit use the following command:
     
    # rpm –e <Enablement-Kit-Name>
     
    After uninstalling the previous kit, proceed with installation of the new kit as described above.

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
               http://ww.hp.com/storage/spock/
     

    ]]>         10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p338544545/v101663/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel7.x86_64.rpm file://./hp/swpackages/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.rhel7.x86_64.rpm     changed HP ProLiant Agentless Management Service for Red Hat Enterprise Linux 7 Server hp-ams Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.5.rhel7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p904411522/v105280/hp-ams-2.1.1-1594.5.rhel7.x86_64.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.5.rhel7.x86_64.rpm     changed HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 7 Server hp-health Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.28.rhel7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1001414930/v98547/hp-health-10.10-1710.28.rhel7.x86_64.rpm file://./hp/swpackages/hp-health-10.10-1710.28.rhel7.x86_64.rpm     changed HP SNMP Agents for Red Hat Enterprise Linux 7 Server hp-snmp-agents Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.28.rhel7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1549134605/v98554/hp-snmp-agents-10.10-2732.28.rhel7.x86_64.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.28.rhel7.x86_64.rpm     changed HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) cciss-kmp-4.6.28-24.sles11.i586.rpm Storage Server Driver - Storage Controller English (US) 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                      # rpm -Uvh cciss-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

                      Example: # rpm –Uvh cciss-kmp-default-4.6.28-20.sles11sp2.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                      Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                       # rpm -e cciss-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

    Source code available at http://sourceforge.net/projects/cciss/files/
     

     ]]>         0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 103C 3220 103C 3225 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 0E11 B060 0E11 4070 0E11 B060 0E11 4070 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm cciss-kmp-pae-4.6.28-24.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-pae-4.6.28-24.sles11sp3.i586.rpm file://./hp/swpackages/cciss-kmp-pae-4.6.28-24.sles11sp3.i586.rpm cciss-kmp-default-4.6.28-24.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-default-4.6.28-24.sles11sp2.i586.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp2.i586.rpm cciss-kmp-pae-4.6.28-24.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-pae-4.6.28-24.sles11sp1.i586.rpm file://./hp/swpackages/cciss-kmp-pae-4.6.28-24.sles11sp1.i586.rpm cciss-kmp-default-4.6.28-24.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-default-4.6.28-24.sles11sp1.i586.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp1.i586.rpm cciss-kmp-xen-4.6.28-24.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-xen-4.6.28-24.sles11sp1.i586.rpm file://./hp/swpackages/cciss-kmp-xen-4.6.28-24.sles11sp1.i586.rpm cciss-kmp-pae-4.6.28-24.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-pae-4.6.28-24.sles11sp2.i586.rpm file://./hp/swpackages/cciss-kmp-pae-4.6.28-24.sles11sp2.i586.rpm cciss-kmp-default-4.6.28-24.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p703723964/v105823/cciss-kmp-default-4.6.28-24.sles11sp3.i586.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp3.i586.rpm     changed HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) cciss-kmp-4.6.28-24.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                      # rpm -Uvh cciss-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

                      Example: # rpm –Uvh cciss-kmp-default-4.6.28-20.sles11sp2.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                      Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                       # rpm -e cciss-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Source code available at http://sourceforge.net/projects/cciss/files/
     

    ]]>         0E11 B178 0E11 4080 0E11 B178 0E11 4082 0E11 B060 0E11 4070 0E11 B178 0E11 4083 103C 3220 103C 3225 0E11 0046 0E11 409B 0E11 0046 0E11 409A 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 4091 0E11 B060 0E11 4070 0E11 B060 0E11 4070 103C 3230 103C 3235 103C 3238 103C 3211 103C 3238 103C 3212 103C 3230 103C 3234 103C 3230 103C 3223 103C 3230 103C 3237 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm cciss-kmp-xen-4.6.28-24.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-xen-4.6.28-24.sles11sp1.x86_64.rpm file://./hp/swpackages/cciss-kmp-xen-4.6.28-24.sles11sp1.x86_64.rpm cciss-kmp-default-4.6.28-24.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-default-4.6.28-24.sles11sp1.x86_64.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp1.x86_64.rpm cciss-kmp-xen-4.6.28-24.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-xen-4.6.28-24.sles11sp3.x86_64.rpm file://./hp/swpackages/cciss-kmp-xen-4.6.28-24.sles11sp3.x86_64.rpm cciss-kmp-default-4.6.28-24.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-default-4.6.28-24.sles11sp3.x86_64.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp3.x86_64.rpm cciss-kmp-default-4.6.28-24.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-default-4.6.28-24.sles11sp2.x86_64.rpm file://./hp/swpackages/cciss-kmp-default-4.6.28-24.sles11sp2.x86_64.rpm cciss-kmp-xen-4.6.28-24.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p297915520/v105824/cciss-kmp-xen-4.6.28-24.sles11sp2.x86_64.rpm file://./hp/swpackages/cciss-kmp-xen-4.6.28-24.sles11sp2.x86_64.rpm     changed HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) hpahcisr-1.2.6-17.sles11.i586.rpm Storage Server Driver - Storage Controller English (US) INSTALLATION

    Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. 

    To install or upgrade the driver type:

             # rpm -ivh hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

    Setup is now complete. REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

    The removal of the RPM restores the original hpahcisr.ko module and builds a new initrd image with the previous driver object module (if any) and adds yet another grub or lilo entry. You can then boot using this newest lilo or grub entry, (provided the building of the new initrd image goes well) or your original lilo or grub entry.

    The successful installation will replace the driver that shipped with SUSE LINUX Enterprise Server 11 with the  version of the driver, create a new Initial RAM Disk Image (initrd) that contains the hpahcisr-<version> version of the driver and modify /etc/lilo.conf (or /boot/grub/menu.lst) to allow the Linux Loader, lilo (or grub) to boot using the new ramdisk image.

    Backups of your previous files will be kept in the /usr/src/HP/driver_backup directory.

    The driver will be inserted in the Initial RAM Disk Image (initrd) and is automatically loaded every time the server boots, provided it is listed in /etc/modprobe.conf, which normally it is. 

    To load the module use the insmod command, type:

             # insmod hpahcisr

    Expect the following output if you have Symmetric Multi-Processing support enabled: 
             Using /lib/modules/`uname -r`/kernel/drivers/block/hpahcisr.o

    Expect the following output if you have a single processor server: 
             Using /lib/modules/`uname -r`/kernel/drivers/block/hpahcisr.o

    NOTE: You will experience error messages if the Smart Array controller is not installed. Ensure that the hardware is installed properly.

    NOTE: If the hardware is properly installed and you experience error messages loading the modules, remove the entire RPM by typing:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

    The removal of the RPM will restore the driver modules, and rebuild and initrd image for the running kernel and create appropriate entries in /etc/lilo.conf (or /boot/grub/menu.lst). Additionally you should still be able to
    boot using the previous entries still in /etc/lilo.conf or /boot/grub/menu.lst, provided the driver modules are restored, or were (and thus still are) in the initrd image. 

    To check whether the driver is loaded properly, type:

             # lsmod

    Expect to see the module name hpahcisr displayed. 

    If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and must be uninstalled by typing the following command:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm

    IMPORTANT: Additional instructions may be viewed:

             #rpm -q -i -p hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.i586.rpm | more 

    Read this section before proceeding.

    This RPM will install binary drivers that will only work with the default Linux SUSE LINUX Enterprise Server 11 kernel, and configuration that it has been built for. Earlier or later versions of SUSE LINUX Enterprise Server 11 are not supported. Special actions are required if you have modified the default kernel configuration that ships in the SUSE LINUX Enterprise Server 11 product. If you have modified the default kernel configuration you will need to rebuild the kernel to use the updated drivers after installing the RPM with the --noscripts option.

    The hpahcisr driver RPM will not install if it detects that your configuration is different from the SUSE LINUX Enterprise Server 11 default Server configuration.

    ]]>         8086 3A25 103C 3118 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpahcisr-kmp-default-1.2.6-17.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-default-1.2.6-17.sles11sp3.i586.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp3.i586.rpm hpahcisr-kmp-pae-1.2.6-17.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-pae-1.2.6-17.sles11sp1.i586.rpm file://./hp/swpackages/hpahcisr-kmp-pae-1.2.6-17.sles11sp1.i586.rpm hpahcisr-kmp-pae-1.2.6-17.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-pae-1.2.6-17.sles11sp2.i586.rpm file://./hp/swpackages/hpahcisr-kmp-pae-1.2.6-17.sles11sp2.i586.rpm hpahcisr-kmp-default-1.2.6-17.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-default-1.2.6-17.sles11sp2.i586.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp2.i586.rpm hpahcisr-kmp-default-1.2.6-17.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-default-1.2.6-17.sles11sp1.i586.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp1.i586.rpm hpahcisr-kmp-pae-1.2.6-17.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p363466461/v105826/hpahcisr-kmp-pae-1.2.6-17.sles11sp3.i586.rpm file://./hp/swpackages/hpahcisr-kmp-pae-1.2.6-17.sles11sp3.i586.rpm     changed HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hpahcisr-1.2.6-17.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) INSTALLATION

    Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. 

    To install or upgrade the driver type:

             # rpm -ivh hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    The removal of the RPM restores the original hpahcisr.ko module and builds a new initrd image with the previous driver object module (if any) and adds yet another grub or lilo entry. You can then boot using this newest lilo or grub entry, (provided the building of the new initrd image goes well) or your original lilo or grub entry.

    The successful installation will replace the driver that shipped with SUSE LINUX Enterprise Server 11 with the  version of the driver, create a new Initial RAM Disk Image (initrd) that contains the hpahcisr-<version> version of the driver and modify /etc/lilo.conf (or /boot/grub/menu.lst) to allow the Linux Loader, lilo (or grub) to boot using the new ramdisk image.

    Backups of your previous files will be kept in the /usr/src/HP/driver_backup directory.

    The driver will be inserted in the Initial RAM Disk Image (initrd) and is automatically loaded every time the server boots, provided it is listed in /etc/modprobe.conf, which normally it is. 

    To load the module use the insmod command, type:

             # insmod hpahcisr

    Expect the following output if you have Symmetric Multi-Processing support enabled: 
             Using /lib/modules/`uname -r`/kernel/drivers/block/hpahcisr.o

    Expect the following output if you have a single processor server: 
             Using /lib/modules/`uname -r`/kernel/drivers/block/hpahcisr.o

    NOTE: You will experience error messages if the Smart Array controller is not installed. Ensure that the hardware is installed properly.

    NOTE: If the hardware is properly installed and you experience error messages loading the modules, remove the entire RPM by typing:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    The removal of the RPM will restore the driver modules, and rebuild and initrd image for the running kernel and create appropriate entries in /etc/lilo.conf (or /boot/grub/menu.lst). Additionally you should still be able to
    boot using the previous entries still in /etc/lilo.conf or /boot/grub/menu.lst, provided the driver modules are restored, or were (and thus still are) in the initrd image. 

    To check whether the driver is loaded properly, type:

             # lsmod

    Expect to see the module name hpahcisr displayed. 

    If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and must be uninstalled by typing the following command:

             # rpm -e hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    IMPORTANT: Additional instructions may be viewed:

             rpm -q -i -p hpahcisr-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm | more 


    Read this section before proceeding.

    This RPM will install binary drivers that will only work with the default Linux SUSE LINUX Enterprise Server 11 kernel, and configuration that it has been built for. Earlier or later versions of SUSE LINUX Enterprise Server 11 are not supported. Special actions are required if you have modified the default kernel configuration that ships in the SUSE LINUX Enterprise Server 11 product. If you have modified the default kernel configuration you will need to rebuild the kernel to use the updated drivers after installing the RPM with the --noscripts option.

    The hpahcisr driver RPM will not install if it detects that your configuration is different from the SUSE LINUX Enterprise Server 11 default Server configuration.

    ]]>         8086 3A25 103C 3118 software:rpm software:rpm software:rpm hpahcisr-kmp-default-1.2.6-17.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1963166873/v105828/hpahcisr-kmp-default-1.2.6-17.sles11sp1.x86_64.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp1.x86_64.rpm hpahcisr-kmp-default-1.2.6-17.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1963166873/v105828/hpahcisr-kmp-default-1.2.6-17.sles11sp3.x86_64.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp3.x86_64.rpm hpahcisr-kmp-default-1.2.6-17.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1963166873/v105828/hpahcisr-kmp-default-1.2.6-17.sles11sp2.x86_64.rpm file://./hp/swpackages/hpahcisr-kmp-default-1.2.6-17.sles11sp2.x86_64.rpm     changed HP Dynamic Smart Array B140i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP Dynamic Smart Array B140i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hpdsa-kmp-1.2.2-145.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh hpdsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e hpdsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         8086 8D66 1590 009D 8086 8D06 1590 009C software:rpm software:rpm software:rpm hpdsa-kmp-trace-1.2.2-145.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p506834237/v100162/hpdsa-kmp-trace-1.2.2-145.sles11sp3.x86_64.rpm file://./hp/swpackages/hpdsa-kmp-trace-1.2.2-145.sles11sp3.x86_64.rpm hpdsa-kmp-xen-1.2.2-145.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p506834237/v100162/hpdsa-kmp-xen-1.2.2-145.sles11sp3.x86_64.rpm file://./hp/swpackages/hpdsa-kmp-xen-1.2.2-145.sles11sp3.x86_64.rpm hpdsa-kmp-default-1.2.2-145.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p506834237/v100162/hpdsa-kmp-default-1.2.2-145.sles11sp3.x86_64.rpm file://./hp/swpackages/hpdsa-kmp-default-1.2.2-145.sles11sp3.x86_64.rpm     changed HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 11 (x86) HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 11 (x86) LSI Logic Corporation SUSE LINUX Enterprise Server 11 (x86) lsi-mpt2sas-kmp-15.10.02.00-6.sles11.i586.rpm Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.i586.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    To upgrade the driver, type the following command:
    # rpm -Uvh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.i586.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.i586.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.i586.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.i586.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.i586.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp1.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp1.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp2.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp2.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp3.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-pae-15.10.02.00-6.sles11sp3.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.i586.rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.i586.rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p63993114/v105814/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.i586.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.i586.rpm     changed HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) LSI Logic Corporation SUSE LINUX Enterprise Server 11 (AMD64/EM64T) lsi-mpt2sas-kmp-15.10.02.00-6.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.x86_64.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    To upgrade the driver, type the following command:
    # rpm -Uvh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.x86_64.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and
    lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.x86_64.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp3.x86_64.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp1.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp2.x86_64.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.02.00-6.sles11sp2.x86_64.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp3.x86_64.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp2.x86_64.rpm lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-trace-15.10.02.00-6.sles11sp1.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp1.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p38121138/v105815/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.02.00-6.sles11sp3.x86_64.rpm     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) hpvsa-kmp-1.2.12-110.sles11.i586.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.i686.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.i686.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpvsa-kmp-pae-1.2.12-110.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-pae-1.2.12-110.sles11sp3.i586.rpm file://./hp/swpackages/hpvsa-kmp-pae-1.2.12-110.sles11sp3.i586.rpm hpvsa-kmp-trace-1.2.12-110.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-trace-1.2.12-110.sles11sp2.i586.rpm file://./hp/swpackages/hpvsa-kmp-trace-1.2.12-110.sles11sp2.i586.rpm hpvsa-kmp-default-1.2.12-110.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-default-1.2.12-110.sles11sp1.i586.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp1.i586.rpm hpvsa-kmp-pae-1.2.12-110.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-pae-1.2.12-110.sles11sp1.i586.rpm file://./hp/swpackages/hpvsa-kmp-pae-1.2.12-110.sles11sp1.i586.rpm hpvsa-kmp-trace-1.2.12-110.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-trace-1.2.12-110.sles11sp3.i586.rpm file://./hp/swpackages/hpvsa-kmp-trace-1.2.12-110.sles11sp3.i586.rpm hpvsa-kmp-default-1.2.12-110.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-default-1.2.12-110.sles11sp3.i586.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp3.i586.rpm hpvsa-kmp-default-1.2.12-110.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-default-1.2.12-110.sles11sp2.i586.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp2.i586.rpm hpvsa-kmp-pae-1.2.12-110.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-pae-1.2.12-110.sles11sp2.i586.rpm file://./hp/swpackages/hpvsa-kmp-pae-1.2.12-110.sles11sp2.i586.rpm hpvsa-kmp-xen-1.2.12-110.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p836468218/v100148/hpvsa-kmp-xen-1.2.12-110.sles11sp1.i586.rpm file://./hp/swpackages/hpvsa-kmp-xen-1.2.12-110.sles11sp1.i586.rpm     changed HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hpvsa-kmp-1.2.12-110.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpvsa-kmp-default-1.2.12-110.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-default-1.2.12-110.sles11sp2.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp2.x86_64.rpm hpvsa-kmp-xen-1.2.12-110.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-xen-1.2.12-110.sles11sp1.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-xen-1.2.12-110.sles11sp1.x86_64.rpm hpvsa-kmp-default-1.2.12-110.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-default-1.2.12-110.sles11sp1.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp1.x86_64.rpm hpvsa-kmp-xen-1.2.12-110.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-xen-1.2.12-110.sles11sp2.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-xen-1.2.12-110.sles11sp2.x86_64.rpm hpvsa-kmp-xen-1.2.12-110.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-xen-1.2.12-110.sles11sp3.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-xen-1.2.12-110.sles11sp3.x86_64.rpm hpvsa-kmp-trace-1.2.12-110.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-trace-1.2.12-110.sles11sp2.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-trace-1.2.12-110.sles11sp2.x86_64.rpm hpvsa-kmp-trace-1.2.12-110.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-trace-1.2.12-110.sles11sp3.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-trace-1.2.12-110.sles11sp3.x86_64.rpm hpvsa-kmp-default-1.2.12-110.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p354878170/v100150/hpvsa-kmp-default-1.2.12-110.sles11sp3.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles11sp3.x86_64.rpm     changed HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) hpsa-kmp-3.4.8-140.sles11.i586.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh kmod-hpsa-<version>.sles11.i686.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e kmod-hpsa-<version>.sles11.i686.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpsa-kmp-trace-3.4.8-140.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-trace-3.4.8-140.sles11sp3.i586.rpm file://./hp/swpackages/hpsa-kmp-trace-3.4.8-140.sles11sp3.i586.rpm hpsa-kmp-pae-3.4.8-140.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-pae-3.4.8-140.sles11sp1.i586.rpm file://./hp/swpackages/hpsa-kmp-pae-3.4.8-140.sles11sp1.i586.rpm hpsa-kmp-pae-3.4.8-140.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-pae-3.4.8-140.sles11sp3.i586.rpm file://./hp/swpackages/hpsa-kmp-pae-3.4.8-140.sles11sp3.i586.rpm hpsa-kmp-xen-3.4.8-140.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-xen-3.4.8-140.sles11sp1.i586.rpm file://./hp/swpackages/hpsa-kmp-xen-3.4.8-140.sles11sp1.i586.rpm hpsa-kmp-pae-3.4.8-140.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-pae-3.4.8-140.sles11sp2.i586.rpm file://./hp/swpackages/hpsa-kmp-pae-3.4.8-140.sles11sp2.i586.rpm hpsa-kmp-default-3.4.8-140.sles11sp1.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-default-3.4.8-140.sles11sp1.i586.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp1.i586.rpm hpsa-kmp-default-3.4.8-140.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-default-3.4.8-140.sles11sp3.i586.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp3.i586.rpm hpsa-kmp-trace-3.4.8-140.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-trace-3.4.8-140.sles11sp2.i586.rpm file://./hp/swpackages/hpsa-kmp-trace-3.4.8-140.sles11sp2.i586.rpm hpsa-kmp-default-3.4.8-140.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p720797542/v100128/hpsa-kmp-default-3.4.8-140.sles11sp2.i586.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp2.i586.rpm     changed HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hpsa-kmp-3.4.8-140.sles11.x86_64.rpm Storage Server Driver - Storage Controller English (US) your hard drive and change to that directory.

    To install or upgrade the driver type:


      # rpm -Uvh kmod-hpsa-<version>.sles11.x86_64.rpm  

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

      # rpm -e kmod-hpsa-<version>.sles11.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpsa-kmp-trace-3.4.8-140.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-trace-3.4.8-140.sles11sp3.x86_64.rpm file://./hp/swpackages/hpsa-kmp-trace-3.4.8-140.sles11sp3.x86_64.rpm hpsa-kmp-default-3.4.8-140.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-default-3.4.8-140.sles11sp2.x86_64.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp2.x86_64.rpm hpsa-kmp-default-3.4.8-140.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-default-3.4.8-140.sles11sp1.x86_64.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp1.x86_64.rpm hpsa-kmp-xen-3.4.8-140.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-xen-3.4.8-140.sles11sp2.x86_64.rpm file://./hp/swpackages/hpsa-kmp-xen-3.4.8-140.sles11sp2.x86_64.rpm hpsa-kmp-xen-3.4.8-140.sles11sp1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-xen-3.4.8-140.sles11sp1.x86_64.rpm file://./hp/swpackages/hpsa-kmp-xen-3.4.8-140.sles11sp1.x86_64.rpm hpsa-kmp-trace-3.4.8-140.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-trace-3.4.8-140.sles11sp2.x86_64.rpm file://./hp/swpackages/hpsa-kmp-trace-3.4.8-140.sles11sp2.x86_64.rpm hpsa-kmp-xen-3.4.8-140.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-xen-3.4.8-140.sles11sp3.x86_64.rpm file://./hp/swpackages/hpsa-kmp-xen-3.4.8-140.sles11sp3.x86_64.rpm hpsa-kmp-default-3.4.8-140.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p743685681/v100130/hpsa-kmp-default-3.4.8-140.sles11sp3.x86_64.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles11sp3.x86_64.rpm     changed HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 11 SP2 AMD64/EM64T) HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 11 SP2 AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) Login as root, download the RPMs to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using 3.0.13-0.27-default kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-default-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm

    If using 3.0.13-0.27-xen kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-xen-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm software:rpm mlnx-en-kmp-default-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p311746395/v104132/mlnx-en-kmp-default-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-default-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p311746395/v104132/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp2.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp2.x86_64.rpm mlnx-en-kmp-xen-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p311746395/v104132/mlnx-en-kmp-xen-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-xen-2.2_3.0.13_0.27-1.0.7.0.g0055740.sles11sp2.x86_64.rpm     changed HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 11 SP3 AMD64/EM64T) HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 11 SP3 AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) Login as root, download the RPMs to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using 3.0.76-0.11-default kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-default-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm

    If using 3.0.76-0.11-xen kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-xen-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15b3 1011 103C 1953 15b3 1011 103C 1954 15B3 1003 103C 17C9 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 801F 15B3 1007 103C 8020 software:rpm software:rpm software:rpm mlnx-en-kmp-default-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1024600557/v104133/mlnx-en-kmp-default-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-default-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1024600557/v104133/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp3.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles11sp3.x86_64.rpm mlnx-en-kmp-xen-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1024600557/v104133/mlnx-en-kmp-xen-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-xen-2.2_3.0.76_0.11-1.0.7.0.g0055740.sles11sp3.x86_64.rpm     changed Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

    ]]>         1077 2031 103C 1939 1077 2532 103C 338E 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 8021 103c 3348 1077 8021 103C 1957 software:rpm software:rpm hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1066258354/v101941/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1066258354/v101941/hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.x86_64.rpm     changed Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

    ]]>         1077 2031 103C 1939 1077 2532 103C 338E 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 8021 103c 3348 1077 8021 103C 1957 software:rpm software:rpm software:rpm hpqlgc-qla2xxx-kmp-pae-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p335372787/v101939/hpqlgc-qla2xxx-kmp-pae-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-pae-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p335372787/v101939/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p335372787/v101939/hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-default-8.07.00.16.11.3_k_3.0.76_0.11-2.sles11sp3.i586.rpm     changed Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586

    ]]>         10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm software:rpm software:rpm software:rpm elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408194956/v106309/elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408194956/v106309/elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm elx-lpfc-kmp-pae-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408194956/v106309/elx-lpfc-kmp-pae-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/elx-lpfc-kmp-pae-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p408194956/v106309/elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.i586.rpm     changed Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586

    ]]>         10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm software:rpm software:rpm elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1019488802/v106310/elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/elx-lpfc-kmp-xen-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1019488802/v106310/elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/elx-lpfc-kmp-default-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1019488802/v106310/elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/elx-lpfc-kmp-trace-10.2.477.17_3.0.76_0.11-1.sles11sp3.x86_64.rpm     changed HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 11 i586 HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 19A2 0710 103C 3344 19A2 0710 103C 184E 19A2 0710 103C 3345 19A2 0710 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 3314 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 337B 19a2 0700 103c 1746 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 14E4 168E 103C 1932 10DF 0720 103C 220A software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm be2net-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2net-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm be2net-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2net-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/README be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1379717543/v101455/be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm changed HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3340 19A2 0710 103C 3344 19A2 0710 103C 337B 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 184E 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 14E4 168E 103C 1932 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F software:rpm software:rpm software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p23142945/v101456/README be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p23142945/v101456/be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/be2net-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p23142945/v101456/be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/be2net-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p23142945/v101456/be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/be2net-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p23142945/v101456/be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/be2net-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm changed HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 11 i586 HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm be2iscsi-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2iscsi-kmp-pae-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm be2iscsi-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2iscsi-kmp-pae-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm file://./hp/swpackages/be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.i386.rpm be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm file://./hp/swpackages/be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.i386.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p154266413/v101450/README changed HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 software:rpm software:rpm software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224882434/v101451/README be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224882434/v101451/be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-xen-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224882434/v101451/be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-default-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224882434/v101451/be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-xen-10.2.477.6_3.0.13_0.27-1.sles11sp2.x86_64.rpm be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224882434/v101451/be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-default-10.2.477.6_3.0.76_0.11-1.sles11sp3.x86_64.rpm changed HP Intel e1000e Drivers for SUSE Linux Enterprise Server 11 i586 HP Intel e1000e Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/README hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm hp-e1000e-kmp-pae-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-pae-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-pae-3.2.2.1_3.0.76_0.11-3.sles11sp3.i586.rpm hp-e1000e-kmp-pae-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-pae-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-pae-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1332681032/v102297/hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.i586.rpm changed HP Intel e1000e Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Intel e1000e Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm software:rpm software:rpm software:rpm hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p893915559/v102298/hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-default-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p893915559/v102298/hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-default-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p893915559/v102298/hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-xen-3.2.2.1_3.0.13_0.27-3.sles11sp2.x86_64.rpm hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p893915559/v102298/hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-xen-3.2.2.1_3.0.76_0.11-3.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p893915559/v102298/README changed HP Intel igb Drivers for SUSE Linux Enterprise Server 11 i586 HP Intel igb Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hp-igb-kmp-pae-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-pae-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hp-igb-kmp-pae-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm hp-igb-kmp-pae-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-pae-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hp-igb-kmp-pae-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/README hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.i586.rpm hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1390240770/v102306/hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.i586.rpm changed HP Intel igb Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Intel igb Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm software:rpm software:rpm software:rpm hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1245471503/v102307/hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-default-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1245471503/v102307/hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-xen-5.2.15_3.0.13_0.27-2.sles11sp2.x86_64.rpm hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1245471503/v102307/hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-default-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1245471503/v102307/README hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1245471503/v102307/hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-xen-5.2.15_3.0.76_0.11-2.sles11sp3.x86_64.rpm changed HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 11 i586 HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/README hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm hp-ixgbe-kmp-pae-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-pae-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-pae-3.23.0.79_3.0.76_0.11-1.sles11sp3.i586.rpm hp-ixgbe-kmp-pae-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1962411821/v102313/hp-ixgbe-kmp-pae-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbe-kmp-pae-3.23.0.79_3.0.13_0.27-1.sles11sp2.i586.rpm changed HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm software:rpm software:rpm software:rpm hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p518172874/v102314/hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-xen-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p518172874/v102314/hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-default-3.23.0.79_3.0.13_0.27-1.sles11sp2.x86_64.rpm hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p518172874/v102314/hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-xen-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p518172874/v102314/hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-default-3.23.0.79_3.0.76_0.11-1.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p518172874/v102314/README changed HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 11 i586 HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/README hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm hp-ixgbevf-kmp-pae-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-pae-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-pae-2.16.0.43_3.0.13_0.27-1.sles11sp2.i586.rpm hp-ixgbevf-kmp-pae-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-pae-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-pae-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1777286581/v102318/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.i586.rpm changed HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm software:rpm software:rpm software:rpm hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p537263298/v102319/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p537263298/v102319/README hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p537263298/v102319/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-xen-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p537263298/v102319/hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-default-2.16.0.43_3.0.76_0.11-1.sles11sp3.x86_64.rpm hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p537263298/v102319/hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-default-2.16.0.43_3.0.13_0.27-1.sles11sp2.x86_64.rpm changed HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 11 i586 HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 1639 103C 7055 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/README netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm netxtreme2-kmp-pae-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-pae-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/netxtreme2-kmp-pae-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.i586.rpm netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm netxtreme2-kmp-pae-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1933382020/v105713/netxtreme2-kmp-pae-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/netxtreme2-kmp-pae-7.10.73_3.0.76_0.11-1.sles11sp3.i586.rpm changed HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16AD 103C 22FA 14E4 16A4 103C 22FA 14E4 1639 103C 7055 software:rpm software:rpm software:rpm software:rpm netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p943683902/v105714/netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-default-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p943683902/v105714/netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-default-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p943683902/v105714/netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-xen-7.10.73_3.0.76_0.11-1.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p943683902/v105714/README netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p943683902/v105714/netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-xen-7.10.73_3.0.13_0.27-1.sles11sp2.x86_64.rpm changed HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 11 i586 HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hp-nx_nic-docs-1.0.5-2.noarch.rpm hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.13_0.27-1.sles11sp2.i586.rpm hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-pae-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p400291921/v100566/README changed HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 11 x86_64 HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm software:rpm software:rpm hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/README hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hp-nx_nic-docs-1.0.5-2.noarch.rpm hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-xen-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.13_0.27-1.sles11sp2.x86_64.rpm hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p322959406/v100567/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-default-4.0.596.1_3.0.76_0.11-1.sles11sp3.x86_64.rpm changed HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 11 i586 HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 1077 8022 103C 3347 1077 8022 103C 1957 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hp-qlgc-utils-1.0.6-1.noarch.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hp-qlgc-docs-1.0.6-1.noarch.rpm hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2132414227/v102047/hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-pae-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.i586.rpm changed HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 11 x86_64 HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 1077 8022 103C 3347 1077 8022 103C 1957 software:rpm software:rpm software:rpm software:rpm hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hp-qlgc-docs-1.0.6-1.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hp-qlgc-utils-1.0.6-1.noarch.rpm hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.13_0.27-1.sles11sp2.x86_64.rpm hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p139260028/v102048/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_3.0.76_0.11-1.sles11sp3.x86_64.rpm changed HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 11 i586 HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-pae-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hp-qlgc-docs-1.0.6-1.noarch.rpm hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.i586.rpm hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1247995359/v100573/hp-qlgc-utils-1.0.6-1.noarch.rpm changed HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 11 x86_64 HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm software:rpm software:rpm hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hp-qlgc-utils-1.0.6-1.noarch.rpm hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/README hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.76_0.11-2.sles11sp3.x86_64.rpm hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-default-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-xen-5.3.61.3_3.0.13_0.27-2.sles11sp2.x86_64.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p48132612/v100574/hp-qlgc-docs-1.0.6-1.noarch.rpm changed HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 11 i586 HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 11 i586 SUSE LINUX Enterprise Server 11 (x86) Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 software:rpm software:rpm software:rpm software:rpm software:rpm software:rpm tg3-kmp-pae-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-pae-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/tg3-kmp-pae-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm tg3-kmp-pae-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-pae-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/tg3-kmp-pae-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/README tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm file://./hp/swpackages/tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.i586.rpm tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1418278682/v99914/tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm file://./hp/swpackages/tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.i586.rpm changed HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 11 x86_64 HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 11 x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm software:rpm software:rpm software:rpm tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1939098852/v99915/tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm file://./hp/swpackages/tg3-kmp-xen-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1939098852/v99915/tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm file://./hp/swpackages/tg3-kmp-default-3.137e_3.0.76_0.11-3.sles11sp3.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1939098852/v99915/README tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1939098852/v99915/tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm file://./hp/swpackages/tg3-kmp-default-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1939098852/v99915/tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm file://./hp/swpackages/tg3-kmp-xen-3.137e_3.0.13_0.27-3.sles11sp2.x86_64.rpm changed HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (x86) hp-health Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) hp-health-10.1.0-%build.version_subst%.sles11.i386.rpm Storage Server Software - System Management English (US) To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.31.sles11.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p958496136/v98548/hp-health-10.10-1710.31.sles11.i586.rpm file://./hp/swpackages/hp-health-10.10-1710.31.sles11.i586.rpm     changed HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hp-health Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hp-health-10.1.0-%build.version_subst%.sles11.x86_64.rpm Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.29.sles11.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p44607894/v98549/hp-health-10.10-1710.29.sles11.x86_64.rpm file://./hp/swpackages/hp-health-10.10-1710.29.sles11.x86_64.rpm     changed HP SNMP Agents for SUSE LINUX Enterprise Server 11 (x86) hp-snmp-agents Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) hp-snmp-agents-10.1.0-%build.version_subst%.sles11.i386.rpm Storage Server Software - System Management English (US) To get the list of all dependency files for hp-snmp-agents type:

    rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.28.sles11.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p221173740/v98555/hp-snmp-agents-10.10-2732.28.sles11.i586.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.28.sles11.i586.rpm     changed HP SNMP Agents for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hp-snmp-agents Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hp-snmp-agents-10.1.0-%build.version_subst%.sles11.x86_64.rpm Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.26.sles11.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1836975114/v98556/hp-snmp-agents-10.10-2732.26.sles11.x86_64.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.26.sles11.x86_64.rpm     changed HP ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 11 (x86) hp-ams Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.4.sles11.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1857137787/v105285/hp-ams-2.1.1-1594.4.sles11.i586.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.4.sles11.i586.rpm     changed HP ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) hp-ams Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.4.sles11.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p390745818/v105284/hp-ams-2.1.1-1594.4.sles11.x86_64.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.4.sles11.x86_64.rpm     changed HP Fibre Channel Enablement Kit for Linux - Emulex HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) To install or upgrade the Enablement Kit rpm use the following command:
     
    # rpm -Uvh <Enablement-Kit-File-Name>.rpm
     
    NOTE: If an early version of the Enablement Kit is installed (a version prior to 6.x.x.x) it is strongly recommend that you uninstall the previous kit prior to installation of this rpm. To uninstall the Enablement Kit use the following command:
     
    # rpm –e <Enablement-Kit-Name>
     
    After uninstalling the previous kit, proceed with installation of the new kit as described above.

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
               http://ww.hp.com/storage/spock/
     

    ]]>         10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF F100 103C 2238 software:rpm HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p514910651/v101496/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.i386.rpm file://./hp/swpackages/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.i386.rpm     changed HP Fibre Channel Enablement Kit for Linux - Emulex HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) To install or upgrade the Enablement Kit rpm use the following command:
     
    # rpm -Uvh <Enablement-Kit-File-Name>.rpm
     
    NOTE: If an early version of the Enablement Kit is installed (a version prior to 6.x.x.x) it is strongly recommend that you uninstall the previous kit prior to installation of this rpm. To uninstall the Enablement Kit use the following command:
     
    # rpm –e <Enablement-Kit-Name>
     
    After uninstalling the previous kit, proceed with installation of the new kit as described above.

