To update the driver using VMware tools:
To update the driver using VMware tools:
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Release Version and/or Date:
2.00 (B)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
2.00 (B)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
# ./ CP034973.scexe in the '/usr/lib/i386-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/i386-linux-gnu/firmware-nvmepic-gen9-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
# ./ CP034973.scexe in the '/usr/lib/i386-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/i386-linux-gnu/firmware-nvmepic-gen9-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISO上のSmart Update Manager 8.0.0以降を使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager 8.0.0 or later, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
.
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
.
Known Issues:
None
1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) がインストールおよび実行されている必要があります。
ESXi 5.1、5.5、ESXi 6.0およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.1の最小CRUバージョンは5.0.3.9です。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、5.5および5.1用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>5.1の最小CRUバージョンは5.0.3.9です。
5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>HPE Gen10 Innovation Engine（IE）ファームウェアバージョン0.1.5.2以降
Service Pack for ProLiant(SPP)から入手可能なWindows用のiLO 5 Channel Interface Driver(CHIF)。
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートを直ちに有効にするにはシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISOを使用して実行できます。
オプション1：
オプション2：
このメカニズムは、複数のサーバーに対する更新を実行するためにiLOによってスクリプト化できることに注意してください。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾ Firmware version HPD3 supports NDU (non-disruptive update) firmware updates.
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾ Firmware version HPD3 supports NDU (non-disruptive update) firmware updates.
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。 ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
hp-healthに関連するすべてのファイルの一覧を取得するには、次のようにタイプします。
rpm -qp -requires hp-health-< version >.rpm
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-health-<version>.rpm
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-health status
以下のコマンドを実行してヘルプを参照してください。
man hp-health
または
man hp_mgmt_install
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾None
Known Issues:
None
SPP上のSmart Update Managerと組み合わせて、HPE BladeSystem c-Class Virtual Connectモジュールにファームウェアを実装できます。
コンポーネントから解凍したファームウェアをHPE BladeSystem c-Class Virtual ConnectモジュールにVirtual Connect Supportユーティリティを使用して展開します。
Smart Update ManagerおよびSPPとコンポーネントを使用する場合のインストール時の注意
コンポーネントから解凍したファームウェアを使用する場合のインストール時の注意
コンポーネントのファームウェアバイナリを展開します。
HPE BladeSystem c-Classバーチャルコネクトモジュールと同じネットワーク上のシステムにファームウェアイメージファイルをコピーします。
Virtual Connect Support Utilityを起動してファームウェアを適用します。
HPE VC FlexFabric-20/40 F8バージョン4.75、HPE VC Flex-10/10Dバージョン4.75、HPE VC FlexFabric 10Gb/24-portバージョン4.75、HPE VC Flex-10 10Gbバージョン4.75、HPE VC 8Gb 24-Port FCバージョン4.15、HPE VC 16Gb 24-Port FCバージョン4.15、およびHPE VC 8Gb 20-Port FCバージョン2.20ファームウェアをインストールするには、HPE BladeSystem c-Classバーチャルコネクトサポートユーティリティのバージョン 1.14.0（またはそれ以降）を使用する必要があります。HPE BladeSystem c-Classバーチャルコネクトサポートユーティリティリリースノートを参照してください。
複数エンクロージャー環境でVC 2.xxリリースバージョンからVC 4.75リリースへ直接アップグレードするとき、ネットワーク停止を引き起こすことがある深刻な問題をご承知おきください。マルチエンクロージャーセットアップでは、最初にVC 2.xxからVC 3.70またはVC 4.10へアップグレードし、その後、VC 3.70またはVC 4.10からVC 4.50へし、その後VC 4.50からVC 4.75アップグレードしてください。
Virtual Connectファームウェア4.31よりも下位からVirtual Connect 4.75以降へHPE VC 8Gb 24-Port FCモジュールをアップデートするには、まず、Virtual Connectファームウェアバージョン4.4xまたはバージョン4.50（推奨バージョンは4.50）のいずれかでこれらのモジュールをアップデートしてからVirtual Connect 4.75以降でアップデートする必要があります。
USB Keyユーティリティは、ポータブルUSBキーストレージデバイスにSPPをコピーするために使用されます。 ユーティリティの最新バージョン（v2.0.0.0）は64ビット版のみであることに注意してください。 32ビット版のアプリケーションが必要な場合は、バージョン1.8を使用してください。しかし、このバージョンは、4GBよりも大きなISOイメージでは動作しません。
注記：ファームウェアのアップグレード手順についてはリリースノートの重要情報の項を参照してください。
]]>In conjunction with the Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HPE BladeSystem c-Class Virtual Connect module.
Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HPE BladeSystem c-Class Virtual Connect modules.
Installation Notes for using the component with Smart Update Manager and SPP
Installation Notes for using the firmware extracted from the component
Extract the firmware binary out of the component.
Place the firmware image file onto a system on the same network as the HPE BladeSystem c-Class Virtual Connect module.
Start the Virtual Connect Support Utility and deploy the firmware.
HPE requires using the HPE BladeSystem c-Class Virtual Connect Support Utility version 1.14.0 (or higher) to install the HPE VC FlexFabric-20/40 F8 version 4.75, HPE VC Flex-10/10D version 4.75, HPE VC FlexFabric 10Gb/24-port version 4.75, HPE VC Flex-10 10Gb version 4.75, HPE VC 8Gb 24-Port FC version 4.15, HPE VC 16Gb 24-Port FC version 4.15, and HPE VC 8Gb 20-Port FC version 2.20 firmware. Please read the HPE BladeSystem c-Class Virtual Connect Support Utility release notes.
Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.75 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.50 then upgrade from VC 4.50 to VC 4.75 in a Multi-Enclosure setup.
To update HPE VC 8Gb 24-Port FC module(s) from Virtual Connect firmware 4.31 or lower to Virtual Connect 4.75 or higher, these module(s) must first be updated with either Virtual Connect firmware version 4.4x or version 4.50 (Recommended version is 4.50) before they can be updated with Virtual Connect 4.75 or higher.
The USB Key Utility is used to copy the SPP onto a portable USB key storage device. Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.
Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.
]]>リモートオンライン:
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
ファームウェアの関連性：
なし
改善点/新しい機能：
Smart Update Managerとの統合を強化しました
修正された問題点：
なし
既知の問題点：
なし
Firmware Dependency:
None
Enhancements/New Features:
Improved integration with Smart Update Manager
Problems Fixed:
None
Known Issues:
None
hp-healthに関連するすべてのファイルの一覧を取得するには、次のようにタイプします。
rpm –qp –requires hp-health-
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-health-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-health status
以下のコマンドを実行してヘルプを参照してください。
man hp-health
または
man hp_mgmt_install
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for an issue where the LED would continue blinking after a Sanitize operation completed.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for an issue where the LED would continue blinking after a Sanitize operation completed.
Known Issues:
None
Installation Notes for using the component as a standalone component
This SCEXE component is a self-extracting executable. The SCEXE file unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
sh cpxxxxxx.scexe -target <netAddress> -user <username> -passwd <password> [-s[ilent]] [-f[orce]] [-logdir <path>]
where cpxxxxxx.scexe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are:
Installation Notes for using the component with HPE Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
Installation Notes for using the component as a standalone component
This SCEXE component is a self-extracting executable. The SCEXE file unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
sh cpxxxxxx.scexe -target <netAddress> -user <username> -passwd <password> [-s[ilent]] [-f[orce]] [-logdir <path>]
where cpxxxxxx.scexe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are:
Installation Notes for using the component with HPE Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.90
Previous Version of Firmware
Version 4.85
Firmware Dependency
For firmware compatibility information,see the HPE Service Pack for ProLiant Information Libraryat:
https://www.hpe.com/servers/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HPE Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HPE ProLiant BL servers. (When using HPE SUM to create the custom ISO image, select Firmware as the Component Type, and select HPE ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HPE BladeSystem Onboard Administrator User Guide. More HPE SUM information can be found via HPE Smart Update Manager online help or at the HPE Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.71 is FIPS certified as referenced in the 140-2 In Process list located at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140InProcess.pdf.
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.90
Previous Version of Firmware
Version 4.85
Firmware Dependency
For firmware compatibility information,see the HPE Service Pack for ProLiant Information Libraryat:
https://www.hpe.com/servers/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HPE Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HPE ProLiant BL servers. (When using HPE SUM to create the custom ISO image, select Firmware as the Component Type, and select HPE ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HPE BladeSystem Onboard Administrator User Guide. More HPE SUM information can be found via HPE Smart Update Manager online help or at the HPE Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.71 is FIPS certified as referenced in the 140-2 In Process list located at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140InProcess.pdf.
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートする予定のコンポーネントをUSBキーの\packagesディレクトリにコピーします。 HP SUM 7.6.0またはそれ以前のバージョンを使用するには、コンポーネントをUSBキーの\hp\swpackagesにコピーしてください。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \packages on the USB key. To use with HP SUM 7.6.0 or earlier, place the components in \hp\swpackages on the USB Key.
Update the firmware and software in the usual manner.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 3.10.0-862.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel7u5.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel7u5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 3.10.0-862.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel7u5.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel7u5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.40 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
]]>
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.40 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
]]>
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
]]>
1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) がインストールおよび実行されている必要があります。
ESXi 5.1、5.5、ESXi 6.0およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.1の最小CRUバージョンは5.0.3.9です。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、5.5および5.1用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>5.1の最小CRUバージョンは5.0.3.9です。
5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
Additional Information:
To use Smart Update Manager from the Service Pack for ProLiant :
Additional Information:
リリースバージョンおよび/または日付:
1.51
最新の推奨またはクリティカルバージョン：
1.00 (E)
前のファームウェアバージョン：
NA
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
1.51
Last Recommended or Critical Version:
1.00 (E)
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
HP Smart Update Managerを使用するには、 Service Pack for ProLiant:から以下の手順に従ってください
]]>
To use Smart Update Manager from the Service Pack for ProLiant
]]>
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Enhancements/New Features:
Problems Fixed:
Known Issues:
Enhancements/New Features:
Problems Fixed:
Known Issues:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.
Update the firmware and software in the usual manner.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.
Update the firmware and software in the usual manner.
http://www.hpe.com/storage/spock/
展開のためにHPE SUMによりこのファームウェアコンポーネントが識別される前に、SUMが供給するQLogicドライバーをインストールする必要があります。OOBドライバーは、 http://www.hpe.com/servers/spp/download/ のService Pack for ProLiant（SPP）から入手できます。
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください:http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>http://www.hpe.com/storage/spock/
このファームウェアコンポーネントが展開のためにSUMで識別される前に、HPEで提供しているイネーブルメントキットをインストールする必要があります。
OOBドライバーおよびイネーブルメントキットは、http://www.hpe.com/servers/spp/downloadのService Pack for ProLiant（SPP）から入手できます。
イネーブルメントキットは、OSインストールメディアからlibHBAAPIパッケージをインストールしたターゲット環境を必要とします。
FCドライバーキットをインストールし、再起動してからイネーブルメントキットをインストールしてください。
追加の要件:
フラッシュエンジンを動作させるためにsyslogデーモンが実行されている環境が必要です
コンポーネントでEmulexホストバスアダプター（HBA）を検出できるようにするには、32-bit netlink library（libnl.so）がインストールされている環境が必要です
http://www.hpe.com/storage/spock/
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
The OOB driver and enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FC Driver Kit, reboot, and then install the Enablement Kit.
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex Host Bus Adapters(HBAs)
リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online:
To update the driver using VMware tools:
]]>
hp-smh-templatesに関連するすべてのファイルの一覧を取得するには、次のようにタイプします。
rpm –qp –-requires hp-smh-templates-
To get the list of all dependency files for hp-smh-templates type:
rpm –qp –-requires hp-smh-templates-<version>.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-smh-templates-<version>.rpm
パッケージがインストールされているかどうか確認するには、次のようにタイプします。
rpm -q hp-smh-templates
以下のコマンドを実行してヘルプを参照してください。
man hp-smh-templates
]]>To install the package type:
rpm -ivh hp-smh-templates-<version>.rpm
To check whether the package is installed type:
rpm –q hp-smh-templates
Additional help is available by typing:
man hp-smh-templates
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>Check dependency failed.
Current version: iLOx x.xx
Minimum version required: iLO4 2.20
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system
]]>Check dependency failed.