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
               http://ww.hp.com/storage/spock/
     

    ]]>         10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1019568926/v101495/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.x86_64.rpm file://./hp/swpackages/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles11.x86_64.rpm     new HP Dynamic Smart Array B140i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) HP Dynamic Smart Array B140i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 hpdsa-kmp-1.2.2-145.sles12.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh hpdsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e hpdsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         8086 8D66 1590 009D 8086 8D06 1590 009C software:rpm software:rpm hpdsa-kmp-default-1.2.2-145.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1168619056/v100164/hpdsa-kmp-default-1.2.2-145.sles12sp0.x86_64.rpm file://./hp/swpackages/hpdsa-kmp-default-1.2.2-145.sles12sp0.x86_64.rpm hpdsa-kmp-xen-1.2.2-145.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1168619056/v100164/hpdsa-kmp-xen-1.2.2-145.sles12sp0.x86_64.rpm file://./hp/swpackages/hpdsa-kmp-xen-1.2.2-145.sles12sp0.x86_64.rpm     new HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 hpsa-kmp-3.4.8-140.sles12.x86_64.rpm Storage Server Driver - Storage Controller English (US) your hard drive and change to that directory.

    To install or upgrade the driver type:


      # rpm -Uvh kmod-hpsa-<version>.sles12.x86_64.rpm  

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

      # rpm -e kmod-hpsa-<version>.sles12.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    Source code available at http://sourceforge.net/projects/cciss/files/

    ]]>         103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca software:rpm software:rpm hpsa-kmp-xen-3.4.8-140.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1492549857/v100132/hpsa-kmp-xen-3.4.8-140.sles12sp0.x86_64.rpm file://./hp/swpackages/hpsa-kmp-xen-3.4.8-140.sles12sp0.x86_64.rpm hpsa-kmp-default-3.4.8-140.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1492549857/v100132/hpsa-kmp-default-3.4.8-140.sles12sp0.x86_64.rpm file://./hp/swpackages/hpsa-kmp-default-3.4.8-140.sles12sp0.x86_64.rpm     new HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 hpvsa-1.2.12-110.sles12.x86_64.rpm Storage Server Driver - Storage Controller English (US) Login as the system administrator (root), download the RPM to a directory on
    your hard drive and change to that directory.

    To install or upgrade the driver type:

    # rpm -Uvh hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Setup is now complete. Please REBOOT your computer NOW!!

    NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm

    Customer Service
    For support for ProLiant Smart Array controllers, please visit
    http://welcome.hp.com/country/us/en/contact_us.html

    ]]>         1590 0045 1590 0045 1590 0047 1590 0047 8086 1D04 1590 0048 8086 1C04 1590 006C 8086 8C04 1590 0084 software:rpm software:rpm hpvsa-kmp-xen-1.2.12-110.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p138789950/v100152/hpvsa-kmp-xen-1.2.12-110.sles12sp0.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-xen-1.2.12-110.sles12sp0.x86_64.rpm hpvsa-kmp-default-1.2.12-110.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p138789950/v100152/hpvsa-kmp-default-1.2.12-110.sles12sp0.x86_64.rpm file://./hp/swpackages/hpvsa-kmp-default-1.2.12-110.sles12sp0.x86_64.rpm     new HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) HP H2xx SAS/SATA Host Bus Adapter Driver for SUSE LINUX Enterprise Server 12 (AMD64/EM64T) LSI Logic Corporation SUSE Linux Enterprise Server 12 Storage Server Driver - Storage Controller English (US) To install the driver, type the following command:
    # rpm -ivh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles12.x86_64.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    To upgrade the driver, type the following command:
    # rpm -Uvh lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles12.x86_64.rpm (x.x.x.x-x represents the version number and KKKKK represents the kernel like default,xen,smp etc.)

    A REBOOT is required for your computer when the setup is complete.

    Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and
    lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles12.x86_64.rpm after the OS has completed its installation process and system has rebooted.

    ]]>         1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 software:rpm software:rpm lsi-mpt2sas-kmp-default-15.10.04.00-3.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p619339891/v105816/lsi-mpt2sas-kmp-default-15.10.04.00-3.sles12.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-default-15.10.04.00-3.sles12.x86_64.rpm lsi-mpt2sas-kmp-xen-15.10.04.00-3.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p619339891/v105816/lsi-mpt2sas-kmp-xen-15.10.04.00-3.sles12.x86_64.rpm file://./hp/swpackages/lsi-mpt2sas-kmp-xen-15.10.04.00-3.sles12.x86_64.rpm     new HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 12 AMD64/EM64T) HP Mellanox EN Driver for InfiniBand adapters (SUSE LINUX Enterprise Server 12 AMD64/EM64T) Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) Login as root, download the RPMs to a directory on your hard drive and change to that directory.
    Note: Irrespective of the kernel version or type used, the "mlnx-en-utils" RPM must be installed prior to installing the driver binary RPM to meet the install dependency.

    To install or upgrade the driver:

    If using 3.12.28-4-default kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-default-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm

    If using 3.12.28-4-xen kernel or any future errata:

    # rpm -Uvh mlnx-en-kmp-xen-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.
     

    ]]>         15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15b3 1011 103C 1953 15b3 1011 103C 1954 15B3 1003 103C 17C9 15b3 1011 103C 1955 15B3 1003 103C 1988 15B3 1007 103C 2160 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15b3 1007 103C 22F2 15B3 1007 103C 8020 15B3 1007 103C 801F software:rpm software:rpm software:rpm mlnx-en-kmp-default-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p966727082/v104134/mlnx-en-kmp-default-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-default-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm mlnx-en-kmp-xen-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p966727082/v104134/mlnx-en-kmp-xen-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm file://./hp/swpackages/mlnx-en-kmp-xen-2.2_k3.12.28_4-1.0.7.0.g0055740.sles12sp0.x86_64.rpm mlnx-en-utils-2.2-1.0.7.0.g0055740.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p966727082/v104134/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles12sp0.x86_64.rpm file://./hp/swpackages/mlnx-en-utils-2.2-1.0.7.0.g0055740.sles12sp0.x86_64.rpm     new Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP Emulex CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                        # rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm

                        Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586

    ]]>         10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm software:rpm elx-lpfc-kmp-default-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1197775589/v106311/elx-lpfc-kmp-default-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/elx-lpfc-kmp-default-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm elx-lpfc-kmp-xen-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1197775589/v106311/elx-lpfc-kmp-xen-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/elx-lpfc-kmp-xen-10.2.477.17_3.12.28_4-1.sles12sp0.x86_64.rpm     new Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 ServerOptions Networking Storage Driver - Storage Fibre Channel English (US), Japanese 1. Login as the system administrator (root).

    2. Download the RPM to a directory on your hard drive and change to that directory.

    3. To install or upgrade the driver, type the following command at the prompt:

                         # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                        Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

    4. When the installation or upgrade is complete, the following message displays:

                        Setup is now complete. Please REBOOT your computer NOW!!

    IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                        # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

    ]]>         1077 2031 103C 1939 1077 2532 103C 338E 1077 2532 103C 3261 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 8021 103c 3348 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103C 1957 software:rpm software:rpm hpqlgc-qla2xxx-kmp-default-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p191600458/v103558/hpqlgc-qla2xxx-kmp-default-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-default-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm hpqlgc-qla2xxx-kmp-xen-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p191600458/v103558/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qla2xxx-kmp-xen-8.07.00.16.12.0_k_k3.12.28_4-3.sles12sp0.x86_64.rpm     new HP Broadcom Linux iSCSI Offload IO Daemon for SUSE Linux Enterprise Server 12 x86_64 HP Broadcom Linux iSCSI Offload IO Daemon for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 1639 103C 7059 14E4 1639 103C 7055 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 1650 103C 3654 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 3382 14E4 168E 103C 1798 14E4 168E 103C 17A5 14E4 168E 103C 339D 14E4 168E 103C 18D3 14E4 168E 103C 193A 14E4 16A2 103C 22FA software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1456583542/v101277/README iscsiuio-2.10.0.0-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1456583542/v101277/iscsiuio-2.10.0.0-1.sles12sp0.x86_64.rpm file://./hp/swpackages/iscsiuio-2.10.0.0-1.sles12sp0.x86_64.rpm new HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Emulex 10/20 GbE iSCSI Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 19a2 0702 103c 3314 19A2 0712 103C 3345 19A2 0712 103C 3315 19A2 0712 103C 3344 19A2 0712 103C 337B 19A2 0712 103C 337C 19A2 0712 103C 3376 10DF 0722 103C 220A 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 21D4 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2091118213/v102500/README be2iscsi-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2091118213/v102500/be2iscsi-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm be2iscsi-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2091118213/v102500/be2iscsi-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/be2iscsi-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm new HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Emulex 10/20 GbE Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 19a2 0700 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3345 19A2 0710 103C 3341 19A2 0710 103C 3315 19A2 0710 103C 3340 19A2 0710 103C 3344 19A2 0710 103C 337B 19A2 0710 103C 337C 19A2 0710 103C 3376 19A2 0710 103C 184E 19A2 0718 103C 3344 19A2 0718 103C 184E 19A2 0718 103C 3345 19A2 0718 103C 3315 19A2 0718 103C 3341 19A2 0718 103C 3340 19A2 0718 103C 337C 19A2 0718 103C 3376 19A2 0718 103C 337B 14E4 168E 103C 1932 10DF 0720 103C 220A 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 21D4 10DF 0720 103C 803F 10DF 0728 103C 803F software:rpm software:rpm be2net-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1712603057/v102501/be2net-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/be2net-kmp-xen-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1712603057/v102501/README be2net-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1712603057/v102501/be2net-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/be2net-kmp-default-10.2.477.6_k3.12.28_4-1.sles12sp0.x86_64.rpm new HP Intel e1000e Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Intel e1000e Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 8086 10D3 103C 3250 8086 10D3 103C 1785 8086 10DA 103C 1717 8086 10D9 103C 1716 software:rpm software:rpm hp-e1000e-kmp-xen-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p438039743/v102299/hp-e1000e-kmp-xen-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-xen-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm hp-e1000e-kmp-default-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p438039743/v102299/hp-e1000e-kmp-default-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-e1000e-kmp-default-3.2.2.1_k3.12.28_4-3.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p438039743/v102299/README new HP Intel igb Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Intel igb Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 150e 103c 1780 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p434520913/v102308/README hp-igb-kmp-default-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p434520913/v102308/hp-igb-kmp-default-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-default-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm hp-igb-kmp-xen-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p434520913/v102308/hp-igb-kmp-xen-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-igb-kmp-xen-5.2.15_k3.12.28_4-2.sles12sp0.x86_64.rpm new HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Intel ixgbe Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 10FB 103C 2159 software:rpm software:rpm hp-ixgbe-kmp-default-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1999511391/v102320/hp-ixgbe-kmp-default-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-default-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1999511391/v102320/README hp-ixgbe-kmp-xen-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1999511391/v102320/hp-ixgbe-kmp-xen-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-ixgbe-kmp-xen-3.23.0.79_k3.12.28_4-1.sles12sp0.x86_64.rpm new HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Intel ixgbevf Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 8086 1528 103C 211A 8086 10FB 103C 2159 software:rpm software:rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p396353159/v102321/README hp-ixgbevf-kmp-default-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p396353159/v102321/hp-ixgbevf-kmp-default-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-default-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm hp-ixgbevf-kmp-xen-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p396353159/v102321/hp-ixgbevf-kmp-xen-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/hp-ixgbevf-kmp-xen-2.16.0.43_k3.12.28_4-1.sles12sp0.x86_64.rpm new HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Broadcom 1/10/20 GbE Multifunction Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 168E 103C 18D3 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 16A2 103C 1916 14E4 16A2 103C 1917 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16AD 103C 22FA 14E4 16A4 103C 22FA 14E4 1639 103C 7055 software:rpm software:rpm netxtreme2-kmp-default-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1065762911/v100898/netxtreme2-kmp-default-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-default-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1065762911/v100898/README netxtreme2-kmp-xen-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1065762911/v100898/netxtreme2-kmp-xen-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm file://./hp/swpackages/netxtreme2-kmp-xen-7.10.73_k3.12.28_4-1.sles12sp0.x86_64.rpm new HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 12 x86_64 HP QLogic nx_nic Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 4040 0100 103c 1740 4040 0100 103C 705A software:rpm software:rpm hpqlgc-nx_nic-kmp-xen-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p158020999/v100568/hpqlgc-nx_nic-kmp-xen-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-xen-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm hp-nx_nic-tools-4.0.596.1-3.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p158020999/v100568/hp-nx_nic-tools-4.0.596.1-3.noarch.rpm hp-nx_nic-docs-1.0.5-2.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p158020999/v100568/hp-nx_nic-docs-1.0.5-2.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p158020999/v100568/README hpqlgc-nx_nic-kmp-default-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p158020999/v100568/hpqlgc-nx_nic-kmp-default-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-nx_nic-kmp-default-4.0.596.1_k3.12.28_4-3.sles12sp0.x86_64.rpm new HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 12 x86_64 HP QLogic iSCSI Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 1077 8022 103C 3347 1077 8022 103C 1957 software:rpm software:rpm hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1947677199/v100569/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-default-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1947677199/v100569/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qla4xxx-kmp-xen-5.04.01.09.00.00_k0_k3.12.28_4-2.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1947677199/v100569/README hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1947677199/v100569/hp-qlgc-utils-1.0.6-1.noarch.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1947677199/v100569/hp-qlgc-docs-1.0.6-1.noarch.rpm new HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 12 x86_64 HP QLogic qlcnic Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 software:rpm software:rpm hpqlgc-qlcnic-kmp-default-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1493959981/v100575/hpqlgc-qlcnic-kmp-default-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-default-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm hpqlgc-qlcnic-kmp-xen-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1493959981/v100575/hpqlgc-qlcnic-kmp-xen-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm file://./hp/swpackages/hpqlgc-qlcnic-kmp-xen-5.3.61.3_k3.12.28_4-2.sles12sp0.x86_64.rpm hp-qlgc-docs-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1493959981/v100575/hp-qlgc-docs-1.0.6-1.noarch.rpm hp-qlgc-utils-1.0.6-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1493959981/v100575/hp-qlgc-utils-1.0.6-1.noarch.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1493959981/v100575/README new HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 12 x86_64 HP Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 12 x86_64 SUSE Linux Enterprise Server 12 Networking Server Driver - Network English (US) 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 1665 103C 22BD 14E4 1657 103C 22BE software:rpm software:rpm tg3-kmp-xen-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p789030580/v99917/tg3-kmp-xen-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/tg3-kmp-xen-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm tg3-kmp-default-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p789030580/v99917/tg3-kmp-default-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm file://./hp/swpackages/tg3-kmp-default-3.137e_k3.12.28_4-3.sles12sp0.x86_64.rpm README http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p789030580/v99917/README new HP ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 12 hp-ams Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 Lights Out Storage Server Software - System Management English (US)
  • hp-ams only supported on HP ProLiant Gen8 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         software:rpm hp-ams-2.1.1-1594.4.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1281392312/v105283/hp-ams-2.1.1-1594.4.sles12.x86_64.rpm file://./hp/swpackages/hp-ams-2.1.1-1594.4.sles12.x86_64.rpm     new HP Fibre Channel Enablement Kit for Linux - Emulex HP Fibre Channel Enablement Kit Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 ServerOptions Networking Storage Software - Storage Fibre Channel HBA English (US) To install or upgrade the Enablement Kit rpm use the following command:
     
    # rpm -Uvh <Enablement-Kit-File-Name>.rpm
     
    NOTE: If an early version of the Enablement Kit is installed (a version prior to 6.x.x.x) it is strongly recommend that you uninstall the previous kit prior to installation of this rpm. To uninstall the Enablement Kit use the following command:
     
    # rpm –e <Enablement-Kit-Name>
     
    After uninstalling the previous kit, proceed with installation of the new kit as described above.

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
               http://ww.hp.com/storage/spock/
     

    ]]>         10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF FE00 103C 1708 10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 software:rpm HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1152240858/v102870/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles12.x86_64.rpm file://./hp/swpackages/HP-CNA-FC-Emulex-Enablement-Kit-10.2.477.10-1.sles12.x86_64.rpm     new HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 12 hp-health Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         software:rpm hp-health-10.10-1710.34.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p9791069/v98550/hp-health-10.10-1710.34.sles12.x86_64.rpm file://./hp/swpackages/hp-health-10.10-1710.34.sles12.x86_64.rpm     new HP SNMP Agents for SUSE LINUX Enterprise Server 12 hp-snmp-agents Hewlett-Packard Development Company, L.P. SUSE Linux Enterprise Server 12 Storage Server Software - System Management English (US) The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         software:rpm hp-snmp-agents-10.10-2732.34.sles12.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p514379119/v98557/hp-snmp-agents-10.10-2732.34.sles12.x86_64.rpm file://./hp/swpackages/hp-snmp-agents-10.10-2732.34.sles12.x86_64.rpm     new Firmware CD Supplemental Update / Online ROM Flash Component for Linux - HP Integrated Lights-Out 2 HP Integrated Lights-Out 2 Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 5 Desktop (x86) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP025666.scexe Lights Out Server Firmware - Lights-Out Management English (US) To update firmware from the Linux operating system on target server:
    Download the SCEXE file to the target server.
    Execute: sh CP0XXXXX.scexe

    To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
    Download the SCEXE file to a client running a Linux operating system.  Execute: sh CP0XXXXX.scexe--unpack=directory
    This command will unpack the ilo2_xxx.bin into a user specified "directory". If the directory does not exist, the unpacker will attempt to create it.

    To use HP Smart Update Manager on the Firmware Maintenance CD version 7.50 and later:
    Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility. 
    Copy CP0XXXXX.scexe to /compaq/swpackages directory on the USB Key.
    Follow HP Smart Update Manager steps to complete firmware update.

    ]]>         firmware:ilo2 0E11 B204 103C 3304 0E11 B204 103C 3305 sh CP025666.scexe CP025666.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p915269625/v104866/CP025666.scexe file://./hp/swpackages/CP025666.scexe     changed Firmware CD Supplemental Update / Online ROM Flash Component for Linux - HP Integrated Lights-Out 3 HP Integrated Lights-Out 3 Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) VMware ESX/ESXi Server 3.5 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 5 Desktop (x86) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP025437.scexe Lights Out Server Firmware - Lights-Out Management English (US)
    Linux:      ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1255562964/v64722
    Windows: ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p901462262/v64721
    Win64:     ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v64720]]>         Update via Online Linux Environment:
    To update firmware from the Linux operating system on target server:

    1. Download the SCEXE file to the target server. 
    2. Run: sh CP019815.scexe

    Update via iLO GUI, Utilities, or Scripting Interface:
    To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:

    1. Download the SCEXE file to a client running a Linux operating system. 
    2. Run: sh CP019815.scexe  --unpack=directory. 
      This command will unpack the iLO3 bin into a user specified "directory".  If the directory does not exist, the unpacker will attempt to create it.

    Update via HP Support Pack for ProLiant:
    To use HP Smart Update Manager (HP SUM) from the HP Service Pack for ProLiant (SPP):

    Offline:

    1. Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2. Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    3. Boot from the newly created HP Service Pack for ProLiant USB key.
    4. Follow HP Smart Update Manager steps to complete firmware update.

    NOTE: Use Offline mode to update systems running VMware ESXi 4.0 or ESXi 4.1.

    Online:

    1. Login as root. (You must be root in order to apply the ROM update.)
    2. Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages.
    3. Locate Start.html which is found in the root of the ISO.
    4. Open the html file in a supported browser.
    5. Follow the instructions on the screen to complete the firmware update.
    ]]>         firmware:ilo3 103c 3307 103c 3309 103c 3307 103c 330e sh CP019815.scexe CP025437.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1573561412/v104114/CP025437.scexe file://./hp/swpackages/CP025437.scexe     changed Firmware CD Supplemental Update / Online ROM Flash Component for Linux - HP Integrated Lights-Out 4 HP Integrated Lights-Out 4 Hewlett-Packard Development Company, L.P. Microsoft Windows XP Professional Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Vista (32-bit) Microsoft Windows Vista (64-bit) Microsoft Windows XP Professional x64 Edition SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Storage Server 2008 Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) VMware ESX/ESXi 4.0 Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 6 Workstation (x86) SUSE Linux Enterprise Server 12 CP024538.scexe Lights Out Server Firmware - Lights-Out Management English (US)   of the iLO utilities:
     
      • HPQLOCFG 1.3.0 (replaced CPQLOCFG)
      • HP Lights-Out XML Scripting Sample 4.50 bundle
      • HPONCFG 4.5.0.0 (Windows)
      • HPONCFG 4.4.0.0 (Linux)
      • LOCFG.PL 4.50 (included in the HP Lights-Out XML Scripting Sample bundle)
      • HPLOMIG 4.50 (upgrade HPLOMIG before installing this version of iLO 4)
    ]]>         To update firmware from the Linux operating system on target server:
    Download the SCEXE file to the target server.
    Execute: sh CP0xxxxx.scexe

     To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
    Download the SCEXE file to a client running a Linux operating system.  Execute: sh  CP0xxxxx.scexe --unpack=directory
    This command will unpack the ilo4_1XX.bin into a user specified "directory". If the directory does not exist, the unpacker will attempt to create it.

    To use HP Smart Update Manager on the Firmware Maintenance CD:
    Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility. 
    Copy  CP0xxxxx.scexe to /compaq/swpackages directory on the USB Key.
    Follow HP Smart Update Manager steps to complete firmware update.

    ]]>          

    iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

    http://www.hp.com/go/ilo

    Select your lights-out product, then support & documents, then manuals.

    • Check the online help for additional information about how to use features. 
      Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
    ]]>         firmware:ilo4 103C 3307 103C 3381 103C 3306 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 sh CP024538.scexe hp-firmware-ilo4-2.10-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1950562118/v101195/hp-firmware-ilo4-2.10-1.1.i386.rpm file://./hp/swpackages/hp-firmware-ilo4-2.10-1.1.i386.rpm CP024538.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1950562118/v101195/CP024538.scexe file://./hp/swpackages/CP024538.scexe     changed HP Broadcom Online Firmware Upgrade Utility for Linux x86 HP Broadcom Online Firmware Upgrade Utility for Linux x86 SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) CP023984.scexe Networking Server Firmware - Network English (US)
    This package requires the appropriate driver for your network adapter be installed and all Ethernet ports brought up (ifup ethX or ifconfig ethX up) before firmware can be updated.

    This package requires the appropriate driver version for your network adapter be installed before firmware can be updated. This package requires at least one of the following, as applicable:
    • HP Broadcom tg3 Ethernet Driver RPM version 3.137e-3 or later
    • HP Broadcom 1/10/20GbE Multifunction Drivers RPM version 7.10.73-1 or later

     

    ]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/i386-linux-gnu' location.

    • The CP023984.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP023984.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP023984.scexe in the '/usr/lib/i386-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved in the "nicfwupg.log" file  located where the smart component was executed.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/i386-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the "nicfwupg.log" file, located where the smart component was executed.

    Additional Information:
    • The device ID in NPAR (NIC Partitioning) mode is different from the device ID used for Flex10, or (forced) Single Function mode.  For example, adapter device IDs '0x168E' and '0x16A2' become '0x16AE' and '0x16A4,' respectively, after enabling NPAR.
    • Network connectivity may stop during the firmware upgrade process and may need to be restarted after completion.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>
    NIC Boot Code Version PXE Version CLP Version iSCSI Version IPMI Version NCSI Version FCoE Version UEFI Version CCM Version L2 Version
    HP NC107i PCIe Gigabit Server Adapter 3.35 n/a n/a n/a 8.07 n/a n/a n/a n/a n/a
    HP NC325m PCIe Quad Port Gigabit Server Adapter 3.28 n/a 1.3.6 n/a n/a n/a n/a n/a n/a n/a
    HP Ethernet 1Gb 2-port 330i Adapter (18D2) 1.61 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331FLR Adapter
    HP Ethernet 1Gb 4-port 331T Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331i Adapter (3372)
    HP Ethernet 1Gb 4-port 331i-SPI Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332i Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332T Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP NC373F PCIe Multifunction Gigabit Server Adapter
    HP NC373T PCIe Multifunction Gigabit Server Adapter    		 1.9.6 2.8.5 n/a n/a n/a n/a n/a n/a n/a n/a
    HP NC382i DP Multifunction Gigabit Server Adapter 5.2.3 n/a n/a 7.4.2 n/a 2.0.12 n/a n/a n/a n/a
    HP NC382m DP 1GbE Multifunction BL-c Adapter 5.2.3 4.6.10 n/a 3.1.7 n/a n/a n/a n/a n/a n/a
    HP NC382T PCIe DP Multifunction Gigabit Server Adapter 5.2.3 5.2.4 n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP Flex-10 10Gb 2-port 530FLB Adapter
    HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
    HP Flex-10 10Gb 2-port 530M Adapter
    HP Ethernet 10Gb 2-port 530SFP+ Adapter
    HP Ethernet 10Gb 2-port 530T Adapter    		 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) 6.2.28 n/a n/a 3.1.5 n/a n/a n/a n/a n/a n/a
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) 6.2.28 n/a n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP NC532m Dual Port 10GbE Multifunction BL-c Adapter 6.2.28 7.0.53 n/a 7.4.2 n/a n/a n/a n/a n/a n/a
    HP Ethernet 10Gb 2-port 533FLR-T Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP FlexFabric 10Gb 2-port 534FLB Adapter
    HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
    HP FlexFabric 10Gb 2-port 534M Adapter
    HP StoreFabric CN1100R Dual Port Converged Network Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31
    HP FlexFabric 20Gb 2-port 630FLB Adapter
    HP FlexFabric 20Gb 2-port 630M Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31

    ]]>         firmware:NIC 14E4 16AC 103C 703D 14E4 1679 103C 170C 14E4 164C 103C 7037 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 14E4 1657 103C 3383 14E4 1657 103C 3372 14E4 1657 103C 169D 14E4 168E 103C 3382 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 165F 103C 1786 14E4 168E 103C 339D 14E4 1655 103C 18D2 14E4 1657 103C 1904 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 165F 103C 2133 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 1650 103C 3654 14E4 16AE 103C 1931 14E4 16AE 103C 193A 14E4 16AE 103C 18D3 14E4 16AE 103C 339D 14E4 16AE 103C 3382 14E4 16AE 103C 1798 14E4 16AE 103C 17A5 14E4 16A4 103C 1917 14E4 16A4 103C 1916 14E4 16AE 103C 1930 14E4 16AE 103C 1933 14E4 16AE 103C 1932 14E4 1639 103C 7055 hp-firmware-nic-broadcom-2.14.17-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1251199102/v99809/hp-firmware-nic-broadcom-2.14.17-1.1.i386.rpm file://./hp/swpackages/hp-firmware-nic-broadcom-2.14.17-1.1.i386.rpm     changed HP Broadcom Online Firmware Upgrade Utility for Linux x86_64 HP Broadcom Online Firmware Upgrade Utility for Linux x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP023985.scexe Networking Server Firmware - Network English (US)
    This package requires the appropriate driver for your network adapter be installed and all Ethernet ports brought up (ifup ethX or ifconfig ethX up) before firmware can be updated.

    This package requires the appropriate driver version for your network adapter be installed before firmware can be updated. This package requires at least one of the following, as applicable:
    • HP Broadcom tg3 Ethernet Driver RPM version 3.137e-3 or later
    • HP Broadcom 1/10/20GbE Multifunction Drivers RPM version 7.10.73-1 or later
       
    ]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.

    • The CP023985.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP023985.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP023985.scexe in the '/usr/lib/x86_64-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved in the "nicfwupg.log" file  located where the smart component was executed.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/i386-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the "nicfwupg.log" file, located where the smart component was executed.

    Additional Information:
    • The device ID in NPAR (NIC Partitioning) mode is different from the device ID used for Flex10, or (forced) Single Function mode.  For example, adapter device IDs '0x168E' and '0x16A2' become '0x16AE' and '0x16A4,' respectively, after enabling NPAR.
    • Network connectivity may stop during the firmware upgrade process and may need to be restarted after completion.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>
    NIC Boot Code Version PXE Version CLP Version iSCSI Version IPMI Version NCSI Version FCoE Version UEFI Version CCM Version L2 Version
    HP NC107i PCIe Gigabit Server Adapter 3.35 n/a n/a n/a 8.07 n/a n/a n/a n/a n/a
    HP NC325m PCIe Quad Port Gigabit Server Adapter 3.28 n/a 1.3.6 n/a n/a n/a n/a n/a n/a n/a
    HP Ethernet 1Gb 2-port 330i Adapter (18D2) 1.61 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 330i Adapter (22BD) 2.05 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331FLR Adapter
    HP Ethernet 1Gb 4-port 331T Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331i Adapter
    HP Ethernet 1Gb 4-port 331i-SPI Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332i Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332T Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP NC373F PCIe Multifunction Gigabit Server Adapter
    HP NC373T PCIe Multifunction Gigabit Server Adapter    		 1.9.6 2.8.5 n/a n/a n/a n/a n/a n/a n/a n/a
    HP NC382i DP Multifunction Gigabit Server Adapter 5.2.3 n/a n/a 7.4.2 n/a 2.0.12 n/a n/a n/a n/a
    HP NC382m DP 1GbE Multifunction BL-c Adapter 5.2.3 4.6.10 n/a 3.1.7 n/a n/a n/a n/a n/a n/a
    HP NC382T PCIe DP Multifunction Gigabit Server Adapter 5.2.3 5.2.4 n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP Flex-10 10Gb 2-port 530FLB Adapter
    HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
    HP Flex-10 10Gb 2-port 530M Adapter
    HP Ethernet 10Gb 2-port 530SFP+ Adapter
    HP Ethernet 10Gb 2-port 530T Adapter    		 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) 6.2.28 n/a n/a 3.1.5 n/a n/a n/a n/a n/a n/a
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) 6.2.28 n/a n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP NC532m Dual Port 10GbE Multifunction BL-c Adapter 6.2.28 7.0.53 n/a 7.4.2 n/a n/a n/a n/a n/a n/a
    HP Ethernet 10Gb 2-port 533FLR-T Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP FlexFabric 10Gb 2-port 534FLB Adapter
    HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
    HP FlexFabric 10Gb 2-port 534M Adapter
    HP StoreFabric CN1100R Dual Port Converged Network Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31
    HP FlexFabric 10Gb 2-port 536FLB Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP FlexFabric 20Gb 2-port 630FLB Adapter
    HP FlexFabric 20Gb 2-port 630M Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31

    ]]>         firmware:NIC 14E4 16AC 103C 703D 14E4 1679 103C 170C 14E4 164C 103C 7037 14E4 1650 103C 171C 14E4 165B 103C 705D 14E4 1639 103C 7059 14E4 163A 103C 171D 14E4 1650 103C 7058 14E4 168E 103C 3382 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 165F 103C 1786 14E4 168E 103C 339D 14E4 1655 103C 18D2 14E4 1657 103C 1904 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 1650 103C 3654 14E4 1665 103C 22BD 14E4 16AE 103C 1931 14E4 16AE 103C 193A 14E4 16AE 103C 18D3 14E4 16AE 103C 339D 14E4 16AE 103C 3382 14E4 16AE 103C 1798 14E4 1657 103C 22BE 14E4 16AE 103C 17A5 14E4 16A4 103C 1917 14E4 16A4 103C 1916 14E4 16AE 103C 1930 14E4 16AE 103C 1933 14E4 16AE 103C 1932 14E4 16A2 103C 22FA 14E4 16A4 103C 22FA 14E4 165F 103C 2133 14E4 1639 103C 7055 hp-firmware-nic-broadcom-2.14.17-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p649739856/v99810/hp-firmware-nic-broadcom-2.14.17-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-nic-broadcom-2.14.17-1.1.x86_64.rpm     changed HP QLogic P3P Online Firmware Upgrade Utility for Linux x86 HP QLogic P3P Online Firmware Upgrade Utility for Linux x86 SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) CP023982.scexe Networking Server Firmware - Network English (US)
    This package requires an HP QLogic qlcnic Drivers RPM, version 5.3.61.3-2 or later for the appropriate platform, be installed before firmware can be updated.]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/i386-linux-gnu' location.

    • The CP023982.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP023982.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP023982.scexe in the '/usr/lib/i386-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved to the CP023982.log file, located in the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/i386-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the CP023982.log file, located in the /var/cpq/ directory.

    Additional Information:
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>         firmware:nic 1077 8020 103C 3346 1077 8020 103C 3733 1077 8020 103C 1957 hp-firmware-nic-qlogic-p3p-1.7.16-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p2021366974/v99807/hp-firmware-nic-qlogic-p3p-1.7.16-1.1.i386.rpm file://./hp/swpackages/hp-firmware-nic-qlogic-p3p-1.7.16-1.1.i386.rpm     changed HP QLogic P3P Online Firmware Upgrade Utility for Linux x86_64 HP QLogic P3P Online Firmware Upgrade Utility for Linux x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP023983.scexe Networking Server Firmware - Network English (US)
    This package requires an HP QLogic qlcnic Drivers RPM, version 5.3.61.3-2 or later for the appropriate platform, be installed before firmware can be updated.]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.

    • The CP023983.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP023983.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP023983.scexe in the '/usr/lib/x86_64-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved to the CP023983.log file, located in the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the CP023983.log file, located in the /var/cpq/ directory.

    Additional Information:
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>         firmware:nic 1077 8020 103C 3346 1077 8020 103C 3733 1077 8020 103C 1957 hp-firmware-nic-qlogic-p3p-nic-1.7.16-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1309094514/v99808/hp-firmware-nic-qlogic-p3p-nic-1.7.16-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-nic-qlogic-p3p-nic-1.7.16-1.1.x86_64.rpm     changed HP QLogic P3 Online Firmware Upgrade Utility for Linux x86 HP QLogic P3 Online Firmware Upgrade Utility for Linux x86 SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) CP024531.scexe Networking Server Firmware - Network English (US)
    This package version can be used to upgrade adapters with firmware versioned 4.0.230 and later.

    This package can be used with the HP Smart Update Manager (HPSUM) version 7.0.0.0 or later. Earlier versions of HPSUM cannot install this package correctly.]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/i386-linux-gnu' location.

    • The CP024531.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP024531.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP024531.scexe in the '/usr/lib/i386-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved to the CP024531.log file, located in the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/i386-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the CP024531.log file, located in the /var/cpq/ directory.

    Additional Information:
    • The ethernet interfaces may be down temporarily during the update process. Any remote sessions via these interfaces will be disconnected temporarily.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>
    ]]>         firmware:netxen_nic 4040 0100 103C 705A 4040 0100 103c 1740 hp-firmware-nic-netxen-5.6.3-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p612290234/v101172/hp-firmware-nic-netxen-5.6.3-1.1.i386.rpm file://./hp/swpackages/hp-firmware-nic-netxen-5.6.3-1.1.i386.rpm     changed HP QLogic P3 Online Firmware Upgrade Utility for Linux x86_64 HP QLogic P3 Online Firmware Upgrade Utility for Linux x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024532.scexe Networking Server Firmware - Network English (US)
    This package version can be used to upgrade adapters with firmware versioned 4.0.230 and later.

    This package can be used with the HP Smart Update Manager (HPSUM) version 7.0.0.0 or later. Earlier versions of HPSUM cannot install this package correctly.]]>         Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.

    • The CP024532.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP024532.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP024532.scexe in the '/usr/lib/x86_64-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved to the CP024532.log file, located in the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved to the CP024532.log file, located in the /var/cpq/ directory.

    Additional Information:
    • The ethernet interfaces may be down temporarily during the update process. Any remote sessions via these interfaces will be disconnected temporarily.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>         firmware:netxen_nic 4040 0100 103C 705A 4040 0100 103c 1740 hp-firmware-nic-netxen-5.6.3-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p2100299690/v101173/hp-firmware-nic-netxen-5.6.3-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-nic-netxen-5.6.3-1.1.x86_64.rpm     changed HP Intel Online Firmware Upgrade Utility for Linux x86 HP Intel Online Firmware Upgrade Utility for Linux x86 SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) CP024533.scexe Networking Server Firmware - Network English (US) Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/i386-linux-gnu' location.

    • The CP024533.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP024533.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP024533.scexe in the '/usr/lib/i386-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved in the CP024533.log file, located at the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/i386-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved in the CP024533.log file, located at the /var/cpq/ directory.

    Additional Information:
    • Under certain scenarios, after updating the EPROM you may be required to reboot the system and re-run the component in order to update the flash ROM (OROM) on the adapter(s).
    • Network connectivity may stop during the firmware upgrade process and may need to be restarted after completion.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>
    The combo image includes:
    • 1GbE Boot Agent: v1.5.50
    • 10GbE Boot Agent: v2.3.20
    • 1GbE UEFI Driver: v6.4.13
    • 10GbE UEFI Driver: v4.5.19
    ]]>         firmware:intel_nic 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103c 3380 8086 1521 103C 339E 8086 1523 103C 18D1 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 1521 103C 17D1 8086 1528 103C 192D 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 10FB 103C 2159 intelfugtool hp-firmware-nic-intel-1.7.7-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p612302059/v101176/hp-firmware-nic-intel-1.7.7-1.1.i386.rpm file://./hp/swpackages/hp-firmware-nic-intel-1.7.7-1.1.i386.rpm     changed HP Intel Online Firmware Upgrade Utility for Linux x86_64 HP Intel Online Firmware Upgrade Utility for Linux x86_64 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024534.scexe Networking Server Firmware - Network English (US) Updating firmware with rpm installed:
    • Install the NIC firmware rpm using the commmand:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.

    • The CP024534.scexe script is located in the 'hp-scexe-compat' folder. Further information is available in CP024534.txt file in the 'hp-firmware-nic-*' folder. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the first step above.  

    • To install firmware, you can execute ONE of the following commands:
      • ./CP024534.scexe in the '/usr/lib/x86_64-linux-gnu' location (OR)
      • ./hpsetup in the 'hp-firmware-nic-*' location

    • The results of the firmware upgrade are saved in the CP024534.log file, located at the /var/cpq/ directory.

    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>

    Updating firmware without installing the rpm:
    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.

    • Navigate to the 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run ./hpsetup to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is based on the version of the rpm installed in the step above.

    • The results of the firmware upgrade are saved in the CP024534.log file, located at the /var/cpq/ directory.

    Additional Information:
    • Under certain scenarios, after updating the EPROM you may be required to reboot the system and re-run the component in order to update the flash ROM (OROM) on the adapter(s).
    • Network connectivity may stop during the firmware upgrade process and may need to be restarted after completion.
    • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the adapter requires following the above outlined steps.
    ]]>
    The combo image includes:
    • 1GbE Boot Agent: v1.5.50
    • 10GbE Boot Agent: v2.3.20
    • 1GbE UEFI Driver: v6.4.13
    • 10GbE UEFI Driver: v4.5.19
    ]]>         firmware:intel_nic 8086 1521 103C 337F 8086 1523 103C 339F 8086 1521 103c 3380 8086 1521 103C 339E 8086 1523 103C 18D1 8086 10F8 103C 18D0 8086 10FB 103C 17D3 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 1521 103C 17D1 8086 1528 103C 192D 8086 10FB 103C 211B 8086 1528 103C 211A 8086 1523 103C 1989 8086 1521 103C 2003 8086 1521 103C 2226 8086 10FB 103C 2159 hp-firmware-nic-intel-1.7.7-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p263430609/v101177/hp-firmware-nic-intel-1.7.7-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-nic-intel-1.7.7-1.1.x86_64.rpm     new Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025807.scexe Networking Server Firmware - Network English (US) Updating firmware with rpm installed:
    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder. 
    • From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>
    Updating firmware without installing rpm:
    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
    ]]>         This software package contains the following firmware versions:

    InfiniBand Card Type Firmware Version PSID
    HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) 2.32.5430 HP_1200111023
    HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) 2.32.5430 HP_2240110004

     

    ]]>         firmware:nic 15B3 1007 103C 8020 15B3 1007 103C 801F hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1182272498/v105440/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.x86_64.rpm file://./hp/swpackages/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.x86_64.rpm hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1182272498/v105440/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.x86_64.rpm     new Online Firmware Upgrade Utility (Linux x86_64) for HP Infiniband FDR 2P 545QSFP Adapte (HP Part # 702211-B21), HP Infiniband FDR 2P 545FLR-QSFP Adapter (HP Part # 702212-B21) and HP Infiniband FDR 2P 545M Adapter(HP Part #702213-B21) Online Firmware Upgrade Utility (Linux x86_64) for HP Part # 702211-B21, HP Part # 702212-B21 and HP Part # 702213-B21 Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024506.scexe Networking Firmware - Network English (US) Updating firmware with rpm installed:
    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder. 
    • From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>
    Updating firmware without installing rpm:
    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
    ]]>         This software package contains the following firmware versions:
     

    InfiniBand Card Type Firmware Version PSID
    HP Infiniband FDR 2P 545FLR-QSFP Adapter 10.10.4042 HP_02C0110019
    HP Infiniband FDR 2-port 545QSFP Adapter 10.10.4042
    HP_02B0110019
     
    HP Infiniband FDR 2P 545M Adapter 10.10.4042 HP_02A0110019

    ]]>         firmware:nic 15b3 1011 103C 1954 15b3 1011 103C 1953 15b3 1011 103C 1955 hp-firmware-hca-mellanox-infiniband-only-1.0.0-1.1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1863381011/v101094/hp-firmware-hca-mellanox-infiniband-only-1.0.0-1.1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-hca-mellanox-infiniband-only-1.0.0-1.1.1.x86_64.rpm     new Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox VPI (Ethernet and Infiniband mode) devices on Linux x86_64 platform Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox VPI (Ethernet and Infiniband mode) devices Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025646.scexe Networking Server Firmware - Network English (US) Updating firmware with rpm installed:
    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder. 
    • From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>
    Updating firmware without installing rpm:
    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
    ]]>         This software package contains the following firmware versions:
     

    InfiniBand Card Type Firmware Version PSID
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter 2.32.5100 HP_0240230019
    HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter 2.32.5100 HP_0250230018
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter 2.32.5100 HP_0280210019
    HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter 2.32.5100 HP_0230240019
    HP_0230220019
    HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter 2.32.5100 HP_0230240009
    HP_0230220009
    HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter 2.32.5270 HP_1350110023
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter 2.32.5230 HP_1360110017
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter 2.32.5200 HP_1370110017
    HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter 2.32.5290 HP_1380110017
    HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter 2.32.5290 HP_1390110023
    HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544+A8L Adapter 2.32.6130 HP_2010110021
    HP Infiniband QDR/Ethernet 10Gb 2P 544i Adapter 2.30.3200 HP_0280110018
    HP XL230b Gen9 InfiniBand FDR/Ethernet 40Gb 2-port 544+i Adapter 2.32.5270 HP_2020110019

    ]]>         firmware:nic 15b3 1007 103C 22F3 15b3 1007 103C 22F4 15b3 1007 103C 22F2 15B3 1007 103C 8003 15b3 1007 103C 22F5 15b3 1007 103C 22F1 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1777 15B3 1003 103C 18CF 15B3 1003 103C 18CE 15B3 1007 103C 800F 15B3 1003 103C 17C9 hp-firmware-hca-mellanox-vpi-eth-ib-1.0.0-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p494438816/v104805/hp-firmware-hca-mellanox-vpi-eth-ib-1.0.0-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-hca-mellanox-vpi-eth-ib-1.0.0-1.1.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) VMware ESX/ESXi 4.1 Cross Operating System VMware vSphere 5.1 VMware ESXi 5.0 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025735.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812

    Release Version and/or Date: 
         6.62

    Last Recommended or Critical Version:
         6.60

    Previous Version of Firmware:
         6.60

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Performance enhancement when a drive starts to degrade due to excessive recovered media errors.
    Problems Fixed:
    • On systems configured with HP Smart Array P711m controllers connected to logical volumes on HP P2000 G3 SAS storage arrays, the Smart Array device driver ‘hpsa’ would cease to function during installation of VMware vSphere 5.5 Update 2.
    • After the Smart Array device driver 'hpsa' was upgraded to version 3.4.6-165 on Red Hat Enterprise Linux 6 Update 4 or Update 5 on a server configured with logical volumes on HP P2000 G3 Storage Systems or HP MSA 2040 SAS Storage Arrays, the system would cease to function and an HP Smart Array P712m controller lockup would be reported after reboot. (POST Error: 1719 - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13))

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware 103C 323A 103C 3241 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 3243 103C 323A 103C 324A 103C 323A 103C 324B CP025735.scexe CP025735.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p332076214/v105164/CP025735.scexe file://./hp/swpackages/CP025735.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware vSphere 5.1 VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Microsoft Windows Server 2008 R2 VMware vSphere 6.0 CP025734.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812

    Release Version and/or Date: 
         6.62

    Last Recommended or Critical Version:
         6.60

    Previous Version of Firmware:
         6.60

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Performance enhancement when a drive starts to degrade due to excessive recovered media errors.
    Problems Fixed:
    • On systems configured with HP Smart Array P711m controllers connected to logical volumes on HP P2000 G3 SAS storage arrays, the Smart Array device driver ‘hpsa’ would cease to function during installation of VMware vSphere 5.5 Update 2.
    • After the Smart Array device driver 'hpsa' was upgraded to version 3.4.6-165 on Red Hat Enterprise Linux 6 Update 4 or Update 5 on a server configured with logical volumes on HP P2000 G3 Storage Systems or HP MSA 2040 SAS Storage Arrays, the system would cease to function and an HP Smart Array P712m controller lockup would be reported after reboot. (POST Error: 1719 - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13))

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware 103C 323A 103C 3241 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 3243 103C 323A 103C 324A 103C 323A 103C 324B CP025734.scexe hp-firmware-smartarray-14ef73e580-6.62-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1156993750/v105162/hp-firmware-smartarray-14ef73e580-6.62-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-14ef73e580-6.62-1.1.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Hewlett-Packard Development Company, L.P. Solaris 10 for x86 Systems Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) VMware ESX/ESXi 4.1 Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows 7 (32-bit) - All Editions Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Citrix XenServer 5.x Citrix XenServer 4.x HP-UX 11.x OpenVMS v8.4 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Citrix XenServer 6.x CP026358.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822

    Release Version and/or Date:
         6.34

    Last Recommended or Critical Version:
         6.34    

    Previous Version of Firmware:
         6.00

    Firmware Dependency:
         None

    • Enhancements/New Features:

    • Improved error handling when hard disk drives generate a large number of recoverable errors.
    • Added support for non-hotplug disk drives.
    • Added support for HP ProLiant Gen9 servers:
      • HP ProLiant BL460c Gen9 Server
      • HP ProLiant BL660c Gen9 Server

    • Problems Fixed:

    • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    • When a controller was set to RAID6 mode and a large number of recoverable errors were generated by hard disk drives in the system, the controller might go into a degraded mode and cease to function. A 0x0E error message would display during POST on subsequent power cycle and in the Integrated Management Log (IML).
    • The controller would report 0xE0 error to HP Smart Storage Administrator (HP SSA) and would cease to function when set to RAID 6 mode.
    • Intermittent SSD SATA 6G drive failures would occur when drive was configured in Bay 1 of HP ProLiant BL465 Gen8 Server.
    • Uncorrectable ECC errors would cause the controller to stop responding (Lockup 0x13).  This version of Smart Array firmware properly calculates the maximum controller memory bandwidth required to sustain streaming write operations with the current logical drive configuration and reduces the cache memory speed on configurations that do not require peak controller memory bandwidth.  When running at the slower memory speed, less power is consumed and performance degradation is expected to be negligible. For additional information, reference Customer Advisory c03755983.
    • The HP D2220sb Storage Blade is not recognized when configuring it with the HP ProLiant BL460c Gen9 Server Blade. For additional information please refer to the customer advisory # c04602866

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware firmware 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 CP026358.scexe CP026358.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1088098606/v107072/CP026358.scexe file://./hp/swpackages/CP026358.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Microsoft Windows Server 2008 R2 VMware vSphere 6.0 CP026360.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822

    Release Version and/or Date:
         6.34

    Last Recommended or Critical Version:
         6.34  

    Previous Version of Firmware:
         6.00

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Improved error handling when hard disk drives generate a large number of recoverable errors.
    • Added support for non-hotplug disk drives.
    • Added support for HP ProLiant Gen9 servers:
      • HP ProLiant BL460c Gen9 Server
      • HP ProLiant BL660c Gen9 Server

    Problems Fixed:

    • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    • When a controller was set to RAID6 mode and a large number of recoverable errors were generated by hard disk drives in the system, the controller might go into a degraded mode and cease to function. A 0x0E error message would display during POST on subsequent power cycle and in the Integrated Management Log (IML).
    • The controller would report 0xE0 error to HP Smart Storage Administrator (HP SSA) and would cease to function when set to RAID 6 mode.
    • Intermittent SSD SATA 6G drive failures would occur when drive was configured in Bay 1 of HP ProLiant BL465 Gen8 Server.
    • Uncorrectable ECC errors would cause the controller to stop responding (Lockup 0x13).  This version of Smart Array firmware properly calculates the maximum controller memory bandwidth required to sustain streaming write operations with the current logical drive configuration and reduces the cache memory speed on configurations that do not require peak controller memory bandwidth.  When running at the slower memory speed, less power is consumed and performance degradation is expected to be negligible. For additional information, reference Customer Advisory c03755983.
    • The HP D2220sb Storage Blade is not recognized when configuring it with the HP ProLiant BL460c Gen9 Server Blade. For additional information please refer to the customer advisory # c04602866

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware firmware 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 CP026360.scexe hp-firmware-smartarray-46a4d957a7-6.34-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p2102220776/v107074/hp-firmware-smartarray-46a4d957a7-6.34-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-46a4d957a7-6.34-1.1.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux - Smart Array P230i, P430, P431, P731m, P830i, and P830 Smart Array P230i, P430, P431, P731m, P830i, and P830 Hewlett-Packard Development Company, L.P. Solaris 10 for x86 Systems Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) VMware ESX/ESXi 4.1 Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows 7 (64-bit) - All Editions Microsoft Windows 7 (32-bit) - All Editions Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Citrix XenServer 5.x Citrix XenServer 4.x HP-UX 11.x OpenVMS v8.4 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 CP026354.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - Smart Array P230i, P430, P431, P731m, P830i, and P830

    Release Version and/or Date:
         2.40

    Last Recommended or Critical Version:
         2.40   

    Previous Version of Firmware:
         2.32

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed in version 2.40:
    This firmware release resolved the following issue:

    •  Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1921 103c 323c 103c 1924 CP026354.scexe CP026354.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p324636807/v107067/CP026354.scexe file://./hp/swpackages/CP026354.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P230i, P430, P431, P731m, P830i, and P830 Smart Array P230i, P430, P431, P731m, P830i, and P830 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Microsoft Windows Server 2008 R2 VMware vSphere 6.0 CP026352.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P230i, P430, P431, P731m, P830i, and P830

    Release Version and/or Date:
         2.40

    Last Recommended or Critical Version:
         2.40 

    Previous Version of Firmware:
         2.32

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed in version 2.40:
    This firmware release resolved the following issue:

    •  Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1921 103c 323c 103c 1924 CP026352.scexe hp-firmware-smartarray-112204add8-2.40-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1417365744/v107065/hp-firmware-smartarray-112204add8-2.40-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-112204add8-2.40-1.1.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Microsoft Windows Server 2008 R2 VMware vSphere 6.0 CP026559.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841

     

    Release Version and/or Date:
         2.14

    Last Recommended or Critical Version:
         2.14

    Previous Version of Firmware:
         1.34

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Servers now power up faster due to improvements in the UEFI controller driver.
    • Logical volume transformations are allowed on controllers without data preservation.
    • Drives can now be hot-added in a zoned configuration.

    Problems Fixed:

    • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001
    • When rebuilding a logical volume greater than 2TB in size, the controller might cease to function (POST Lockup 0xE0). Controller would report a POST Lockup 0xE0 error and cease to function, when the following conditions were met:

                     1) Encryption enabled and a re-key operation was in progress.
                     2) While IO was in progress, physical drives failed in an Advanced Data Guarding (RAID6 or RAID60) volume, which caused the volume to go into a degraded state.
                     3) Degraded Mode Performance Optimization was enabled via HP Smart Storage Administrator.

    • If a power outage or brownout occurred while running a volume expansion, the controller might cease to function on the following boot (POST Lockup 0x13).
    • HP D2600/D2700 Disk Enclosures might not show the correct box number on the LED display.
    • Controller might become unresponsive if a drive was re-inserted into encrypted LUN while performing IO on it.
    • When running IO with encryption turned on in remote mode and a local key cache enabled, changing the master key might result in encryption being disabled on the next power up.
    • Controller allowed encryption key changes even with locked volumes.
    • A key restore from an Enterprise Secure Key Manager could take a long time for large configurations.
    • Users were unable to install Red Hat Enterprise Linux 6 Update 5 to a logical volume on an HP P2000 MSA Array System if both an HP H241 and H240 Smart Host Bus Adapter were present in the system.
    • When HP D3700 Disk Enclosures were connected to an HP H240 Smart Host Bus Adapter, the maximum number of enclosures displayed in the boot menu was five, although a maximum of eight enclosures were supported.
    • When a volume expansion or encryption re-key operation was performed, and if multiple power losses or brownouts occurred, data might become inaccessible (POST Message 1769).
    • POST messages 1764, 1768, 1784, 1786, 1787, 1789, 1831 have been updated and/or corrected.

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca 103c 3239 103c 21c8 CP026559.scexe hp-firmware-smartarray-ea3138d8e8-2.14-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p773315150/v107697/hp-firmware-smartarray-ea3138d8e8-2.14-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-ea3138d8e8-2.14-1.1.x86_64.rpm     Online ROM Flash Component for Linux - HP Host Bus Adapters H220, H221, H222, H210i and H220i HP HBA(Host Bus Adapters) H220,H221,H222,H210i,H220i Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP023362.scexe Storage Server Firmware - Storage Controller English (US) Run Smart Component manually in a Linux environment:
    To update firmware in an online Linux environment, complete the following steps:
    1. Login as root. (You must be root in order to apply the ROM update.)
    2. Copy the Smart Component to a directory.
    3. From the same directory, run the Smart Component.
          Example: ./CPXXXXXX.scexe
    4. Review the Smart Component installation log, which is available at /var/cpq/Component.log.
    5. Reboot the server for the update to take effect immediately.

    Run Smart Component using HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM):
    You can either manually run the Smart Component from the SPP to install the firmware or use HP SUM to deploy it.
     
                 Manually deploy the Smart Component:

    To manually run the Smart Component, complete the following steps:

    1. Mount the ISO.
    2. Go to /hp/swpackages.
    3. Run the Smart Component as noted above.
    4. When the dialog window displays, click the Install button to start the installation process.
    5. Follow the directions given by the Smart Component.
    6. Review the Smart Component installation log as noted above.
    7. Reboot the server for the update to take effect immediately.
    • Deploy the Smart Component using HP SUM:

    To deploy the Smart Component using HP SUM, complete the following steps:

    1. Download the Smart Component to a directory which can be an existing repository or a directory that can be added as a repository in HP SUM.
    2. Access HP SUM from the latest SPP ISO which can be downloaded from http://www.hp.com/go/spp/download.
    3. Launch hpsum from /hp/swpackages.
      • If the Smart Component is in an existing HP SUM repository, then continue to step 4.
      • If the Smart Component is not in an existing HP SUM repository, on the Source Selection screen, add a repository whose location is where the component is located.
    4. Select the appropriate repository where the Smart Component is located.
    5. Follow the on-screen instructions to update the firmware.
    6. Review the HP SUM installation log which is accessable as a link on the Install/Review Updates screen.
    7. System reboot is required for the update to take effect immediately. 

    For more information on the SPP, go to www.hp.com/go/spp/download or www.hp.com/go/spp/documentation.
     
    Offline Smart Component update using HP SPP on bootable USB Key:

    To update firmware on a server in offline mode, complete the following steps:

    1. Place the SPP on a USB key using the HP USB Key Creator Utility which is available from the Utilities tab on www.hp.com/go/simple-fw-sw.
    2. Copy this Smart Component to the /SPP20xxxxx/hp/swpackages directory on the USB key.
    3. Boot the target system to the newly created USB key containing in the SPP.
    4. You can use either Automatic or Interactive mode to install the component.
      1. For Automatic mode, follow the instructions on the screen after selecting Automatic.
      2. For Interactive mode, follow the on-screen HP SUM instructions to update the firmware.
    ]]>         Deliverable Name:
         Online ROM Flash Component for Linux - HP HBA(Host Bus Adapter) H220,H221,H222,H210i AND H220i 

    Release Version and/or Date:
         15.10.07.00

    Last Recommended or Critical Version:
         15.10.07.00

    Previous Version of Firmware:
         15.10.01.00

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed in version 15.10.07.00:

    • Resolves POST error ‘MPT BIOS Fault 13h’. If this error occurs, the system will not boot from any boot device attached to an HP H2xx Host Bus Adapter (HBA) and will be unable to access data on drives attached to the HP H2xx HBA. The fault is triggered if the link between the HP H2xx HBA and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD).

    Known Issues: 
         None

    ]]>         firmware firmware firmware firmware firmware 1000 0087 1590 0043 1000 0087 1590 0042 1000 0087 1590 0044 1000 0087 1590 0041 1000 0070 1590 0046 CP023362.scexe CP023362.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p255115651/v97324/CP023362.scexe file://./hp/swpackages/CP023362.scexe     Supplemental Update / Online ROM Flash Component for Linux - HP Smart Array B320i RAID controller B320i Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 11 (x86) Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition VMware ESX/ESXi 4.1 Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows HPC Server 2008 R2 Cross Operating System Microsoft Windows Server 2012 VMware vSphere 5.1 VMware ESXi 5.0 Microsoft Windows Server 2012 R2 VMware vSphere 5.5 CP023360.scexe Storage Server Firmware - Storage Controller English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using theHP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - HP Smart Array B320i RAID controller

    Release Version and/or Date:
         15.10.07.00

    Last Recommended or Critical Version:
         15.10.07.00

    Previous Version of Firmware:
         15.10.01.00

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed in version 15.10.07.00:

    • Resolves POST error ‘MPT BIOS Fault 13h’. If this error occurs, the system will not boot from any boot device attached to an HP Smart Array B320i RAID controller and will be unable to access data on drives attached to the HP Smart Array B320i RAID controller. The fault is triggered if the link between the HP Smart Array B320i RAID controller and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD).

    Known Issues: 
         None

    ]]>         firmware firmware 1590 0045 1590 0045 1590 0047 1590 0047 CP023360.scexe CP023360.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1335652794/v97322/CP023360.scexe file://./hp/swpackages/CP023360.scexe     changed Offline Firmware Supplemental Update - HP SAS Expander Card HP SAS EXP Card Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Novell NetWare 6.5 Novell NetWare 5.1 SCO OpenServer 5 Cross Operating System SCO UnixWare 7 SCO OpenServer 6 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 VMware vSphere 6.0 VMware vSphere 5.5 VMware vSphere 5.1 VMware ESXi 5.0 CP022989.scexe ServerOptions Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    ]]>         Deliverable Name:
         Offline Firmware Supplemental Update - HP SAS Expander Card

    Release Version and/or Date:
          2.10

    Last Recommended or Critical Version:
          2.10

    Previous Version of Firmware:
          2.08

    Firmware Dependency:
         A minimum FW version 3.66 is required on your HP Smart Array controller when updating to 2.10 FW on your HP SAS Expander Card.

    Enhancements/New Features:

    • Resolved an issue where the Smart Component would hang during hardware discovery when an unknown device was present.

    Problems Fixed:

    • On rare occasions during a power-up sequence, the HP SAS Expander, would be unresponsive. When the HP SAS Expander was unresponsive, the attached HP Smart Array P410 or P410i Controller was not allowed to discover drives that were attached.

    Problems Fixed in version 2.10(C):

    • Fixed an issue where the offline check protocol was not included in the component installer, allowing the component to run in an online environment.

    Known Issues:
         None

    ]]>         firmware:QLOGIC CP022989.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p6670438/v96061/CP022989.scexe file://./hp/swpackages/CP022989.scexe     Supplemental Update / Online ROM Flash Component for Linux – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP ProLiant Gen8 expander Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) VMware ESX/ESXi 4.1 Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2012 VMware vSphere 5.1 VMware ESXi 5.0 Microsoft Windows Server 2012 R2 CP022118.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         3.30

    Last Recommended or Critical Version:
         3.30

    Previous Version of Firmware:
         3.14

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed:

    • Fixed an issue with the SAS connector element which reported invalid connector type/physical link for disabled PHYs.
    • Fixed the Logical Link Rate because the Rate was not set properly when PHY is disabled.

    Known Issues:
         None

    ]]>         firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC CP022118.scexe CP022118.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1456387768/v93084/CP022118.scexe file://./hp/swpackages/CP022118.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP ProLiant Gen8 expander Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 VMware vSphere 5.1 VMware ESXi 5.0 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025507.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux (x64) – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         3.30

    Last Recommended or Critical Version:
         3.30

    Previous Version of Firmware:
         3.14

    Firmware Dependency:
         None
     

    Problems Fixed:
    • Fixed an issue with the SAS connector element which reported invalid connector type/physical link for disabled PHYs.
    • Fixed the Logical Link Rate because the Rate was not set properly when PHY is disabled.
    Known Issues:

         None

    ]]>         firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC CP025507.scexe hp-firmware-smartarray-6bb114f7f5-3.30-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1097713805/v104265/hp-firmware-smartarray-6bb114f7f5-3.30-2.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-6bb114f7f5-3.30-2.x86_64.rpm     new Supplemental Update / Online ROM Flash Component for Linux (x64) – HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP Proliant Gen9 expander Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 Microsoft Windows HPC Server 2008 R2 VMware vSphere 6.0 CP025635.scexe ServerOptions Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux – HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         1.31

    Last Recommended or Critical Version:
         1.31

    Previous Version of Firmware:
         1.01

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Firmware now reads the max link rate from the backplane NVRAM and sets the rate accordingly. The expander firmware will adjust the SAS links to the appropriate speed based on the backplane type. The firmware will not try to force slower backplanes to higher link rates.    


    Problems Fixed:

    • On rare occasions, incorrect data may be read or written while a controller is rebuilding a drive.
    • Disabled Edge-Buffering to address a rare data integrity issue seen with a drive that had bad blocks.
    • In rare instances, on an HP ProLiant Gen9 series server, the Smart Array controller would detect an HP Hard Disk Drive (HDD) as a non-HP drive. For additional information please refer to the customer advisory # c04597377

    Known Issues:
         None

    ]]>         firmware:QLOGIC CP025635.scexe hp-firmware-smartarray-2de15b6882-1.31-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1097497875/v104780/hp-firmware-smartarray-2de15b6882-1.31-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-smartarray-2de15b6882-1.31-1.1.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux – HP D6000 Disk Enclosure D6000 Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 VMware vSphere 5.5 VMware vSphere 5.1 VMware ESXi 5.0 VMware ESX/ESXi 4.1 VMware ESX/ESXi 4.0 CP025876.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         firmware:QLOGIC 103c 323b 103c 3353 103C 323B 103C 3356 103c 323b 103c 3352 D6000 1000 0087 1590 0042 CP025687.scexe CP025876.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p663512692/v105640/CP025876.scexe file://./hp/swpackages/CP025876.scexe     changed HP D2600/D2700 6Gb SAS Disk Enclosure ROM Flash Component for Linux D2600, D2700 ROM Flash Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024530.scexe Storage Firmware - Storage Controller English (US) IMPORTANT: Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.

    WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.

    NOTE: When disk enclosures are cascaded, I/O module A of one enclosure is connected to I/O module A of the subsequent enclosure. During a firmware update, I/O module A in the cascaded disk enclosures is automatically updated.

    NOTE: In dual-domain configurations, both I/O modules of the target disk enclosure and cascaded disk enclosures are automatically updated during the firmware installation process.

    NOTE: All firmware flash progress messages are logged to /var/cpq/Component.log for inband and /var/cpq/MSA2000_ip.log for network flash.

    ]]>         Firmware installation instructions for Smart Array configurations

    Firmware is embedded in the downloaded file, which is a self-extracting, executable module. This module operates only from the Linux command line.
    1. Place the downloaded file in a temporary directory.
    2. Open a Linux command console.
    3. From the same directory, enable execute access to this module by entering chmod +x cpxxxxxx.scexe. (cpxxxxxx.scexe represents the downloaded file.)
    4. Execute the Smart Component by entering ./cpxxxxxx.scexe. (cpxxxxxx.scexe represents the downloaded file.)
    5. Follow the on-screen instructions provided by the installer.

    Special installation instructions for single-domain environments

    In a single domain configuration, I/O module A (top module) is connected to a SmartArray controller and I/O module B (bottom module) is unused. Even though the bottom I/O module is unused, both modules must have the same firmware version installed. Do the following to make sure that BOTH I/O modules are updated:
    1. Flash I/O module A of the first and all cascaded disk enclosures using the firmware upgrade executable.
    2. After I/O module A is flashed successfully in the disk enclosures, shut down and turn off the server.
    3. Remove A/C power to the first and all cascaded disk enclosures.
    4. Label all cables connected to I/O module A of the first and all cascaded disk enclosures and then disconnect all cables from the I/O modules.
    5. Swap the positions of the I/O modules in the enclosure.
    6. Reconnect the cables to the top I/O module (it used to be the bottom I/O module) in the enclosure, using the labels to ensure that all cabling is connected properly, in the same configuration as before.
    7. Turn on the storage enclosures and wait for them to complete their startup routines.
    8. Turn on the server.
    9. After the server startup procedure is complete, flash the top I/O module (the new I/O module A) of first and all cascaded disk enclosures using the firmware upgrade executable.
    10. After the I/O module is flashed successfully in the disk enclosures, power cycle the server to resume normal operation.

    Firmware installation instructions for MSA 2040/1040 and P2000 G3 Array Configurations

    1. Place the Smart Component in a temporary directory.
    2. Open a Linux command console.
    3. Enable execute acces to this model by typing  chmod +x CPxxxxxx.scexe
    4. From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe --target <ip_address>  --user <manage_username>  --passwd <password>
    5. Follow the directions given by the Smart Component.
    NOTES:
    • Use the -e or -f option when flashing a device, even if it is up to date.
    • Use the -g option when downgrading.
    • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.
    • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage
    NOTE: The username must have MSA 2040/1040 or P2000 G3 manage access rights to perform a firmware update.

    NOTE: This module is a SCEXE file.  When you  download this module from the HP.com web site, you cannot double click on the link.  You will need to right click the link and select "Save as."

    Installation Notes and Best Practices

    • Before installing new firmware, review system requirements, enhancements list, fixes list, and other information in the firmware release notes, device QuickSpecs, and updated user documentation.
    • Before installing new firmware, ensure that the system is stable and is not being reconfigured or changed in any way. If changes are in progress, monitor them and wait until they are completed before proceeding with the upgrade.
    • Before installing new firmware, HP recommends creating a full backup of all data stored on the enclosure.
    • When planning for a firmware update, schedule an appropriate time to perform an the update. Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.
    • After the installation process, verify system status in the software tools and confirm that the new firmware version is displayed as running on the enclosure.
    Please see Release Notes for more details]]>         firmware:QLOGIC firmware:QLOGIC 103C 323A 103C 3241 103C 323A 103C 3247 103c 323a 103c 3249 D2600 SAS AJ940A D2700 SAS AJ941A P2000 G3 FC P2000 G3 FC P2000G3 FC/iSCSI P2000G3 FC/iSCSI 103c 323b 103c 3353 103c 323b 103c 3352 103c 323b 103c 3350 P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 iSCSI P2000 G3 SAS P2000 G3 SAS 1000 0087 1590 0043 1000 0087 1590 0042 103c 323c 103c 1923 MSA 2040 SAN MSA 2040 SAN MSA 2040 SAS MSA 2040 SAS MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN MSA 1040 SAN -iCAMSPR0149_6G_app_4MB_ai.pmc -v0149 -t"D2600 SAS AJ940A" -t"D2700 SAS AJ941A" -t"260 SAS AJ940A" -t"270 SAS AJ941A" -t"D2x00 Disk Enc." -t"MDS260 CAMARO" -t"MDS270 CAMARO" CP024530.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1751082410/v101167/CP024530.scexe file://./hp/swpackages/CP024530.scexe     changed HP Firmware Flash for QLogic Fibre Channel Host Bus Adapters - Linux (x86) HP Firmware Flash for QLogic Fibre Channel HBA's (x86) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) CP024193.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) www.hp.com/go/fchba or use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:
    • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs version 8.07.00.16.11.3, for Novell SUSE 11

    • HP Fibre Channel Enablement Kit for Linux - QLogic, version 4.0.0.0-1
       
    ]]>          
    1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
    2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
    When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.
    ]]>         firmware:QLOGIC 1077 2432 103C 7040 1077 2432 103C 7041 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 installer hp-firmware-fc-qlogic-2015.02.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1882302890/v100385/hp-firmware-fc-qlogic-2015.02.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-fc-qlogic-2015.02.01-1.1.i386.rpm     changed HP Firmware Flash for QLogic Fibre Channel Host Bus Adapters - Linux (x86_64) HP Firmware Flash for QLogic Fibre Channel HBA's (x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024194.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) www.hp.com/go/fchba or use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download:
    • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.06.0, for Red Hat 6

    • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.07.0, for Red Hat 7

    • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.11.3, for Novell SUSE 11

    • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.12.0, for Novell SUSE 12

    • HP Fibre Channel Enablement Kit for Linux - QLogic, version 4.0.0.0-1
       
       

     







     ]]>         Firmware installation is a two-step process.  Install the firmware installation tool rpm, then execute the installed tool to update the firmware.
     
    1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
    2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
    When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.
     

    ]]>         firmware:QLOGIC 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 installer hp-firmware-fc-qlogic-2015.02.01-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1499391363/v100386/hp-firmware-fc-qlogic-2015.02.01-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-fc-qlogic-2015.02.01-1.1.x86_64.rpm     changed HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters - Linux (x86_64) HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters (x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) CP023422.scexe ServerOptions Networking Firmware - Storage Fibre Channel English (US) The HP supplied enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment.  The software is available from www.hp.com/go/fchba.  Select your product and then select the Software and Drivers page to find the enablement kit.  The enablement kit is also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.

    • HP Fibre Channel Enablement Kit for Linux, HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm
    ]]>          
     1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
     2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
     When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.]]>         firmware:brocade 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 installer hp-firmware-fc-brocade-2015.02.01-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1346855063/v97631/hp-firmware-fc-brocade-2015.02.01-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-fc-brocade-2015.02.01-1.1.x86_64.rpm     changed HP Firmware Flash for Emulex Fibre Channel Host Bus Adapters - Linux (x86) HP Firmware Flash for Emulex Fibre Channel HBAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) CP024658.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) Note: This component will flash the CN1000E and NC550SFP products only if the minimum firmware version, 4.1.360.15, is installed.