Current version: iLOx x.xx
Minimum version required: iLO4 2.20
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system
]]>Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン (SPPオフラインモードは特別なLinux OS環境を起動します。したがって、VMware Smartコンポーネントではなく、Linux Smartコンポーネントが使用します)：
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Release Version and/or Date:
1.78 (B)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.78
Firmware Dependency:
None
Enhancements/New Features:
Added VMware vSphere 6.7 OS support
Problems Fixed in version 1.78:
None
Known Issues:
None
]]>
Release Version and/or Date:
1.78 (B)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.78
Firmware Dependency:
None
Enhancements/New Features:
Added VMware vSphere 6.7 OS support
Problems Fixed in version 1.78:
None
Known Issues:
None
]]>
これは、自己解凍型実行可能モジュールです。コマンドラインコンソールかWindowsグラフィカルユーザーインターフェイスからこのモジュールを実行できます。
GUIオプション：
CLIオプション：
次のコマンドを入力して、Smartコンポーネントを実行します：CP0xxxxx.exe /s
HP Service Pack for ProLiant（SPP）からSmart Update Manager（SUM）を使用するには、以下の手順に従ってください。
オンライン：
注記：バンドエンクロージャーフラッシュのオプション：
パラメーター 説明
-----------------------------------------------------------------------------
/h、/? コマンドライン使用法のヘルプ(ダイアログボックス)が表示されます。
/s ユーザー操作なしでインストールします
/sを使用すると以下のコマンドが適用されます：
/f 最新である場合、ダウングレードまたは再インストールできます
このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant :
Additional Information:
To use Smart Update Manager from the Service Pack for ProLiant :
Additional Information:
リリースバージョンおよび/または日付:
1.00(B)
最新の推奨またはクリティカルバージョン：
1.00
前のファームウェアバージョン：
1.00
ファームウェアの関連性：
なし
改善点/新しい機能：
修正された問題点：
なし
既知の問題点：
なし
Release Version and/or Date:
1.00(B)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
ターゲットサーバー上のWindowsオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
]]>
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD4(B):
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD4(B):
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
None
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
This firmware contains a change to prevent a drive reset issue, which may affect performance.
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
This firmware contains a change to prevent a drive reset issue, which may affect performance.
Known Issues:
None
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
irmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
irmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
リモートオンライン:
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online:
To update the driver using VMware tools:
]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
New servo which disables a feature that could cause unrecoverable data errors.
A fix to prevent the drive from becoming unresponsive during certain mixed read/write random workloads.
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
New servo which disables a feature that could cause unrecoverable data errors.
A fix to prevent the drive from becoming unresponsive during certain mixed read/write random workloads.
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
[インストール]ボタンをクリックしてサービスインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-ams-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-ams status
以下のコマンドを実行してヘルプを参照してください。
man hp-ams
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>HP iLO 4が、SNMPに、net-snmpユーティリティがインストールされたLinuxシステムから通信していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
サーバー上でHP AMSが動作していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
セットアップが完了したらコンピューターをリブートする必要があります。
]]>A REBOOT is required for your computer when the setup is complete.
]]>
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant（SPP）ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
rpmインストールによるファームウェアのアップデート:
# ./CP032706.scexe（'/usr/lib/x86_64-linux-gnu/hp-scexe-compat'で実行）（または）
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/firmware-nvdimm-16gb-*' location
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
HP Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン:
Updating firmware with rpm installed:
# ./CP032706.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/firmware-nvdimm-16gb-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Linux:
VMWare:
Linux:
VMWare:
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
Known Issues:
None
amsd only supported on HPE ProLiant Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 6.9
amsd only supported on HPE ProLiant Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 6.9
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
]]>
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| OPA HFI Adapter Type | Firmware Version | SSID |
| HPE 100Gb 1-Port OP101 QSFP28 x8 OPA Adapter | 1.8.1.0.0 | E7 |
| HPE 100Gb 1-Port OP101 QSFP28 x16 OPA Adapter | 1.8.1.0.0 | E8 |
| HPE Apollo 100Gb 1-port Intel Omni-Path Architecture 860z Mezzanine FIO Adapter | 1.8.1.0.0 | 21C |
| OPA HFI Adapter Type | Firmware Version | SSID |
| HPE 100Gb 1-Port OP101 QSFP28 x8 OPA Adapter | 1.8.1.0.0 | E7 |
| HPE 100Gb 1-Port OP101 QSFP28 x16 OPA Adapter | 1.8.1.0.0 | E8 |
| HPE Apollo 100Gb 1-port Intel Omni-Path Architecture 860z Mezzanine FIO Adapter | 1.8.1.0.0 | 21C |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
Enhancements/New Features:
Problems Fixed:
Known Issues:
パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-ams-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-ams status
以下のコマンドを実行してヘルプを参照してください。
man hp-ams
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>HP iLO 4が、SNMPに、net-snmpユーティリティがインストールされたLinuxシステムから通信していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
サーバー上でHP AMSが動作していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
hp-healthに関連するすべてのファイルの一覧を取得するには、次のようにタイプします。
rpm –qp –requires hp-health-
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-health-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-health status
以下のコマンドを実行してヘルプを参照してください。
man hp-health
または
man hp_mgmt_install
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPGB (B):
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPGB (B):
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Service Pack for ProLiantからHP Smart Update Managerを使用するには、以下の手順に従ってください。
]]>
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
8.32 (C)
Last Recommended or Critical Version:
8.32
Previous Version of Firmware:
8.32
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
8.32 (C)
Last Recommended or Critical Version:
8.32
Previous Version of Firmware:
8.32
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
このコマンドは、"/usr/lib/x86_64-linux-gnu"へコンテンツを抽出します。
CP034679.scexeスクリプトは、scexe-compatフォルダーにあります。詳細については、firmware-nic-*フォルダーのCP034679.txtファイルを参照してください。irmware-nic-フォルダーの実際の名前は、インストールされるrpmのバージョンに基づきます。
rpmのインストールなしでのアダプターファームウェアのアップデート：
これは、現在のディレクトリの'usr'フォルダーへrpmの内容を抽出します。
追加情報:
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP034679.scexe script is located in the "scexe-compat'' folder. Further information is available in CP034679.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Bootcodeバージョン | NCSIバージョン | MBAバージョン | UEFIバージョン | CCMバージョン | RoCEバージョン |
| HPE Ethernet 10Gb 2ポート535FLR-Tアダプター | 214.0.202.0 | 214.0.203.0 | 214.0.181.0 | 214.0.182.0 | 214.0.166.0 | 214.0.182.0 |
| HPE Ethernet 10Gb 2ポート535Tアダプター | ||||||
| HPE Ethernet 10/25Gb 2ポート631FLR-SFP28アダプター | ||||||
| HPE Ethernet 10/25Gb 2ポート631SFP28アダプター |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 214.0.202.0 | 214.0.203.0 | 214.0.181.0 | 214.0.182.0 | 214.0.166.0 | 214.0.182.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter |
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG2(B):
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG2(B):
Problems Fixed:
Known Issues:
None
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
リリースバージョンおよび/または日付:
1.00(C)
最新の推奨またはクリティカルバージョン：
1.00
前のファームウェアバージョン：
1.00
ファームウェアの関連性：
なし
改善点/新しい機能：
修正された問題点：
なし
既知の問題点：
なし
Release Version and/or Date:
1.00(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware with rpm installed:
# ./CP033363.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-46a4d957a7-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
# ./CP033363.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-46a4d957a7-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
8.32
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
8.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
System can potentially stop responding with no lockup code due to livelock condition where the RAID Stack thread is polling a queue for a completion to be returned by the base code firmware
Known Issues:
None
Release Version and/or Date:
8.32
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
8.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
System can potentially stop responding with no lockup code due to livelock condition where the RAID Stack thread is polling a queue for a completion to be returned by the base code firmware
Known Issues:
None
To install or upgrade the driver type:
# rpm -Uvh hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by SUM for deployment. The latest driver is available on the HPE.com website at http://www.hpe.com/.
The FCoE/iSCSI OOB driver and FCoE enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by SUM for deployment. The latest driver is available on the HPE.com website at http://www.hpe.com/.
The FCoE/iSCSI OOB driver and FCoE enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVMバージョン | OROMバージョン | シングルNVMバージョン |
|---|---|---|---|
| HP Ethernet 1Gb 2ポート 361iアダプター | 80000CD5 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2ポート 361Tアダプター | 80000F91 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2ポート 363iアダプター | 80000D00 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i通信ボード | 80000EBF | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート366iアダプター | 80000E24 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート 366FLRアダプター | 80000F44 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート 366Tアダプター | 80000E81 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2ポート368iアダプター | 80001669 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2ポート368FLR-MMTアダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4ポート369iアダプター | 8000166A | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560FLBアダプター | 800008F0 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560FLR-SFP+ アダプター | 80000838 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560M アダプター | 8000083D | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート560SFP+アダプター | 80000835 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568iアダプター | 8000166B | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568FLR-MMSFP+アダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568FLR-MMTアダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート563iアダプター | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2ポート562FLR-SFP+アダプター | 80004005 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2ポート562FLR-Tアダプター | 80000D96 | 1.2028.0 | 10.4.4 |
| HPE Ethernet 10Gb 2ポート562SFP+アダプター | 80004004 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2ポート562Tアダプター | 80000D95 | 1.2028.0 | 10.4.4 |
| HPE Synergy 4610C 10/25Gb Ethernetアダプター | 800040F9 | 1.2028.0 | 10.4.7 |
コンボイメージv1.2028.0は以下を含みます：Boot Agent: 1GbE - v1.5.86、10GbE - v2.4.32、40GbE - v1.1.02 & UEFIドライバー：1GbE - v8.6.06、10GbE - v7.1.06、40GbE - v3.4.06
コンボイメージv1.1375.0は以下を含みます：Boot Agent: 1GbE - v1.5.72、10GbE - v2.3.46、40GbE - v1.0.21 &UEFIドライバー: 1GbE - v6.9.13、10GbE - v5.0.20、40GbE - v1.5.14
シングルNVMバージョンは、以前に使用されていたバージョンEEPROM/NVMまたはOROMバージョンの代わりに統合されたバージョンを表す新しいファームウェア形式です。
]]>| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version |
|---|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000F91 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000F44 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366T Adapter | 80000E81 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2-port 368i Adapter | 80001669 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 369i Adapter | 8000166A | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008F0 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568i Adapter | 8000166B | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 563i Adapter | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 80004005 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2-port 562FLR-T Adapter | 80000D96 | 1.2028.0 | 10.4.4 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 80004004 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2-port 562T Adapter | 80000D95 | 1.2028.0 | 10.4.4 |
| HPE Synergy 4610C 10/25Gb Ethernet Adapter | 800040F9 | 1.2028.0 | 10.4.7 |
The combo image v1.2028.0 includes: Boot Agent: 1GbE - v1.5.86, 10GbE - v2.4.32, 40GbE - v1.1.02 & UEFI Drivers: 1GbE - v8.6.06, 10GbE - v7.1.06, 40GbE - v3.4.06
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Removes a vendor unique sense code that the controller does not handle properly.
Includes changes to eliminate the cause of a potential hang condition.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Removes a vendor unique sense code that the controller does not handle properly.
Includes changes to eliminate the cause of a potential hang condition.
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware has a change that allows the drive to meet the requirements for Azure Stack certification.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware has a change that allows the drive to meet the requirements for Azure Stack certification.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。ダウングレードに関する制限について詳しくは、カスタマーアドバイザリhttps://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069764en_usを参照してください。
]]>When updating firmware, refer to the Revision History and update to the versions one by one as stepping up or down a ladder until the version needed is reached. For more information about downgrade limitation, refer to the following Customer advisory: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069764en_us.