    The HP supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba and www.hp.com/go/cna. Select your product and then select the Software and Drivers page to find the required driver and enablement kit. The driver and enablement kit are also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.
    Linux FC Driver Kit for HP Branded Emulex FC HBAs and mezz cards, version 10.2.469.0, for Novell SUSE 11

    HP Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 10.2.477.10-1

    Note that the driver must be installed before the enablement kit.

    Environment must be running the syslog daemon for the flash engine to run
    Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs
    ]]>          
     1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
     2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
     When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.]]>         firmware:emulex 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF F100 103C 2238 installer hp-firmware-fc-emulex-2015.02.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p820189228/v101479/hp-firmware-fc-emulex-2015.02.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-fc-emulex-2015.02.01-1.1.i386.rpm     changed HP Firmware Flash for Emulex Fibre Channel Host Bus Adapters - Linux (x64) HP Firmware Flash for Emulex Fibre Channel HBAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024657.scexe ServerOptions Networking Storage Server Firmware - Storage Fibre Channel English (US) Note: This component will flash the CN1000E and NC550SFP products only if the minimum firmware version, 4.1.360.15, is installed.

    The HP supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba and www.hp.com/go/cna. Select your product and then select the Software and Drivers page to find the required driver and enablement kit. The driver and enablement kit are also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.
    Linux FC Driver Kit for HP Branded Emulex FC HBAs and mezz cards, version 10.2.469.0, for RedHat 6, RedHat 7, and Novell SUSE 11, SUSE12

    HP Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 10.2.477.10-1

    Note that the driver must be installed before the enablement kit.

    Environment must be running the syslog daemon for the flash engine to run
    Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs
    ]]>          
     1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
     2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
     When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.]]>         firmware:emulex 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 10DF F100 103C 1719 10DF FE00 103C 1708 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF F100 103C 2238 installer hp-firmware-fc-emulex-2015.02.01-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p90363882/v101478/hp-firmware-fc-emulex-2015.02.01-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-fc-emulex-2015.02.01-1.1.x86_64.rpm     changed HP Firmware Flash for Emulex Converged Network Adapters - Linux (x86) HP Firmware Flash for Emulex CNAs Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) CP024654.scexe Networking Server Firmware - Network English (US) Note: This component will flash the CN1000E and NC550SFP products only if the minimum firmware version, 4.1.360.15, is installed.

    The HP supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba and www.hp.com/go/cna. Select your product and then select the Software and Drivers page to find the required driver and enablement kit. The driver and enablement kit are also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.
    Linux FC Driver Kit for HP Branded Emulex FC HBAs and mezz cards, version 10.2.469.0, for Novell SUSE 11

    HP Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 10.2.477.10-1

    Note that the driver must be installed before the enablement kit.

    The HP supplied NIC driver must be installed prior to this firmware component if you want to update the firmware for the CNA. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download.
    HP Emulex 10Gbe Driver for Linux, version 10.2.477.6

    Red Hat Enterprise Linux 6 environments must have an additional package, libsysfs, installed.  This package is included by default on Novell SUSE 11.
     
    Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs.

    Environment must be running the syslog daemon for the flash engine to run
    ]]>          
     1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
     2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
     When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.]]>         firmware:emulex 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0704 103c 3314 19a2 0700 103c 3314 19a2 0700 103c 1747 19a2 0702 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0710 103C 184E 19A2 0712 103C 337B installer hp-firmware-cna-emulex-2015.02.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1852856759/v101475/hp-firmware-cna-emulex-2015.02.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-cna-emulex-2015.02.01-1.1.i386.rpm     changed HP Firmware Flash for Emulex Converged Network Adapters - Linux (x64) HP Firmware Flash for Emulex CNAs Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025738.scexe Networking Server Firmware - Network English (US) Note: This component will flash the CN1000E and NC550SFP products only if the minimum firmware version, 4.1.360.15, is installed.

    The HP supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba and www.hp.com/go/cna. Select your product and then select the Software and Drivers page to find the required driver and enablement kit. The driver and enablement kit are also available on the HP Service Pack for Proliant (SPP) version 2015.03.0 which is available at www.hp.com/go/spp/download.

     

    Linux FC Driver Kit for HP Branded Emulex FC HBAs and mezz cards, version 10.2.477.17, for RedHat 6, RedHat 7, Novell SUSE 11 and SUSE12

    HP Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 10.2.477.10-1

    Note that the driver must be installed before the enablement kit.

    The HP supplied NIC driver must be installed prior to this firmware component if you want to update the firmware for the CNA. Use the appropriate driver included in the HP Support Pack for ProLiant 2015.03.0, which is available at www.hp.com/go/spp/download.

    HP Emulex 10Gbe Driver for Linux, version 10.2.477.6

    Red Hat Enterprise Linux 6 environments must have an additional package, libsysfs, installed.  This package is included by default on Red Hat Enterprise 7 and Novell SUSE 11. 

    Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs.

    Environment must be running the syslog daemon for the flash engine to run

    ]]>          
     1. Install the firmware installation tool:  rpm -Uhv <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
     
     2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
     
     When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.]]>         firmware:emulex 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0704 103c 3314 19a2 0700 103c 3314 19a2 0700 103c 1747 19a2 0702 103c 3314 19a2 0700 103c 1746 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0710 103C 184E 19A2 0712 103C 337B 10DF 0720 103C 21D4 10DF 0722 103C 21D4 10DF 0724 103C 21D4 10DF 0720 103C 1935 10DF 0724 103C 1935 10DF 0722 103C 1935 10DF 0720 103C 1934 10DF 0724 103C 1934 10DF 0722 103C 1934 10DF 0720 103C 220A 10DF 0724 103C 220A 10DF 0722 103C 220A 10DF 0720 103C 803F installer hp-firmware-cna-emulex-2015.02.02-1.1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1376376463/v105233/hp-firmware-cna-emulex-2015.02.02-1.1.x86_64.rpm file://./hp/swpackages/hp-firmware-cna-emulex-2015.02.02-1.1.x86_64.rpm     Online ROM Flash Component for Linux - HP ProLiant DL585 G2/DL585 G5/DL585 G6 (A07) Servers HP ProLiant DL585 G2/DL585 G5/DL585 G6 (A07) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 3 (x86) Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015245.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:
    ]]>         firmware:system CP015245.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p502084772/v69327/CP015245.scexe file://./hp/swpackages/CP015245.scexe     Online ROM Flash Component for Linux - HP ProLiant DL785 G5/DL785 G6 (A15) Servers HP ProLiant DL785 G5/DL785 G6 (A15) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015409.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


    ]]>         For additional information refer to:
    ]]>         firmware:system CP015409.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p620359939/v70009/CP015409.scexe file://./hp/swpackages/CP015409.scexe     changed Online ROM Flash Component for Linux - HP ProLiant DL585 G7 (A16) Servers HP ProLiant DL585 G7 (A16) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025611.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-a16-2014.09.03-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p185884509/v104655/hp-firmware-system-a16-2014.09.03-2.i386.rpm file://./hp/swpackages/hp-firmware-system-a16-2014.09.03-2.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant DL385 G7 (A18) Servers HP ProLiant DL385 G7 (A18) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP022918.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:

    ]]>         firmware:system CP022918.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p442313297/v95775/CP022918.scexe file://./hp/swpackages/CP022918.scexe     Online ROM Flash Component for Linux - HP ProLiant DL385 G5p/DL385 G6 (A22) Servers HP ProLiant DL385 G5p/DL385 G6 (A22) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015242.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


    ]]>         For additional information refer to:
    ]]>         firmware:system CP015242.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1545408802/v69324/CP015242.scexe file://./hp/swpackages/CP015242.scexe     changed Online ROM Flash Component for Linux - HP ProLiant SL335s G7 (A24) Servers HP ProLiant SL335s G7 (A24) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025613.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-a24-2012.12.08-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p284866046/v104666/hp-firmware-system-a24-2012.12.08-2.i386.rpm file://./hp/swpackages/hp-firmware-system-a24-2012.12.08-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025619.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-a28-2014.09.03-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1705250441/v104686/hp-firmware-system-a28-2014.09.03-2.i386.rpm file://./hp/swpackages/hp-firmware-system-a28-2014.09.03-2.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant SL4545 G7 (A31) Servers HP ProLiant SL4545 G7 (A31) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) CP022235.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         ]]> firmware:system CP022235.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p2135150955/v93568/CP022235.scexe file://./hp/swpackages/CP022235.scexe     Online ROM Flash Component for Linux - HP ProLiant ML350 G6 (D22) Servers HP ProLiant ML350 G6 (D22) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP021266.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


     

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021266.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p649585494/v89938/CP021266.scexe file://./hp/swpackages/CP021266.scexe     Online ROM Flash Component for Linux - HP ProLiant ML110 G7/DL120 G7 (J01) Servers HP ProLiant ML110 G7/DL120 G7 (J01) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP021114.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021114.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p2000234098/v89606/CP021114.scexe file://./hp/swpackages/CP021114.scexe     changed Online ROM Flash Component for Linux - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025624.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system hp-firmware-system-j02-2014.08.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p83256575/v104692/hp-firmware-system-j02-2014.08.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-j02-2014.08.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025614.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-j03-2014.08.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p700622313/v104667/hp-firmware-system-j03-2014.08.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-j03-2014.08.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025622.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.


     

      ]]>         firmware:system hp-firmware-system-j04-2013.11.09-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p954591696/v104690/hp-firmware-system-j04-2013.11.09-2.i386.rpm file://./hp/swpackages/hp-firmware-system-j04-2013.11.09-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025615.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.


    ]]>         firmware:system hp-firmware-system-j05-2013.11.09-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p86257600/v104670/hp-firmware-system-j05-2013.11.09-2.i386.rpm file://./hp/swpackages/hp-firmware-system-j05-2013.11.09-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025621.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.


     

    ]]>         firmware:system hp-firmware-system-j06-2013.11.09-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1180107045/v104689/hp-firmware-system-j06-2013.11.09-2.i386.rpm file://./hp/swpackages/hp-firmware-system-j06-2013.11.09-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL380 G6 (P62) Servers HP ProLiant DL380 G6 (P62) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025976.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-p62-2015.01.22-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1235927210/v106002/hp-firmware-system-p62-2015.01.22-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p62-2015.01.22-1.1.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant ML370 G6/DL370 G6 (P63) Servers HP ProLiant ML370 G6/DL370 G6 (P63) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP021234.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         For additional information refer to:


    Online ROM Flash User Guide for ML370 G6

    Online ROM Flash User Guide for DL370 G6]]>         firmware:system CP021234.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1062369938/v89835/CP021234.scexe file://./hp/swpackages/CP021234.scexe     changed Online ROM Flash Component for Linux - HP ProLiant DL360 G6 (P64) Servers HP ProLiant DL360 G6 (P64) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025979.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-p64-2015.01.22-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1796022428/v106005/hp-firmware-system-p64-2015.01.22-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p64-2015.01.22-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL580 G7 (P65) Servers HP ProLiant DL580 G7 (P65) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025609.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-p65-2013.10.01-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1779231701/v104652/hp-firmware-system-p65-2013.10.01-3.i386.rpm file://./hp/swpackages/hp-firmware-system-p65-2013.10.01-3.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL980 G7 (P66) Servers HP ProLiant DL980 G7 (P66) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025612.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-p66-2013.12.31-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p747966645/v104660/hp-firmware-system-p66-2013.12.31-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p66-2013.12.31-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL380 G7 (P67) Servers HP ProLiant DL380 G7 (P67) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025608.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-p67-2013.07.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1640457310/v104651/hp-firmware-system-p67-2013.07.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p67-2013.07.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL360 G7 (P68) Servers HP ProLiant DL360 G7 (P68) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025607.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         For additional information refer to:

    ]]>         firmware:system hp-firmware-system-p68-2013.07.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p790017133/v104650/hp-firmware-system-p68-2013.07.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p68-2013.07.02-2.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant SL390s G7 (P69) Servers HP ProLiant SL390s G7 (P69) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP021313.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


     

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021313.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1226483222/v90008/CP021313.scexe file://./hp/swpackages/CP021313.scexe     changed Online ROM Flash Component for Linux - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025618.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p70-2014.08.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p778441405/v104685/hp-firmware-system-p70-2014.08.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p70-2014.08.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025382.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p71-2014.11.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p578979504/v103932/hp-firmware-system-p71-2014.11.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p71-2014.11.01-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025625.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p72-2014.08.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p806750866/v104693/hp-firmware-system-p72-2014.08.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p72-2014.08.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (x86) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025617.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p73-2014.08.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p244945965/v104684/hp-firmware-system-p73-2014.08.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p73-2014.08.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) CP025306.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p74-2014.11.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1517521369/v103708/hp-firmware-system-p74-2014.11.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p74-2014.11.01-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 CP025335.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         ]]> firmware:system hp-firmware-system-p75-2014.11.02-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1580491682/v103787/hp-firmware-system-p75-2014.11.02-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p75-2014.11.02-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025620.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p77-2014.08.03-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p136487789/v104687/hp-firmware-system-p77-2014.08.03-2.i386.rpm file://./hp/swpackages/hp-firmware-system-p77-2014.08.03-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025623.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

      ]]>         firmware:system hp-firmware-system-p78-2014.03.28-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p524525638/v104691/hp-firmware-system-p78-2014.03.28-3.i386.rpm file://./hp/swpackages/hp-firmware-system-p78-2014.03.28-3.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL580 Gen8 (P79) Servers HP ProLiant DL580 Gen8 (P79) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) CP024870.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO. 

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.
     

    ]]>         firmware:system hp-firmware-system-p79-1.60_11_26_2014-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p784124518/v102129/hp-firmware-system-p79-1.60_11_26_2014-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p79-1.60_11_26_2014-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025616.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p80-2014.03.28-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p477099850/v104681/hp-firmware-system-p80-2014.03.28-3.i386.rpm file://./hp/swpackages/hp-firmware-system-p80-2014.03.28-3.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 6 (AMD64/EMT64) CP025677.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         ]]> firmware:system hp-firmware-system-p83-2014.11.01-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p224927254/v104899/hp-firmware-system-p83-2014.11.01-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p83-2014.11.01-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant DL120 Gen9 (P86) Servers HP ProLiant DL120 Gen9 (P86) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026393.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner.]]>         firmware:system hp-firmware-system-p86-1.32_03_06_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p2128241815/v107171/hp-firmware-system-p86-1.32_03_06_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p86-1.32_03_06_2015-1.1.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant ML10 (P88) Server HP ProLiant ML10 (P88) Server Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) CP022592.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         firmware:system CP022592.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1081918119/v94796/CP022592.scexe file://./hp/swpackages/CP022592.scexe     changed Online ROM Flash Component for Linux - HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026261.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner.]]>         firmware:system hp-firmware-system-p89-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p1002745525/v106779/hp-firmware-system-p89-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p89-1.32_03_05_2015-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant ML350 Gen9 (P92) Servers HP ProLiant ML350 Gen9 (P92) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026324.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-p92-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p976635646/v107010/hp-firmware-system-p92-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p92-1.32_03_05_2015-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE Linux Enterprise Server 12 CP025890.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-p94-2015.01.26-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p805073046/v105690/hp-firmware-system-p94-2015.01.26-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p94-2015.01.26-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant ML150 Gen9 (P95) Servers HP ProLiant ML150 Gen9 (P95) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) CP026293.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-p95-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p2128256797/v106902/hp-firmware-system-p95-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p95-1.32_03_05_2015-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant ML110 Gen9 (P99) Servers HP ProLiant ML110 Gen9 (P99) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026297.scexe ServerOptions Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-p99-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p805513164/v106927/hp-firmware-system-p99-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-p99-1.32_03_05_2015-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant XL230b Gen9 (U12) Servers HP ProLiant XL230b Gen9 (U12) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) CP026400.scexe ServerOptions Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-u12-1.32_03_06_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p1709231678/v107187/hp-firmware-system-u12-1.32_03_06_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u12-1.32_03_06_2015-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant XL230a/XL250a Gen9 (U13) Servers HP ProLiant XL230a/XL250a Gen9 (U13) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) SUSE Linux Enterprise Server 12 CP026302.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-u13-1.32_03_07_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p635173144/v106935/hp-firmware-system-u13-1.32_03_07_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u13-1.32_03_07_2015-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Online ROM Flash Component for Linux - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026115.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner.]]>         firmware:system hp-firmware-system-u14-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p939626814/v106371/hp-firmware-system-u14-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u14-1.32_03_05_2015-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026406.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner.
    ]]>         firmware:system hp-firmware-system-u15-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p2056297369/v107199/hp-firmware-system-u15-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u15-1.32_03_05_2015-1.1.i386.rpm     new Online ROM Flash Component for Linux - HP ProLiant XL730f/XL740f/XL750f Gen9 (U18) Servers HP ProLiant XL730f/XL740f/XL750f Gen9 (U18) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server CP026230.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-u18-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p1670555718/v106704/hp-firmware-system-u18-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u18-1.32_03_05_2015-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026321.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-u20-1.32_03_05_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p1737639737/v107004/hp-firmware-system-u20-1.32_03_05_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-u20-1.32_03_05_2015-1.1.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant DL320 G6/ML330 G6 (W07) Servers HP ProLiant DL320 G6/ML330 G6 (W07) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP021238.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


     

    ]]>         For additional information refer to:


    Online ROM Flash User Guide for DL320 G6

    Online ROM Flash User Guide for ML330 G6]]>         firmware:system CP021238.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p202882795/v89841/CP021238.scexe file://./hp/swpackages/CP021238.scexe     Supplemental Update / Online ROM Flash Component for Linux - HP 512MB Flash Backed Write Cache for B-Series Smart Array HP 512MB Flash Backed Write Cache for B-Series Smart Array Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 10 (x86) Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 for Itanium-Based Systems Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86-64) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) VMware vSphere 5.1 VMware ESXi 5.0 VMware ESX/ESXi 4.1 Microsoft Windows Server 2012 R2 CP023316.scexe Storage Server Firmware - Storage Controller English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the  HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - HP 512MB Flash Backed Write Cache for B-Series Smart Array

    Release Version and/or Date:
         0.50

    Last Recommended or Critical Version:
         0.44

    Previous Version of Firmware:
         0.44

    Firmware Dependency:
         None

    Enhancements/New Features:
             None

    Problems Fixed in version 0.50:
    • In some cases, when the power was applied to the system, the Smart Array controller would report that the supercap was charging even though charging had completed. The supercap charging message would display in the following locations:
      • POST
      • HP Smart Storage Administrator (HP SSA)
    Known Issues:
         None]]>         firmware:QLOGIC CP023316.scexe CP023316.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p309386049/v97188/CP023316.scexe file://./hp/swpackages/CP023316.scexe     changed Online ROM Flash for Linux - Power Management Controller (HP ProLiant Gen8 Servers) Online ROM Flash - Power Management Controller (HP ProLiant Gen8 Servers) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP025723.scexe Server Firmware - Power Management English (US), Japanese firmware:QLOGIC cpqsetup hp-firmware-powerpic-gen8-3.3-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1911459261/v105115/hp-firmware-powerpic-gen8-3.3-3.i386.rpm file://./hp/swpackages/hp-firmware-powerpic-gen8-3.3-3.i386.rpm changed Online ROM Flash for Linux - Power Management Controller Online ROM Flash - Power Management Controller Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 5 Server (x86-64) SUSE Linux Enterprise Server 12 CP025339.scexe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."]]>         To update firmware from Linux operating system on target server:                                                                                      

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component. For example: ./CPXXXXXX.scexe
    4.     Follow the directions given by the Smart Component.
    5.     Reboot your system if you would like the update to take effect immediately.
     
    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  
     
    1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2. Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3. Boot from the newly created USB key.
    4. Follow the on-screen directions to complete the firmware update.

    ]]>         firmware:QLOGIC cpqsetup hp-firmware-powerpic-dl580-4.1-4.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1142947516/v103796/hp-firmware-powerpic-dl580-4.1-4.i386.rpm file://./hp/swpackages/hp-firmware-powerpic-dl580-4.1-4.i386.rpm     changed Online ROM Flash for Linux - Advanced Power Capping Microcontroller Firmware for HP ProLiant BL/DL/MLGen9 Servers Online ROM Flash - Advanced Power Capping Microcontroller Firmware for HP ProLiant Gen9 Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 Oracle Linux 6 (AMD64/EMT64) CP025311.scexe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."]]>         To update firmware from Linux operating system on target server:                                                                                      

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component. For example: ./CPXXXXXX.scexe
    4.     Follow the directions given by the Smart Component.
    5.     Reboot your system if you would like the update to take effect immediately.


     Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO. 

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.


     
     

    ]]>         firmware:sd:powerpic cpqsetup hp-firmware-powerpic-gen9-1.0.9-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p284583079/v103720/hp-firmware-powerpic-gen9-1.0.9-1.1.i386.rpm file://./hp/swpackages/hp-firmware-powerpic-gen9-1.0.9-1.1.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant BL465c G1/BL465c G5/BL465c G6 (A13) Servers HP ProLiant BL465c G1/BL465c G5/BL465c G6 (A13) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 3 (x86) Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015203.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:
    ]]>         firmware:system CP015203.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1145725722/v69241/CP015203.scexe file://./hp/swpackages/CP015203.scexe     Online ROM Flash Component for Linux - HP ProLiant BL495c G5/BL495c G6 (A14) Servers HP ProLiant BL495c G5/BL495c G6 (A14) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015217.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


    ]]>         For additional information refer to:
    ]]>         firmware:system CP015217.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1348082886/v69274/CP015217.scexe file://./hp/swpackages/CP015217.scexe     Online ROM Flash Component for Linux - HP ProLiant BL685c G6 (A17) Servers HP ProLiant BL685c G6 (A17) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015214.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.


    ]]>         For additional information refer to:
    ]]>         firmware:system CP015214.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p756638213/v69265/CP015214.scexe file://./hp/swpackages/CP015214.scexe     changed Online ROM Flash Component for Linux - HP ProLiant BL465c G7 (A19) Servers HP ProLiant BL465c G7 (A19) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025604.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

      ]]>         firmware:system hp-firmware-system-a19-2014.02.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p361457557/v104645/hp-firmware-system-a19-2014.02.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-a19-2014.02.02-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL685c G7 (A20) Servers HP ProLiant BL685c G7 (A20) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025606.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         For additional information refer to:

    ]]>         firmware:system hp-firmware-system-a20-2014.09.03-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p384004131/v104648/hp-firmware-system-a20-2014.09.03-2.i386.rpm file://./hp/swpackages/hp-firmware-system-a20-2014.09.03-2.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025531.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system hp-firmware-system-a26-2014.11.02-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1432861470/v104438/hp-firmware-system-a26-2014.11.02-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-a26-2014.11.02-1.1.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant BL490c G6 (I21) Servers HP ProLiant BL490c G6 (I21) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) CP021351.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021351.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p609407506/v90082/CP021351.scexe file://./hp/swpackages/CP021351.scexe     Online ROM Flash Component for Linux - HP ProLiant BL280c G6 (I22) Servers HP ProLiant BL280c G6 (I22) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP021101.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021101.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p395263295/v89587/CP021101.scexe file://./hp/swpackages/CP021101.scexe     changed Online ROM Flash Component for Linux - HP ProLiant BL460c G6/WS460c G6 (I24) Servers HP ProLiant BL460c G6/WS460c G6 (I24) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025982.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         For additional information refer to:


    Online ROM Flash User Guide for BL460c G6

    Online ROM Flash User Guide for WS460c G6]]>         firmware:system hp-firmware-system-i24-2015.01.22-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p620045421/v106008/hp-firmware-system-i24-2015.01.22-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-i24-2015.01.22-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL680c G7/BL620c G7 (I25) Servers HP ProLiant BL680c G7/BL620c G7 (I25) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025605.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

     

    ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-i25-2013.07.01-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1324106458/v104646/hp-firmware-system-i25-2013.07.01-2.i386.rpm file://./hp/swpackages/hp-firmware-system-i25-2013.07.01-2.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant BL2x220c G6 (I26) Servers HP ProLiant BL2x220c G6 (I26) Servers Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP021284.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:

    ]]>         firmware:system CP021284.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p810761279/v89963/CP021284.scexe file://./hp/swpackages/CP021284.scexe     changed Online ROM Flash Component for Linux - HP ProLiant BL460c G7 (I27) Servers HP ProLiant BL460c G7 (I27) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 5 (AMD64/EMT64) Oracle Linux 5 (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025601.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>rpm
     
    Change to the directory you see in previous step and run cpqsetup


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

     ]]>         For additional information refer to:
    ]]>         firmware:system hp-firmware-system-i27-2013.07.02-2.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1822573911/v104610/hp-firmware-system-i27-2013.07.02-2.i386.rpm file://./hp/swpackages/hp-firmware-system-i27-2013.07.02-2.i386.rpm     Online ROM Flash Component for Linux - HP ProLiant BL490c G7 (I28) Servers HP ProLiant BL490c G7 (I28) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP021018.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

     

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021018.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p2063750487/v89297/CP021018.scexe file://./hp/swpackages/CP021018.scexe     Online ROM Flash Component for Linux - HP ProLiant BL2x220c G7 (I29) Servers HP ProLiant BL2x220c G7 (I29) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (x86) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) CP021111.scexe Server BIOS - System ROM English (US) To update firmware from Linux operating system on target server:

    1.     Login as root. (You must be root in order to apply the ROM update.)
    2.     Place the Smart Component in a temporary directory.
    3.     From the same directory, run the Smart Component.
              For example: ./CPXXXXXX.scexe
    4.     Follow the directions displayed by the Smart Component to complete the firmware update.
    5.     Reboot your system if you would like the update to take effect immediately.


    To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):  

    1.      Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    2.      Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
    3.      Boot from the newly created USB key.
    4.      Follow the on-screen directions to complete the firmware update.

    ]]>         For additional information refer to:
    ]]>         firmware:system CP021111.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p672857558/v89603/CP021111.scexe file://./hp/swpackages/CP021111.scexe     changed Online ROM Flash Component for Linux - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025456.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         firmware:system hp-firmware-system-i30-2014.11.03-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p855558937/v104176/hp-firmware-system-i30-2014.11.03-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-i30-2014.11.03-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 6 (x86) Oracle Linux 5 (AMD64/EMT64) Red Hat Enterprise Linux 5 Desktop (x86-64) Oracle Linux 5 (x86) Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025363.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         ]]> firmware:system hp-firmware-system-i31-2014.11.02-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p968648544/v103874/hp-firmware-system-i31-2014.11.02-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-i31-2014.11.02-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Oracle Linux 5 (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP025425.scexe Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

    Update the firmware and software in the usual manner.

     

    ]]>         firmware:system hp-firmware-system-i32-2014.11.02-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1232351656/v104037/hp-firmware-system-i32-2014.11.02-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-i32-2014.11.02-1.1.i386.rpm     changed Online ROM Flash Component for Linux - HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 CP026250.scexe Server BIOS - System ROM English (US)
    To update firmware from Linux operating system on target server:
     
    Install the RPM package
    > rpm -Uvh <filename>.rpm
     
    See where the files land
    > rpm -qlp <filename>.rpm
     
    Change to the directory you see in the previous step and run cpqsetup by typing ‘./cpqsetup’ at the command prompt.


    Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.
    Update the firmware and software in the usual manner. ]]>         firmware:system hp-firmware-system-i36-1.32_03_06_2015-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-uefi-sys/p816273448/v106750/hp-firmware-system-i36-1.32_03_06_2015-1.1.i386.rpm file://./hp/swpackages/hp-firmware-system-i36-1.32_03_06_2015-1.1.i386.rpm     new Online HP BladeSystem c-Class Onboard Administrator Firmware Component for Linux Onboard Administrator Firmware Component for Linux Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (Itanium) Red Hat Enterprise Linux 4 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (Itanium) Red Hat Linux 6.2 SUSE LINUX Enterprise Server 11 (Itanium) SUSE LINUX Enterprise Server 10 (Itanium) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (Itanium) Red Hat Enterprise Linux 3 (AMD64/EM64T) Red Hat Enterprise Linux 3 (x86) Red Hat Enterprise Linux 3 (Itanium) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP024478.scexe ServerOptions Server Storage Firmware - Blade Infrastructure English (US), Japanese, Chinese (Simplified) ]]> This component and its firmware can be used in the following scenarios:

    1. As a standalone component that can be used to script the deployment of the Onboard Administrator firmware
    2. In conjunction with the HP Smart Update Manager found on HP Service Pack for ProLiant (SPP), the component can be used to deploy the firmware to the HP BladeSystem c-Class Onboard Administrator
    3. Firmware extracted from the component can be deployed using the web-based user interface for the HP BladeSystem c-Class Onboard Administrator

    Installation Notes for using the component as a standalone component

    This SCEXE component is a self-extracting executable. The SCEXE file unpacks itself, flashes the firmware on the HP BladeSystem c-Class Onboard Administrator, and cleans up.

    The general command line syntax for this smart component is

    sh cpxxxxxx.scexe -target <netAddress> -user <username> -passwd <password> [-s[ilent]] [-f[orce]] [-logdir <path>]

    where cpxxxxxx.scexe represents the filename of the component

    NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.

    • -target <netAddress>          The netAddress parameter is the IP address or DNS name of the OA to target. This should be the Active OA if two OA’s are in an enclosure. There is a space between the -target and the netAddress parameter.
    • -user <username>              The username is the userid to use when attempting to login to the OA. There is a space between the -user and the username parameter.
    • -passwd <password>           The password is the password for the userid to login to the OA. There is a space between the -passwd and the password parameter.
    • -s[ilent]                               The silent option will silently install the firmware, if needed.
    • -f[orce]                               The force option will cause the OA Flash utility to either downgrade the existing firmware or reinstall the same version of firmware on the target OA.
    • -logdir <path>                     This optional parameter is used to redirect the output from the OA flash utility to a
    • different directory than the default location of /var/hp/log/<netAddress>. The redirected location is <path>/hp/log/<netAddress>.

    To flash the firmware:

    • Download the SCEXE file to a server which is on the same network as the HP BladeSystem c-Class Onboard Administrator to be updated.
    • Execute sh cpxxxxxx.scexe -target <netAddress> -user <username> -passwd <password> [-s[ilent]] [-f[orce]] [-logdir <path>]

    The return codes are:

    • 0 Success
    • 1 Reserved
    • 2 Upgrade is not needed because firmware version is current
    • 3 Upgrade is not needed because newer firmware version is present
    • 4 Target not found
    • 5 User terminated session
    • 6 Incorrect parameter
    • 7 General failure

    Installation Notes for using the component with HP Smart Update Manager and the SPP

    1. Obtain the latest version of the SPP.
    2. Place the SPP on a USB key using the HP USB Key Utility.
    3. Place this component in the directory, /hp/swpackages on the USB key.
    4. Place the USB key in a system which is on the same network as the Onboard Administrator to be updated.
    5. Launch hpsum from /hp/swpackages.
    6. Follow the GUI to install the firmware on the Onboard Adminstrator.

    Installation Notes for using the firmware extracted from the component

    1. Extract the firmware binary out of the component.
    2. Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Onboard Administrator.
    3. Log in to the Onboard Administrator's web-based user interface as an administrator. Firmware Update is available under the Active Onboard Administrator category. You may select the firmware image by entering a path to the file in the "Local File" field or by clicking on the "Browse" button to locate the firmware image on the local machine, a mapped drive, or a network share.
    4. Click "Upload" to begin the firmware update process.

    The user guide for the Onboard Administrator is located here.
    The user guide for the Onboard Administrator command line interface is located here.

    ]]>         Deliverable Name:

    HP BladeSystem c-Class Onboard Administrator Firmware

    Release Version:

    Version 4.40

    Previous Version of Firmware:

    Version 4.30

    Firmware Dependency

    For firmware compatibility information please see HP Service Pack for ProLiant Information Library, http://www.hp.com/go/spp/documentation.

     Important Notes

    • EFM
    The OA only supports SPP ISO images that are less than 4 GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB,  the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”

    If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process.  At a minimum, the custom ISO must contain the firmware components for HP ProLiant BL servers. (When using HP SUM to create the custom ISO image, select Firmware as the Component Type, and select HP ProLiant BL Series as the Server Type.)  For information about creating a custom ISO image compatible for OA EFM functionality, see the HP BladeSystem Onboard Administrator User Guide. More HP SUM information can be found via HP Smart Update Manager online help or at http://www.hp.com/go/hpsum/documentation. 
    • FIPS
    OA 3.71 has received FIPS 140-2 Certification  (http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401val2014.htm#2174)  
    • IPv6
    When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations.  A manual reset of the iLO releases these addresses immediately.
    • Security
    Support for several cipher suites has been removed due to the generally acknowledged weakness of the associated encryption algorithms. The OA now supports only the cipher suites listed in the following table. To successfully establish a secure connection to the OA via SSL, clients must support one or more of these cipher suites.
    Note specifically that Windows 2003 Active Directory and Internet Explorer might not successfully connect to the OA due to the lack of default support for at least one of the supported cipher suites listed. You can add the necessary support by installing and enabling Advanced Encryption Standard (AES) based cipher suites in Windows 2003. Refer to Microsoft hotfix available at http://support.microsoft.com/kb/948963.  
    SSL/TLS cipher suites Standard names for SSL/TLS cipher suites
    EDH-RSA-DES-CBC3-SHA TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
    DHE-RSA-AES128-SHA TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    DHE-RSA-AES256-SHA TLS_DHE_RSA_WITH_AES_256_CBC_SHA
    AES128-SHA TLS_RSA_WITH_AES_128_CBC_SHA
    AES256-SHA TLS_RSA_WITH_AES_256_CBC_SHA
    ECDHE-RSA-DES-CBC3-SHA TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
    ECDHE-RSA-AES128-SHA TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
    ECDHE-RSA-AES256-SHA TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
    AES128-GCM-SHA256 TLS_RSA_WITH_AES_128_GCM_SHA256
    AES256-GCM-SHA384 TLS_RSA_WITH_AES_256_GCM_SHA384
    ECDHE-RSA-AES128-SHA256 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
    AES128-SHA256 TLS_RSA_WITH_AES_128_CBC_SHA256
    AES256-SHA256 TLS_RSA_WITH_AES_256_CBC_SHA256
     
     
    Enhancements/New Features


    Problems Fixed
    • General
    • Devices with MAC addresses ending with “81:00” (such as f8:66:f2:6d:81:00) were unable to communicate with the OA. Some examples of the observed symptoms were:
    Attempts to ping the OA from the device fail The OA cannot use such a device as a gateway
    The OA GUI and CLI cannot be used from this device   "CERTS: Failed to open flash"
    This had no functional impact; the entry could be ignored. 
    • Documentation
      •  In the September 2014 (Edition 23) HP BladeSystem Onboard Administrator CLI User Guide for OA 4.30, within the description of the SET HTTP REQUESTREADTIMEOUT command, a command showing recommended values had the BODY MINRATE value as 50 instead of the correct value 500. The command with the correct recommended values is as follows:
    SET HTTP REQUESTREADTIMEOUT HEADER 3-8 MINRATE 500 BODY 5-10 MINRATE 500

    This error was corrected in the October 2014 (Edition 24) document. 
    • EFM
      • In rare cases, the Active OA module would reboot expectedly during the update of the OA firmware on redundant OA modules.  When this issue occurred, the Active OA module would reboot during the transfer of the OA firmware image to the Standby OA module.  The OA firmware update would fail to complete successfully; a segmentation fault (SEGV) error would be logged in the Active OA system log.  This issue did not cause any firmware or data corruption, and the OA firmware update could be successful if retried following the occurrence of this issue. Note that this issue could only be encountered when updating OA modules running OA 4.30 firmware.  
      • Attempts to update the firmware failed on an HP ProLiant Gen9 server blade configured in UEFI Boot Mode or UEFI Optimized Boot Mode. When this failure occurred, the firmware log for the blade server would indicate an error similar to the following for each update attempt, including the two automatic retries that occur on failure:
    Jul 15 09:34:19 Unable to detect ISOLINUX booting.
    A final status report similar to the following would also be issued:
    Jul 15 10:30:33 Firmware Management is incomplete on blade <bay number>.  Unable to mount ISO or validate version information. The URL or ISO is invalid.
    •  CLI commands affected include those that depend on the URL specification via the SET FIRMWARE MANAGEMENT URL command (such as the UPDATE FIRMWARE SERVER command and the UPDATE IMAGE FW_ISO command). 
    •  The EFM firmware log would indicate "Firmware Management successfully completed on blade x" even if the iLO firmware update failed to complete successfully.  
    • IPv6
      • Configuration scripts could not be applied to another OA properly when attempting to configure new EBIPA DNS IPv4/IPv6 addresses or IPv6 routes. Attempts to change the configurations could only add new addresses to those of the previous configuration. It was not possible to replace the existing addresses with the new ones.
    The following CLI commands now include the ALL keyword to allow clearing of all unwanted addresses or routes:
    REMOVE EBIPA SERVER DNS ALL
    REMOVE EBIPAV6 SERVER DNS ALL
    REMOVE OA ROUTE IPV6 <ACTIVE|STANDBY> ALL

    A configuration script can now use these commands to clear the previous (unwanted) EBIPA DNS IP addresses and IPv6 static routes, and then add the new ones. 
    • KVM
      • Pressing Enter four times consecutively on a keyboard attached to the c7000 Enclosure integrated KVM module would cause the highlighted blade server on the KVM screen to power off or on, depending on its current power state. This issue has been fixed by interchanging the Ok/Confirm and Cancel buttons on the Confirm: Change Server Power and Change Server Power screens so that the Cancel button is highlighted by default instead of the OK or Confirm button. The default focus is set on the Cancel button. (QXCR1001357592)
    •  Security
      • The following security vulnerabilities were fixed:
      • This release of the OA resolves this security vulnerability by compiling OpenSSl with OPENSSL_NO_SRTP (the OA does not use DTLS and SRTP).
        • CVE-2014-0139: A vulnerability affecting SSL/TLS transactions that might allow a man-in-the-middle attacker to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certificate Authority.
        • CVE-2014-0015: A vulnerability when more than one authentication method is enabled and NTLM connections are reused, which might allow context-dependent attackers to authenticate as other users via a request.
        • CVE-2014-0138: A vulnerability affecting certain LDAP connections that might allow context-dependent attackers to connect as other users via a request (similar to issue CVE-2014-0015).
        • CVE-2014-2522: A vulnerability when running on Windows and using an SChannel/Winssl TLS backend. When accessing a URL that uses a numerical IP address, curl does not verify that the server host name matches a domain name in the subject’s CN or subjectAltName field of the X.509 certificate. This allows man-in-the-middle attackers to spoof servers via an arbitrary valid certificate.
      • In addition, OpenSSL has been updated to version 1.0.1h to address multiple CVE fixes.
    • SSH/SSL keys
      • With OA firmware later than 4.0x, attempts to add an SSH key using the OA CLI ADD SSH KEY command might fail. Intermittently, after issuing the command, the user received an error message ("The submitted file is not a valid SSH key."), in which case the command failed. 
    • SNMP
    • SNMP alerts (or traps) sent from the OA to an IPv6 SNMP alert destination are sent incorrectly to destination port 161 instead of port 162 (per RFC 1157) when no destination port is explicitly specified as part of an IPv6 SNMP alert destination configuration. 
     Known Issues
    • Browsers
      • SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft® Internet Explorer 11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window.
    This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for  Internet Explorer.  To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer’s settings. This issue occurs only on Internet Explorer browsers.    
    • FIPS
    • Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20.  When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON or DEBUG and is configured with a  1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate.  While operating in this degraded FIPS Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access > FIPS tab will fail and show the error message “The selected FIPS mode is already enabled”.  When the non-compliant certificate is removed, the degraded FIPS operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface.  Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA.

    ]]>         firmware:oa oaupgrade hpoa440.bin hp-firmware-oa-4.40-1.1.i386.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p122335943/v101042/hp-firmware-oa-4.40-1.1.i386.rpm file://./hp/swpackages/hp-firmware-oa-4.40-1.1.i386.rpm CP024478.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p122335943/v101042/CP024478.scexe file://./hp/swpackages/CP024478.scexe     changed HP BladeSystem c-Class Virtual Connect Firmware, Ethernet plus 4/8Gb 20-port and 8/16Gb 24-port FC Edition Component for Linux BladeSystem c-Class Virtual Connect Firmware, Ethernet plus FC Edition Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 5 Server (Itanium) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (Itanium) SUSE LINUX Enterprise Server 10 (Itanium) Red Hat Enterprise Linux 7 Server CP026095.scexe Networking Server Firmware - Blade Infrastructure English (US), Japanese The latest version of HP Virtual Connect Release Notes contains the prerequisites and can also be found in the "User guide" section in the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64180&taskId=135&prodTypeId=3709945&prodSeriesId=4144084

    ]]>         This component and its firmware can be used in the following scenarios:

    1. In conjunction with the HP Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HP BladeSystem c-Class Virtual Connect module.

    2. Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HP BladeSystem c-Class Virtual Connect modules.

    Installation Notes for using the component with HP Smart Update Manager and SPP

    1. Obtain the latest version of HP SPP.
    2. Extract the contents of the SPP ISO, locate the directory, /usb, and run the hpusbkey.exe file.
    3. Place the SPP on a USB key using the HP USB Key Utility
    4. Place this version of the Virtual Connect firmware component in the directory, /hp/swpackages on the USB key.
    5. Place the USB key in a system which is on the same network as the HP BladeSystem c-Class Virtual Connect module to be updated.
    6. Run “launch_hpsum.bat/launch_hpsum.sh” on the SPP from the USB key to launch the HP Smart Update Manager.
    7. Follow the GUI to install the firmware on the Virtual Connect module.

    Installation Notes for using the firmware extracted from the component

    1. Extract the firmware binary out of the component.

    2. Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Virtual Connect module.

    3. Start the Virtual Connect Support Utility and deploy the firmware.

    HP requires using the HP BladeSystem c-Class Virtual Connect Support Utility version 1.11.0 (or higher) to install the HP VC FlexFabric-20/40 F8 version 4.41, HP VC Flex-10/10D version 4.41, HP VC FlexFabric 10Gb/24-port version 4.41, HP VC Flex-10 10Gb version 4.41, HP VC 8Gb 24-Port FC version 3.01, HP VC 16Gb 24-Port FC version 3.01, HP VC 4Gb FC version 2.05, and HP VC 8Gb 20-Port FC version 2.05 firmware. Please read the HP BladeSystem c-Class Virtual Connect Support Utility version 1.11.0 release notes.

    Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.41 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.41 in a Multi-Enclosure setup.

    The HP USB Key Utility is used to copy the SPP onto a portable USB key storage device.  Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only.  If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.

    Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.

    ]]>         The latest version of HP Virtual Connect Release Notes can also be found in the "User guide" section in the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64180&taskId=135&prodTypeId=3709945&prodSeriesId=4144084

    ]]>         firmware:vc4gb firmware:vceth firmware:vc8gb Entry.bsh CP026095.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p558215106/v106280/CP026095.scexe file://./hp/swpackages/CP026095.scexe     Supplemental Update / Online ROM Flash Component for Linux - Smart Array P700m Smart Array P700m Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition Novell NetWare 6.5 Novell NetWare 5.1 SCO OpenServer 5 Cross Operating System Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) Red Hat Enterprise Linux 4 (Itanium) SCO UnixWare 7 Solaris 10 for x86 Systems SCO OpenServer 6 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (Itanium) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (Itanium) Red Hat Enterprise Linux 5 Server (x86-64) VMware ESX/ESXi Server 3.5 Microsoft Windows Server 2008 R2 VMware ESX/ESXi 4.0 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE LINUX Enterprise Server 11 (Itanium) VMware ESX/ESXi 4.1 CP017696.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:

    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.

    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - Smart Array P700m 

    Release Version and/or Date:
          7.24

    Last Recommended or Critical Version:
          7.24

    Previous Version of Firmware:
          7.22

    Firmware Dependency:

    • Updating the HP DL360G5 System ROM to revision P58 3/9/08 or higher is required in addition to updating to this HP Smart Array firmware revision for the modified shutdown sequence to ensure sufficient time for HDD head parking of internal HDDs.
    • Updating the HP MSA 60 and/or MSA 70 firmware version to 2.16 or higher is required to enable dual domain functionality.

    Enhancements/New Features:
             None 

    Problems Fixed:

    • Resolved an issue where the server’s system event log would fill with Event ID 129 warnings and the Smart Array controller would become unresponsive.

    Known Issues:
         None

    ]]>         firmware 103C 3230 103C 323D CP017696.scexe CP017696.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p507048725/v78321/CP017696.scexe file://./hp/swpackages/CP017696.scexe     changed Online HP 6Gb SAS BL Switch Firmware Smart Component for Linux (x86/x64) HP 6Gb SAS BL Switch Firmware (Smart Component for Linux) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 VMware vSphere 6.0 VMware vSphere 5.5 VMware vSphere 5.1 VMware ESXi 5.0 CP025144.scexe Storage Server Firmware - Blade Infrastructure English (US) Installation Instructions:

    To update firmware from Linux operating system on target server:

    • Login as root. (You must be root in order to apply the ROM update.) 
    • Place the Smart Component in a temporary directory. 
    • From the same directory, unpack the smart component, for example: ./CPXXXXXX.scexe --unpack=./unpacked
    • Follow the directions given by the Smart Component if any.

    HP recommends for remote deployment of this package that you obtain the most recent version of the HP Service Pack for ProLiant (SPP) and follow these steps:

    • Place the SPP on a USB key using the HP USB Key Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • From the /hp/swpackages directory, run ./hpsum.
    • Follow the GUI instructions to install the firmware on the remote host.
    ]]>         Deliverable Name:
         Online HP 6Gb SAS BL Switch Firmware Smart Component for Linux (x86/x64)

    Release Version and/or Date:
         4.1.1.0

    Last Recommended or Critical Version:
         4.1.1.0

    Previous Version of Firmware:
         4.0.1.0

    Firmware Dependency:

         The devices listed below require minimum FW deliverables with HP Storage Manager version 4.1.1.0:

    Device, Minimum Recommended Version

    • HP D3600/D3700 Disk Enclosure, 1.00
    • HP D2600/D2700 Disk Enclosure, 0147
    • HP 600 Modular Disk System, 3.60
    • HP D6000 Disk Enclosure, 2.38
    • HP P2000 MSA Array System, TS251P003
    • HP Smart Array P711m/P712m Controller, 5.70
    • HP Smart Array P721m Controller, 3.54

    Enhancements/New Features for FW version 4.1.1.0(B):

    • Added component support for x64 operating systems.

    Problems Fixed:
    The following issues are now resolved:

    • If the switch was assigned a static IP address using the Onboard Administrator EBIPA feature, then the switch might generate continuous Cold Start SNMP traps and overfill logs.
    • A storage enclosure flash operation might fail when run from Virtual Storage Manager (VSM) CLI while the GUI was open.
    • Link rate of a disk was incorrectly displayed in VSM GUI and CLI.
    • In rare cases, multiple resets of a switch would cause the Smart Array to lockup 0xAB.

    Known Issues:
         None
     

    ]]>         firmware:solex6Gb HP6GSASBLSWH Entry.bsh hp-firmware-solex6gb-solex-4.1.1.0-2.i586.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p2041878280/v103099/hp-firmware-solex6gb-solex-4.1.1.0-2.i586.rpm file://./hp/swpackages/hp-firmware-solex6gb-solex-4.1.1.0-2.i586.rpm     HP 3Gb SAS BL Switch Firmware Smart Component for Linux HP 3Gb SAS BL Switch Firmware (Smart Component for Linux) Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) CP015353.scexe ServerOptions Server Firmware - Blade Infrastructure English (US) To update firmware from a Linux operating system on target server:

    1. Login as root. (You must be root in order to apply the updates.) 
    2. Place the Smart Component in a temporary directory. 
    3. Using a terminal session from the same directory, unpack the smart component, for example: ./CPxxxxxx.scexe --unpack=./ will extract the files in the Smart Component into the working directory.
    4. Access the Virtual SAS Manager's GUI or CLI interface to flash the firmware using the image file in the working directory.

    To incorporate this component into the Firmware Maintenance CD version 9.20 or later and update firmware from a Linux operating system using the HP Smart Update Manager:

    1. Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility (Windows only), or any of several Linux utilities which can create a bootable USB key from an ISO image file.   If booting from the key is not required, the files can be extracted to a non-bootable USB key with sufficient space.
    2. For components not included with the Firmware Maintenance CD, place the firmware component to be updated in the /HPFWUP9xx/hp/swpackages folder on the USB key.
    3. Run the ./autorun script from /HPFWUP9xx on the Firmware Maintenance CD from the USB key on a system.
    4. Select the Firmware tab.
    5. Click on the Install Firmware link to launch the HP Smart Update Manager.
    6. Follow the GUI to install the firmware on local or remote hosts.

    PLEASE NOTE:

    • To update the firmware on remote hosts, do not boot from the Firmware Maintenance CD or USB key.
    • To update firmware on remote hosts, such as Onboard Administrators, blade iLOs, SAS switches, etc., refer to the HP Smart Update Manager help documentation available by clicking on the help button and the HP Smart Update Manager User's Guide.   Many features are available for advanced use.   For example, remote host configurations can be stored and retrieved, saving a great deal of time for future firmware updates.
    • The Firmware Maintenance CD has only been tested with Linux distributions supported by HP.
    ]]>         Deliverable Name:
           HP 3Gb SAS BL Switch Firmware Smart Component for Linux

    Release Version and/or Date:
          2.2.17.0

    Last Recommended or Critical Version:
          2.2.15.0

    Previous Version of Firmware:
          2.2.15.0

    Firmware Dependency:
         None

    Enhancements/New Features:

    • The HP 3Gb SAS Switch will now publish external IP addresses to Onboard Administrator versions 3.20 or later instead of the internal IP address.

    Problems Fixed:
             None 

    Known Issues:
         None


    ]]>         firmware:solex Entry.bsh CP015353.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p794447061/v69733/CP015353.scexe file://./hp/swpackages/CP015353.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Cross Operating System VMware vSphere 6.0 CP024707.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives

    Release Version and/or Date:
          HPDG

    Last Recommended or Critical Version:
          HPDG

    Previous Version of Firmware:
          HPDF

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDG (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DG0146FARVU DG0300FARVV DG0300BAMYR DG0146BAMYQ EG0146FAWJC EG0300FAWJD CP024707.scexe hp-firmware-hdd-fdfb5070cf-HPDG-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p936343420/v101702/hp-firmware-hdd-fdfb5070cf-HPDG-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-fdfb5070cf-HPDG-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024708.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives

    Release Version and/or Date:
          HPDJ

    Last Recommended or Critical Version:
          HPDJ

    Previous Version of Firmware:
          HPDH

    Firmware Dependency:  
         None
     

    Enhancements/New Features:
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDJ (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DH0146FAQRE DH0072FAQRD EH0146FAWJB EH0072FAWJA CP024708.scexe hp-firmware-hdd-ca173adbad-HPDJ-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1918858580/v101703/hp-firmware-hdd-ca173adbad-HPDJ-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-ca173adbad-HPDJ-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EF0300FARMU, EF0450FARMV, and EF0600FARNA Drives EF0300FARMU, EF0450FARMV, EF0600FARNA drive Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 Microsoft Windows Server 2012 R2 VMware vSphere 5.1 VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024709.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - EF0300FARMU, EF0450FARMV, and EF0600FARNA drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None

    Enhancements/New Features:
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • HPG6(C) resolved a component installation issue where the drive model, EF0600FARNA, was being detected, but would fail to flash.

    Known Issues:
          None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FARNA EF0450FARMV EF0300FARMU CP024709.scexe hp-firmware-hdd-c7ed905f46-HPD6-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p287871899/v101704/hp-firmware-hdd-c7ed905f46-HPD6-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-c7ed905f46-HPD6-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024710.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives

    Release Version and/or Date:
         HPDB

    Last Recommended or Critical Version:
         HPDB

    Previous Version of Firmware:
         HPDA

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDB (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FATFF EF0450FATFE EF0300FATFD CP024710.scexe hp-firmware-hdd-009c9a2503-HPDB-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p672034870/v101705/hp-firmware-hdd-009c9a2503-HPDB-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-009c9a2503-HPDB-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024711.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish
  • Minimum firmware required - HPD7.  HPDA drive firmware will fail when downgrading to versions below HPD7. 
    • ]]>         To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives

    Release Version and/or Date:
         HPDA

    Last Recommended or Critical Version:
         HPDA

    Previous Version of Firmware:
         HPD9

    Firmware Dependency:

    •      Minimum firmware required - HPD7. HPDA drive firmware will fail when downgrading to versions below HPD7.

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDA (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDBU EG0450FBDBT EG0300FBDBR CP024711.scexe hp-firmware-hdd-f1eafd9715-HPDA-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p513921697/v101706/hp-firmware-hdd-f1eafd9715-HPDA-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-f1eafd9715-HPDA-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024712.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDSR EG0450FBDSQ EG0300FBDSP CP024712.scexe hp-firmware-hdd-06ac84a5d4-HPD6-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p2132191748/v101707/hp-firmware-hdd-06ac84a5d4-HPD6-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-06ac84a5d4-HPD6-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK Drives EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024713.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD7 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBLSK EG0600FBLSH EG0450FBLSF EG0300FBLSE CP024713.scexe hp-firmware-hdd-815e5e101b-HPD7-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p987480731/v101708/hp-firmware-hdd-815e5e101b-HPD7-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-815e5e101b-HPD7-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024714.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives

    Release Version and/or Date:
          HPDC

    Last Recommended or Critical Version:
          HPDC

    Previous Version of Firmware:
          HPD9

    Firmware Dependency:  
         None

    Enhancements/New Features:
         None

    Enhancements/New Features for HPDC (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems fixed:

    • Addressed an issue with an HP Smart Array E200 controller which could fail to discover a drive when more than one identify frame was provided during discovery.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBVFQ EG0300FBVFL EG0600FBVFP EG0450FBVFM CP024714.scexe hp-firmware-hdd-b94f345c05-HPDC-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1135521048/v101709/hp-firmware-hdd-b94f345c05-HPDC-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-b94f345c05-HPDC-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024715.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD5 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FCVBL EG0600FCVBK EG0450FCVBH EG0300FCVBF CP024715.scexe hp-firmware-hdd-415992e26f-HPD5-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1495081675/v101710/hp-firmware-hdd-415992e26f-HPD5-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-415992e26f-HPD5-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG1200FCVBQ Drives EG1200FCVBQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024228.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - EG1200FCVBQ Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS EG1200FCVBQ CP024228.scexe hp-firmware-hdd-33aee979c2-HPD6-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p532981732/v100433/hp-firmware-hdd-33aee979c2-HPD6-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-33aee979c2-HPD6-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0072FARUA and EH0146FARUB Drives EH0072FARUA and EH0146FARUB drives Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2008 x64 VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024717.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0072FARUA and EH0146FARUB drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD9 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up.  This firmware improves signal quality between the drive and the controller.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARUB EH0072FARUA CP024717.scexe hp-firmware-hdd-88df5ee1cd-HPD9-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1138003208/v101712/hp-firmware-hdd-88df5ee1cd-HPD9-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-88df5ee1cd-HPD9-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0072FARWC and EH0146FARWD Drives EH0072FARWC, EH0146FARWD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024718.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0072FARWC and EH0146FARWD Drives

    Release Version and/or Date:
          HPDD

    Last Recommended or Critical Version:
          HPDD

    Previous Version of Firmware:
          HPDC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDD (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARWD EH0072FARWC CP024718.scexe hp-firmware-hdd-92875cb465-HPDD-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p396815591/v101713/hp-firmware-hdd-92875cb465-HPDD-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-92875cb465-HPDD-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0146FBQDC and EH0300FBQDD Drives EH0146FBQDC and EH0300FBQDD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024719.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0146FBQDC and EH0300FBQDD drives

    Release Version and/or Date:
          HPD3

    Last Recommended or Critical Version:
          HPD3

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD3 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD3 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0300FBQDD EH0146FBQDC CP024719.scexe hp-firmware-hdd-1ec3c02013-HPD3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1385428354/v101714/hp-firmware-hdd-1ec3c02013-HPD3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-1ec3c02013-HPD3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0146FCBVB and EH0300FCBVC Drives EH0146FCBVB and EH0300FCBVC drives Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 Microsoft Windows Server 2008 x64 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024720.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - EH0146FCBVB and EH0300FCBVC drives

    Release Version and/or Date:
          HPD4

    Last Recommended or Critical Version:
          HPD4

    Previous Version of Firmware:
          HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware revision reduces the possibility of Uncorrectable Read Errors due to poor writes to the media.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD4(B):

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FCBVB EH0300FCBVC CP024720.scexe hp-firmware-hdd-74df2d6c5c-HPD4-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p865317958/v101715/hp-firmware-hdd-74df2d6c5c-HPD4-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-74df2d6c5c-HPD4-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD Drives EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives Hewlett-Packard Development Company, L.P. Cross Operating System Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024721.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives
     
    Release Version and/or Date:
              HPD9

    Last Recommended or Critical Version:
              HPD9

    Previous Version of Firmware:
              HPD8

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD9 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • In previous firmware revisions when the solid state drive was issued a Report Support Operation Code (RSOC) command (A3h) and the reporting options field was set to 001 , the drive incorrectly responded with 05/24/00 indicating that the RSOC command was not supported. The error was logged in the system log files. The drive should have communicated non-support using the Command Data Parameter (CDP) format. The firmware now complies with the RSOC industry standard specification.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EO0200FBRVV EO0400FBRWA MO0400FBRWC MO0800FBRWD MO0200FBRWB CP024721.scexe hp-firmware-hdd-792f35abb6-HPD9-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1316231922/v101716/hp-firmware-hdd-792f35abb6-HPD9-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-792f35abb6-HPD9-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025058.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives

    Release Version and/or Date:
              HPGD

    Last Recommended or Critical Version:
              HPGD

    Previous Version of Firmware:
          HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Resolved a component installation issue where the drive model, MB2000GCEHK, was being detected, but would fail to flash.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000GCEHK MB1000GCEHH MB0500GCEHF CP025058.scexe hp-firmware-hdd-b583d96f94-HPGD-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1606609650/v102748/hp-firmware-hdd-b583d96f94-HPGD-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-b583d96f94-HPGD-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025060.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives

    Release Version and/or Date:
              HPG3

    Last Recommended or Critical Version:
              HPG3

    Previous Version of Firmware:
          HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Problems Fixed:
    • A correction to address failure to activate LED Activity which occurs during system boot.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000ECWCU MB3000ECWCT MB2000ECWCR MB1000ECWCQ CP025060.scexe hp-firmware-hdd-a92b4196b5-HPG3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1243661407/v102750/hp-firmware-hdd-a92b4196b5-HPG3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-a92b4196b5-HPG3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FAMYU and MB2000FAMYV Drives MB1000FAMYU and MB2000FAMYV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024722.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FAMYU and MB2000FAMYV drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:   
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD7 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • HPD7 (B) resolves an issue with offline flashing where the component would time out during the upgrade process.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FAMYV MB1000FAMYU CP024722.scexe hp-firmware-hdd-2db44cb024-HPD7-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p2059018214/v101717/hp-firmware-hdd-2db44cb024-HPD7-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-2db44cb024-HPD7-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FBZPL and MB2000FBZPN Drives MB1000FBZPL and MB2000FBZPN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024723.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FBZPL and MB2000FBZPN drives

    Release Version and/or Date:
          HPD3

    Last Recommended or Critical Version:
          HPD3

    Previous Version of Firmware:
          HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD3 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FBZPN MB1000FBZPL CP024723.scexe hp-firmware-hdd-b33fedbbdf-HPD3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p154266112/v101718/hp-firmware-hdd-b33fedbbdf-HPD3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-b33fedbbdf-HPD3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK Drives MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024724.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD5 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCWDK MB3000FCWDH MB2000FCWDF MB1000FCWDE CP024724.scexe hp-firmware-hdd-4892d09bcf-HPD5-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1845516849/v101719/hp-firmware-hdd-4892d09bcf-HPD5-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-4892d09bcf-HPD5-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024725.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives

    Release Version and/or Date:
          HPD2

    Last Recommended or Critical Version:
          HPD2

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • This firmware improves reliability by modifying the pivot bearing grease wear leveling algorithm, which if not implemented, could result in an increased drive failure rate for specific usage applications (eg, very long periods of small range seeks). 
    • Enhancements also include performance improvements.

    Enhancements/New Features HPD2(B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems fixed:
         None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCVCB MB3000FCVCA MB2000FCVBV MB1000FCWPP CP024725.scexe hp-firmware-hdd-64ffa21017-HPD2-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p436563356/v101720/hp-firmware-hdd-64ffa21017-HPD2-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-64ffa21017-HPD2-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025062.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • A correction to address failure to activate LED Activity which occurs during system boot.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000GCWDC MB3000GCWDB MB2000GCWDA MB1000GCWCV CP025062.scexe hp-firmware-hdd-a1b08f8a6b-HPGD-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p371442444/v102752/hp-firmware-hdd-a1b08f8a6b-HPGD-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-a1b08f8a6b-HPGD-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000EAZNL Drives MB2000EAZNL drives Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 Microsoft Windows Server 2008 x64 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025064.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000EAZNL drives

    Release Version and/or Date:
        HPG4

    Last Recommended or Critical Version:
        HPG3

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:  
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware contains general maintenance release and code improvement items. Drives built with or upgraded to hard drive firmware version HPG4 should not be downgraded to an earlier version of firmware due to hard drive manufacturing process changes.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA MB2000EAZNL CP025064.scexe hp-firmware-hdd-800c4d6b2e-HPG4-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1461750683/v102754/hp-firmware-hdd-800c4d6b2e-HPG4-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-800c4d6b2e-HPG4-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000EBUCF and MB3000EBUCH Drives MB2000EBUCF and MB3000EBUCH Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025066.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000EBUCF and MB3000EBUCH Drives

    Release Version and/or Date:
        HPG4

    Last Recommended or Critical Version:
        HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000EBUCH MB2000EBUCF CP025066.scexe hp-firmware-hdd-74fefb9767-HPG4-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p41122225/v102756/hp-firmware-hdd-74fefb9767-HPG4-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-74fefb9767-HPG4-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025068.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
     

    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000ECVJK MB3000ECVJH MB2000ECVJF CP025068.scexe hp-firmware-hdd-b923956874-HPG3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p883998937/v102758/hp-firmware-hdd-b923956874-HPG3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-b923956874-HPG3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000FBUCL and MB3000FBUCN Drives MB2000FBUCL and MB3000FBUCN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 Cross Operating System VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024726.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000FBUCL and MB3000FBUCN drives

    Release Version and/or Date:
          HPDA

    Last Recommended or Critical Version:
          HPDA

    Previous Version of Firmware:
          HPD7

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDA (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBUCN MB2000FBUCL CP024726.scexe hp-firmware-hdd-e0a45065fd-HPDA-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p310082909/v101721/hp-firmware-hdd-e0a45065fd-HPDA-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-e0a45065fd-HPDA-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000GBUPB and MB3000GBUCK Drives MB2000GBUPB and MB3000GBUCK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025070.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000GBUPB and MB3000GBUCK Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBUCK MB2000GBUPB CP025070.scexe hp-firmware-hdd-166dc88573-HPG4-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1795182752/v102760/hp-firmware-hdd-166dc88573-HPG4-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-166dc88573-HPG4-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025072.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
     

    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000GCVBU MB3000GCVBT MB2000GCVBR CP025072.scexe hp-firmware-hdd-e4f5b5c9a7-HPG3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1217826214/v102762/hp-firmware-hdd-e4f5b5c9a7-HPG3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-e4f5b5c9a7-HPG3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB3000EBKAB Drives MB3000EBKAB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025074.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB3000EBKAB Drives

    Release Version and/or Date:
              HPG6

    Last Recommended or Critical Version:
              HPG6

    Previous Version of Firmware:
          HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPG6 prevents this condition from occurring.
    • This firmware corrects “command timeouts” and seek errors which can result in poor performance or a Device Fault condition, the latter of which will result in the drive failed by the Controller or sub system.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.
     Known Issues:
         None]]>         firmware:SATA MB3000EBKAB CP025074.scexe hp-firmware-hdd-3675aa63c9-HPG6-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1951047147/v102764/hp-firmware-hdd-3675aa63c9-HPG6-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-3675aa63c9-HPG6-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000FCQPF and MB3000FBNWV Drives MB2000FCQPF and MB3000FBNWV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024229.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000FCQPF and MB3000FBNWV Drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
         HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware provides performance improvements for large transfer sequential write burst workloads.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features HPD7(B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a condition in which data failed to be written to media after the host issued a hard reset in a lab stress test environment with write cache enabled.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBNWV MB2000FCQPF CP024229.scexe hp-firmware-hdd-52de99d707-HPD7-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p902705184/v100434/hp-firmware-hdd-52de99d707-HPD7-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-52de99d707-HPD7-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MB2000GCQXQ and MB3000GBKAC Drives MB2000GCQXQ and MB3000GBKAC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025076.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000GCQXQ and MB3000GBKAC Drives

    Release Version and/or Date:
         HPGJ

    Last Recommended or Critical Version:
         HPGJ

    Previous Version of Firmware:
         HPGF

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGJ prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBKAC MB2000GCQXQ CP025076.scexe hp-firmware-hdd-c9026c29f7-HPGJ-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p475386816/v102766/hp-firmware-hdd-c9026c29f7-HPGJ-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-c9026c29f7-HPGJ-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MM0500FAMYT Drives MM0500FAMYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024727.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - MM0500FAMYT drive

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD6 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS MM0500FAMYT CP024727.scexe hp-firmware-hdd-ff472f94c8-HPD6-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p213988568/v101722/hp-firmware-hdd-ff472f94c8-HPD6-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-ff472f94c8-HPD6-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MM0500FBFVQ and MM1000FBFVR Drives MM0500FBFVQ and MM1000FBFVR Drives Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2008 x64 Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024728.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - MM0500FBFVQ and MM1000FBFVR drives

    Release Version and/or Date:
          HPD8

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD8 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD8 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MM1000FBFVR MM0500FBFVQ CP024728.scexe hp-firmware-hdd-4b3e11848c-HPD8-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p614683046/v101723/hp-firmware-hdd-4b3e11848c-HPD8-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-4b3e11848c-HPD8-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MM0500GBKAK and MM1000GBKAL Drives MM0500GBKAK and MM1000GBKAL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025080.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MM0500GBKAK and MM1000GBKAL Drives

    Release Version and/or Date:
              HPGC

    Last Recommended or Critical Version:
              HPGC

    Previous Version of Firmware:
          HPGB

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGC prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MM1000GBKAL MM0500GBKAK CP025080.scexe hp-firmware-hdd-a08f92a4f9-HPGC-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p837653709/v102770/hp-firmware-hdd-a08f92a4f9-HPGC-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-a08f92a4f9-HPGC-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ Drives MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives Hewlett-Packard Development Company, L.P. Cross Operating System Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP024230.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives
     
    Release Version and/or Date:
              HPD3

    Last Recommended or Critical Version:
              HPD3

    Previous Version of Firmware:
              HPD2

    Firmware Dependency:
             None

    Enhancements/New Features:
             None

    Enhancements/New Features for HPD3 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This maintenance firmware fixes a rare occurrence where the drive would stop communicating with the HOST while recovering from an internal reset.  Due to the device being non-responsive the device was marked as failed by the controller. 

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MO0200FCTRN MO0400FCTRP MO0800FCTRQ CP024230.scexe hp-firmware-hdd-37893275d3-HPD3-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p399517550/v100435/hp-firmware-hdd-37893275d3-HPD3-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-37893275d3-HPD3-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - VB0160EAVEQ and VB0160CBCDE Drives VB0160EAVEQ and VB0160CBCDE Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025082.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - VB0160EAVEQ and VB0160CBCDE Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA VB0160EAVEQ VB0160CBCDE CP025082.scexe hp-firmware-hdd-181eec78ee-HPG9-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p947234200/v102772/hp-firmware-hdd-181eec78ee-HPG9-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-181eec78ee-HPG9-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - VB0250EAVER Drives VB0250EAVER Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025084.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - VB0250EAVER Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.

    Known Issues:
         None

    ]]>         firmware:SATA VB0250EAVER CP025084.scexe hp-firmware-hdd-e6bc718d4e-HPG9-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1761366327/v102774/hp-firmware-hdd-e6bc718d4e-HPG9-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-e6bc718d4e-HPG9-2.x86_64.rpm     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 6.0 CP025078.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         NA

    Previous Version of Firmware:
             NA

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed: 
    • This maintenance release corrects a failure seen during a HP Insight Diagnostic hard drive test. The failure was due to Device Extended Self-Test not completing in the drives advertised Self-Test completion time. This failure is not an indication that the drive is bad or marginal.
    • Linux Smart Component fails to update firmware on SATA drive connected behind a SATA HBA controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.
     Known Issues:
         None
    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MK0100GCTYU MK0200GCTYV MK0400GCTZA MK0800GCTZB CP025078.scexe hp-firmware-hdd-b2d9e3a264-HPG4-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p166666299/v102768/hp-firmware-hdd-b2d9e3a264-HPG4-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-b2d9e3a264-HPG4-2.x86_64.rpm     Supplemental Update / Online ROM Flash Component for Linux - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022308.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives

    Release Version and/or Date:
          HPDG

    Last Recommended or Critical Version:
          HPDG

    Previous Version of Firmware:
          HPDF

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS DG0146FARVU DG0300FARVV DG0300BAMYR DG0146BAMYQ EG0146FAWJC EG0300FAWJD CP022308.scexe CP022308.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p823447275/v93815/CP022308.scexe file://./hp/swpackages/CP022308.scexe     Supplemental Update / Online ROM Flash Component for Linux - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022309.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives

    Release Version and/or Date:
          HPDJ

    Last Recommended or Critical Version:
          HPDJ

    Previous Version of Firmware:
          HPDH

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS DH0146FAQRE DH0072FAQRD EH0146FAWJB EH0072FAWJA CP022309.scexe CP022309.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1761940064/v93816/CP022309.scexe file://./hp/swpackages/CP022309.scexe     Supplemental Update / Online ROM Flash Component for Linux - EF0300FARMU, EF0450FARMV, and EF0600FARNA drives EF0300FARMU, EF0450FARMV, EF0600FARNA drive Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware vSphere 5.1 VMware vSphere 5.5 CP022310.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - EF0300FARMU, EF0450FARMV, and EF0600FARNA drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None

    Enhancements/New Features:
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • HPG6(C) resolved a component installation issue where the drive model, EF0600FARNA, was being detected, but would fail to flash.