]]>HP Smart Update Managerを使用するには、HPE Service Pack for ProLiantから以下の手順に従ってください：
To use HP Smart Update Manager from the Service Pack for ProLiant :
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.4.73-5-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.4_k4.4.73_5-OFED.4.4.0.1.3.1.gb171cef.sles12sp3.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.sles12sp3.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.4.73-5-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.4_k4.4.73_5-OFED.4.4.0.1.3.1.gb171cef.sles12sp3.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.sles12sp3.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
]]>Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
アップグレード中はネットワーク接続が停止し、完了後は再起動が必要になります。
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.40 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
]]>
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.40 | 20.14.0 | 1.5.01 | 20.14.6 | 214.0.166.0 |
]]>
HP Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン (SPPオフラインモードは特別なLinux OS環境を起動します。したがって、VMware Smartコンポーネントではなく、Linux Smartコンポーネントが使用します)：
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hp.com/go/spp
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
1.50
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
1.50
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
Problems Fixed:
Known Issues:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>hpssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
hpssaducli -ssdrpt -f ssd-report.zip
More options can be found by "hpssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HP Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of HPESSADUCLI on a system that has a
64-bit (x64) version of HPESSAADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
hpssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
hpssaducli -ssdrpt -f ssd-report.zip
More options can be found by "hpssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HP Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of HPESSADUCLI on a system that has a
64-bit (x64) version of HPESSAADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
Smart Update Managerを使用するにはService Pack for ProLiantから以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant :
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
ソフトウェアリリース11.2以降は、Fibre Channel(LightPulse)アダプターおよび Converged Networkアダプター(OneConnect)に独立したソフトウェアキットが用意されています。
この変更について詳しくは、『Broadcom Software Kit Migration User Guide(Broadcomソフトウェアキット移行ユーザーガイド)』をお読みいただくことをお勧めします。
ガイドを入手するには:
このドキュメントには、FCおよびCNAアダプター用のドライバーキットを使用するための特別な手順および考慮事項が記載されています。
特別ケースでは、11.2よりも前のドライバー(オリジナル)ドライバーおよびアプリケーションが新規11.2ドライバーおよびアプリケーションに置き換えられています。また、inboxドライバーが新規11.2 out-of-box(OOB)ドライバーに置き換えられています。
SuSE Linux Enterprise Server 12サービスパック3にEmulexファイバーチャネルドライバーをインストールする場合は、ユーザーが利用可能な最新のErrataカーネルをインストールする必要があります。そうしないと、ドライバーがインストールを完了せず、依存関係メッセージをスローします
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
For Emulex Fibre Channel Driver installation on SuSE Linux Enterprise Server 12 service pack 3 requires user to install latest Errata Kernel available, otherwise the driver may not complete the installation and throw dependency messages
]]>2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh elx-lpfc-
例：# rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4.インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e elx-lpfc-
SuSE Linux Enterprise Server 12サービスパック3にEmulexファイバーチャネルドライバーをインストールする場合は、ユーザーが利用可能な最新のErrataカーネルをインストールする必要があります。そうしないと、ドライバーがインストールを完了せず、依存関係メッセージをスローします
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4.When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
For Emulex Fibre Channel Driver installation on SuSE Linux Enterprise Server 12 service pack 3 requires user to install latest Errata Kernel available, otherwise the driver may not complete the installation and throw dependency messages
]]>Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login.
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HPE SSA.
When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded.
To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login.
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HPE SSA.
When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded.
To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
注: Microsoft kb #2031031について(https://support.microsoft.com/en-us/kb/2931031)、 ユーザーはUSBインストールが終わるまではUSBを削除したり、取り外したりすることはできません。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
Known Issues:
Problems Fixed:
Known Issues:
1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) がインストールおよび実行されている必要があります。
ESXi 5.1、5.5、ESXi 6.0およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.1の最小CRUバージョンは5.0.3.9です。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、5.5および5.1用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>5.1の最小CRUバージョンは5.0.3.9です。
5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注記：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
リモートオンライン、コンポーネントはSUMでサポートされますが、まだSPPの一部ではありません:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
To install or upgrade the driver type:
# rpm -Uvh kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
Additional Information:
]]>
Additional Information:
]]>
| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version | Combo Image Version |
| HPE Synergy 6810C 25/50Gb Ethernet Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.34 |
| HPE Synergy 4820C 10/20/25Gb Converged Network Adapter | ||||
| HPE Ethernet 10Gb 2-port 521T Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.29 |
| HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter | ||||
| HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter | ||||
| HPE StoreFabric CN1200R-T Converged Network Adapter | ||||
| HPE StoreFabric CN1300R Converged Network Adapter |
]]>
| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version | Combo Image Version |
| HPE Synergy 6810C 25/50Gb Ethernet Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.34 |
| HPE Synergy 4820C 10/20/25Gb Converged Network Adapter | ||||
| HPE Ethernet 10Gb 2-port 521T Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.29 |
| HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter | ||||
| HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter | ||||
| HPE StoreFabric CN1200R-T Converged Network Adapter | ||||
| HPE StoreFabric CN1300R Converged Network Adapter |
]]>
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>
1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注記：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
http://www.hpe.com/storage/spock/
Smart SAN機能を有効にする場合、この有効化キットのコンポーネントの前にHPEで指定されたファイバーチャネル ドライバーをインストールしなければなりません。 ドライバーは、HPE.comのウェブサイトwww.hpe.comで利用できます。
HPE Storageファイバーチャネルアダプターキットfor x64 Emulex Storportドライバーv11.1.145.16 cp030886.exe
ただし、Smart SAN が有効なドライバーが実行時にインストールされていない場合、ドライバーをインストールした後に、将来の使用のためにコンポーネントのイネーブルメントキットファイルを取得します。
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
HPE Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver v11.1.145.16 cp030886.exe
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>構成コンポーネントの詳細については、http://www.hpe.com/support/HP_SUM_UG_enの『Smart Update Manager User Guide（Smart Update Managerユーザーガイド）』を参照してください。
ProLiant の HPE サービス パックの外部コンポーネントの実行:
Smartコンポーネントをハードディスクドライブにダウンロードし、そのディレクトリに移動します。ダウンロードしたファイルは、Smartコンポーネント番号に基づくファイル名を持つ、自己解凍型の実行ファイルです。
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>For detailed information about configurable components, see the Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG2(B):
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG2(B):
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPS4(C):
Problems Fixed:
Problems Fixed for HPS4 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPS4 (E):
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPS4(C):
Problems Fixed:
Problems Fixed for HPS4 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPS4 (E):
Known Issues:
None
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 2.6.32-696.el6 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u9.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u9.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 2.6.32-696.el6 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u9.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u9.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
Smart SAN機能を有効にする場合、この有効化キットのコンポーネントの前にHPEで指定されたファイバーチャネル ドライバーをインストールしなければなりません。 ドライバーは、HPE.comのウェブサイトwww.hpe.comで利用できます。
Linux FCドライバーキットfor HPE Branded Emulex FC HBAおよびメザニンカード、バージョン11.1.183.21、for RedHat 6、RedHat 7、Novell SUSE 11およびSUSE 12
ただし、Smart SAN が有効なドライバーが実行時にインストールされていない場合、ドライバーをインストールした後に、将来の使用のためにコンポーネントのイネーブルメントキットファイルを取得します。
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Linux FC Driver Kit for HPE Branded Emulex FC HBAs and mezz cards, version 11.1.183.21, for RedHat 6, RedHat 7, and Novell SUSE 11, SUSE 12
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
# rpm -e hpe-emulex-smartsan-enablement-
これは構成可能コンポーネントです。 Smart SAN 機能を有効/無効にするための構成ファイルが必要です。 構成を実行できない場合、Smart SANの現状が記載され、実行が完了します。 それ以上の処置は不要です。
構成コンポーネントについての詳細は、http://www.hpe.com/support/HP_SUM_UG_jaで提供されているHP Smart Update Managerユーザーガイドを参照してください。
ProLiant の HPE サービス パックの外部コンポーネントの実行:
1. システム管理者 (root) としてログインします。
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. インストールするには、プロンプトで以下のコマンドを入力してください：
# rpm -ivh hpe-emulex-smartsan-enablement-kit-
例：# rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.x86_64.rpm
4. インストールまたはアップグレードが完了した場合、以下のメッセージが表示されます：
Installation complete
]]>
# rpm -e hpe-emulex-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
［インストール］ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Service Pack for ProLiant(SPP)から入手可能なWindows用のiLO 5 Channel Interface Driver(CHIF)。
]]>The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
リリースバージョンおよび/または日付：
HPG1
最新の推奨またはクリティカルバージョン：
HPG1
前のファームウェアバージョン：
なし。
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None.
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 214.0.202.0 | 214.0.203.0 | 214.0.181.0 | 214.0.182.0 | 214.0.166.0 | 214.0.182.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 214.0.202.0 | 214.0.203.0 | 214.0.181.0 | 214.0.182.0 | 214.0.166.0 | 214.0.182.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter |
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
リリースバージョンおよび/または日付:
1.51
最新の推奨またはクリティカルバージョン：
1.00(C)
前のファームウェアバージョン：
NA
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
1.51
Last Recommended or Critical Version:
1.00(C)
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (D):
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Problems Fixed for HPG4 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG4 (F):
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (D):
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Problems Fixed for HPG4 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG4 (F):
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Last Recommended or Critical Version:
6.88
Previous Version of Firmware:
6.60
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Last Recommended or Critical Version:
6.88
Previous Version of Firmware:
6.60
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
HP Smart Update Managerを使用するには、HPE Service Pack for ProLiantから以下の手順に従ってください:
]]>
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン (SPPオフラインモードは特別なLinux OS環境を起動します。したがって、VMware Smartコンポーネントではなく、Linux Smartコンポーネントが使用されます)：
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
最新の推奨またはクリティカルバージョン：
1.98
前のファームウェアバージョン：
なし
ファームウェアの関連性：
なし
改善点/新しい機能：
修正された問題点：
既知の問題点：
なし
Last Recommended or Critical Version:
1.98
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
マネジメントインターフェイスドライバーがサーバーに必ずインストールされていなければなりません。
HPONCFG GUIを起動するには、Microsoft .Net Framework 2.0以降が必要です。
]]>The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>Componentを、ご使用のハードドライブの一時ディレクトリ内のディレクトリに置きます。ダブルクリックして実行します。
インストールボタンをクリックし、サーバーにユーティリティをインストールします。再起動は必要ありません。
ユーティリティは、HewlettPackardEnterprise\HPONCFG\ディレクトリの下にあるprogram filesにインストールされます
ユーティリティのグラフィカルインターフェイス用のショートカットが、スタートメニュー >プログラム > HPEシステムツール > HP Lights-Outオンライン構成ユーティリティに提供されます。
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HP Lights-Out Online Configuration Utility".
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
To update the driver using VMware tools:
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54 (B)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54 (B)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>構成コンポーネントについての詳細は、http://www.hpe.com/support/HP_SUM_UG_jaで提供されているHP Smart Update Managerユーザーガイドを参照してください。
ProLiant の HPE サービスパックの外部コンポーネントの実行:
Smartコンポーネントをハードディスクドライブにダウンロードし、そのディレクトリに移動します。ダウンロードしたファイルは、Smartコンポーネント番号に基づくファイル名を持つ、自己解凍型の実行ファイルです。
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
インストールボタンをクリックして、インストールを開始します。
]]>For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
アップグレード中はネットワーク接続が停止し、完了後は再起動が必要になります。
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | ブートコードバージョン | PXEバージョン | UEFIバージョン | iSCSIバージョン | FCoEバージョン | CCMバージョン | L2バージョン |
| HP Ethernet 10Gb 2ポート530SFP+アダプター HP Ethernet 10Gb 2ポート530Tアダプター |
7.15.56 | 7.14.13 | 8.3.3 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2ポート533FLR-Tアダプター |
7.15.56 | 7.14.13 | 8.3.3 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
Smartコンポーネントをハードディスクドライブにダウンロードし、そのディレクトリに移動します。ダウンロードしたファイルは、Smartコンポーネント番号に基づくファイル名を持つ、自己解凍型の実行ファイルです。
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。ユーティリティは自動的にインストールされます。
インストールが完了したら、コマンドプロンプト環境を実行し、%programfiles%\MR Storage Administrator\StorCLI\binフォルダーに移動し、Storcli64.exeユーティリティを実行します
例：Storcli64.exe /c0 show
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Fixes Addressed a sustained write performance by improving the efficiency of background tasks. - Addressed a rare occurrence of a data loss issue during a sudden power event. - Addressed a rare occurrence of a Data Management Error after an interface reset when the device's Software Setting Prevention (SSP) is disabled.
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Fixes Addressed a sustained write performance by improving the efficiency of background tasks. - Addressed a rare occurrence of a data loss issue during a sudden power event. - Addressed a rare occurrence of a Data Management Error after an interface reset when the device's Software Setting Prevention (SSP) is disabled.