    Known Issues:
          None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EF0600FARNA EF0450FARMV EF0300FARMU CP022310.scexe CP022310.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p2035475902/v93817/CP022310.scexe file://./hp/swpackages/CP022310.scexe     Supplemental Update / Online ROM Flash Component for Linux - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022311.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives

    Release Version and/or Date:
         HPDB

    Last Recommended or Critical Version:
         HPDB

    Previous Version of Firmware:
         HPDA

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EF0600FATFF EF0450FATFE EF0300FATFD CP022311.scexe CP022311.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p338841223/v93818/CP022311.scexe file://./hp/swpackages/CP022311.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Small Business Server 2011 Standard and Essentials Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022312.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish
  • Minimum firmware required - HPD7.  HPDA drive firmware will fail when downgrading to versions below HPD7. 
    • ]]>         To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives

    Release Version and/or Date:
         HPDA

    Last Recommended or Critical Version:
         HPDA

    Previous Version of Firmware:
         HPD9

    Firmware Dependency:

    •      Minimum firmware required - HPD7. HPDA drive firmware will fail when downgrading to versions below HPD7.

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EG0600FBDBU EG0450FBDBT EG0300FBDBR CP022312.scexe CP022312.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p383697945/v93819/CP022312.scexe file://./hp/swpackages/CP022312.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022313.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS EG0600FBDSR EG0450FBDSQ EG0300FBDSP CP022313.scexe CP022313.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p841814644/v93820/CP022313.scexe file://./hp/swpackages/CP022313.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022314.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FBLSK EG0600FBLSH EG0450FBLSF EG0300FBLSE CP022314.scexe CP022314.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p176416113/v93821/CP022314.scexe file://./hp/swpackages/CP022314.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 CP022316.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FCVBL EG0600FCVBK EG0450FCVBH EG0300FCVBF CP022316.scexe CP022316.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1955349045/v93823/CP022316.scexe file://./hp/swpackages/CP022316.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG1200FCVBQ drives EG1200FCVBQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022317.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - EG1200FCVBQ Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:SAS EG1200FCVBQ CP022317.scexe CP022317.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1354168777/v93824/CP022317.scexe file://./hp/swpackages/CP022317.scexe     Supplemental Update / Online ROM Flash Component for Linux - EH0072FARUA and EH0146FARUB drives EH0072FARUA and EH0146FARUB drives Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022318.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - EH0072FARUA and EH0146FARUB drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up.  This firmware improves signal quality between the drive and the controller.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0146FARUB EH0072FARUA CP022318.scexe CP022318.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1770658662/v93825/CP022318.scexe file://./hp/swpackages/CP022318.scexe     Supplemental Update / Online ROM Flash Component for Linux - EH0072FARWC and EH0146FARWD Drives EH0072FARWC, EH0146FARWD Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022319.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - EH0072FARWC and EH0146FARWD Drives

    Release Version and/or Date:
          HPDD

    Last Recommended or Critical Version:
          HPDD

    Previous Version of Firmware:
          HPDC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0146FARWD EH0072FARWC CP022319.scexe CP022319.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p625378910/v93826/CP022319.scexe file://./hp/swpackages/CP022319.scexe     Supplemental Update / Online ROM Flash Component for Linux - EH0146FBQDC and EH0300FBQDD drives EH0146FBQDC and EH0300FBQDD drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022320.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - EH0146FBQDC and EH0300FBQDD drives

    Release Version and/or Date:
          HPD3

    Last Recommended or Critical Version:
          HPD3

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD3 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS EH0300FBQDD EH0146FBQDC CP022320.scexe CP022320.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p861800777/v93827/CP022320.scexe file://./hp/swpackages/CP022320.scexe     Supplemental Update / Online ROM Flash Component for Linux - EH0146FCBVB and EH0300FCBVC drives EH0146FCBVB and EH0300FCBVC drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 Foundation Edition VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022321.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - EH0146FCBVB and EH0300FCBVC drives

    Release Version and/or Date:
          HPD4

    Last Recommended or Critical Version:
          HPD4

    Previous Version of Firmware:
          HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware revision reduces the possibility of Uncorrectable Read Errors due to poor writes to the media.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EH0146FCBVB EH0300FCBVC CP022321.scexe CP022321.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1244590016/v93828/CP022321.scexe file://./hp/swpackages/CP022321.scexe     Supplemental Update / Online ROM Flash Component for Linux - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives Hewlett-Packard Development Company, L.P. Cross Operating System Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022322.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives
     
    Release Version and/or Date:
              HPD9

    Last Recommended or Critical Version:
              HPD9

    Previous Version of Firmware:
              HPD8

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • In previous firmware revisions when the solid state drive was issued a Report Support Operation Code (RSOC) command (A3h) and the reporting options field was set to 001 , the drive incorrectly responded with 05/24/00 indicating that the RSOC command was not supported. The error was logged in the system log files. The drive should have communicated non-support using the Command Data Parameter (CDP) format. The firmware now complies with the RSOC industry standard specification.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS firmware:SAS EO0200FBRVV EO0400FBRWA MO0400FBRWC MO0800FBRWD MO0200FBRWB CP022322.scexe CP022322.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p542437243/v93829/CP022322.scexe file://./hp/swpackages/CP022322.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022323.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives

    Release Version and/or Date:
              HPGD

    Last Recommended or Critical Version:
              HPGD

    Previous Version of Firmware:
          HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
    • HPGD (D) resolved a component installation issue where the drive model, MB2000GCEHK, was being detected, but would fail to flash.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000GCEHK MB1000GCEHH MB0500GCEHF CP022323.scexe CP022323.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1369682094/v93830/CP022323.scexe file://./hp/swpackages/CP022323.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022324.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives

    Release Version and/or Date:
              HPG3

    Last Recommended or Critical Version:
              HPG3

    Previous Version of Firmware:
          HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Problems Fixed:
    • A correction to address failure to activate LED Activity which occurs during system boot.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000ECWCU MB3000ECWCT MB2000ECWCR MB1000ECWCQ CP022324.scexe CP022324.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p408811159/v93831/CP022324.scexe file://./hp/swpackages/CP022324.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000FAMYU and MB2000FAMYV Drives MB1000FAMYU and MB2000FAMYV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022325.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB1000FAMYU and MB2000FAMYV drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:   
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • HPD7 (B) resolves an issue with offline flashing where the component would time out during the upgrade process.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS MB2000FAMYV MB1000FAMYU CP022325.scexe CP022325.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p323512590/v93832/CP022325.scexe file://./hp/swpackages/CP022325.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000FBZPL and MB2000FBZPN drives MB1000FBZPL and MB2000FBZPN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022326.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB1000FBZPL and MB2000FBZPN drives

    Release Version and/or Date:
          HPD3

    Last Recommended or Critical Version:
          HPD3

    Previous Version of Firmware:
          HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS MB2000FBZPN MB1000FBZPL CP022326.scexe CP022326.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p765401284/v93833/CP022326.scexe file://./hp/swpackages/CP022326.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 CP022327.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS MB4000FCWDK MB3000FCWDH MB2000FCWDF MB1000FCWDE CP022327.scexe CP022327.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1280496480/v93834/CP022327.scexe file://./hp/swpackages/CP022327.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022328.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

         •       A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000GCWDC MB3000GCWDB MB2000GCWDA MB1000GCWCV CP022328.scexe CP022328.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1645065052/v93835/CP022328.scexe file://./hp/swpackages/CP022328.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000EAZNL drives MB2000EAZNL drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Cross Operating System VMware ESXi 5.0 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 Foundation Edition VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022329.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000EAZNL drives

    Release Version and/or Date:
        HPG4

    Last Recommended or Critical Version:
        HPG3

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:  
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware contains general maintenance release and code improvement items. Drives built with or upgraded to hard drive firmware version HPG4 should not be downgraded to an earlier version of firmware due to hard drive manufacturing process changes.

    Known Issues:
         None

    ]]>         firmware:SATA MB2000EAZNL CP022329.scexe CP022329.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1134089116/v93836/CP022329.scexe file://./hp/swpackages/CP022329.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000EBUCF and MB3000EBUCH Drives MB2000EBUCF and MB3000EBUCH Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022330.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000EBUCF and MB3000EBUCH Drives

    Release Version and/or Date:
        HPG4

    Last Recommended or Critical Version:
        HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000EBUCH MB2000EBUCF CP022330.scexe CP022330.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1921057629/v93837/CP022330.scexe file://./hp/swpackages/CP022330.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000FBUCL and MB3000FBUCN drives MB2000FBUCL and MB3000FBUCN drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022332.scexe Storage Firmware - SAS Storage Disk English (US) To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000FBUCL and MB3000FBUCN drives

    Release Version and/or Date:
          HPDA

    Last Recommended or Critical Version:
          HPDA

    Previous Version of Firmware:
          HPD7

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB3000FBUCN MB2000FBUCL CP022332.scexe CP022332.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p79294763/v93839/CP022332.scexe file://./hp/swpackages/CP022332.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000GBUPB and MB3000GBUCK drives MB2000GBUPB and MB3000GBUCK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022333.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB2000GBUPB and MB3000GBUCK Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBUCK MB2000GBUPB CP022333.scexe CP022333.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1263188526/v93840/CP022333.scexe file://./hp/swpackages/CP022333.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB3000EBKAB Drives MB3000EBKAB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022335.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MB3000EBKAB Drives

    Release Version and/or Date:
              HPG6

    Last Recommended or Critical Version:
              HPG6

    Previous Version of Firmware:
          HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPG6 prevents this condition from occurring.
    • This firmware corrects “command timeouts” and seek errors which can result in poor performance or a Device Fault condition, the latter of which will result in the drive failed by the Controller or sub system.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.
     Known Issues:
         None]]>         firmware:SATA MB3000EBKAB CP022335.scexe CP022335.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p949380872/v93842/CP022335.scexe file://./hp/swpackages/CP022335.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000FCQPF and MB3000FBNWV Drives MB2000FCQPF and MB3000FBNWV Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022336.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for Linux - MB2000FCQPF and MB3000FBNWV Drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
         HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware provides performance improvements for large transfer sequential write burst workloads.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware prevents a condition in which data failed to be written to media after the host issued a hard reset in a lab stress test environment with write cache enabled.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MB3000FBNWV MB2000FCQPF CP022336.scexe CP022336.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1625832927/v93843/CP022336.scexe file://./hp/swpackages/CP022336.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000GCQXQ and MB3000GBKAC Drives MB2000GCQXQ and MB3000GBKAC Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022337.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000GCQXQ and MB3000GBKAC Drives

    Release Version and/or Date:
         HPGJ

    Last Recommended or Critical Version:
         HPGJ

    Previous Version of Firmware:
         HPGF

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGJ prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBKAC MB2000GCQXQ CP022337.scexe CP022337.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p771460420/v93844/CP022337.scexe file://./hp/swpackages/CP022337.scexe     Supplemental Update / Online ROM Flash Component for Linux - MM0500FAMYT Drives MM0500FAMYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022338.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MM0500FAMYT drive

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD6 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS MM0500FAMYT CP022338.scexe CP022338.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1008830755/v93845/CP022338.scexe file://./hp/swpackages/CP022338.scexe     Supplemental Update / Online ROM Flash Component for Linux - MM0500FBFVQ and MM1000FBFVR Drives MM0500FBFVQ and MM1000FBFVR Drives Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Cross Operating System Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022339.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MM0500FBFVQ and MM1000FBFVR drives

    Release Version and/or Date:
          HPD8

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD8 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS MM1000FBFVR MM0500FBFVQ CP022339.scexe CP022339.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p123204627/v93846/CP022339.scexe file://./hp/swpackages/CP022339.scexe     Supplemental Update / Online ROM Flash Component for Linux - MM0500GBKAK and MM1000GBKAL Drives MM0500GBKAK and MM1000GBKAL Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022340.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MM0500GBKAK and MM1000GBKAL Drives

    Release Version and/or Date:
              HPGC

    Last Recommended or Critical Version:
              HPGC

    Previous Version of Firmware:
          HPGB

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGC prevents this condition from occurring.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MM1000GBKAL MM0500GBKAK CP022340.scexe CP022340.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1437614987/v93847/CP022340.scexe file://./hp/swpackages/CP022340.scexe     Supplemental Update / Online ROM Flash Component for Linux - VB0160EAVEQ and VB0160CBCDE Drives VB0160EAVEQ and VB0160CBCDE Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022342.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - VB0160EAVEQ and VB0160CBCDE Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA VB0160EAVEQ VB0160CBCDE CP022342.scexe CP022342.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1108394816/v93849/CP022342.scexe file://./hp/swpackages/CP022342.scexe     Supplemental Update / Online ROM Flash Component for Linux - VB0250EAVER Drives VB0250EAVER Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022343.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - VB0250EAVER Drives

    Release Version and/or Date:
         HPG9

    Last Recommended or Critical Version:
         HPG9

    Previous Version of Firmware:
         HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot. This behavior appears as if the drive is no longer attached to the system following the system soft reboot. It is most often observed during Operating System Installation but can occur following any system soft reboot.
    • Flashing drives connected behind an HP H2xx Host Bus Adapter (HBA) no longer causes an interrupt resulting in drive firmware installation failures.

    Known Issues:
         None

    ]]>         firmware:SATA VB0250EAVER CP022343.scexe CP022343.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p894551913/v93850/CP022343.scexe file://./hp/swpackages/CP022343.scexe     Supplemental Update / Online ROM Flash Component for Linux - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives Hewlett-Packard Development Company, L.P. Cross Operating System Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022800.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives
     
    Release Version and/or Date:
              HPD3

    Last Recommended or Critical Version:
              HPD3

    Previous Version of Firmware:
              HPD2

    Firmware Dependency:
             None

    Enhancements/New Features:
             None

    Problems Fixed:

    • This maintenance firmware fixes a rare occurrence where the drive would stop communicating with the HOST while recovering from an internal reset.  Due to the device being non-responsive the device was marked as failed by the controller. 

    Known Issues:
             None

    ]]>         firmware:SAS firmware:SAS firmware:SAS MO0200FCTRN MO0400FCTRP MO0800FCTRQ CP022800.scexe CP022800.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p710743543/v95481/CP022800.scexe file://./hp/swpackages/CP022800.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition CP022640.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000ECVJK MB3000ECVJH MB2000ECVJF CP022640.scexe CP022640.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1117540848/v94984/CP022640.scexe file://./hp/swpackages/CP022640.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition CP022643.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000GCVBU MB3000GCVBT MB2000GCVBR CP022643.scexe CP022643.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1278271254/v94988/CP022643.scexe file://./hp/swpackages/CP022643.scexe     Supplemental Update / Online ROM Flash Component for Linux - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022638.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives

    Release Version and/or Date:
          HPD2

    Last Recommended or Critical Version:
          HPD2

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • This firmware improves reliability by modifying the pivot bearing grease wear leveling algorithm, which if not implemented, could result in an increased drive failure rate for specific usage applications (eg, very long periods of small range seeks). 
    • Enhancements also include performance improvements.

    Problems fixed:
         None

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS MB4000FCVCB MB3000FCVCA MB2000FCVBV MB1000FCWPP CP022638.scexe CP022638.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p2094885162/v94982/CP022638.scexe file://./hp/swpackages/CP022638.scexe     Supplemental Update / Online ROM Flash Component for Linux - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 5.1 Microsoft Windows Server 2012 R2 CP022698.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
         Supplemental Update / Online ROM Flash Component for Linux - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         NA

    Previous Version of Firmware:
             NA

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed: 
    • This maintenance release corrects a failure seen during a HP Insight Diagnostic hard drive test. The failure was due to Device Extended Self-Test not completing in the drives advertised Self-Test completion time. This failure is not an indication that the drive is bad or marginal.
     Known Issues:
         None
    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MK0100GCTYU MK0200GCTYV MK0400GCTZA MK0800GCTZB CP022698.scexe CP022698.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p345134435/v95127/CP022698.scexe file://./hp/swpackages/CP022698.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ drives EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials VMware ESXi 5.0 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 CP022569.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
       Supplemental Update / Online ROM Flash Component for Linux - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives

    Release Version and/or Date:
          HPDC

    Last Recommended or Critical Version:
          HPDC

    Previous Version of Firmware:
          HPD9

    Firmware Dependency:  
         None

    Enhancements/New Features:
         None

    Problems fixed:

    • Addressed an issue with an HP Smart Array E200 controller which could fail to discover a drive when more than one identify frame was provided during discovery.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS firmware:SAS firmware:SAS EG0900FBVFQ EG0300FBVFL EG0600FBVFP EG0450FBVFM CP022569.scexe CP022569.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1642417884/v94743/CP022569.scexe file://./hp/swpackages/CP022569.scexe     Supplemental Update / Online ROM Flash Component for Linux - EG0900FDJYR and EG1200FDJYT Drives EG0900FDJYR and EG1200FDJYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 SUSE LINUX Enterprise Server 10 (x86) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) Microsoft Windows Server 2008 R2 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Server (x86) Cross Operating System VMware ESX/ESXi 4.0 Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Small Business Server 2011 Standard and Essentials Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 Edition VMware ESX/ESXi 4.1 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 CP023451.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using theHP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux - EG0900FDJYR and EG1200FDJYT drives

    Release Version and/or Date:
          HPD1

    Last Recommended or Critical Version:
          HPD1

    Previous Version of Firmware:
          HPD0

    Firmware Dependency:    
         None 

    Enhancements/New Features:
         None

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.

    Known Issues:
         None

    ]]>         firmware:SAS firmware:SAS EG1200FDJYT EG0900FDJYR CP023451.scexe CP023451.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1732644733/v97794/CP023451.scexe file://./hp/swpackages/CP023451.scexe     changed Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0900FDJYR and EG1200FDJYT Drives EG0900FDJYR and EG1200FDJYT Drives Hewlett-Packard Development Company, L.P. Microsoft Windows Server 2008 x64 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Cross Operating System VMware vSphere 6.0 CP024716.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To update firmware from Linux operating system on target server:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Reboot your system if you would like the update to take effect immediately.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using theHP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Online:
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the desired firmware to be updated in the directory, /hp/swpackages
    • Locate Start.html which is found in the root of the ISO
    • Open the html file in a supported browser
    • Follow the instructions on the screen
    ]]>         Deliverable Name:
          Supplemental Update / Online ROM Flash Component for Linux (x64) - EG0900FDJYR and EG1200FDJYT drives

    Release Version and/or Date:
          HPD1

    Last Recommended or Critical Version:
          HPD1

    Previous Version of Firmware:
          HPD0

    Firmware Dependency:    
         None 

    Enhancements/New Features:

    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD1 (B): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EG1200FDJYT EG0900FDJYR CP024716.scexe hp-firmware-hdd-7cfa9118b1-HPD1-2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p564143864/v101711/hp-firmware-hdd-7cfa9118b1-HPD1-2.x86_64.rpm file://./hp/swpackages/hp-firmware-hdd-7cfa9118b1-HPD1-2.x86_64.rpm     changed Online ROM Flash Component for VMware ESXi - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024948.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - DH0072FAQRD, DH0146FAQRE, EH0146FAWJB, and EH0072FAWJA Drives

    Release Version and/or Date:
          HPDJ

    Last Recommended or Critical Version:
          HPDJ

    Previous Version of Firmware:
          HPDH

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDJ (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DH0146FAQRE DH0072FAQRD EH0146FAWJB EH0072FAWJA CP024948.scexe CP024948.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p99938071/v102391/CP024948.scexe file://./hp/swpackages/CP024948.scexe     changed Online ROM Flash Component for VMware ESXi - EF0300FARMU, EF0450FARMV, EF0600FARNA drive EF0300FARMU, EF0450FARMV, EF0600FARNA drive Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024949.scexe Storage Firmware - SAS Storage Disk English (US), French, Italian, German, Spanish, Japanese To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - EF0300FARMU, EF0450FARMV, EF0600FARNA drive

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
          None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FARNA EF0450FARMV EF0300FARMU CP024949.scexe CP024949.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1606884532/v102392/CP024949.scexe file://./hp/swpackages/CP024949.scexe     changed Online ROM Flash Component for VMware ESXi - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024950.scexe Storage Firmware - SAS Storage Disk English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - EF0300FATFD, EF0450FATFE, and EF0600FATFF Drives

    Release Version and/or Date:
         HPDB

    Last Recommended or Critical Version:
         HPDB

    Previous Version of Firmware:
         HPDA

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDB (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EF0600FATFF EF0450FATFE EF0300FATFD CP024950.scexe CP024950.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1753573975/v102393/CP024950.scexe file://./hp/swpackages/CP024950.scexe     changed Online ROM Flash Component for VMware ESXi - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024951.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - EG0300FBDBR, EG0450FBDBT and EG0600FBDBU Drives

    Release Version and/or Date:
         HPDA

    Last Recommended or Critical Version:
         HPDA

    Previous Version of Firmware:
         HPD9

    Firmware Dependency:

    • Minimum firmware required - HPD7. HPDA drive firmware will fail when downgrading to versions below HPD7.

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDA (E): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDBU EG0450FBDBT EG0300FBDBR CP024951.scexe CP024951.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p451578015/v102394/CP024951.scexe file://./hp/swpackages/CP024951.scexe     changed Online ROM Flash Component for VMware ESXi - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024952.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
        Online ROM Flash Component for VMware ESXi - EG0300FBDSP, EG0450FBDSQ, and EG0600FBDSR Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
              None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD6 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up. This firmware improves signal quality between the drive and the controller.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0600FBDSR EG0450FBDSQ EG0300FBDSP CP024952.scexe CP024952.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p48048119/v102395/CP024952.scexe file://./hp/swpackages/CP024952.scexe     changed Online ROM Flash Component for VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024953.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD7 (D): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBLSK EG0600FBLSH EG0450FBLSF EG0300FBLSE CP024953.scexe CP024953.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p649451016/v102396/CP024953.scexe file://./hp/swpackages/CP024953.scexe     changed Online ROM Flash Component for VMware ESXi - EH0072FARUA and EH0146FARUB drives EH0072FARUA and EH0146FARUB drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024957.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - EH0072FARUA and EH0146FARUB drives

    Release Version and/or Date:
          HPD9

    Last Recommended or Critical Version:
          HPD9

    Previous Version of Firmware:
          HPD8

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD9 (D): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed: 

    • This firmware reduces the possibility of the controller and drive not properly negotiating link signaling, resulting in the controller not being able to identify a drive attached to a particular port/slot during system boot up.  This firmware improves signal quality between the drive and the controller.  

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARUB EH0072FARUA CP024957.scexe CP024957.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1924380455/v102400/CP024957.scexe file://./hp/swpackages/CP024957.scexe     changed Online ROM Flash Component for VMware ESXi - EH0072FARWC and EH0146FARWD Drives EH0072FARWC, EH0146FARWD Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024958.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - EH0072FARWC and EH0146FARWD Drives

    Release Version and/or Date:
         HPDD

    Last Recommended or Critical Version:
         HPDD

    Previous Version of Firmware:
         HPDC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDD (D): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0146FARWD EH0072FARWC CP024958.scexe CP024958.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p2103902951/v102401/CP024958.scexe file://./hp/swpackages/CP024958.scexe     changed Online ROM Flash Component for VMware ESXi - EH0146FBQDC and EH0300FBQDD drives EH0146FBQDC and EH0300FBQDD drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024959.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - EH0146FBQDC and EH0300FBQDD drives

    Release Version and/or Date:
          HPD3

    Last Recommended or Critical Version:
          HPD3

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD3 (D): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.
    • During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a “SMART Imminent Failure” or “Predictive Failure” message. Firmware version HPD3 prevents the drive from counting these false errors and eliminates the unwarranted SMART "Imminent Failure” or “Predictive Failure” message. 

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0300FBQDD EH0146FBQDC CP024959.scexe CP024959.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p2008934823/v102402/CP024959.scexe file://./hp/swpackages/CP024959.scexe     changed Online ROM Flash Component for VMware ESXi - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024961.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - EO0200FBRVV, MO0200FBRWB, EO0400FBRWA, MO0400FBRWC, and MO0800FBRWD drives
     
    Release Version and/or Date:
             HPD9

    Last Recommended or Critical Version:
             HPD9

    Previous Version of Firmware:
             HPD8

    Firmware Dependency:
             None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD9 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • In previous firmware revisions when the solid state drive was issued a Report Support Operation Code (RSOC) command (A3h) and the reporting options field was set to 001 , the drive incorrectly responded with 05/24/00 indicating that the RSOC command was not supported. The error was logged in the system log files. The drive should have communicated non-support using the Command Data Parameter (CDP) format. The firmware now complies with the RSOC industry standard specification.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EO0200FBRVV EO0400FBRWA MO0400FBRWC MO0800FBRWD MO0200FBRWB CP024961.scexe CP024961.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p299911955/v102404/CP024961.scexe file://./hp/swpackages/CP024961.scexe     changed Online ROM Flash Component for VMware ESXi - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025057.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB0500GCEHF, MB1000GCEHH, and MB2000GCEHK Drives

    Release Version and/or Date:
              HPGD

    Last Recommended or Critical Version:
              HPGD

    Previous Version of Firmware:
          HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000GCEHK MB1000GCEHH MB0500GCEHF CP025057.scexe CP025057.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p601728055/v102747/CP025057.scexe file://./hp/swpackages/CP025057.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000FAMYU and MB2000FAMYV Drives MB1000FAMYU and MB2000FAMYV Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024962.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - MB1000FAMYU and MB2000FAMYV drives

    Release Version and/or Date:
          HPD7

    Last Recommended or Critical Version:
          HPD7

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:   
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD7 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FAMYV MB1000FAMYU CP024962.scexe CP024962.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p323672281/v102405/CP024962.scexe file://./hp/swpackages/CP024962.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000FBZPL and MB2000FBZPN drives MB1000FBZPL and MB2000FBZPN drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024963.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - MB1000FBZPL and MB2000FBZPN drives

    Release Version and/or Date:
         HPD3

    Last Recommended or Critical Version:
         HPD3

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD3 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.  The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB2000FBZPN MB1000FBZPL CP024963.scexe CP024963.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1313515460/v102406/CP024963.scexe file://./hp/swpackages/CP024963.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000FBUCL and MB3000FBUCN drives MB2000FBUCL and MB3000FBUCN drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024966.scexe Storage Firmware - SAS Storage Disk English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - MB2000FBUCL and MB3000FBUCN drives

    Release Version and/or Date:
          HPDA

    Last Recommended or Critical Version:
          HPDA

    Previous Version of Firmware:
          HPD7

    Firmware Dependency:  
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDA (C): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBUCN MB2000FBUCL CP024966.scexe CP024966.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1257190862/v102409/CP024966.scexe file://./hp/swpackages/CP024966.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000GBUPB and MB3000GBUCK drives MB2000GBUPB and MB3000GBUCK Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025069.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - MB2000GBUPB and MB3000GBUCK Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBUCK MB2000GBUPB CP025069.scexe CP025069.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p785147600/v102759/CP025069.scexe file://./hp/swpackages/CP025069.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000FCQPF and MB3000FBNWV Drives MB2000FCQPF and MB3000FBNWV Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024300.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Online ROM Flash Component for VMware ESXi - MB2000FCQPF and MB3000FBNWV Drives

    Release Version and/or Date:
         HPD7

    Last Recommended or Critical Version:
         HPD7

    Previous Version of Firmware:
         HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware provides performance improvements for large transfer sequential write burst workloads.
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD7 (C): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware prevents a condition in which data failed to be written to media after the host issued a hard reset in a lab stress test environment with write cache enabled.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MB3000FBNWV MB2000FCQPF CP024300.scexe CP024300.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p65069506/v100634/CP024300.scexe file://./hp/swpackages/CP024300.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000GCQXQ and MB3000GBKAC Drives MB2000GCQXQ and MB3000GBKAC Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025075.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB2000GCQXQ and MB3000GBKAC Drives

    Release Version and/or Date:
       HPGJ

    Last Recommended or Critical Version:
        HPGJ

    Previous Version of Firmware:
        HPGF

    Firmware Dependency:    
       None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGJ prevents this condition from occurring. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000GBKAC MB2000GCQXQ CP025075.scexe CP025075.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p899712996/v102765/CP025075.scexe file://./hp/swpackages/CP025075.scexe     changed Online ROM Flash Component for VMware ESXi - MM0500FBFVQ and MM1000FBFVR Drives MM0500FBFVQ and MM1000FBFVR Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024968.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MM0500FBFVQ and MM1000FBFVR drives

    Release Version and/or Date:
          HPD8

    Last Recommended or Critical Version:
          HPD8

    Previous Version of Firmware:
          HPD6

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD8 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD8 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS MM1000FBFVR MM0500FBFVQ CP024968.scexe CP024968.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1578032745/v102411/CP024968.scexe file://./hp/swpackages/CP024968.scexe     changed Online ROM Flash Component for VMware ESXi - MM0500GBKAK and MM1000GBKAL Drives MM0500GBKAK and MM1000GBKAL Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025079.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MM0500GBKAK and MM1000GBKAL Drives

    Release Version and/or Date:
              HPGC

    Last Recommended or Critical Version:
              HPGC

    Previous Version of Firmware:
          HPGB

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGC prevents this condition from occurring.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MM1000GBKAL MM0500GBKAK CP025079.scexe CP025079.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p304563438/v102769/CP025079.scexe file://./hp/swpackages/CP025079.scexe     changed Online ROM Flash Component for VMware ESXi - MM0500FAMYT Drives MM0500FAMYT Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024967.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MM0500FAMYT drive

    Release Version and/or Date:
          HPD6

    Last Recommended or Critical Version:
          HPD6

    Previous Version of Firmware:
          HPD5

    Firmware Dependency:    
         None 

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (D): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problem Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD6 prevents this condition from occurring.
    • This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive. The WRITE SAME command may be used during RAID ARRAY parity initialization.

    Known Issues:
         None

    ]]>         firmware:sd:SAS MM0500FAMYT CP024967.scexe CP024967.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p92875277/v102410/CP024967.scexe file://./hp/swpackages/CP024967.scexe     changed Online ROM Flash Component for VMware ESXi - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024947.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - DG0146FARVU, DG0300FARVV, DG0146BAMYQ, DG0300BAMYR, EG0146FAWJC, and EG0300FAWJD Drives

    Release Version and/or Date:
         HPDG

    Last Recommended or Critical Version:
         HPDG

    Previous Version of Firmware:
         HPDF

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPDG (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware corrects a possible condition in which stale data might be written to the disk. This results in unexpected data being returned in subsequent requests. This data issue has been duplicated in laboratory firmware stress tests.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS DG0146FARVU DG0300FARVV DG0300BAMYR DG0146BAMYQ EG0146FAWJC EG0300FAWJD CP024947.scexe CP024947.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p313700576/v102390/CP024947.scexe file://./hp/swpackages/CP024947.scexe     changed Online ROM Flash Component for VMware ESXi - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024954.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives

    Release Version and/or Date:
          HPDC

    Last Recommended or Critical Version:
          HPDC

    Previous Version of Firmware:
          HPD9

    Firmware Dependency:  
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPDC (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems fixed:

    • Addressed an issue with an HP Smart Array E200 controller which could fail to discover a drive when more than one identify frame was provided during discovery.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FBVFQ EG0300FBVFL EG0600FBVFP EG0450FBVFM CP024954.scexe CP024954.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1400769882/v102397/CP024954.scexe file://./hp/swpackages/CP024954.scexe     changed Online ROM Flash Component for ESXi - MB3000EBKAB Drives MB3000EBKAB Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025073.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for ESXi - MB3000EBKAB Drives

    Release Version and/or Date:
              HPG6

    Last Recommended or Critical Version:
              HPG6

    Previous Version of Firmware:
          HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPG6 prevents this condition from occurring.
    • This firmware corrects “command timeouts” and seek errors which can result in poor performance or a Device Fault condition, the latter of which will result in the drive failed by the Controller or sub system.
     Known Issues:
         None]]>         firmware:SATA MB3000EBKAB CP025073.scexe CP025073.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p822854001/v102763/CP025073.scexe file://./hp/swpackages/CP025073.scexe     changed Supplemental Update / Online ROM Flash Component for ESXi - VB0160EAVEQ and VB0160CBCDE Drives VB0160EAVEQ and VB0160CBCDE Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025081.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for ESXi- VB0160EAVEQ and VB0160CBCDE Drives

    Release Version and/or Date:
              HPG9

    Last Recommended or Critical Version:
              HPG9

    Previous Version of Firmware:
          HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot.  This behavior appears as if the drive is no longer attached to the system following the system soft reboot.  It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA VB0160EAVEQ VB0160CBCDE CP025081.scexe CP025081.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p866334587/v102771/CP025081.scexe file://./hp/swpackages/CP025081.scexe     changed Supplemental Update / Online ROM Flash Component for ESXi - VB0250EAVER Drives VB0250EAVER Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025083.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Supplemental Update / Online ROM Flash Component for ESXi- VB0250EAVER Drives

    Release Version and/or Date:
              HPG9

    Last Recommended or Critical Version:
              HPG9

    Previous Version of Firmware:
          HPG7

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • This firmware corrects the possibility of the drive becoming unresponsive and requiring a power cycle following a soft system reboot.  This behavior appears as if the drive is no longer attached to the system following the system soft reboot.  It is most often observed during Operating System Installation but can occur following any system soft reboot.

    Known Issues:
         None

    ]]>         firmware:SATA VB0250EAVER CP025083.scexe CP025083.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p137674638/v102773/CP025083.scexe file://./hp/swpackages/CP025083.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000EBUCF and MB3000EBUCH Drives MB2000EBUCF and MB3000EBUCH Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025065.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - MB2000EBUCF and MB3000EBUCH Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG4

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • The system did not recognize some drives after a power-cycle. This is due to the drive initialization process being interrupted by a reset, causing the drive to take more time than allotted to report commands.

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA MB3000EBUCH MB2000EBUCF CP025065.scexe CP025065.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p1980972412/v102755/CP025065.scexe file://./hp/swpackages/CP025065.scexe     changed Online ROM Flash Component for VMware ESXi - EG1200FCVBQ Drives EG1200FCVBQ Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024299.scexe Storage Firmware - SAS Storage Disk English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - EG1200FCVBQ Drives

    Release Version and/or Date:
         HPD6

    Last Recommended or Critical Version:
         HPD6

    Previous Version of Firmware:
         HPD4

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD6 (C): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware improves background scans for media robustness, and also corrects a laboratory induced rare condition that could result in the disk not being updated with the latest cache data.

    Known Issues:
         None

    ]]>         firmware:sd:SAS EG1200FCVBQ CP024299.scexe CP024299.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1015554977/v100633/CP024299.scexe file://./hp/swpackages/CP024299.scexe     changed Online ROM Flash Component for VMware ESXi - EH0146FCBVB and EH0300FCBVC drives EH0146FCBVB and EH0300FCBVC drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024960.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
       Online ROM Flash Component for VMware ESXi - EH0146FCBVB and EH0300FCBVC drives

    Release Version and/or Date:
         HPD4

    Last Recommended or Critical Version:
         HPD4

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware revision reduces the possibility of Uncorrectable Read Errors due to poor writes to the media.
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.

    Enhancements/New Features for HPD4 (D): 

    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:
         None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EH0300FCBVC EH0146FCBVB CP024960.scexe CP024960.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p124248750/v102403/CP024960.scexe file://./hp/swpackages/CP024960.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000EAZNL Drives MB2000EAZNL drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025063.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB2000EAZNL drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
         HPG3

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • This firmware contains general maintenance release and code improvement items. Drives built with or upgraded to hard drive firmware version HPG4 should not be downgraded to an earlier version of firmware due to hard drive manufacturing process changes.