Known Issues:
None
警告！ このユニットの機能が失われる可能性があるので、ファームウェアのアップデート中は電源を切ったり再起動したりしないでください。通常ファームウェアをロードするのに数分かかります。
注： ディスクエンクロージャーがカスケードされたとき、1つのエンクロージャーのI/OモジュールAは、その後のエンクロージャーのI/OモジュールAに接続されます。ファームウェアのアップデート中、カスケードされたディスクエンクロージャー内のI/OモジュールAは、自動的にアップデートされます。
デュアルドメイン構成で、ターゲットディスクエンクロージャーとカスケードディスクエンクロージャーのI/Oモジュールは、ファームウェアインストール処理の間、自動的にアップデートされます。
すべてのファームウェアフラッシュ進行メッセージは、%systemdrive%\CPQSYSTEM\Log\D2000.logに記録され、フラッシュの要約は、%systemdrive%\CPQSYSTEM\Log\cpqsetup.logに記録されます。
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: When disk enclosures are cascaded, I/O module A of one enclosure is connected to I/O module A of the subsequent enclosure. During a firmware update, I/O module A in the cascaded disk enclosures is automatically updated.
In dual-domain configurations, both I/O modules of the target disk enclosure and cascaded disk enclosures are automatically updated during the firmware installation process.
All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\D2000.log and flash summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.
]]>GUIオプション：
CLIオプション：
次のコマンドを入力して、Smartコンポーネントを実行します： CP0xxxxx.exe /s
HP Service Pack for ProLiant からHP Smart Update Managerを使用するには、以下の手順に従ってください。 :
注: バンドエンクロージャーフラッシュのオプション：
パラメーター 説明
-----------------------------------------------------------------------------
/h,/? コマンドラインの使用方法のヘルプを表示します(ダイアログボックス)
/s ユーザーの操作なしでインストールします
/sを使用すると以下のコマンドが適用されます：
/f 最新である場合、ダウングレードまたは再インストールできます
シングルドメイン環境での特別なインストール手順
シングルドメインの構成では、I/OモジュールA（上側のモジュール）は、Smartアレイコントローラーに接続し、I/OモジュールB（下側のモジュール）は使用されません。たとえ下側のI/Oモジュールが使われない場合でも、両方のモジュールは同じファームウェアバージョンがインストールされていなければなりません。必ず両方のI/Oモジュールがアップデートされるように、以下を実行してください。
インストールノートおよびベストプラクティス
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Special installation instructions for single-domain environments:
In a single domain configuration, I/O module A (top module) is connected to a SmartArray controller and I/O module B (bottom module) is unused. Even though the bottom I/O module is unused, both modules must have the same firmware version installed. Do the following to make sure that BOTH I/O modules are updated:
Installation Notes and Best Practices:
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner
]]>Updating firmware with rpm installed:
# ./ CP037723.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-nvmebackplane-gen10-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
# ./ CP037723.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-nvmebackplane-gen10-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
To update the driver using VMware tools:
To update the driver using VMware tools:
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：https://www.hpe.com/servers/spp
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
必要に応じてシステムを再起動し、ファームウェアのアップデートを有効にします。
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
In conjunction with the Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HPE BladeSystem c-Class Virtual Connect module.
Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HPE BladeSystem c-Class Virtual Connect modules.
Installation Notes for using the component with Smart Update Manager and SPP
Installation Notes for using the firmware extracted from the component
Extract the firmware binary out of the component.
Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Virtual Connect module.
Start the Virtual Connect Support Utility and deploy the firmware.
HPE requires using the HPE BladeSystem c-Class Virtual Connect Support Utility version 1.14.0 (or higher) to install the HPE VC FlexFabric-20/40 F8 version 4.75, HPE VC Flex-10/10D version 4.75, HPE VC FlexFabric 10Gb/24-port version 4.75, HPE VC Flex-10 10Gb version 4.75, HPE VC 8Gb 24-Port FC version 4.15, HPE VC 16Gb 24-Port FC version 4.15, and HPE VC 8Gb 20-Port FC version 2.20 firmware. Please read the HPE BladeSystem c-Class Virtual Connect Support Utility release notes.
Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.75 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.50 and then upgrade from VC 4.50 to VC 4.75 in a Multi-Enclosure setup.
To update HPE VC 8Gb 24-Port FC module(s) from Virtual Connect firmware 4.31 or lower to Virtual Connect 4.75 or higher, these module(s) must first be updated with either Virtual Connect firmware version 4.4x or version 4.50 (Recommended version is 4.50) before they can be updated with Virtual Connect 4.75 or higher.
The USB Key Utility is used to copy the SPP onto a portable USB key storage device. Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.
Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.
]]>In conjunction with the Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HPE BladeSystem c-Class Virtual Connect module.
Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HPE BladeSystem c-Class Virtual Connect modules.
Installation Notes for using the component with Smart Update Manager and SPP
Installation Notes for using the firmware extracted from the component
Extract the firmware binary out of the component.
Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Virtual Connect module.
Start the Virtual Connect Support Utility and deploy the firmware.
HPE requires using the HPE BladeSystem c-Class Virtual Connect Support Utility version 1.14.0 (or higher) to install the HPE VC FlexFabric-20/40 F8 version 4.75, HPE VC Flex-10/10D version 4.75, HPE VC FlexFabric 10Gb/24-port version 4.75, HPE VC Flex-10 10Gb version 4.75, HPE VC 8Gb 24-Port FC version 4.15, HPE VC 16Gb 24-Port FC version 4.15, and HPE VC 8Gb 20-Port FC version 2.20 firmware. Please read the HPE BladeSystem c-Class Virtual Connect Support Utility release notes.
Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.75 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.50 and then upgrade from VC 4.50 to VC 4.75 in a Multi-Enclosure setup.
To update HPE VC 8Gb 24-Port FC module(s) from Virtual Connect firmware 4.31 or lower to Virtual Connect 4.75 or higher, these module(s) must first be updated with either Virtual Connect firmware version 4.4x or version 4.50 (Recommended version is 4.50) before they can be updated with Virtual Connect 4.75 or higher.
The USB Key Utility is used to copy the SPP onto a portable USB key storage device. Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.
Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
リリースバージョンおよび/または日付:
1.51
最新の推奨またはクリティカルバージョン：
1.00
前のファームウェアバージョン：
NA
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
1.51
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 12 SP4.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 12 SP4.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
localhost OSの例:
ilorest flashfwpkg
remote example:
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Updating firmware with rpm installed:
# ./ CP039413.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-112204add8-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
# ./ CP039413.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-112204add8-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54(B)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54(B)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
To update the driver using VMware tools:
To update the driver using VMware tools:
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.15.56 | 7.14.13 | 8.3.3 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
インストールボタンをクリックしてドライバーインストールを実行します。]]>
Click the "Install" button to perform the driver installation.]]>
hp-snmp-agentsに関連するすべてのファイルの一覧を取得するには、次のようにタイプします。
rpm -qp --requires hp-snmp-agents-<version>.rpm
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-snmp-agents-<version>.rpm
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-snmp-agents status
以下のコマンドを実行してヘルプを参照してください。
man hp-snmp-agents
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]># esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]># esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
リリースバージョンおよび/または日付:
1.3.2.215
最新の推奨またはクリティカルバージョン：
1.3.2.215
前のファームウェアバージョン：
1.3.2.212
ファームウェアの関連性：
なし
改善点/新しい機能：
なし。
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
1.3.2.215
Last Recommended or Critical Version:
1.3.2.215
Previous Version of Firmware:
1.3.2.212
Firmware Dependency:
None
Enhancements/New Features:
None.
Problems Fixed:
Known Issues:
None
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.24.1000 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.24.1000 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.24.1000 | HPE0000000008 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.24.1000 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.24.1000 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.24.1000 | HPE0000000008 |
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
マネジメントインターフェイスドライバーおよびマネジメントエージェントはサーバーに必ずインストールされていなければなりません。
iLO 5の場合は、上記のパッケージに加え、openssl v1.0.x以降が必要です。
opensslを手動でコンパイルおよびインストールしたり、意図的に/usr/bin/opensslに再配置している場合は、PATH環境変数を設定し、正しい/意図したopensslにHPONCFGをダイレクトする必要があります。
The management interface driver and management agents must be installed on the server.
For iLO 5, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
Hponcfgユーティリティの以前のバージョンをインストールしている場合は、削除しておかないと、このパッケージをインストールできません。パッケージの以前のバージョンを削除するには、次のように入力します：
パッケージをインストールするには、次のようにタイプします。
インストール後は、/sbinディレクトリにhponcfgの実行可能ファイルが見つかります。
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD2 (B)
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD2 (B)
Problems Fixed:
Known Issues:
None
]]>
Integrated Lights-Out 5（iLO 5）ファームウェアバージョン1.15およびシステムROMバージョン1.20以降。
]]>Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM version 1.20 or later.
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するために[インストール]ボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
このコンポーネントは、Windows x64上でのみ実行できます。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
chmod +x CPXXXXXX.vmexe
chmod +x CPXXXXXX.vmexe
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
iLOユーザーインターフェイス、ユーティリティ、またはスクリプティングインターフェイス経由でアップデートするためのファームウェアイメージを取得するには：
Linuxオペレーティングシステムを実行しているクライアントにSCEXEファイルをダウンロードします。 Execute: sh CP0xxxxx.scexe --unpack=directory
このコマンドにより、ユーザーの指定した「ディレクトリ」にilo4_1XX.binが解凍されます。ディレクトリが存在しない場合は、unpackerにより作成が施行されいます。
Firmware Maintenance CDのHPE Smart Update Managerを使用するには：
HPE USB Key Utilityを使用して、Firmware Maintenance CDをUSBキーに格納します。
CP0xxxxx.scexeをUSBキーの/compaq/swpackagesディレクトリにコピーします。
HPE Smart Update Managerの手順に従って、ファームウェアのアップデートを完了します。
To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
Download the SCEXE file to a client running a Linux operating system. Execute: sh CP0xxxxx.scexe --unpack=directory
This command will unpack the ilo4_1XX.bin into a user specified "directory". If the directory does not exist, the unpacker will attempt to create it.
To use HPE Smart Update Manager on the Firmware Maintenance CD:
Place the Firmware Maintenance CD on a USB key using the HPE USB Key Creator Utility.
Copy CP0xxxxx.scexe to /compaq/swpackages directory on the USB Key.
Follow HPE Smart Update Manager steps to complete firmware update.
iLO 4ユーザーガイドおよびLights-Outスクリプティングガイドは、以下のリンクから入手可能です。
http://www.hpe.com/info/ilo
ご使用のLights-Out製品、サポートドキュメント、ドキュメントの順に選択します。
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
# rpm -Uvh hpdsa-kmp-
Setup is now complete. Please REBOOT your computer NOW!!
注記：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e hpdsa-kmp-
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
To install or upgrade the driver type:
# rpm -Uvh hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpdsa-kmp-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
When upgrading firmware, refer to Revision History and upgrade it to the following version as stepping up the ladder until the version needed.
]]>When upgrading firmware, refer to Revision History and upgrade it to the following version as stepping up the ladder until the version needed.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
インストール ボタンをクリックしてドライバー インストールを実行します。]]>
Click the "Install" button to perform the driver installation.]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4(B):
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4(B):
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.5" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 3.10.0-957.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.rhel7u6.x86_64.rpm mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.rhel7u6.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.5" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 3.10.0-957.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.rhel7u6.x86_64.rpm mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.rhel7u6.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
警告！ このユニットの機能が失われる可能性があるので、ファームウェアのアップデート中は電源を切ったり再起動したりしないでください。通常ファームウェアをロードするのに数分かかります。
注記：すべてのファームウェアフラッシュ進行メッセージは、/var/cpq/D6020.logに記録され、フラッシュの要約は、/var/cpq/Component.logに記録されます。
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
http://www.hpe.com/storage/spock/
OOBドライバーは、http://www.hpe.com/servers/spp/downloadのService Pack for ProLiant（SPP）から入手できます。
]]>http://www.hpe.com/storage/spock/
The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
標準のLinuxカーネルに含まれているLinux用“iLO 5 Channel Interface Driver”(CHIF)。
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
This firmware contains a change to prevent a drive reset issue, which may affect performance.
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
This firmware contains a change to prevent a drive reset issue, which may affect performance.
Known Issues:
None
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed for HPG1 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG1 (E):
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed for HPG1 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG1 (E):
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
◾ None
Problems Fixed:
New servo which prevents the drive from posting non-media errors.