    Known Issues:
         None

    ]]>         firmware:SATA MB2000EAZNL CP025063.scexe CP025063.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p299195793/v102753/CP025063.scexe file://./hp/swpackages/CP025063.scexe     changed Online ROM Flash Component for VMware ESXi - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024301.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - MO0200FCTRN, MO0400FCTRP, and MO0800FCTRQ drives

    Release Version and/or Date:
              HPD3

    Last Recommended or Critical Version:
              HPD3

    Previous Version of Firmware:
              HPD2

    Firmware Dependency:
             None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD3 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This maintenance firmware fixes a rare occurrence where the drive would stop communicating with the HOST while recovering from an internal reset.  Due to the device being non-responsive the device was marked as failed by the controller. 

    Known Issues:
             None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MO0200FCTRN MO0400FCTRP MO0800FCTRQ CP024301.scexe CP024301.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p438589030/v100635/CP024301.scexe file://./hp/swpackages/CP024301.scexe     changed Online ROM Flash Component for VMware ESXi - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024955.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Online ROM Flash Component for VMware ESXi - EG0300FCVBF, EG0450FCVBH, EG0600FCVBK, and EG0900FCVBL Drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD3

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD5 (C): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS EG0900FCVBL EG0600FCVBK EG0450FCVBH EG0300FCVBF CP024955.scexe CP024955.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p280429196/v102398/CP024955.scexe file://./hp/swpackages/CP024955.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives MB1000ECWCQ, MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025059.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for ESXi - MB1000ECWCQ,  MB2000ECWCR, MB3000ECWCT, and MB4000ECWCU Drives

    Release Version and/or Date:
              HPG3

    Last Recommended or Critical Version:
              HPG3

    Previous Version of Firmware:
          HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000ECWCU MB3000ECWCT MB2000ECWCR MB1000ECWCQ CP025059.scexe CP025059.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1127471837/v102749/CP025059.scexe file://./hp/swpackages/CP025059.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024964.scexe Storage Firmware - SAS Storage Disk English (US), French, Italian, German, Spanish, Japanese To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - MB1000FCWDE, MB2000FCWDF, MB3000FCWDH, and MB4000FCWDK drives

    Release Version and/or Date:
         HPD5

    Last Recommended or Critical Version:
         HPD5

    Previous Version of Firmware:
         HPD2

    Firmware Dependency:
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD5 (C): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.

    Problems Fixed:

    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset to mitigate potential speed negotiation issues.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCWDK MB3000FCWDH MB2000FCWDF MB1000FCWDE CP024964.scexe CP024964.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p741371021/v102407/CP024964.scexe file://./hp/swpackages/CP024964.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024965.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB1000FCWPP, MB2000FCVBV, MB3000FCVCA, and MB4000FCVCB Drives

    Release Version and/or Date:
          HPD2

    Last Recommended or Critical Version:
          HPD2

    Previous Version of Firmware:
          HPD1

    Firmware Dependency:  
         None

    Enhancements/New Features:

    • This firmware improves reliability by modifying the pivot bearing grease wear leveling algorithm, which if not implemented, could result in an increased drive failure rate for specific usage applications (eg, very long periods of small range seeks). 
    • Enhancements also include performance improvements.
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features:Enhancements/New Features for HPD2 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems fixed:

         None

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS firmware:sd:SAS MB4000FCVCB MB3000FCVCA MB2000FCVBV MB1000FCWPP CP024965.scexe CP024965.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1625874879/v102408/CP024965.scexe file://./hp/swpackages/CP024965.scexe     changed Online ROM Flash Component for VMware ESXi - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025061.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB1000GCWCV, MB2000GCWDA, MB3000GCWDB, and MB4000GCWDC Drives

    Release Version and/or Date:
         HPGD

    Last Recommended or Critical Version:
         HPGD

    Previous Version of Firmware:
         HPGC

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Frequency of Background Media Scans changed to reduce drive workload.
    • Improvement to allow drives to better handle sudden shock occurrences.
    • New features to enhance telemetry of drive related issues and workload statistics during failure analysis.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • A correction to address failure to activate LED Activity which occurs during system boot. 

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MB4000GCWDC MB3000GCWDB MB2000GCWDA MB1000GCWCV CP025061.scexe CP025061.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1632381182/v102751/CP025061.scexe file://./hp/swpackages/CP025061.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025067.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB2000ECVJF, MB3000ECVJH, and MB4000ECVJK Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB2000ECVJF MB3000ECVJH MB4000ECVJK CP025067.scexe CP025067.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p631943653/v102757/CP025067.scexe file://./hp/swpackages/CP025067.scexe     changed Online ROM Flash Component for VMware ESXi - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025071.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MB2000GCVBR, MB3000GCVBT, and MB4000GCVBU Drives

    Release Version and/or Date:
         HPG3

    Last Recommended or Critical Version:
         HPG3

    Previous Version of Firmware:
        HPG2

    Firmware Dependency:
         None

    Enhancements/New Features:

    • This firmware includes a performance improvement when drives are operating in an expander environment.
    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problem Fixed:
             None

    Known Issues:
         None

    ]]>         firmware:SATA firmware:SATA firmware:SATA MB4000GCVBU MB3000GCVBT MB2000GCVBR CP025071.scexe CP025071.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p175980731/v102761/CP025071.scexe file://./hp/swpackages/CP025071.scexe     changed Online ROM Flash Component for VMware ESXi - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025077.scexe Storage Firmware - SATA Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - MK0100GCTYU, MK0200GCTYV, MK0400GCTZA, and MK0800GCTZB Drives

    Release Version and/or Date:
         HPG4

    Last Recommended or Critical Version:
         NA

    Previous Version of Firmware:
              NA
     
    Firmware Dependency:
         None

    Enhancements/New Features:

    • Added support for HP Dynamic Smart Array B140i Controller. 

    Problems Fixed:

    • This maintenance release corrects a failure seen during a HP Insight Diagnostic hard drive test. The failure was due to Device Extended Self-Test not completing in the drives advertised Self-Test completion time. This failure is not an indication that the drive is bad or marginal.
     Known Issues:
         None
    ]]>         firmware:SATA firmware:SATA firmware:SATA firmware:SATA MK0100GCTYU MK0200GCTYV MK0400GCTZA MK0800GCTZB CP025077.scexe CP025077.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1436345280/v102767/CP025077.scexe file://./hp/swpackages/CP025077.scexe     changed Online ROM Flash Component for VMware ESXi - EG0900FDJYR and EG1200FDJYT Drives EG0900FDJYR and EG1200FDJYT Drives Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024956.scexe Storage Firmware - SAS Storage Disk English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
          Online ROM Flash Component for VMware ESXi - EG0900FDJYR and EG1200FDJYT Drives

    Release Version and/or Date:
          HPD1

    Last Recommended or Critical Version:
          HPD1

    Previous Version of Firmware:
          HPD0

    Firmware Dependency:    
         None

    Enhancements/New Features:
    • Added support for VMware vSphere 5.5.
    • Added support for UEFI (Universal Extensible Firmware Interface) based servers.
    Enhancements/New Features for HPD1 (B): 
    • Updated the flash engine to standardize logging across all SAS drive components.
    • Enhanced logging capability to improve the details provided in the component log file.
    Problems Fixed:
    • This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.

    Known Issues:
         None

    ]]>         firmware:sd:SAS firmware:sd:SAS EG1200FDJYT EG0900FDJYR CP024956.scexe CP024956.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-drive/p314539567/v102399/CP024956.scexe file://./hp/swpackages/CP024956.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL585 G7 (A16) Servers HP ProLiant DL585 G7 (A16) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025588.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect


     

    ]]>         firmware:system CP025588.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p2117630434/v104580/CP025588.scexe file://./hp/swpackages/CP025588.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL385 G7 (A18) Servers HP ProLiant DL385 G7 (A18) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025589.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025589.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p681278392/v104582/CP025589.scexe file://./hp/swpackages/CP025589.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL465c G7 (A19) Servers HP ProLiant BL465c G7 (A19) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 CP024184.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

     To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf

     
    To update firmware from VMware ESXi operating system on target server:
     

    • Enable Tech Support Mode on the ESXi host. 
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:system CP024184.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1253554273/v100362/CP024184.scexe file://./hp/swpackages/CP024184.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL685c G7 (A20) Servers HP ProLiant BL685c G7 (A20) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025595.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025595.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1546502107/v104598/CP025595.scexe file://./hp/swpackages/CP025595.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025532.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025532.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p715294575/v104439/CP025532.scexe file://./hp/swpackages/CP025532.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025596.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025596.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p514354467/v104599/CP025596.scexe file://./hp/swpackages/CP025596.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL4545 G7 (A31) Servers HP ProLiant SL4545 G7 (A31) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 CP024186.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

     To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf

     
    To update firmware from VMware ESXi operating system on target server:
     

    • Enable Tech Support Mode on the ESXi host. 
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:system CP024186.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1323868895/v100364/CP024186.scexe file://./hp/swpackages/CP024186.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL680c G7/BL620c G7 (I25) Servers HP ProLiant BL680c G7/BL620c G7 (I25) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025575.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025575.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p987013199/v104527/CP025575.scexe file://./hp/swpackages/CP025575.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL460c G7 (I27) Servers HP ProLiant BL460c G7 (I27) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025576.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025576.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p452288324/v104528/CP025576.scexe file://./hp/swpackages/CP025576.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL490c G7 (I28) Servers HP ProLiant BL490c G7 (I28) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 CP024234.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

     To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf

     
    To update firmware from VMware ESXi operating system on target server:
     

    • Enable Tech Support Mode on the ESXi host. 
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:system CP024234.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p231963756/v100444/CP024234.scexe file://./hp/swpackages/CP024234.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025457.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025457.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1750155435/v104177/CP025457.scexe file://./hp/swpackages/CP025457.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025364.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025364.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1413770987/v103875/CP025364.scexe file://./hp/swpackages/CP025364.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 (I32) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025426.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025426.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1476965832/v104038/CP025426.scexe file://./hp/swpackages/CP025426.scexe     changed Online ROM Flash Component for VMware - HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers HP ProLiant BL460c Gen9/WS460c Gen9 (I36) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026251.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.

    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026251.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p177557932/v106751/CP026251.scexe file://./hp/swpackages/CP026251.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025555.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025555.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p332943231/v104493/CP025555.scexe file://./hp/swpackages/CP025555.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025556.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025556.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1066547834/v104497/CP025556.scexe file://./hp/swpackages/CP025556.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 CP024202.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

     To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf

     
    To update firmware from VMware ESXi operating system on target server:
     

    • Enable Tech Support Mode on the ESXi host. 
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:system CP024202.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1260588942/v100394/CP024202.scexe file://./hp/swpackages/CP024202.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025557.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025557.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p786202575/v104500/CP025557.scexe file://./hp/swpackages/CP025557.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025558.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025558.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1175592976/v104501/CP025558.scexe file://./hp/swpackages/CP025558.scexe     new Online ROM Flash Component for VMware ESXi - HP ProLiant ML10 v2 (J10) Servers HP ProLiant ML10 v2 (J10) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 CP025697.scexe ServerOptions Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025697.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1408487295/v104991/CP025697.scexe file://./hp/swpackages/CP025697.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL580 G7 (P65) Servers HP ProLiant DL580 G7 (P65) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025561.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025561.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1691734091/v104505/CP025561.scexe file://./hp/swpackages/CP025561.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL980 G7 (P66) Servers HP ProLiant DL980 G7 (P66) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025562.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025562.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p652061553/v104508/CP025562.scexe file://./hp/swpackages/CP025562.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL380 G7 (P67) Servers HP ProLiant DL380 G7 (P67) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025563.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025563.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1339322429/v104510/CP025563.scexe file://./hp/swpackages/CP025563.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL360 G7 (P68) Servers HP ProLiant DL360 G7 (P68) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025564.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025564.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p2070525927/v104511/CP025564.scexe file://./hp/swpackages/CP025564.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025565.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025565.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1515224671/v104515/CP025565.scexe file://./hp/swpackages/CP025565.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025384.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025384.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1290251759/v103934/CP025384.scexe file://./hp/swpackages/CP025384.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025566.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025566.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1906316356/v104516/CP025566.scexe file://./hp/swpackages/CP025566.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025567.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025567.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1419286291/v104518/CP025567.scexe file://./hp/swpackages/CP025567.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025307.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
      ]]>         firmware:system CP025307.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1960656083/v103709/CP025307.scexe file://./hp/swpackages/CP025307.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025336.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025336.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p867483727/v103788/CP025336.scexe file://./hp/swpackages/CP025336.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025568.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect

    ]]>         firmware:system CP025568.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p417576037/v104520/CP025568.scexe file://./hp/swpackages/CP025568.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025569.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025569.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1362919562/v104521/CP025569.scexe file://./hp/swpackages/CP025569.scexe     changed Online ROM Flash Component for VMware ESXi- HP ProLiant DL580 Gen8 (P79) Servers HP ProLiant DL580 Gen8 (P79) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024867.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect

    ]]>         firmware:system CP024867.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p1276481443/v102126/CP024867.scexe file://./hp/swpackages/CP024867.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025573.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025573.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p708480237/v104525/CP025573.scexe file://./hp/swpackages/CP025573.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Server Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 5.5 VMware vSphere 6.0 CP025678.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.0/5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025678.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p501865762/v104900/CP025678.scexe file://./hp/swpackages/CP025678.scexe     new Online ROM Flash Component for VMware - HP ProLiant (DL120 Gen9) (P86) Servers HP ProLiant (DL120 Gen9) (P86) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026394.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026394.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p1097845721/v107172/CP026394.scexe file://./hp/swpackages/CP026394.scexe     changed Online ROM Flash Component for VMware - HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers HP ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026262.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  

    The minimum CRU version for 5.5 is 5.5.4.1. 
    The minimum CRU version for 5.1 is 5.0.3.9

    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

     

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026262.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p755839110/v106780/CP026262.scexe file://./hp/swpackages/CP026262.scexe     changed Online ROM Flash Component for VMware - HP ProLiant ML350 Gen9 (P92) Servers HP ProLiant ML350 Gen9 (P92) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026325.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.

    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at: www.hp.com/go/spp

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026325.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p869754141/v107011/CP026325.scexe file://./hp/swpackages/CP026325.scexe     changed Online ROM Flash Component for VMware ESXi - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025891.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP025891.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p213625765/v105691/CP025891.scexe file://./hp/swpackages/CP025891.scexe     new Online ROM Flash Component for VMware - HP ProLiant ML150 Gen9 (P95) Servers HP ProLiant ML150 Gen9 (P95) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026294.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026294.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p1666893373/v106903/CP026294.scexe file://./hp/swpackages/CP026294.scexe     new Online ROM Flash Component for VMware - HP ProLiant ML110 Gen9 (P99) Servers HP ProLiant ML110 Gen9 (P99) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026299.scexe ServerOptions Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026299.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p87818856/v106929/CP026299.scexe file://./hp/swpackages/CP026299.scexe     new Online ROM Flash Component for VMware ESXi- HP ProLiant XL230b Gen9 (U12) Servers HP ProLiant XL230b Gen9 (U12) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026402.scexe ServerOptions Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026402.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p801383683/v107189/CP026402.scexe file://./hp/swpackages/CP026402.scexe     changed Online ROM Flash Component for VMware ESXi- HP ProLiant XL230a/XL250a Gen9 (U13) Servers HP ProLiant XL230a/XL250a Gen9 (U13) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026303.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026303.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p207364704/v106936/CP026303.scexe file://./hp/swpackages/CP026303.scexe     new Online ROM Flash Component for VMware - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Online ROM Flash Component for VMware - HP ProLiant XL170r/XL190r Gen9 (U14) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026117.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.  
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         ]]> firmware:system CP026117.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p1065251975/v106373/CP026117.scexe file://./hp/swpackages/CP026117.scexe     new Online ROM Flash Component for VMware - HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers HP ProLiant DL60 Gen9/DL80 Gen9 (U15) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026444.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run. 


    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components


    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
     

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       

    To use HP Insight Control for vCenter:

    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component

    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         ]]> firmware:system CP026444.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p1434541498/v107293/CP026444.scexe file://./hp/swpackages/CP026444.scexe     changed Online ROM Flash Component for VMware - HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers HP ProLiant DL160 Gen9/DL180 Gen9 (U20) Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026322.scexe Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.

    Offline:

    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HP SUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update
    • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
       
    To use HP Insight Control for vCenter:
    • Log in to the vSphere Client
    • Select a server or cluster in the inventory tree
    • Click the HP Insight Management tab
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host
    • Login as root. (You must be root in order to apply the update)
    • Place the Smart Component in a temporary directory
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:system CP026322.scexe http://ftp.hp.com/pub/softlib2/software1/sc-vmware-uefi-sys/p2052555639/v107005/CP026322.scexe file://./hp/swpackages/CP026322.scexe     changed Firmware CD Supplemental Update / Online ROM Flash Component for VMware ESXi - HP Integrated Lights-Out 3 HP Integrated Lights-Out 3 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025439.scexe Lights Out Server Firmware - Lights-Out Management English (US)
    Linux:      ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1255562964/v64722
    Windows: ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p901462262/v64721
    Win64:     ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v64720]]>         To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system if you would like the update to take effect immediately.
    ]]>         firmware:ilo3 103c 3307 103c 3309 103c 3307 103c 330e sh CP019816.scexe CP025439.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p986822869/v104116/CP025439.scexe file://./hp/swpackages/CP025439.scexe     changed Firmware CD Supplemental Update / Online ROM Flash Component for VMware ESXi - HP Integrated Lights-Out 4 HP Integrated Lights-Out 4 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP024540.scexe Lights Out Server Firmware - Lights-Out Management English (US)   of the iLO utilities:
     
      • HPQLOCFG 1.3.0 (replaced CPQLOCFG)
      • HP Lights-Out XML Scripting Sample 4.50 bundle
      • HPONCFG 4.5.0.0 (Windows)
      • HPONCFG 4.4.0.0 (Linux)
      • LOCFG.PL 4.50 (included in the HP Lights-Out XML Scripting Sample bundle)
      • HPLOMIG 4.50 (upgrade HPLOMIG before installing this version of iLO 4)
    ]]>         New recommended text for installation notes
    Offline:               
    SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 
    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    Download the appropriate SPP 
    Add the component to the SPP
    Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    Run HP SUM     
    Add the ESXi host to be updated as a remote target/node
    Enter IP or DNS address of the ESXi host to be updated
    Enter the ESXi host credentials (root or administrator username and password)
    For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    Follow HP Smart Update Manager Steps to complete the firmware update
    Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
    To use HP Insight Control for vCenter:  
    Log in to the vSphere Client       
    Select a server or cluster in the inventory tree
    Click the HP Insight Management tab    
    Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    Enable Tech Support Mode on the ESXi host      
    Login as root. (You must be root in order to apply the update)
    Place the Smart Component in a temporary directory
    From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    Follow the directions given by the Smart Component
    Logout 
    Disable Tech Support Mode on the ESXi host
    Reboot your system, if required, for the firmware update to take effect
     
    ]]>          

    iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

    http://www.hp.com/go/ilo

    Select your lights-out product, then support & documents, then manuals.

    • Check the online help for additional information about how to use features. 
      Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
    ]]>         firmware:ilo4 103C 3307 103C 3381 103C 3306 103C 3381 103C 3308 103C 3381 103C 3300 103C 3381 103C 3301 103C 3381 103C 3302 103C 3381 sh CP024540.scexe CP024540.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1457726527/v101197/CP024540.scexe file://./hp/swpackages/CP024540.scexe     changed HP QLogic P3P Online Firmware Upgrade Utility for VMware HP QLogic P3P Online Firmware Upgrade Utility for VMware VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026024.scexe Networking Server Firmware - Network English (US) Download CP026024.txt to view installation instructions.

    ]]>         firmware:nic 1077 8020 103C 3346 1077 8020 103C 3733 1077 8020 103C 1957 1077 8021 103c 3348 1077 8022 103C 3347 1077 8021 103C 1957 1077 8022 103C 1957 CP026024.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1440033824/v106095/CP026024.scexe file://./hp/swpackages/CP026024.scexe     changed HP Broadcom Online Firmware Upgrade Utility for VMware HP Broadcom Online Firmware Upgrade Utility for VMware VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP023981.scexe Networking Server Firmware - Network English (US)
    NIC Boot Code Version PXE Version CLP Version iSCSI Version IPMI Version NCSI Version FCoE Version UEFI Version CCM Version L2 Version
    HP NC107i PCIe Gigabit Server Adapter 3.35 n/a n/a n/a 8.07 n/a n/a n/a n/a n/a
    HP NC325m PCIe Quad Port Gigabit Server Adapter 3.28 n/a 1.3.6 n/a n/a n/a n/a n/a n/a n/a
    HP Ethernet 1Gb 2-port 330i Adapter (18D2) 1.61 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 330i Adapter (22BD) 2.05 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331FLR Adapter
    HP Ethernet 1Gb 4-port 331T Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP Ethernet 1Gb 4-port 331i Adapter
    HP Ethernet 1Gb 4-port 331i-SPI Adapter    		 1.38 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332i Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a n/a 7.10.71 n/a
    HP Ethernet 1Gb 2-port 332T Adapter 1.34 16.8.2 n/a n/a n/a 1.3.5 n/a 16.8.11 7.10.71 n/a
    HP NC373F PCIe Multifunction Gigabit Server Adapter
    HP NC373T PCIe Multifunction Gigabit Server Adapter    		 1.9.6 2.8.5 n/a n/a n/a n/a n/a n/a n/a n/a
    HP NC382i DP Multifunction Gigabit Server Adapter 5.2.3 n/a n/a 7.4.2 n/a 2.0.12 n/a n/a n/a n/a
    HP NC382m DP 1GbE Multifunction BL-c Adapter 5.2.3 4.6.10 n/a 3.1.7 n/a n/a n/a n/a n/a n/a
    HP NC382T PCIe DP Multifunction Gigabit Server Adapter 5.2.3 5.2.4 n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP Flex-10 10Gb 2-port 530FLB Adapter
    HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
    HP Flex-10 10Gb 2-port 530M Adapter
    HP Ethernet 10Gb 2-port 530SFP+ Adapter
    HP Ethernet 10Gb 2-port 530T Adapter    		 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) 6.2.28 n/a n/a 3.1.5 n/a n/a n/a n/a n/a n/a
    HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) 6.2.28 n/a n/a 4.2.10 n/a n/a n/a n/a n/a n/a
    HP NC532m Dual Port 10GbE Multifunction BL-c Adapter 6.2.28 7.0.53 n/a 7.4.2 n/a n/a n/a n/a n/a n/a
    HP Ethernet 10Gb 2-port 533FLR-T Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP FlexFabric 10Gb 2-port 534FLB Adapter
    HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
    HP FlexFabric 10Gb 2-port 534M Adapter
    HP StoreFabric CN1100R Dual Port Converged Network Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31
    HP FlexFabric 10Gb 2-port 536FLB Adapter 7.10.72 7.10.71 n/a n/a n/a n/a n/a 7.11.7 7.10.71 7.10.31
    HP FlexFabric 20Gb 2-port 630FLB Adapter
    HP FlexFabric 20Gb 2-port 630M Adapter    		 7.10.72 7.10.71 n/a 7.10.33 n/a n/a 7.10.70 7.11.7 7.10.71 7.10.31

    ]]>         firmware:nic 14E4 1655 103C 18D2 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 1639 103C 7059 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 1650 103C 3654 14E4 163A 103C 171D 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 168E 103C 18D3 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 1665 103C 22BD 14E4 16AE 103C 1931 14E4 16AE 103C 193A 14E4 16AE 103C 18D3 14E4 16AE 103C 339D 14E4 16AE 103C 3382 14E4 16AE 103C 1798 14E4 1657 103C 22BE 14E4 16AE 103C 17A5 14E4 16A4 103C 1917 14E4 16A4 103C 1916 14E4 16AE 103C 1930 14E4 16AE 103C 1933 14E4 16AE 103C 1932 14E4 16A2 103C 22FA 14E4 16A4 103C 22FA 14E4 1639 103C 7055 CP023981.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p973404356/v99806/CP023981.scexe file://./hp/swpackages/CP023981.scexe     changed Online ROM Flash Component for VMware ESXi - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025733.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name: 

         Online ROM Flash Component for VMware ESXi - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812

    Release Version and/or Date: 
         6.62

    Last Recommended or Critical Version:
         6.60

    Previous Version of Firmware:
         6.60

    Firmware Dependency:
         None 

    Enhancements/New Features:

    • Performance enhancement when a drive starts to degrade due to excessive recovered media errors.
    Problems Fixed:
    • On systems configured with HP Smart Array P711m controllers connected to logical volumes on HP P2000 G3 SAS storage arrays, the Smart Array device driver ‘hpsa’ would cease to function during installation of VMware vSphere 5.5 Update 2.
    • After the Smart Array device driver 'hpsa' was upgraded to version 3.4.6-165 on Red Hat Enterprise Linux 6 Update 4 or Update 5 on a server configured with logical volumes on HP P2000 G3 Storage Systems or HP MSA 2040 SAS Storage Arrays, the system would cease to function and an HP Smart Array P712m controller lockup would be reported after reboot. (POST Error: 1719 - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13))

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware 103C 323A 103C 3241 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 3243 103C 323A 103C 324A 103C 323A 103C 324B CP025733.scexe CP025733.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p431244090/v105155/CP025733.scexe file://./hp/swpackages/CP025733.scexe     changed Online ROM Flash Component for VMware ESXi - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Smart Array P220i, P222, P420i, P420, P421, P721m, and P822 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026357.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Online ROM Flash Component for VMware ESXi - Smart Array P220i, P222, P420i, P420, P421, P721m, and P822

    Release Version and/or Date:
         6.34

    Last Recommended or Critical Version:
         6.34    

    Previous Version of Firmware:
         6.00

    Firmware Dependency:
         None

    • Enhancements/New Features:

    • Improved error handling when hard disk drives generate a large number of recoverable errors.
    • Added support for non-hotplug disk drives.
    • Added support for HP ProLiant Gen9 servers:
      • HP ProLiant BL460c Gen9 Server
      • HP ProLiant BL660c Gen9 Server

    • Problems Fixed:

    • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    • When a controller was set to RAID6 mode and a large number of recoverable errors were generated by hard disk drives in the system, the controller might go into a degraded mode and cease to function. A 0x0E error message would display during POST on subsequent power cycle and in the Integrated Management Log (IML).
    • The controller would report 0xE0 error to HP Smart Storage Administrator (HP SSA) and would cease to function when set to RAID 6 mode.
    • Intermittent SSD SATA 6G drive failures would occur when drive was configured in Bay 1 of HP ProLiant BL465 Gen8 Server.
    • Uncorrectable ECC errors would cause the controller to stop responding (Lockup 0x13).  This version of Smart Array firmware properly calculates the maximum controller memory bandwidth required to sustain streaming write operations with the current logical drive configuration and reduces the cache memory speed on configurations that do not require peak controller memory bandwidth.  When running at the slower memory speed, less power is consumed and performance degradation is expected to be negligible. For additional information, reference Customer Advisory c03755983.
    • The HP D2220sb Storage Blade is not recognized when configuring it with the HP ProLiant BL460c Gen9 Server Blade. For additional information please refer to the customer advisory # c04602866

    • Known Issues:
           None

    ]]>         firmware firmware firmware firmware firmware firmware firmware firmware 103c 323b 103c 3352 103c 323b 103c 3351 103c 323b 103c 3354 103c 323b 103c 3350 103c 323b 103c 3355 103c 323b 103c 3353 103C 323B 103C 3356 CP026357.scexe CP026357.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1414358915/v107071/CP026357.scexe file://./hp/swpackages/CP026357.scexe     changed Online ROM Flash Component for VMware ESXi - Smart Array P230i, P430, P431, P731m, P830i, and P830 Smart Array P230i, P430, P431, P731m, P830i, and P830 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP026356.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
             Online ROM Flash Component for VMware ESXi - Smart Array P230i, P430, P431, P731m, P830i, and P830

    Release Version and/or Date:
         2.40

    Last Recommended or Critical Version:
         2.40

    Previous Version of Firmware:
         2.32

    Firmware Dependency:
         None

    Enhancements/New Features:
         None

    Problems Fixed in version 2.40:
    This firmware release resolved the following issue:

    •  Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001

    Known Issues:
         None

     

    ]]>         firmware firmware firmware firmware firmware firmware 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1926 103c 323c 103c 1923 103c 323c 103c 1922 103c 323c 103c 1928 CP026356.scexe CP026356.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1187857912/v107069/CP026356.scexe file://./hp/swpackages/CP026356.scexe     changed Online ROM Flash Component for VMware ESXi - Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Smart Array H240ar, H240, H241, H244br, P244br, P246br, P440ar, P440, P441, P741m, P840, and P841 Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 VMware ESXi 5.0 CP026558.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi - Smart Array H240ar, H240, H241, H244br, P244br, P440ar, P440, P441, and P840

     

    Release Version and/or Date:
         2.14

    Last Recommended or Critical Version:
         2.14

    Previous Version of Firmware:
         1.34

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Servers now power up faster due to improvements in the UEFI controller driver.
    • Logical volume transformations are allowed on controllers without data preservation.
    • Drives can now be hot-added in a zoned configuration.

    Problems Fixed:

    • Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions.　 For additional information please refer to the customer advisory # c04602001
    • When rebuilding a logical volume greater than 2TB in size, the controller might cease to function (POST Lockup 0xE0). Controller would report a POST Lockup 0xE0 error and cease to function, when the following conditions were met:

                     1) Encryption enabled and a re-key operation was in progress.
                     2) While IO was in progress, physical drives failed in an Advanced Data Guarding (RAID6 or RAID60) volume, which caused the volume to go into a degraded state.
                     3) Degraded Mode Performance Optimization was enabled via HP Smart Storage Administrator.

    • If a power outage or brownout occurred while running a volume expansion, the controller might cease to function on the following boot (POST Lockup 0x13).
    • HP D2600/D2700 Disk Enclosures might not show the correct box number on the LED display.
    • Controller might become unresponsive if a drive was re-inserted into encrypted LUN while performing IO on it.
    • When running IO with encryption turned on in remote mode and a local key cache enabled, changing the master key might result in encryption being disabled on the next power up.
    • Controller allowed encryption key changes even with locked volumes.
    • A key restore from an Enterprise Secure Key Manager could take a long time for large configurations.
    • Users were unable to install Red Hat Enterprise Linux 6 Update 5 to a logical volume on an HP P2000 MSA Array System if both an HP H241 and H240 Smart Host Bus Adapter were present in the system.
    • When HP D3700 Disk Enclosures were connected to an HP H240 Smart Host Bus Adapter, the maximum number of enclosures displayed in the boot menu was five, although a maximum of eight enclosures were supported.
    • When a volume expansion or encryption re-key operation was performed, and if multiple power losses or brownouts occurred, data might become inaccessible (POST Message 1769).
    • POST messages 1764, 1768, 1784, 1786, 1787, 1789, 1831 have been updated and/or corrected.

    Known Issues:
         None

    ]]>         firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware 103c 3239 103c 21c3 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21BD 103c 3239 103c 21c7 103c 3239 103c 21bf 103c 3239 103c 21c6 103c 3239 103c 21cb 103c 3239 103c 21c8 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca CP026558.scexe CP026558.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p1727101721/v107696/CP026558.scexe file://./hp/swpackages/CP026558.scexe     new HP D3600/D3700 12Gb SAS Disk Enclosure ROM Flash Component for VMware (esxi) D3600, D3700 ROM Flash Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 5.1 VMware ESXi 5.0 VMware vSphere 6.0 CP025877.scexe Storage Server Firmware - Storage Controller English (US)
    IMPORTANT: Firmware updates must be performed during a system maintenance window, with all I/O to the system halted.

    WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.

    NOTE: All firmware flash progress messages are logged to /var/cpq/D3000.log and flashing summary is logged to /var/cpq/Component.log.]]>         Firmware installation instructions for Smart Array configurations:-

    Firmware is embedded in the downloaded file, which is a self-extracting, executable module. This module operates only from the Linux command line.
    • Place the downloaded file in a temporary directory.
    • Open a Linux command console.
    • From the same directory, enable execute access to this module by entering chmod +x cpxxxxxx.scexe. (cpxxxxxx.scexe represents the downloaded file.)
    • Execute the Smart Component by entering ./cpxxxxxx.scexe. (cpxxxxxx.scexe represents the downloaded file.)
    • Follow the on-screen instructions provided by the installer.
    To use HP Smart Update Manager from the HP Service Pack for ProLiant:  

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    NOTE: This module is a SCEXE file. When you download this module from the HP.com web site, you cannot double click on the link. You will need to right click the link and select "Save as."]]>         firmware:QLOGIC firmware:QLOGIC 103c 323b 103c 3353 103c 323b 103c 3352 103c 323c 103c 1923 1000 0087 1590 0043 1000 0087 1590 0042 103c 3239 103c 21c3 D3600 D3700 CP025877.scexe CP025877.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1917641491/v105641/CP025877.scexe file://./hp/swpackages/CP025877.scexe     Online ROM Flash Component for VMware ESXi – HP D6000 Disk Enclosure D6000 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 CP023793.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for Proliant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired firmware to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system if you would like the update to take effect immediately.
    ]]>         Deliverable Name:
             Online ROM Flash Component for VMware ESXi – HP D6000 Disk Enclosure

    Release Version and/or Date:
         2.70

    Last Recommended or Critical Version:
         2.70

    Previous Version of Firmware:
         2.54

    Firmware Dependency:
         None

    Enhancements/New Features:
             None

    Problems Fixed:

    • In rare cases, the Smart Array controller would become inaccessible after multiple IO module resets were performed.  If a controller lockup occurred because of this issue, the error code 0xAB would display in the following locations after a subsequent server reboot:
      • Server POST
      • System event log
      • ADU reports / HPSSA diagnostic reports

    Known Issues:
         None

    ]]>         firmware:QLOGIC D6000 CP023793.scexe CP023793.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p22806810/v99056/CP023793.scexe file://./hp/swpackages/CP023793.scexe     changed Online ROM Flash Component for VMware ESXi – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP Proliant Gen8 expander Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025484.scexe Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi – HP Gen8 Server Backplane Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         3.30

    Last Recommended or Critical Version:
         3.30

    Previous Version of Firmware:
         3.14

    Firmware Dependency:
         None

    Enhancements/New Features for 3.30 (C):

    • Added support for VMware vSphere 6.0

    Problems Fixed in version 3.30:

    • Fixed an issue with the SAS connector element which reported invalid connector type/physical link for disabled PHYs.
    • Fixed the Logical Link Rate because the Rate was not set properly when PHY is disabled.
    Problems Fixed in version 3.30 (B):
    • Fixed an issue where installing a VMware Smart Component for an HP Expander through an HP H22x Host Bus Adapters using any version of HP Smart Update Manager (HP SUM) will fail. Return code (4202967293) was displayed in the HP SUM log, hpsum_detail_log.txt.