A fix to prevent the drive from becoming unresponsive during certain mixed read/write random workloads.
Known Issues:
None
Enhancements/New Features:
◾ None
Problems Fixed:
New servo which prevents the drive from posting non-media errors.
A fix to prevent the drive from becoming unresponsive during certain mixed read/write random workloads.
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
To update the driver using VMware tools:
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
オフライン：
リモートオンライン：
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Offline:
Remote Online:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
iLO 4ユーザーガイドおよびLights-Outスクリプティングガイドは、以下のリンクから入手可能です。
http://www.hpe.com/info/ilo
ご使用のLights-Out製品、サポートドキュメント、ドキュメントの順に選択します。
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>アップデートを直ちに有効にするにはシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISOを使用して実行できます。
オプション1：
オプション2：
このメカニズムは、複数のサーバーに対する更新を実行するためにiLOによってスクリプト化できることに注意してください。
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version | Combo Image Version |
| HPE Synergy 6810C 25/50Gb Ethernet Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.34 |
| HPE Synergy 4820C 10/20/25Gb Converged Network Adapter | ||||
| HPE Ethernet 10Gb 2-port 521T Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.29 |
| HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter | ||||
| HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter | ||||
| HPE StoreFabric CN1200R-T Converged Network Adapter | ||||
| HPE StoreFabric CN1300R Converged Network Adapter |
]]>
| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version | Combo Image Version |
| HPE Synergy 6810C 25/50Gb Ethernet Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.34 |
| HPE Synergy 4820C 10/20/25Gb Converged Network Adapter | ||||
| HPE Ethernet 10Gb 2-port 521T Adapter | 8.37.15.0 | 4.1.6.12 | 2.0.18 | 8.37.29 |
| HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter | ||||
| HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter | ||||
| HPE StoreFabric CN1200R-T Converged Network Adapter | ||||
| HPE StoreFabric CN1300R Converged Network Adapter |
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Release Version and/or Date:
15.10.10.00 (C)
Last Recommended or Critical Version:
15.10.10.00 (D)
Previous Version of Firmware:
15.10.10.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
15.10.10.00 (C)
Last Recommended or Critical Version:
15.10.10.00 (D)
Previous Version of Firmware:
15.10.10.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
注： Microsoft kb #2031031について(https://support.microsoft.com/en-us/kb/2931031), ユーザーはUSB インストールが終わるまではUSBを削除したり、取り外したりすることはできません。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Enhancements/New Features for HPS8(C):
Problems Fixed:
Problems Fixed for HPS8 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPS8 (E):
Known Issues:
None
Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Enhancements/New Features for HPS8(C):
Problems Fixed:
Problems Fixed for HPS8 (B):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPS8 (E):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
インストールボタンをクリックしてドライバーインストールを実行します。]]>
Click the "Install" button to perform the driver installation.]]>
# rpm -e hp-fc-enablement-
ベンダー固有のイネーブルメントRPMをインストールするには以下のコマンドを使用します。
# rpm -ivh HP-CNA_FC-hpqlgc-enablement-
このバージョンのイネーブルメントキットは、以前のバージョンが行ったようなRAMディスクの再構築またはドライバーパラメーターの設定といった追加の機能を提供しません。これらの機能を実行する方法については、Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guideの「Additional setup」セクションを参照してください。リファレンスガイドは、次のリンクから入手可能です：
http://www.hpe.com/storage/spock/
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the vendor specific enablement RPM use the following command:
# rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
注：SUMを使用してファームウェアをアップデートしている間に、レビューページの"View Devices"オプションが、アダプター名のリストにありません。これは予測される動作で、コンポーネントの機能に影響を与えません。
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
vSphereクライアントにログインします
インベントリツリーのサーバーまたはクラスターを選択します
HPE Insight Managementタブをクリックします
Insight Control for VMware vCenterの指示に従ってSmartコンポーネントを使いファームウェアのアップデートを行います
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
ESXiホストでSSHを有効にします。
rootとしてログインします。（アップデートを適用するにはrootとしてログインする必要があります）
Smartコンポーネントを一時ディレクトリに置きます
nmstモジュールがすでにロードされているかどうかチェックします: vmkload_mod -l | grep nmst
モジュールがロードされていない場合、次のコマンドを使用してモジュールをロードします: vmkload_mod nmst
同じディレクトリからSmartコンポーネントを実行します。例：unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Smartコンポーネントの指示に従います。
ログアウトします。
ESXiホストでSSHを無効にします。
必要に応じてシステムを再起動し、ファームウェアのアップデートを有効にします。
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware changes some settings to comply with Microsoft Storage Spaces Certification requirements.
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
2.08
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
2.08
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン (SPPオフラインモードは特別なLinux OS環境を起動します。したがって、VMware Smartコンポーネントではなく、Linux Smartコンポーネントが使用します)：
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.78 (A)
Last Recommended or Critical Version:
1.78
Previous Version of Firmware:
1.50(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (B):
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (B):
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
• Added support for RHEL8.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
• Added support for RHEL8.
Problems Fixed:
Known Issues:
None
注：SUMを使用してファームウェアをアップデートしている間に、レビューページの"View Devices"オプションが、アダプター名のリストにありません。これは予測される動作で、コンポーネントの機能に影響を与えません。
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
vSphereクライアントにログインします
インベントリツリーのサーバーまたはクラスターを選択します
HPE Insight Managementタブをクリックします
Insight Control for VMware vCenterの指示に従ってSmartコンポーネントを使いファームウェアのアップデートを行います
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
ESXiホストでSSHを有効にする
rootとしてログインします。（アップデートを適用するにはrootとしてログインする必要があります）
Smartコンポーネントを一時ディレクトリに置きます
nmstモジュールがすでにロードされているかどうかチェックします: vmkload_mod -l | grep nmst
モジュールがロードされていない場合、次のコマンドを使用してモジュールをロードします: vmkload_mod nmst
同じディレクトリからSmartコンポーネントを実行します。例：unzip CPXXXXX.zip; ./CPXXXXXX.vmexe
Smartコンポーネントの指示に従います。
ログアウトします。
ESXi ホストでSSHを無効にします。
必要に応じてシステムを再起動し、ファームウェアのアップデートを有効にします。
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Installation Notes for using the component as a stand alone component
This smart component is a self-extracting executable. The smart component unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
cpxxxxxx.exe /target <netAddress> /user <username> /passwd <password> [/s[ilent]] [/f[orce]] [/logdir <path>]
where cpxxxxxx.exe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are :
Installation Notes for using the component with HPE Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
Installation Notes for using the component as a stand alone component
This smart component is a self-extracting executable. The smart component unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
cpxxxxxx.exe /target <netAddress> /user <username> /passwd <password> [/s[ilent]] [/f[orce]] [/logdir <path>]
where cpxxxxxx.exe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are :
Installation Notes for using the component with HPE Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.90
Previous Version of Firmware
Version 4.85
Firmware Dependency
For firmware compatibility information,see the HPEService Pack for ProLiant Information Libraryat:
https://www.hpe.com/servers/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HPE Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HPE ProLiant BL servers. (When using HPE SUM to create the custom ISO image, select Firmware as the Component Type, and select HPE ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HPE BladeSystem Onboard Administrator User Guide. More HPE SUM information can be found via HPE Smart Update Manager online help or at the HPE Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.71 is FIPS certified as referenced in the 140-2 In Process list located at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140InProcess.pdf.
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.90
Previous Version of Firmware
Version 4.85
Firmware Dependency
For firmware compatibility information,see the HPEService Pack for ProLiant Information Libraryat:
https://www.hpe.com/servers/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HPE Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HPE ProLiant BL servers. (When using HPE SUM to create the custom ISO image, select Firmware as the Component Type, and select HPE ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HPE BladeSystem Onboard Administrator User Guide. More HPE SUM information can be found via HPE Smart Update Manager online help or at the HPE Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.71 is FIPS certified as referenced in the 140-2 In Process list located at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140InProcess.pdf.
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン:
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
]]>
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>SUSE Linux Enterprise Server 15にHPE Broadcom RoCEライブラリをインストールまたは更新するときは、--forceまたは--replacefilesオプションを使用します。
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 15.
]]>Smartコンポーネントをハードディスクドライブにダウンロードし、そのディレクトリに移動します。ダウンロードしたファイルは、Smartコンポーネント番号に基づくファイル名を持つ、自己解凍型の実行ファイルです。
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。ユーティリティは自動的にインストールされます。
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
N/A
Previous Version of Firmware:
N/A
Firmware Dependency:
None
Enhancements/NewFeatures :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
N/A
Previous Version of Firmware:
N/A
Firmware Dependency:
None
Enhancements/NewFeatures :
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
リリースバージョンおよび/または日付:
HPG1
最新の推奨またはクリティカルバージョン：
HPG1
前のファームウェアバージョン：
N/A
ファームウェアの関連性：
なし
修正された問題点：
既知の問題点：
なし
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
N/A
Firmware Dependency:
None
Problems Fixed:
Known Issues:
None
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Offline:
SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at:www.hp.com/go/spp
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 7.3 Errata 3.10.0.514.6.1
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 7.3 Errata 3.10.0.514.6.1
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
ターゲットサーバー上のLinuxオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
rpmインストールによるファームウェアのアップデート:
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]>For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL8.
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL8.
Problems Fixed:
None
Known Issues:
None
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、および5.5用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, and 5.5 on vibsdepot.hpe.com.
]]>
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するにはService Pack for ProLiantから以下の手順に従ってください：
]]>
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Last Recommended or Critical Version:
6.88
Previous Version of Firmware:
6.60(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Last Recommended or Critical Version:
6.88
Previous Version of Firmware:
6.60(B)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]> 注記: iLO
HighSecurity、FIPS、CNSA セキュリティ状態をサポートするには、アップデートされたユーティリティとシステムライブラリが必要です。現在、HPONCFG Windows ユーティリティ
では、CNSA セキュリティ状態がサポートされていません。
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
iLOユーザーインターフェイス、ユーティリティ、またはスクリプティングインターフェイス経由でアップデートするためのファームウェアイメージを取得するには:
Linuxオペレーティングシステムを実行しているクライアントにSCEXEファイルをダウンロードします。 Execute: sh CP0xxxxx.scexe --unpack=directory
このコマンドにより、ユーザーの指定した"ディレクトリ"にilo5_XXX.binが解凍されます。ディレクトリが存在しない場合は、unpackerにより作成が施行されいます。
Firmware Maintenance CDのHP Smart Update Managerを使用するには:
USB Key Utilityを使用して、Firmware Maintenance CDをUSBキーに格納します。
CP0xxxxx.scexeをUSBキーの/compaq/swpackagesディレクトリにコピーします。
HP Smart Update Managerの指示に従ってファームウェアのアップデートを行います。
To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
Download the SCEXE file to a client running a Linux operating system. Execute: sh CP0xxxxx.scexe --unpack=directory
This command will unpack the ilo5_XXX.bin into a user specified "directory". If the directory does not exist, the unpacker will attempt to create it.
To use HP Smart Update Manager on the Firmware Maintenance CD:
Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
Copy CP0xxxxx.scexe to /compaq/swpackages directory on the USB Key.
Follow HP Smart Update Manager steps to complete firmware update.
また、『iLO 5ユーザーガイド』および『Lights-Outスクリプティングガイド』も下記のリンクから入手できます:
http://www.hpe.com/info/ilo
ご使用のLights-Out製品、サポート&ドキュメント、ドキュメントの順に選択します。
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
localhost OSの例:
ilorest flashfwpkg
remote example:
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, click the Start button and navigate to Programs/HPE System Tools/HPE Smart Storage Administrator CLI. This will run the CLI in a command prompt environment.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, click the Start button and navigate to Programs/HPE System Tools/HPE Smart Storage Administrator CLI. This will run the CLI in a command prompt environment.
]]>To enter the HPE SSA CLI console type: hpssacli
Commands can also be executed from outside the HPE SSA CLI console using the syntax: hpssacli
Type "hpssacli help" or type "help" at the CLI prompt for usage details.
]]>
To enter the HPE SSA CLI console type: hpssacli
Commands can also be executed from outside the HPE SSA CLI console using the syntax: hpssacli
Type "hpssacli help" or type "help" at the CLI prompt for usage details.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
~# esxcli software vib install -v=
~# esxcli software vib remove -n=<filename.vib>
]]>~# esxcli software vib install -v=<path><filename.vib> --no-sig-check
~# esxcli software vib remove -n=<filename.vib>
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。]]>
From that drive and directory, execute the downloaded file.]]>
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Integrated Lights-Out 5（iLO 5）ファームウェアバージョン1.15およびシステムROMバージョン1.20以降
]]>Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM version 1.20 or later
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
Update the firmware and software in the usual manner.
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Fixes Addressed a sustained write performance by improving the efficiency of background tasks. - Addressed a rare occurrence of a data loss issue during a sudden power event. - Addressed a rare occurrence of a Data Management Error after an interface reset when the device's Software Setting Prevention (SSP) is disabled.
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Fixes Addressed a sustained write performance by improving the efficiency of background tasks. - Addressed a rare occurrence of a data loss issue during a sudden power event. - Addressed a rare occurrence of a Data Management Error after an interface reset when the device's Software Setting Prevention (SSP) is disabled.
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (D):
Problems Fixed:
Problems Fixed for HPG4 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG4 (F):
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (D):
Problems Fixed:
Problems Fixed for HPG4 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG4 (F):
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.5 Host Using vSphere CLI 6.5 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.5 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.5 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.5, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.5 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.5 Host Using vSphere CLI 6.5 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.5 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.5 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.5, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.5 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) がインストールおよび実行されている必要があります。
ESXi 5.5、ESXi 6.0、およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、および5.5用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5 on vibsdepot.hpe.com.
]]>5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for RHEL8.
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
ターゲットサーバー上のLinuxオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
rpmのインストールなしでのファームウェアのアップデート
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。
このパッケージのリモートデプロイメントには、最新のバージョンのService Pack for ProLiant（SPP）を入手して、以下の手順を実行することをおすすめします。
To update firmware from Linux operating system on target server:
Updating firmware without installing the rpm
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system.
HP recommends for remote deployment of this package that you obtain the most recent version of the Service Pack for ProLiant (SPP) and follow these steps:
Enhancements/New Features for FW version 4.3.6.0 (B):
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features for FW version 4.3.6.0 (B):
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するために[インストール]ボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISO上に見られるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
このコンポーネントは、Windows x64上でのみ実行できます。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
]]>そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
IF the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
IF the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するにはService Pack for ProLiantから以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant :
Release Version and/or Date:
2.00 (B)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
2.00 (B)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
To update firmware from VMware ESXi operating system on target server:
rpmのインストールなしでのファームウェアのアップデート：
Updating firmware without installing rpm:
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.24.1000 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.24.1000 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.24.1000 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.24.1000 | HPE0000000022 |
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
http://www.hpe.com/storage/spock/
展開のためにHPE SUMによりこのファームウェアコンポーネントが識別される前に、SUMが供給するQLogicドライバーをインストールする必要があります。OOBドライバーは、 http://www.hpe.com/servers/spp/download/ のService Pack for ProLiant（SPP）から入手できます。
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
HPK3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
HPK3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 2.6.32-753.el6 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u10.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u10.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using kernel version 2.6.32-753.el6 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u10.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.0.1.3.1.gb171cef.rhel6u10.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Updating firmware with rpm installed:
Updating firmware without installing rpm:
Updating firmware with rpm installed:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Infiniband FDR 2P 545FLR-QSFP Adapter | 10.16.1038 | HP_02C0110019 |
| HPE Infiniband FDR 2-port 545QSFP Adapter | 10.16.1038 | HP_02B0110019 |
| HPE Infiniband FDR 2P 545M Adapter | 10.16.1058 | HP_02A0110019 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Infiniband FDR 2P 545FLR-QSFP Adapter | 10.16.1038 | HP_02C0110019 |
| HPE Infiniband FDR 2-port 545QSFP Adapter | 10.16.1038 | HP_02B0110019 |
| HPE Infiniband FDR 2P 545M Adapter | 10.16.1058 | HP_02A0110019 |
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
A minor reliability enhancement involving an extra head cleaning operation.
Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
A minor reliability enhancement involving an extra head cleaning operation.
Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
This firmware allows the drive to meet the requirements for Azure Stack certification.
This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label. Any removed characters are replaced with blank place holders so the log format will not be changed.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-ams-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-ams status
以下のコマンドを実行してヘルプを参照してください。
man hp-ams
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>HP iLO 4が、SNMPに、net-snmpユーティリティがインストールされたLinuxシステムから通信していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
サーバー上でHP AMSが動作していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>iLO 5 v1.20 or later
]]>iLO 5 v1.20 or later
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
標準のLinuxカーネルに含まれているLinux用“iLO 5 Channel Interface Driver”(CHIF)。
]]>The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>
]]>
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.5" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.12.14-94.41-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.5_k4.12.14_94.41-OFED.4.5.1.0.1.1.gb4fdfac.sles12sp4.x86_64.rpm mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.sles12sp4.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.5" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.12.14-94.41-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.5_k4.12.14_94.41-OFED.4.5.1.0.1.1.gb4fdfac.sles12sp4.x86_64.rpm mlnx-ofa_kernel-4.5-OFED.4.5.1.0.1.1.gb4fdfac.sles12sp4.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
リリースバージョンおよび/または日付：
HPGB
最新の推奨またはクリティカルバージョン：
HPGB
前のファームウェアバージョン：
HPG8
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
部分的にプログラムされたブロックによる4K読み込み時にのみ誘発される、NAND内のリードディスターブメカニズムの問題を修正しました。読み取りの影響を回避するため、NAND読み取り時間が変更されました。この変更は、ドライブの早期故障や疑似故障を防止します。
ファームウェアダウンロードプロセスの悪用不可能な脆弱性の修正。修正されたFWによってセキュリティが増強され、アップデートを受け取るすべてのSSDが、問題のある以前のFWをダウンロードできなくなります。 以前のバージョンのファームウェアに回帰できなくなります。
既知の問題点：
なし
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Enhancements/New Features for HPDB (B):
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Enhancements/New Features:
Enhancements/New Features for HPDB (B):
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
ターゲットサーバー上のWindowsオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
4.22
Last Recommended or Critical Version:
4.21(B)
Previous Version of Firmware:
4.21
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.0 Host Using vSphere CLI 6.0 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.0 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.0, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.0 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.0 Host Using vSphere CLI 6.0 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.0 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.0, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.0 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>SUSE Linux Enterprise Server 12 SP3にHPE Broadcom RoCEライブラリをインストールまたは更新するときは、--forceまたは--replacefilesオプションを使用します。
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 12 SP3.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISO上のSmart Update Manager 8.0.0以降を使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager 8.0.0 or later, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、および5.5用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, and 5.5 on vibsdepot.hpe.com.
]]>
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
インストールボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
アップグレード中はネットワーク接続が停止し、完了後は再起動が必要になります。
追加情報：
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
| NIC | EEPROM/NVMバージョン | OROMバージョン | シングルNVMバージョン |
|---|---|---|---|
| HP Ethernet 1Gb 2ポート 361iアダプター | 80000CD5 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2ポート 361Tアダプター | 80000F91 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2ポート 363iアダプター | 80000D00 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i通信ボード | 80000EBF | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート366iアダプター | 80000E24 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート 366FLRアダプター | 80000F44 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4ポート 366Tアダプター | 80000E81 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2ポート368iアダプター | 80001669 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2ポート368FLR-MMTアダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4ポート369iアダプター | 8000166A | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560FLBアダプター | 800008F0 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560FLR-SFP+ アダプター | 80000838 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2ポート 560M アダプター | 8000083D | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート560SFP+アダプター | 80000835 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568iアダプター | 8000166B | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568FLR-MMSFP+アダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート568FLR-MMTアダプター | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2ポート563iアダプター | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2ポート562FLR-SFP+アダプター | 80004005 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2ポート562FLR-Tアダプター | 80000D96 | 1.2028.0 | 10.4.4 |
| HPE Ethernet 10Gb 2ポート562SFP+アダプター | 80004004 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2ポート562Tアダプター | 80000D95 | 1.2028.0 | 10.4.4 |
| HPE Synergy 4610C 10/25Gb Ethernetアダプター | 800040F9 | 1.2028.0 | 10.4.7 |
コンボイメージv1.2028.0は以下を含みます：Boot Agent: 1GbE - v1.5.86、10GbE - v2.4.32、40GbE - v1.1.02 & UEFIドライバー：1GbE - v8.6.06、10GbE - v7.1.06、40GbE - v3.4.06
コンボイメージv1.1375.0は以下を含みます：Boot Agent: 1GbE - v1.5.72、10GbE - v2.3.46、40GbE - v1.0.21 &UEFIドライバー: 1GbE - v6.9.13、10GbE - v5.0.20、40GbE - v1.5.14
シングルNVMバージョンは、以前に使用されていたバージョンEEPROM/NVMまたはOROMバージョンの代わりに統合されたバージョンを表す新しいファームウェア形式です。
]]>| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version |
|---|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000F91 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000F44 | 1.2028.0 | N/A |
| HP Ethernet 1Gb 4-port 366T Adapter | 80000E81 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2-port 368i Adapter | 80001669 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 1Gb 4-port 369i Adapter | 8000166A | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008F0 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | 1.2028.0 | N/A |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568i Adapter | 8000166B | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter | 80001668 | 1.2028.0 | N/A |
| HPE Ethernet 10Gb 2-port 563i Adapter | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 80004005 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2-port 562FLR-T Adapter | 80000D96 | 1.2028.0 | 10.4.4 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 80004004 | 1.2028.0 | 10.4.3 |
| HPE Ethernet 10Gb 2-port 562T Adapter | 80000D95 | 1.2028.0 | 10.4.4 |
| HPE Synergy 4610C 10/25Gb Ethernet Adapter | 800040F9 | 1.2028.0 | 10.4.7 |
The combo image v1.2028.0 includes: Boot Agent: 1GbE - v1.5.86, 10GbE - v2.4.32, 40GbE - v1.1.02 & UEFI Drivers: 1GbE - v8.6.06, 10GbE - v7.1.06, 40GbE - v3.4.06
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
]]>[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Enhancements/New Features:
Problems Fixed:
None
VMware Toolsを使用してドライバーをアップデート：
To update the driver using VMware tools:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-11.2.xxx.x_3.0.76_0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5052 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5044 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5044 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-ams-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-ams status
以下のコマンドを実行してヘルプを参照してください。
man hp-ams
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>net-snmpユーティリティがインストールされたLinuxシステムからHP iLO 4がSNMPと対話していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
サーバー上でHP AMSが動作していることを確認：
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのSupplementalアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d8000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d8000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
rpmインストールによるファームウェアのアップデート：
# ./CP0xxxxx.scexe ('/usr/lib/x86_64-linux-gnu/hp-scexe-compat'で実行) (または)
# ./setup（'/usr/lib/x86_64-linux-gnu/firmware-d3000-
注記：
バンドエンクロージャーフラッシュのオプション
| -d、--discover |
XMLフォーマットの検出情報を |
| -e、--reflash | デバイスが最新でもフラッシュします |
| -f、--force | 適用されるデバイスを常にフラッシュします（-e -gと同じ） |
| -g、--downgrade | デバイスが最新のファームウェアでもフラッシュします |
| -s、--silent | テキストを表示しないため、ユーザーの操作は不要です |
HP Service Pack for ProLiant（SPP）からSmart Update Manager（SUM）を使用するには、以下の手順に従ってください。
オフライン：
オンライン：
このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d3000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (B):
Enhancements/New Featuresfor HPG4 (C):
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (B):
Enhancements/New Featuresfor HPG4 (C):
Problems Fixed:
Known Issues:
hp-snmp-agentsに関連するすべてのファイルの一覧を取得するには、次のように入力します:
rpm –qp –-requires hp-snmp-agents-
To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>パッケージをインストールするには、次のようにタイプします。
rpm -ivh hp-snmp-agents-
パッケージが正しくロードされているか、以下をタイプして確認します。
/etc/init.d/hp-snmp-agents status
以下のコマンドを実行してヘルプを参照してください。
man hp-snmp-agents
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
注：HPE System Insight Managerサポートが必要な場合は、OSがインストールを完了してシステムが再起動した後で、ProLiant用の最新のサービスパックおよび
OSがインストレーションプロセスを完了し、システムがリブートした後で、lsi-mpt2sas-kmp-X.X.X.X-X.sles12spN.x86_64.rpmをインストールします。
Note: If HPE System Insight Manager support is required, install the latest Service Pack for ProLiant and
lsi-mpt2sas-kmp-X.X.X.X-X.sles12spN.x86_64.rpm after the OS has completed its installation process and system has rebooted.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
ターゲットサーバー上のWindowsオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
HP Smart Update Managerを使用するには、 Service Pack for ProLiant:から以下の手順に従ってください
]]>
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant
]]>
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
1.50
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
2.50
Last Recommended or Critical Version:
2.08
Previous Version of Firmware:
1.50
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant :
Windows:
Windows:
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SuSE Linux Enterprise Server 15
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SuSE Linux Enterprise Server 15
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>
In addition, the System Management Homepage (SMH) component (version 7.2.2.9 or later) is required for a single server web-based user interface.