    Known Issues:
         None

     ]]>         firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC firmware:QLOGIC CP025484.scexe CP025484.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p806967243/v104226/CP025484.scexe file://./hp/swpackages/CP025484.scexe     new Online ROM Flash Component for VMware ESXi – HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers HP Proliant Gen9 expander Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025350.scexe ServerOptions Storage Server Firmware - Storage Controller English (US), Japanese, German, French, Italian, Spanish To use HP Smart Update Manager from the HP Service Pack for ProLiant:

         Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
    • Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
    • Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
    • Boot from the newly created HP Service Pack for ProLiant USB key.
    • Follow HP Smart Update Manager steps to complete firmware update.
         Remote Online:
    • Download the appropriate SPP.
    • Add the component to the SPP.
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
    • Run HP SUM.
    • Add the ESXi host to be updated as a remote target/node.
    • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
     
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host.
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         Deliverable Name:
         Online ROM Flash Component for VMware ESXi – HP 12Gb/s SAS Expander Firmware for HP Smart Array Controllers and HP HBA Controllers

    Release Version and/or Date:
         1.31

    Last Recommended or Critical Version:
         1.31

    Previous Version of Firmware:
         1.01  

    Firmware Dependency:
         None

    Enhancements/New Features:

    • Firmware now reads the max link rate from the backplane NVRAM and sets the rate accordingly. The expander firmware will adjust the SAS links to the appropriate speed based on the backplane type. The firmware will not try to force slower backplanes to higher link rates.

    Problems Fixed:

    • On rare occasions, incorrect data may be read or written while a controller is rebuilding a drive.
    • Disabled Edge-Buffering to address a rare data integrity issue seen with a drive that had bad blocks.
    • In rare instances, on an HP ProLiant Gen9 series server, the Smart Array controller would detect an HP Hard Disk Drive (HDD) as a non-HP drive. For additional information please refer to the customer advisory # c04597377

    Known Issues:
         None

    ]]>         firmware:QLOGIC CP025350.scexe CP025350.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-array/p915683165/v103823/CP025350.scexe file://./hp/swpackages/CP025350.scexe     changed HP Firmware Flash for QLogic Fibre Channel Host Bus Adapters - VMware 5.0/5.1 HP Firmware Flash for QLogic Fibre Channel HBA's for ESXi Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 CP024195.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components
    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect

     

    ]]>         firmware:QLOGIC 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E 1077 2031 103C 1939 hpsetup CP024195.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1501580830/v100387/CP024195.scexe file://./hp/swpackages/CP024195.scexe     changed HP Firmware Flash for QLogic Fibre Channel Host Bus Adapters for VMware vSphere 5.5 and VMware vSphere 6.0 HP Firmware Flash for QLogic Fibre Channel HBA's for ESXi 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 CP024196.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components
    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect

     

    ]]>         firmware:QLOGIC 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E 1077 2031 103C 1939 hpsetup CP024196.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1057563236/v100388/CP024196.scexe file://./hp/swpackages/CP024196.scexe     changed HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters - VMWare 5.0/5/1 HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters for ESXi Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 CP025120.scexe ServerOptions Networking Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
       

    To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:brocade 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 hpsetup CP025120.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p825730615/v102947/CP025120.scexe file://./hp/swpackages/CP025120.scexe     changed HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters for vSphere 5.5 and 6.0 HP Firmware Flash for QLogic BR-series Fibre Channel Host Bus Adapters for ESXi Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 CP025121.scexe ServerOptions Networking Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components

    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
       

    To use HP Insight Control for vCenter :
     

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:brocade 1657 0017 103c 1743 1657 0013 103c 1742 1657 0017 1657 0014 1657 0013 1657 0014 1657 0021 103c 1779 hpsetup CP025121.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p355595223/v102952/CP025121.scexe file://./hp/swpackages/CP025121.scexe     changed HP Firmware Flash for Emulex Fibre Channel Host Bus and Converged Network Adapters - VMware 5.0/5.1 HP Firmware Flash for Emulex Fibre Channel HBA's and CNA's for ESXi 5.0/5.1 Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 CP025746.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components
    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:emulex 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0704 103c 3314 19a2 0700 103c 3314 19a2 0700 103c 1747 19a2 0702 103c 3314 19a2 0700 103c 1746 10DF F100 103C 1719 10DF FE00 103C 1708 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0710 103C 184E 19A2 0712 103C 337B 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0720 103C 21D4 10DF 0722 103C 21D4 10DF 0724 103C 21D4 10DF 0720 103C 1935 10DF 0724 103C 1935 10DF 0722 103C 1935 10DF 0720 103C 1934 10DF 0724 103C 1934 10DF 0722 103C 1934 10DF 0720 103C 220A 10DF 0724 103C 220A 10DF 0722 103C 220A 10DF F100 103C 2238 10DF 0720 103C 803F hpsetup CP025746.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p930408510/v105241/CP025746.scexe file://./hp/swpackages/CP025746.scexe     changed HP Firmware Flash for Emulex Fibre Channel Host Bus and Converged Network Adapters for VMware vSphere 5.5 and 6.0 HP Firmware Flash for Emulex Fibre Channel HBA's and CNA's for ESXi 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 CP025747.scexe ServerOptions Networking Storage Firmware - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    Offline:
    • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components
    Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    • Download the appropriate SPP
    • Add the component to the SPP
    • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
    • Run HPSUM
    • Add the ESXi host to be updated as a remote target/node
    • Enter the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
    • Follow HP Smart Update Manager Steps to complete the firmware update.
    • Refer to the SPP Documentation for detailed instructions at: www.hp.com/go/spp
    To use HP Insight Control for vCenter :
    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    To update firmware from VMware ESXi operating system on target server:
    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Logout
    • Disable Tech Support Mode on the ESXi host
    • Reboot your system, if required, for the firmware update to take effect.
    ]]>         firmware:emulex 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19a2 0700 103c 174b 19A2 0704 103C 174B 19a2 0702 103c 174b 19A2 0710 103C 3345 19A2 0712 103C 3345 19A2 0714 103C 3345 19A2 0710 103C 3315 19A2 0712 103C 3315 19A2 0714 103C 3315 19A2 0710 103C 3341 19A2 0710 103C 3340 19a2 0700 103c 174a 19A2 0704 103C 174A 19a2 0702 103c 174A 19a2 0704 103c 3314 19a2 0700 103c 3314 19a2 0700 103c 1747 19a2 0702 103c 3314 19a2 0700 103c 1746 10DF F100 103C 1719 10DF FE00 103C 1708 19A2 0710 103C 3344 19A2 0714 103C 3344 19A2 0712 103C 3344 19A2 0710 103C 337C 19A2 0714 103C 337C 19A2 0712 103C 337C 19A2 0710 103C 3376 19A2 0714 103C 3376 19A2 0712 103C 3376 19A2 0710 103C 337B 19A2 0714 103C 337B 19A2 0710 103C 184E 19A2 0712 103C 337B 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 103C 338F 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0720 103C 21D4 10DF 0722 103C 21D4 10DF 0724 103C 21D4 10DF 0720 103C 1935 10DF 0724 103C 1935 10DF 0722 103C 1935 10DF 0720 103C 1934 10DF 0724 103C 1934 10DF 0722 103C 1934 10DF 0720 103C 220A 10DF 0724 103C 220A 10DF 0722 103C 220A 10DF F100 103C 2238 10DF 0720 103C 803F hpsetup CP025747.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-sys/p1386975205/v105242/CP025747.scexe file://./hp/swpackages/CP025747.scexe     changed Online ROM Flash for VMware ESXi - Power Management Controller (HP ProLiant Gen8 Servers) Online ROM Flash - Power Management Controller (HP ProLiant Gen8 Servers) Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware ESXi 5.0 VMware vSphere 6.0 CP025526.scexe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."]]>         IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

    To use HP Insight Control for vCenter :

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf


    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:QLOGIC cpqsetup CP025526.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1237236578/v104410/CP025526.scexe file://./hp/swpackages/CP025526.scexe     changed Online ROM Flash for VMware ESXi - Power Management Controller Online ROM Flash - Power Management Controller Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025340.scexe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."]]>         IMPORTANT: This component requires that the CRU driver be loaded before the component can run. Moreover, there is a minimum version requirement for the CRU driver.

    To use HP Insight Control for vCenter :

    • Log in to the vSphere Client.
    • Select a server or cluster in the inventory tree.
    • Click the HP Insight Management tab.
    • Follow Insight Control for vCenter steps to update firmware using a Smart Component
    • Link to information about Insight Control for vCenter, including its documentation: http://www.hp.com/go/icvcenter
    • Link to “Deploying and updating VMware vSphere 5.0 on HP ProLiant Servers White Paper” that includes information of how to use Insight Control for vCenter to update firmware: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03285134/c03285134.pdf


    To update firmware from VMware ESXi operating system on target server:

    • Enable Tech Support Mode on the ESXi host.
    • Login as root. (You must be root in order to apply the ROM update.)
    • Place the Smart Component in a temporary directory.
    • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
    • Follow the directions given by the Smart Component.
    • Disable Tech Support Mode on the ESXi host
    • If required, reboot your system for the update to take effect immediately.
    ]]>         firmware:QLOGIC cpqsetup CP025340.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p714149248/v103797/CP025340.scexe file://./hp/swpackages/CP025340.scexe     changed Online ROM Flash for VMware ESXi - Advanced Power Capping Microcontroller Firmware for HP ProLiant BL/DL/MLGen9 Servers Online ROM Flash - Advanced Power Capping Microcontroller Firmware for HP ProLiant Gen9 Servers Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware vSphere 5.5 VMware vSphere 6.0 CP025310.scexe Server Firmware - Power Management English (US), Japanese "The software is not supported for installation on this system.
    You must install the iLO Channel Interface driver to use this component."]]>         IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
    The minimum CRU version for 5.5 is 5.5.4.1.
    The minimum CRU version for 5.1 is 5.0.3.9.


    Offline:

      • SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components 

      Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
    •  
      • Download the appropriate SPP
      • Add the component to the SPP
      • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
      • Run HP SUM
      • Add the ESXi host to be updated as a remote target/node
      • Enter IP or DNS address of the ESXi host to be updated
      • Enter the ESXi host credentials (root or administrator username and password)
      • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
      • Follow HP Smart Update Manager Steps to complete the firmware update
      • Refer to the SPP documentation for detailed instructions at:  www.hp.com/go/spp
         
      To use HP Insight Control for vCenter:
      • Log in to the vSphere Client
      • Select a server or cluster in the inventory tree
      • Click the HP Insight Management tab
      • Follow Insight Control for vCenter steps to update firmware using a Smart Component
      To update firmware from VMware ESXi operating system on target server:
      • Enable Tech Support Mode on the ESXi host
      • Login as root. (You must be root in order to apply the update)
      • Place the Smart Component in a temporary directory
      • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
      • Follow the directions given by the Smart Component
      • Logout
      • Disable Tech Support Mode on the ESXi host
      • Reboot your system, if required, for the firmware update to take effect
    ]]>         firmware:sd:powerpic cpqsetup CP025310.scexe http://ftp.hp.com/pub/softlib2/software1/sc-linux-fw/p1484770288/v103719/CP025310.scexe file://./hp/swpackages/CP025310.scexe     changed HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 5.1 (Driver Component). HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 5.1 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024244.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 8086 8D66 1590 009D 8086 8D06 1590 009C maintenancemode=true cp024244.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1971363584/v100472/cp024244.zip file://./hp/swpackages/cp024244.zip     changed HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 5.5 (Driver Component). HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 5.5 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024245.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 8086 8D66 1590 009D 8086 8D06 1590 009C maintenancemode=true cp024245.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1322932059/v100475/cp024245.zip file://./hp/swpackages/cp024245.zip     new HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 6.0 (Driver Component). HP Dynamic Smart Array B140i Controller Driver for VMware vSphere 6.0 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 6.0 cp023862.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 8086 8D66 1590 009D 8086 8D06 1590 009C maintenancemode=true cp023862.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p263870645/v99373/cp023862.zip file://./hp/swpackages/cp023862.zip     changed HP ProLiant Smart Array Controller Driver for VMware ESXi 5.0 (Driver Component). HP ProLiant Smart Array Controller Driver for VMware ESXi 5.0 (Driver Component). Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024555.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3353 103c 323b 103c 3351 103c 323b 103c 3352 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1928 103c 323c 103c 1921 maintenancemode=true cp024555.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p941333627/v101233/cp024555.zip file://./hp/swpackages/cp024555.zip     changed HP ProLiant Smart Array Controller Driver for VMware vSphere 5.1 (Driver Component). HP ProLiant Smart Array Controller Driver for VMware vSphere 5.1 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024556.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3353 103c 323b 103c 3351 103c 323b 103c 3352 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1924 103c 323c 103c 1921 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca maintenancemode=true cp024556.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p708490743/v101236/cp024556.zip file://./hp/swpackages/cp024556.zip     changed HP ProLiant Smart Array Controller Driver for VMware vSphere 5.5 (Driver Component). HP ProLiant Smart Array Controller Driver for VMware vSphere 5.5 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024557.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3353 103c 323b 103c 3351 103c 323b 103c 3352 103C 323B 103C 3356 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1924 103c 323c 103c 1921 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca maintenancemode=true cp024557.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p751071446/v101239/cp024557.zip file://./hp/swpackages/cp024557.zip     new HP ProLiant Smart Array Controller Driver for VMware vSphere 6.0 (Driver Component). HP ProLiant Smart Array Controller Driver for VMware vSphere 6.0 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 6.0 cp023828.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 103C 3230 103C 323D 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3353 103c 323b 103c 3351 103c 323b 103c 3352 103C 323B 103C 3356 103c 323c 103c 1926 103c 323c 103c 1928 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1924 103c 323c 103c 1921 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca maintenancemode=true cp023828.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1769362807/v99201/cp023828.zip file://./hp/swpackages/cp023828.zip     changed HP Dynamic Smart Array Controller Driver for VMware ESXi 5.0 (Driver Component). HP Dynamic Smart Array Controller Driver for VMware ESXi 5.0 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024885.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 maintenancemode=true cp024885.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p939700481/v102174/cp024885.zip file://./hp/swpackages/cp024885.zip     changed HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 5.1 (Driver Component). HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 5.1 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024886.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 maintenancemode=true cp024886.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p584449267/v102175/cp024886.zip file://./hp/swpackages/cp024886.zip     changed HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 5.5 (Driver Component). HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 5.5 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024887.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 maintenancemode=true cp024887.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p768283967/v102176/cp024887.zip file://./hp/swpackages/cp024887.zip     new HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 6.0 (Driver Component). HP Dynamic Smart Array B120i/B320i Controller Driver for VMware vSphere 6.0 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 6.0 cp024888.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1590 0045 1590 0045 8086 1D04 1590 0048 1590 0047 1590 0047 8086 1C04 1590 006C 8086 8C04 1590 0084 maintenancemode=true cp024888.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1377548522/v102177/cp024888.zip file://./hp/swpackages/cp024888.zip     changed HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for VMware ESXi 5.0(Driver Component). HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for VMware ESXi 5.0(Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024635.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 maintenancemode=true cp024635.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p771668062/v101415/cp024635.zip file://./hp/swpackages/cp024635.zip     changed HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for VMware vSphere 5.1 (Driver Component). HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for VMware vSphere 5.1 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024582.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 maintenancemode=true cp024582.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p295507939/v101292/cp024582.zip file://./hp/swpackages/cp024582.zip     changed HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for vSphere 5.5 (Driver Component). HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for vSphere 5.5 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024508.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 maintenancemode=true cp024508.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1890031541/v101099/cp024508.zip file://./hp/swpackages/cp024508.zip     new HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for vSphere 6.0 (Driver Component). HP H2xx SAS/SATA Host Bus Adapter (AMD64/EM64T) Driver for vSphere 6.0 (Bundle Smart Component). Hewlett-Packard Development Company, L.P. VMware vSphere 6.0 cp025628.xml Storage Server Driver - Storage Controller English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant

    Remote Online:

    •  Place the SPP on a USB key using the HP USB Key Creator Utility.
    •  Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    •  Mount the USB key on a remote server running Windows or Linux
    •  CD /hp/swpackages and ./hpsum
    •  Select the next button
    •  Click Add Single Target
    •  Type the IP or DNS address of the ESXi host to be updated
    •  Enter the ESXi host credentials (root or administrator username and password)
    •  Follow HP Smart Update Manager Steps and complete the update.

    To update the driver using VMware tools:

    •  Unzip this HP component to extract the driver offline bundle
    •  Use VMware VUM or esxcli commands to install the offline bundle.
    •  Refer to VMware documentation for information on VUM and the esxcli commands.
    ]]>         driver:vmware:zip 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 maintenancemode=true cp025628.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p285047589/v104739/cp025628.zip file://./hp/swpackages/cp025628.zip     new net-mlx4_en driver component for VMware 5.0 Mellanox Ethernet driver for mellanox devices Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024875.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 8020 15B3 1007 103C 801F maintenancemode=true maintenancemode=true cp024875.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1860259483/v102144/cp024875.zip file://./hp/swpackages/cp024875.zip     changed net-mlx4_en driver component for VMware 5.1 Mellanox Ethernet driver for mellanox devices Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024464.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 8020 15B3 1007 103C 801F maintenancemode=true maintenancemode=true cp024464.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1916511451/v100997/cp024464.zip file://./hp/swpackages/cp024464.zip     changed net-mlx4_en driver component for VMware 5.5 Mellanox Ethernet driver for mellanox devices Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024465.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 801F 15B3 1007 103C 8020 maintenancemode=true cp024465.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p55968061/v100998/cp024465.zip file://./hp/swpackages/cp024465.zip     new net-mst kernel module driver component for VMware 5.0 Mellanox mst kernel module driver component for mellanox devices Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024932.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 801F 15B3 1007 103C 8020 maintenancemode=false cp024932.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1204207627/v102342/cp024932.zip file://./hp/swpackages/cp024932.zip     changed net-mst kernel module driver component for VMware 5.1 Mellanox mst kernel module driver component for mellanox devices Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024466.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 801F 15B3 1007 103C 8020 maintenancemode=false cp024466.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p424180249/v100999/cp024466.zip file://./hp/swpackages/cp024466.zip     changed net-mst kernel module driver component for VMware 5.5 Mellanox mst kernel module driver component for mellanox devices Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 cp024938.xml Networking Server Driver - Network English (US) Remote Online: 
    1. Place the SPP on a USB key using the HP USB Key Creator Utility. 
    2. Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key. 
    3. Mount the USB key on a remote server running Windows or Linux 
    4. CD /hp/swpackages and ./hpsum 
    5. Select the next button 
    6. Click Add Single Target 
    7. Type the IP or DNS address of the ESXi host to be updated 
    8. Enter the ESXi host credentials (root or administrator username and password) 
    9. Follow HP Smart Update Manager Steps and complete the firmware update. 
    To update the driver using VMware tools:
    1. Unzip this HP component to extract the driver offline bundle
    2. Use VMware VUM or esxcli commands to install the offline bundle.
    3. Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 15b3 6764 103c 3313 15B3 1003 103C 18CD 15B3 1003 103C 18D6 15B3 1003 103C 1988 15B3 1003 103C 1777 15B3 1003 103C 18CE 15B3 1003 103C 18CF 15B3 1003 103C 17C9 15B3 1007 103C 801F 15B3 1007 103C 8020 maintenancemode=false cp024938.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p71857037/v102373/cp024938.zip file://./hp/swpackages/cp024938.zip     changed QLogic BR-series Fibre Channel driver component for VMware vSphere 5.0/5.1 QLogic BR-series driver for bfa Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 cp024857.xml ServerOptions Networking Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 1657 0013 1657 0014 1657 0017 1657 0014 1657 0013 103c 1742 1657 0017 103c 1743 1657 0021 103c 1779 cp024857.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p780974671/v102105/cp024857.zip file://./hp/swpackages/cp024857.zip     changed QLogic BR-series Fibre Channel driver component for VMware vSphere 5.5/6.0 QLogic BR-series driver for bfa Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024858.xml ServerOptions Networking Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 1657 0021 103c 1779 1657 0013 1657 0014 1657 0017 1657 0014 1657 0013 103c 1742 1657 0017 103c 1743 cp024858.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p606816725/v102106/cp024858.zip file://./hp/swpackages/cp024858.zip     changed Emulex Fibre Channel driver component for VMware vSphere 5.5 and vSphere 6.0 Emulex driver for lpfc Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp025037.xml ServerOptions Networking Storage Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF 0724 103C 21D4 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF F100 103C 2238 cp025037.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p171963659/v102660/cp025037.zip file://./hp/swpackages/cp025037.zip     changed Emulex Fibre Channel driver component for VMware vSphere 5.0/5.1 Emulex driver for lpfc Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 cp025234.xml ServerOptions Networking Storage Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 10DF F100 103C 3282 10DF F100 103C 3281 19A2 0714 103C 3344 19A2 0704 103C 174B 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0704 103C 174A 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 10DF F100 103C 338F 10DF F100 103C 1719 10DF FE00 103C 1708 10DF 0724 103C 21D4 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF F100 103C 2238 cp025234.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1090421818/v103462/cp025234.zip file://./hp/swpackages/cp025234.zip     changed QLogic Fibre Channel driver component for VMware vSphere 5.0/5.1 QLogic driver for qla2xxx Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 VMware ESXi 5.0 cp024634.xml ServerOptions Networking Storage Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 1077 2031 103C 1939 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E cp024634.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1052972651/v101414/cp024634.zip file://./hp/swpackages/cp024634.zip     changed QLogic Fibre Channel driver component for VMware vSphere 5.5 and vSphere 6.0 QLogic driver for qla2xxx Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024633.xml ServerOptions Networking Storage Software - Storage Fibre Channel English (US) To use HP Smart Update Manager from the HP Service Pack for ProLiant:


    Remote Online:
    • Place the SPP on a USB key using the HP USB Key Creator Utility.
    • Place the desired driver to be updated in the directory, /SPP20xxxxx/hp/swpackages on the USB key.
    • Mount the USB key on a remote server running Windows or Linux
    • CD /hp/swpackages and ./hpsum
    • Select the next button
    • Click Add Single Target
    • Type the IP or DNS address of the ESXi host to be updated
    • Enter the ESXi host credentials (root or administrator username and password)
    • Follow HP Smart Update Manager Steps and complete the firmware update.
    To update the driver using VMware tools:
    • Unzip this HP component to extract the driver offline bundle
    • Use VMware VUM or esxcli commands to install the offline bundle.
    • Refer to VMware documentation for information on VUM and the esxcli commands
    ]]>         driver:vmware:zip 1077 2031 103C 1939 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 3261 1077 2432 103C 1705 1077 2532 103C 338E cp024633.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1459522064/v101413/cp024633.zip file://./hp/swpackages/cp024633.zip     changed HP Emulex 10/20 GbE iSCSI Drivers for VMware ESXi 5.0 HP Emulex 10/20 GbE iSCSI Drivers for VMware ESXi 5.0 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024704.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 19A2 0712 103C 3344 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 3314 19A2 0712 103C 337C 19A2 0712 103C 3376 19A2 0712 103C 337B maintenancemode=true cp024704.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1365938356/v101696/cp024704.zip file://./hp/swpackages/cp024704.zip     changed HP Emulex 10/20 GbE iSCSI Drivers for VMware vSphere 5.1 HP Emulex 10/20 GbE iSCSI Drivers for VMware vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024730.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 19A2 0712 103C 3344 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 3314 19A2 0712 103C 337C 19A2 0712 103C 3376 19A2 0712 103C 337B 10DF 0722 103C 21D4 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 220A maintenancemode=true cp024730.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p865405453/v101728/cp024730.zip file://./hp/swpackages/cp024730.zip     changed HP Emulex 10/20 GbE iSCSI Drivers for VMware vSphere 5.5/6.0 HP Emulex 10/20 GbE iSCSI Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024732.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 19A2 0712 103C 3344 19A2 0712 103C 3345 19A2 0712 103C 3315 19a2 0702 103c 3314 19A2 0712 103C 337C 19A2 0712 103C 3376 19A2 0712 103C 337B 10DF 0722 103C 21D4 10DF 0722 103C 1935 10DF 0722 103C 1934 10DF 0722 103C 220A maintenancemode=true cp024732.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p147082172/v101733/cp024732.zip file://./hp/swpackages/cp024732.zip     changed HP Emulex 10/20 GbE Drivers for VMware ESXi 5.0 HP Emulex 10/20 GbE Drivers for VMware ESXi 5.0 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 cp024705.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 19A2 0710 103C 3344 19A2 0718 103C 3344 19A2 0710 103C 184E 19A2 0718 103C 184E 19A2 0710 103C 3345 19A2 0718 103C 3345 19A2 0710 103C 3315 19A2 0718 103C 3315 19A2 0710 103C 3341 19A2 0718 103C 3341 19A2 0710 103C 3340 19A2 0718 103C 3340 19a2 0700 103c 3314 19A2 0710 103C 337C 19A2 0718 103C 337C 19A2 0710 103C 3376 19A2 0718 103C 3376 19A2 0710 103C 337B 19A2 0718 103C 337B 19a2 0700 103c 1746 maintenancemode=true cp024705.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1678933711/v101698/cp024705.zip file://./hp/swpackages/cp024705.zip     changed HP Emulex 10/20 GbE Drivers for VMware vSphere 5.1 HP Emulex 10/20 GbE Drivers for VMware vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware vSphere 5.1 cp024731.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 19A2 0710 103C 3344 19A2 0718 103C 3344 19A2 0710 103C 184E 19A2 0718 103C 184E 19A2 0710 103C 3345 19A2 0718 103C 3345 19A2 0710 103C 3315 19A2 0718 103C 3315 19A2 0710 103C 3341 19A2 0718 103C 3341 19A2 0710 103C 3340 19A2 0718 103C 3340 19a2 0700 103c 3314 19A2 0710 103C 337C 19A2 0718 103C 337C 19A2 0710 103C 3376 19A2 0718 103C 3376 19A2 0710 103C 337B 19A2 0718 103C 337B 19a2 0700 103c 1746 10DF 0720 103C 21D4 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 220A 10DF 0720 103C 803F 10DF 0728 103C 803F maintenancemode=true cp024731.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1796269101/v101731/cp024731.zip file://./hp/swpackages/cp024731.zip     changed HP Broadcom 1/10/20 GbE Multifunction Drivers for VMware ESXi 5.0/vSphere 5.1 HP Broadcom 1/10/20 GbE Multifunction Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024588.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 168E 103C 18D3 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16A4 103C 22FA 14E4 16AD 103C 22FA 14E4 1639 103C 7055 maintenancemode=true cp024588.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1205188566/v101301/cp024588.zip file://./hp/swpackages/cp024588.zip     changed HP Broadcom 1/10/20 GbE Multifunction Drivers for VMware vSphere 5.5/6.0 HP Broadcom 1/10/20 GbE Multifunction Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024589.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip driver:vmware:zip 14E4 168E 103C 1931 14E4 168E 103C 193A 14E4 168E 103C 3382 14E4 168E 103C 339D 14E4 168E 103C 17A5 14E4 168E 103C 1798 14E4 1639 103C 7059 14E4 164C 103C 7037 14E4 16AC 103C 703D 14E4 16A2 103C 1917 14E4 16A2 103C 1916 14E4 168E 103C 1933 14E4 168E 103C 1930 14E4 168E 103C 1932 14E4 1650 103C 171C 14E4 1650 103C 7058 14E4 163A 103C 171D 14E4 16AD 103C 1917 14E4 16AD 103C 1916 14E4 16AF 103C 1933 14E4 16AF 103C 1930 14E4 16AF 103C 193A 14E4 16AF 103C 1932 14E4 16AF 103C 18D3 14E4 16AF 103C 339D 14E4 16AF 103C 17A5 14E4 16AF 103C 3382 14E4 16AF 103C 1798 14E4 16AF 103C 1931 14E4 168E 103C 18D3 14E4 16AE 103C 1798 14E4 16AE 103C 3382 14E4 16AE 103C 339D 14E4 16AE 103C 17A5 14E4 16AE 103C 18D3 14E4 16AE 103C 193A 14E4 16AE 103C 1930 14E4 16AE 103C 1931 14E4 16AE 103C 1932 14E4 16AE 103C 1933 14E4 16A4 103C 1916 14E4 16A4 103C 1917 14E4 16A2 103C 22FA 14E4 16A4 103C 22FA 14E4 16AD 103C 22FA 14E4 1639 103C 7055 maintenancemode=true cp024589.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p865411444/v101303/cp024589.zip file://./hp/swpackages/cp024589.zip     changed HP Emulex 10/20 GbE Drivers VMware vSphere 5.5/6.0 HP Emulex 10/20 GbE iSCSI Drivers VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024733.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 19A2 0710 103C 3344 19A2 0718 103C 3344 19A2 0710 103C 184E 19A2 0718 103C 184E 19A2 0710 103C 3345 19A2 0718 103C 3345 19A2 0710 103C 3315 19A2 0718 103C 3315 19A2 0710 103C 3341 19A2 0718 103C 3341 19A2 0710 103C 3340 19A2 0718 103C 3340 19a2 0700 103c 3314 19A2 0710 103C 337C 19A2 0718 103C 337C 19A2 0710 103C 3376 19A2 0718 103C 3376 19A2 0710 103C 337B 19A2 0718 103C 337B 19a2 0700 103c 1746 10DF 0720 103C 21D4 10DF 0720 103C 1935 10DF 0720 103C 1934 10DF 0720 103C 220A 10DF 0720 103C 803F 10DF 0728 103C 803F maintenancemode=true cp024733.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p742270069/v101736/cp024733.zip file://./hp/swpackages/cp024733.zip     changed HP Intel igb Drivers for VMware ESXi 5.0/vSphere 5.1 HP Intel igb Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024682.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 8086 1521 103C 2003 8086 1521 103C 2226 8086 1523 103C 1989 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 150e 103c 1780 maintenancemode=true cp024682.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p2116831488/v101597/cp024682.zip file://./hp/swpackages/cp024682.zip     changed HP Intel igb Drivers for VMware vSphere 5.5/6.0 HP Intel igb Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024683.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 8086 1521 103C 2003 8086 1521 103C 2226 8086 1523 103C 1989 8086 1523 103C 339F 8086 1521 103C 17D1 8086 1521 103c 3380 8086 1521 103C 339E 8086 1521 103C 337F 8086 1523 103C 18D1 8086 10C9 103C 323F 8086 10E7 103C 31FF 8086 150e 103c 1780 maintenancemode=true cp024683.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p366494300/v101598/cp024683.zip file://./hp/swpackages/cp024683.zip     changed HP Intel ixgbe Drivers for VMware ESXi 5.0/vSphere 5.1 HP Intel ixgbe Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024684.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 8086 10FB 103C 2159 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10FB 103C 211B 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 maintenancemode=true cp024684.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p321906869/v101599/cp024684.zip file://./hp/swpackages/cp024684.zip     changed HP Intel ixgbe Drivers for VMware vSphere 5.5/6.0 HP Intel ixgbe Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024685.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 8086 10FB 103C 2159 8086 1528 103C 211A 8086 1528 103C 192D 8086 10FB 103C 17D3 8086 10FB 103C 211B 8086 10F8 103C 17D2 8086 10FB 103C 17D0 8086 10F8 103C 18D0 8086 1515 103C 211A 8086 1530 0000 0000 8086 1515 103C 192D 8086 152E 0000 0000 8086 10ED 103C 211B 8086 10ED 103C 17D3 8086 10ED 103c 17D2 8086 10ED 103C 17D0 8086 10ED 103C 18D0 maintenancemode=true cp024685.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p260966995/v101600/cp024685.zip file://./hp/swpackages/cp024685.zip     changed HP QLogic P3 Drivers for VMware ESXi 5.0/vSphere 5.1 HP QLogic P3 Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024706.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 4040 0100 103c 1740 4040 0100 103C 705A maintenancemode=true cp024706.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p151832549/v101700/cp024706.zip file://./hp/swpackages/cp024706.zip     changed HP QLogic P3 Drivers for VMware vSphere 5.5/6.0 HP QLogic P3 Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024735.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 4040 0100 103c 1740 4040 0100 103C 705A maintenancemode=true cp024735.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1920043723/v101743/cp024735.zip file://./hp/swpackages/cp024735.zip     changed HP QLogic P3P iSCSI Drivers for VMware ESXi 5.0/vSphere 5.1 HP QLogic P3P iSCSI Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024686.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 1077 8022 103C 3347 1077 8022 103C 1957 maintenancemode=true cp024686.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1007465340/v101605/cp024686.zip file://./hp/swpackages/cp024686.zip     changed HP QLogic P3P iSCSI Drivers for VMware vSphere 5.5/6.0 HP QLogic P3P iSCSI Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024687.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip driver:vmware:zip 1077 8022 103C 3347 1077 8022 103C 1957 maintenancemode=true cp024687.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1059735659/v101607/cp024687.zip file://./hp/swpackages/cp024687.zip     changed HP QLogic P3P Drivers for VMware ESXi 5.0/vSphere 5.1 HP QLogic P3P Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024729.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 maintenancemode=true cp024729.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1427078079/v101726/cp024729.zip file://./hp/swpackages/cp024729.zip     changed HP QLogic P3P Drivers for VMware vSphere 5.5/6.0 HP QLogic P3P Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024734.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 1077 8020 103C 3346 1077 8020 103C 1957 1077 8020 103C 3733 maintenancemode=true cp024734.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p771099345/v101738/cp024734.zip file://./hp/swpackages/cp024734.zip     changed HP Broadcom tg3 Ethernet Drivers for VMware ESXi 5.0/vSphere 5.1 HP Broadcom tg3 Ethernet Drivers for VMware ESXi 5.0/vSphere 5.1 Hewlett-Packard Development Company, L.P. VMware ESXi 5.0 VMware vSphere 5.1 cp024590.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1665 103C 22BD 14E4 1657 103C 22BE maintenancemode=true cp024590.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p2099239213/v101305/cp024590.zip file://./hp/swpackages/cp024590.zip     changed HP Broadcom tg3 Ethernet Drivers for VMware vSphere 5.5/6.0 HP Broadcom tg3 Ethernet Drivers for VMware vSphere 5.5/6.0 Hewlett-Packard Development Company, L.P. VMware vSphere 5.5 VMware vSphere 6.0 cp024591.xml Networking Server Driver - Network English (US) To remotely install this driver online using the HP Smart Update Manager (HPSUM) from the HP Service Pack for ProLiant (SPP):
    1. Place the SPP on a USB key using the HP USB Key Creator Utility.
    2. Copy this driver component to the directory /SPP20xxxxx/hp/swpackages on the USB key.
    3. Mount the USB key on a remote server running Windows or Linux.
    4. Change directories to /hp/swpackages and execute ./hpsum.
    5. Select the "next" button.
    6. Click "Add Single Target."
    7. Enter the IP or DNS address of the ESXi host to be updated.
    8. Enter the ESXi host credentials (root or administrator username and password).
    9. Follow HP Smart Update Manager instructions to complete the driver update.

    To install this driver using VMware tools:
    1. Unzip the component zip file to extract the driver offline bundle.
    2. Run the VMware vSphere Update Manager (VUM) or the "esxcli" commands to install the offline bundle.
    3. Refer to VMware documentation for information on the VUM and the esxcli commands
    ]]>         driver:vmware:zip 14E4 165F 103C 1786 14E4 165F 103C 2133 14E4 1655 103C 18D2 14E4 1657 103C 3383 14E4 1657 103C 169D 14E4 1657 103C 3372 14E4 1657 103C 1904 14E4 165B 103C 705D 14E4 1679 103C 170C 14E4 1665 103C 22BD 14E4 1657 103C 22BE maintenancemode=true cp024591.zip http://ftp.hp.com/pub/softlib2/software1/component-vmware/p1730543307/v101306/cp024591.zip file://./hp/swpackages/cp024591.zip