Make sure to apply all updates needed for the OS on the system by running Windows Update. Incomplete Windows Update may cause the HPE WBEM Providers installation failures.
]]>
In addition, the System Management Homepage (SMH) component (version 7.2.2.9 or later) is required for a single server web-based user interface.
Make sure to apply all updates needed for the OS on the system by running Windows Update. Incomplete Windows Update may cause the HPE WBEM Providers installation failures.
]]>
]]>
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
注記ESXi6.0を使用するには、アップグレード3以降である必要があります。以前のバージョンのOSには必要なSmartPQIドライバーがありません。
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
]]>
NOTE: When using ESXi6.0 you must be at upgrade 3 or newer. The required SmartPQI driver is not present in earlier versions of the OS
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Release Version and/or Date:
2.00 (C)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
2.00 (C)
Last Recommended or Critical Version:
2.00
Previous Version of Firmware:
2.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 8
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 8
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware includes a fix for slow performance during sequential write workloads with small queue depth.
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>また、シングル サーバーWebベースユーザーインターフェイスのためにSystem Management Homepage（SMH）コンポーネントが必要です。
]]>
In addition, the System Management Homepage (SMH) component is required for a single server web-based user interface.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。]]>
From that drive and directory, execute the downloaded file.]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
None.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
None.
Problems Fixed:
Known Issues:
None
Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 12
依存性の確認に失敗しました。
現在のバージョン：iLOx x.xx
必要な最小バージョン：iLO4 2.20
必要なハードウェアがシステムに存在しないかソフトウェア/ファームウェアがこのシステムに適用しないため、ソフトウェアはこのシステムにインストールされません。
]]>Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 12
Check dependency failed.
Current version: iLOx x.xx
Minimum version required: iLO4 2.20
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.
]]>To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
http://www.hpe.com/storage/spock/
このファームウェアコンポーネントが展開のためにSUMで識別される前に、HPEで提供しているイネーブルメントキットをインストールする必要があります。
OOBドライバーおよびイネーブルメントキットは、http://www.hpe.com/servers/spp/downloadのService Pack for ProLiant（SPP）から入手できます。
]]>http://www.hpe.com/storage/spock/
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
The OOB driver and enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>注記：フラッシュ操作中に、「No Adapter Found!」というメッセージが ログに表示されることがあります。これらのメッセージは、ファームウェアフラッシュ操作の問題を示していないため、無視してかまいません。
]]>NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
]]>1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles11sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。]]>
From that drive and directory, execute the downloaded file.]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPS8
Last Recommended or Critical Version:
HPS8
Previous Version of Firmware:
HPS6
Firmware Dependency:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for Windows Server 2019.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
◾Added support for Windows Server 2019.
Problems Fixed:
Known Issues:
None
To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
Enhancements/New Features:
Problems Fixed:
Known Issues:
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
警告！ このユニットの機能が失われる可能性があるので、ファームウェアのアップデート中は電源を切ったり再起動したりしないでください。通常ファームウェアをロードするのに数分かかります。
注記：すべてのファームウェアフラッシュ進行メッセージは、/var/cpq/D6020.logに記録され、フラッシュの要約は、/var/cpq/Component.logに記録されます。
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d6020-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d6020-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
セットアップが完了したらコンピュータをリブートする必要があります。
注: HPE System Insight Managerのサポートが必要な場合、OSのインストールが完了してシステムがリブートした後で、ProLiant用の最新のサービスパックとkmod-mpt2sas-X.X.X.X-X.rhel7uN.x86_64.rpmをインストールします。
]]>A REBOOT is required for your computer when the setup is complete.
Note: If HPE System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7uN.x86_64.rpm after the OS has completed its installation process and system has rebooted.
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant :
Release Version and/or Date:
15.10.10.00 (E)
Last Recommended or Critical Version:
15.10.10.00 (D)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
15.10.10.00 (E)
Last Recommended or Critical Version:
15.10.10.00 (D)
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
HPE 3PAR HostExplorer smart component will be installed only if the host has connectivity to HPE 3PAR StoreServ.
]]>HPE 3PAR HostExplorer smart component will be installed only if the host has connectivity to HPE 3PAR StoreServ.
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
1.56(D)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(D)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
“Setup is unable to load a setup DLL”
Check dependency failed.
Current version: iLOx x.xx
Minimum version required: iLO4 2.20
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.
]]>“Setup is unable to load a setup DLL”
Check dependency failed.
Current version: iLOx x.xx
Minimum version required: iLO4 2.20
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.
]]>ターゲットサーバー上のWindowsオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
]]>
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SuSE Linux Enterprise Server 12 SP2
amsd only supported on HPE Gen10 Servers.
amsd provides information to the iLO 5 service providing SNMP support.
SNMP PASS-THRU on the iLO 5 MUST be disabled, and SNMP should be configured on the iLO 5. The iLO 5 may need to be reset after changing these settings.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SuSE Linux Enterprise Server 12 SP2
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed.
Known Issues:
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK4
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed.
Known Issues:
]]>リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) がインストールおよび実行されている必要があります。
ESXi 5.1、5.5、ESXi 6.0およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.1の最小CRUバージョンは5.0.3.9です。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、5.5および5.1用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>
1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.
]]>
5.1の最小CRUバージョンは5.0.3.9です。
5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注記：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
# rpm -Uvh kmod-hpsa-
Setup is now complete. Please REBOOT your computer NOW!!
注：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e kmod-hpsa-
Enterprise Support
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
# rpm -Uvh kmod-hpsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.12.14-23-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.4_k4.12.14_23-OFED.4.4.1.0.0.1.gd647238.sles15sp0.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.1.0.0.1.gd647238.sles15sp0.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-4.4" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.
To install or upgrade the driver:
If using 4.12.14-23-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-4.4_k4.12.14_23-OFED.4.4.1.0.0.1.gd647238.sles15sp0.x86_64.rpm mlnx-ofa_kernel-4.4-OFED.4.4.1.0.0.1.gd647238.sles15sp0.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features for HPG2 (B):
Problems Fixed:
Known Issues:
None
Enhancements/New Features for HPG2 (B):
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISO上のSmart Update Manager 8.0.0以降を使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager 8.0.0 or later, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
IF the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
IF the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:
#esxcli software vib remove lpfc
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>インストールボタンをクリックしてドライバーインストールを実行します。]]>
Click the "Install" button to perform the driver installation.]]>
http://www.hpe.com/storage/spock/
展開のためにHPE SUMによりこのファームウェアコンポーネントが識別される前に、SUMが供給するQLogicドライバーをインストールする必要があります。OOBドライバーは、 http://www.hpe.com/servers/spp/download/ のService Pack for ProLiant（SPP）から入手できます。
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
HPE Insight Control for vCenterを使用するには、以下の手順に従ってください:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
This firmware fixes an infrequent drive internal reset issue. When managing a Task Set Full condition in its firmware the drive may do an internal reset. The drive may not be accessible during the reset recovery process..
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware fixes an infrequent drive internal reset issue. When managing a Task Set Full condition in its firmware the drive may do an internal reset. The drive may not be accessible during the reset recovery process..
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください：
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D8000.log and flash summary is logged to /var/cpq/Component.log.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D8000.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
警告！ このユニットの機能が失われる可能性があるので、ファームウェアのアップデート中は電源を切ったり再起動したりしないでください。通常ファームウェアをロードするのに数分かかります。
注： ディスクエンクロージャーがカスケードされたとき、1つのエンクロージャーのI/OモジュールAは、その後のエンクロージャーのI/OモジュールAに接続されます。ファームウェアのアップデート中、カスケードされたディスクエンクロージャー内のI/OモジュールAは、自動的にアップデートされます。
デュアルドメイン構成で、ターゲットディスクエンクロージャーとカスケードディスクエンクロージャーのI/Oモジュールは、ファームウェアインストール処理の間、自動的にアップデートされます。
すべてのファームウェアフラッシュの進捗メッセージは、/var/cpq/Component.logに記録されます。
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: When disk enclosures are cascaded, I/O module A of one enclosure is connected to I/O module A of the subsequent enclosure. During a firmware update, I/O module A in the cascaded disk enclosures is automatically updated.
In dual-domain configurations, both I/O modules of the target disk enclosure and cascaded disk enclosures are automatically updated during the firmware installation process.
All firmware flash progress messages are logged to /var/cpq/Component.log.
]]>rpmインストールによるファームウェアのアップデート：
# ./CP0xxxxx.scexe ('/usr/lib/x86_64-linux-gnu/hp-scexe-compat'で実行) (または)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-d2700-
HP Smart Update Managerを使用するには、HP Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
シングルドメイン環境での特別なインストール手順
シングルドメインの構成では、I/OモジュールA（上側のモジュール）は、Smartアレイコントローラーに接続し、I/OモジュールB（下側のモジュール）は使用されません。たとえ下側のI/Oモジュールが使われない場合でも、両方のモジュールは同じファームウェアバージョンがインストールされていなければなりません。必ず両方のI/Oモジュールがアップデートされるように、以下を実行してください。
注:
インストールノートおよびベストプラクティス
Updating firmware with rpm installed:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-d2600-d2700-<version>-*' location
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Special installation instructions for single-domain environments:
In a single domain configuration, I/O module A (top module) is connected to a SmartArray controller and I/O module B (bottom module) is unused. Even though the bottom I/O module is unused, both modules must have the same firmware version installed. Do the following to make sure that BOTH I/O modules are updated:
NOTES:
Installation Notes and Best Practices:
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
On RedHat Enterprise Linux 6 perl has to be install in \bin path to make sure there are no dependencies for the installation.
]]>On RedHat Enterprise Linux 6 perl has to be install in \bin path to make sure there are no dependencies for the installation.
]]>リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
Remote Online:
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
ターゲットサーバー上のWindowsオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
このパッケージのリモートデプロイメントには、最新のバージョンのHP Service Pack for ProLiant（SPP）を入手して、以下の手順を実行することをおすすめします。
To update firmware from Windows operating system on target server:
HP recommends for remote deployment of this package that you obtain the most recent version of the Service Pack for ProLiant (SPP) and follow these steps:
Enhancements/New Features for FW version 4.3.6.0 (C):
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features for FW version 4.3.6.0 (C):
Problems Fixed:
None
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
Update the firmware and software in the usual manner.
]]>
セットアップが完了したらコンピューターをリブートする必要があります。
]]>A REBOOT is required for your computer when the setup is complete.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>ドライバーをインストールまたはアップグレードするには次のようにタイプします。
# rpm -Uvh Kmod-hpdsa-
Setup is now complete. Please REBOOT your computer NOW!!
注：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e Kmod-hpdsa-
Enterprise Support
エンタープライズサポートSmartアレイコントローラーのサポートに関しては http://www.hpe.com/supportを参照してください。
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
http://www.hpe.com/storage/spock/
The OOB NIC driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex FCoE Enablement Kit be installed. The drivers and enablement kit are also available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]>http://www.hpe.com/storage/spock/
The OOB NIC driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex FCoE Enablement Kit be installed. The drivers and enablement kit are also available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]> 2. cd to the appropriate location for your system, and update the firmware by executing ./.setup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command: rpm -e <rpm_package_name>.
2. cd to the appropriate location for your system, and update the firmware by executing ./.setup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command: rpm -e <rpm_package_name>.
http://www.hpe.com/storage/spock/
Smart SAN機能を有効にする場合、この有効化キットのコンポーネントの前にHPEで指定されたファイバーチャネル ドライバーをインストールしなければなりません。 ドライバーは、HPE.comのウェブサイトwww.hpe.comで利用できます。
Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FCドライバーキットfor HPE Qlogic CNA、HBAおよびメザニンHBA、バージ8.07.00.42.06.0-k1
Red Hat Enterprise Linux 7 Server FCoE/FCドライバーキットfor HPE QLogic CNA、HBAおよびメザニンHBAおよびCNAバージョン8.07.00.42.07.0-k1
SUSE Linux Enterprise Server 11 (AMD64/EM64T) FCoE/FCドライバーキットfor HPE Qlogic CNA、HBAおよびメザニンHBA、バージョン8.07.00.42.11.3-k
SUSE Linux Enterprise Server 12 FCoE/FCドライバーキットfor HPE QLogic CNA、HBAおよびメザニンHBAおよびCNAバージョン 8.07.00.42.12.0-k1
ただし、Smart SAN が有効なドライバーが実行時にインストールされていない場合、ドライバーをインストールした後に、将来の使用のためにコンポーネントのイネーブルメントキットファイルを取得します。
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.42.06.0-k1
Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.42.07.0-k1
SUSE Linux Enterprise Server 11 (AMD64/EM64T) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.42.11.3-k
SUSE Linux Enterprise Server 12 FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs version 8.07.00.42.12.0-k1
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
# rpm -e hpe-qlogic-smartsan-enablement-
これは構成可能コンポーネントです。 Smart SAN 機能を有効/無効にするための構成ファイルが必要です。 構成を実行できない場合、Smart SANの現状が記載され、実行が完了します。 それ以上の処置は不要です。
構成コンポーネントの詳細については、http://www.hpe.com/support/HP_SUM_UG_enの『Smart Update Manager User Guide（Smart Update Managerユーザーガイド）』を参照してください。
ProLiant の HPE サービスパックの外部コンポーネントの実行:
1. システム管理者 (root) としてログインします。
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. インストールするには、プロンプトで以下のコマンドを入力してください：
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-
例：# rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. インストールまたはアップグレードが完了した場合、以下のメッセージが表示されます：
Installation complete
# rpm -e hpe-qlogic-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
Problems Fixed:
Added FW binary unencrypted.
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. “HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) をインストールされて稼動している必要があります。
ESXi 5.5、ESXi 6.0、およびESXi 6.5の最小iLOバージョンは1.4です。 ESXi 6.7の最小iLOバージョンは10.1.0です。
2. “Compaq ROM Utility Driver” (CRU) をインストールされて稼動している必要があります。
ESXi 5.5の最小CRUバージョンは5.5.4.1です。
ESXi 6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
両方のドライバーがHPE VMware Custom Imageに統合されます。これは他のHPEの高度な管理ツールにも含まれます。 ドライバーは、vibsdepot.hpe.comのVMware vSphere 6.7、6.5、6.0、および5.5用のOS固有の“HPE Agentless Management Service Offline Bundle”からも入手できます。
]]>1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.5 and ESXi 6.0 and ESXi 6.5 is 1.4. The minimum iLO version for ESXi 6.7 is 10.1.0.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.7, 6.5, 6.0, 5.5 on vibsdepot.hpe.com.
]]>5.5の最小CRUバージョンは5.5.4.1です。
6.0の最小CRUバージョンは6.0.8です。
6.5の最小CRUバージョンは6.5.8です。
6.7の最小CRUバージョンは6.7.10です。
オフライン：
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.
The minimum CRU version for 6.7 is 6.7.10.
Offline:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
［インストール］ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online、コンポーネントがSUMでサポートされているが、まだSPPの一部ではない場合:
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
HP Smart Update Managerを使用するには HPE Service Pack for ProLiant :
]]>
To use HP Smart Update Manager from the HPE Service Pack for ProLiant :
]]>
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54(A)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
5.02
Last Recommended or Critical Version:
4.54(A)
Previous Version of Firmware:
4.10
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
Setup is now complete. Please REBOOT your computer NOW!!
注記：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
エンタープライズサポート
Smartアレイコントローラーのサポートに関しては、http://www.hpe.com/supportを参照してください。
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。]]>
From that drive and directory, execute the downloaded file.]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant :
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD5(B)
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD5(B)
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>セットアップが完了したらコンピュータをリブートする必要があります。
注：
A REBOOT is required for your computer when the setup is complete.
Notes:
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/server/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/server/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
警告！このユニットの機能が失われる可能性があるので、ファームウェアのアップデート中は電源を切ったり再起動したりしないでください。通常ファームウェアをロードするのに数分かかります。
注記：すべてのファームウェアフラッシュ進行メッセージは、/var/cpq/D3000.logに記録され、フラッシュの要約は、/var/cpq/Component.logに記録されます。
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D3000.log and flash summary is logged to /var/cpq/Component.log.
]]>注記：
バンドエンクロージャーフラッシュのオプション
| -d、--discover |
XMLフォーマットの検出情報を |
| -e、--reflash | デバイスが最新でもフラッシュします |
| -f、--force | 適用されるデバイスを常にフラッシュします（-e -gと同じ） |
| -g、--downgrade | デバイスが最新のファームウェアでもフラッシュします |
| -s、--silent | テキストを表示しないため、ユーザーの操作は不要です |
HP Service Pack for ProLiant（SPP）からSmart Update Manager（SUM）を使用するには、以下の手順に従ってください。
リモートオンライン：
このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISO上のSmart Update Manager 8.0.0以降を使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager 8.0.0 or later, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
1. コンポーネントをテンポラリディレクトリに置きます。
2. 同じディレクトリからダブルクリックしてコンポーネントを実行します。
3. コンポーネントダイアログウィンドウが表示されたら、ファームウェアアップグレードを実行するためにインストールボタンをクリックします。
4. アップデートをすぐに適用したい場合は、ご使用のシステムを再起動してください。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant ISOにあるSmart Update Managerから行うことができます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
◾ Added support for RHEL8.
Problems Fixed:
Known Issues:
None
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues(refer to Customer Bulletin for workarounds):
Enhancements/New Features:
Problems Fixed:
Known Issues(refer to Customer Bulletin for workarounds):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
Removes a vendor unique sense code that the controller does not handle properly.
Includes changes to eliminate the cause of a potential hang condition.
Known Issues:
None
Enhancements/New Features:
◾ Added support for Windows Server 2019.
Problems Fixed:
Removes a vendor unique sense code that the controller does not handle properly.
Includes changes to eliminate the cause of a potential hang condition.
Known Issues:
None
~# esxcli software vib install -v=
~# esxcli software vib remove -n=<filename.vib>
]]>~# esxcli software vib install -v=<path><filename.vib> --no-sig-check
~# esxcli software vib remove -n=<filename.vib>
]]>Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS4
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾NA.
Known Issues:
None
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
◾NA.
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください:http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
リモートオンライン：
VMware Toolsを使用してドライバーをアップデート：
]]>
Remote Online:
To update the driver using VMware tools:
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
This firmware fixes an infrequent drive internal reset issue. When managing a Task Set Full condition in its firmware the drive may do an internal reset. The drive may not be accessible during the reset recovery process.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware fixes an infrequent drive internal reset issue. When managing a Task Set Full condition in its firmware the drive may do an internal reset. The drive may not be accessible during the reset recovery process.
Known Issues:
None
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート:
追加情報:
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
インストールボタンをクリックして、インストールを開始してください。
]]>Click the Install button to proceed with the installation.
]]>| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.24.9006 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.24.9000 | HP_2420110034 |
| HPE Synergy 6410C 25/50Gb Ethernet Adapter (868779-B21) | 12.24.9000 | HPE0000000006 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.24.9000 | HPE0000000014 |
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features for HPG2 (D):
Problems Fixed:
Problems Fixed for HPG2 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG2 (F):
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
Enhancements/New Features for HPG2 (D):
Problems Fixed:
Problems Fixed for HPG2 (C):
When attempting to update drive firmware in a VMware vSphere 6.5 environment, the update would fail and the event was logged as a segmentation fault error.
Problems Fixed for HPG2 (F):
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.7 Host Using vSphere CLI 6.7 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.7 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.7 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.7, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.7 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>Extract iSUT bundle (sut-esxi6.*-bundle-*.zip) from cp*.zip
Installing Offline Bundles on an ESXi 6.7 Host Using vSphere CLI 6.7 esxcli Utility
You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.
Prerequisites
Before you can update or patch an vSphere 6.7 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 6.7 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 6.7, see the VMware vSphere Command-Line Interface Guides.
Procedure
Installing Offline Bundles on an vSphere 6.7 Host Using VMware vCenter Update Manager
The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
Enhancements/New Features:
Problems Fixed:
Known Issues:
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
［インストール］ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (B):
Enhancements/New Featuresfor HPG4 (C):
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Featuresfor HPG4 (B):
Enhancements/New Featuresfor HPG4 (C):
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
[インストール]ボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール（rpm -ivh）は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
オフライン：
オンライン：
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
HPK1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware corrects the potential for a drive to become disabled and nonfunctional during certain conditions or workloads.After the drive is upgraded to firmware version HPK1, it cannot be downgraded to firmware version HPK0.
Known Issues:
Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
HPK1
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware corrects the potential for a drive to become disabled and nonfunctional during certain conditions or workloads.After the drive is upgraded to firmware version HPK1, it cannot be downgraded to firmware version HPK0.
Known Issues:
リモートオンライン：
詳細な手順については、以下にアクセスしてSPPドキュメントを参照してください：http://www.hpe.com/info/spp/documentation
HP Insight Control for vCenterを使用するには、以下の手順に従ってください。
ターゲットサーバー上のVMware ESXiオペレーティングシステムからファームウェアをアップデートするには、以下の手順に従ってください。
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
リリースバージョンおよび/または日付：
HPGB
最新の推奨またはクリティカルバージョン：
HPGB
前のファームウェアバージョン：
HPG8
ファームウェアの関連性：
なし
改善点/新しい機能：
なし
修正された問題点：
部分的にプログラムされたブロックによる4K読み込み時にのみ誘発される、NAND内のリードディスターブメカニズムの問題を修正しました。読み取りの影響を回避するため、NAND読み取り時間が変更されました。この変更は、ドライブの早期故障や疑似故障を防止します。
ファームウェアダウンロードプロセスの悪用不可能な脆弱性の修正。修正されたFWによってセキュリティが増強され、アップデートを受け取るすべてのSSDが、問題のある以前のFWをダウンロードできなくなります。 以前のバージョンのファームウェアに回帰できなくなります。
既知の問題点：
なし
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Fixed issue to a read-disturb mechanism within the NAND induced only during 4K reads with partially programed blocks. The NAND read time is modified to prevent the impact of the reads. This change prevents premature or false failure of the drive.
Fix to a non-exploitable vulnerability in the firmware download process. Corrected FW will increment the security version to ensure that all SSDs receiving the update will not be capable of downloading previous FW with the issue. Regression back to an earlier version of firmware will not be possible.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>通常の手順でファームウェアおよびソフトウェアをアップデートします。
]]>Update the firmware and software in the usual manner.
]]>Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
リリースバージョンおよび/または日付:
1.00(B)
最新の推奨またはクリティカルバージョン：
1.00
前のファームウェアバージョン：
1.00
ファームウェアの関連性：
なし
改善点/新しい機能：
修正された問題点：
なし
既知の問題点：
なし
Release Version and/or Date:
1.00(B)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features for :
Problems Fixed:
Known Issues:
None
Enhancements/New Features for :
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
ドライバーをインストールまたはアップグレードするには次のようにタイプします。
# rpm -Uvh kmod-hpdsa-
Setup is now complete. Please REBOOT your computer NOW!!
注：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e kmod-hpdsa-
Enterprise Support
エンタープライズサポートSmartアレイコントローラーのサポートに関しては http://www.hpe.com/supportを参照してください。
To install or upgrade the driver type:
# rpm -Uvh kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpdsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
Smart Update Managerを使用するには Service Pack for ProLiant から以下の手順に従ってください:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
rpmのインストールによりファームウェアをアップデート：
rpmのインストールなしでのファームウェアのアップデート：
追加情報：
ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。 単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。
Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください：
オフライン：
オンライン:
画面の指示に従います。
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.24.1000 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.24.1000 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.24.1000 | HPE0000000008 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.24.1000 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.24.1000 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.24.1000 | HPE0000000008 |
http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>http://www.hpe.com/storage/spock/
Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.
It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.
To obtain the guide:
This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.
Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None