- Changed version to 11.2 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.4 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 12.0 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.2 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.4 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 12.0 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.2 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.4 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 12.0 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.2 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 11.4 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version to 12.0 - Updated libbrcmdfc library - Updated libbrcmemsdm library - Updated libbrcmhbaapi library - Changed version number to 6.4.12.3 - Fixed Bug 148456: Updated the spec file to use ldconfig -X - Changed version to 10.7 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 7.2, SLES12 SP1 - Changed version to 11.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 11.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.0 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1 - Removed support for SLES 11 SP3 and SLES 11 SP4 - Changed version to 12.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 12 SP5 - Removed support for RHEL 6 - Changed version to 12.6 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 and SLES 12 SP3 - Changed version to 12.8 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP3 - Changed version number to 6.4.12.3 - Fixed Bug 148456: Updated the spec file to use ldconfig -X - Changed version to 10.7 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 7.2, SLES12 SP1 - Changed version to 11.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 11.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.0 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1 - Removed support for SLES 11 SP3 and SLES 11 SP4 - Changed version to 12.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 12 SP5 - Removed support for RHEL 6 - Changed version to 12.6 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 and SLES 12 SP3 - Changed version to 12.8 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP3 - Changed version number to 6.4.12.3 - Fixed Bug 148456: Updated the spec file to use ldconfig -X - Changed version to 10.7 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 7.2, SLES12 SP1 - Changed version to 11.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 11.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.0 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1 - Removed support for SLES 11 SP3 and SLES 11 SP4 - Changed version to 12.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 12 SP5 - Removed support for RHEL 6 - Changed version to 12.6 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 and SLES 12 SP3 - Changed version to 12.8 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP3 - Changed version number to 6.4.12.3 - Fixed Bug 148456: Updated the spec file to use ldconfig -X - Changed version to 10.7 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 7.2, SLES12 SP1 - Changed version to 11.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 11.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.0 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1 - Removed support for SLES 11 SP3 and SLES 11 SP4 - Changed version to 12.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 12 SP5 - Removed support for RHEL 6 - Changed version to 12.6 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 and SLES 12 SP3 - Changed version to 12.8 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP3 - Changed version number to 6.4.12.3 - Fixed Bug 148456: Updated the spec file to use ldconfig -X - Changed version to 10.7 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 7.2, SLES12 SP1 - Changed version to 11.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 11.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.0 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Changed version to 12.2 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1 - Removed support for SLES 11 SP3 and SLES 11 SP4 - Changed version to 12.4 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 12 SP5 - Removed support for RHEL 6 - Changed version to 12.6 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 and SLES 12 SP3 - Changed version to 12.8 - Updated libdfc library - Updated libemsdm library - Updated libemulexhbaapi library - Added support for SLES 15 SP3 Enablement Kit Version: 6.0.0.0-7 --------------------------------- v6.04 build41: ------------- Defect/Enhancement: Defect Problem: BSG interface fails if /tmp is mounted with tmpfs on shared memory Solution: Use /var/cache/sdmapi for BSG device creation Introduced: v6.04 build1 Impact: HW: All adapters OS: All supported Linux flavors Protocol: FC, FCoE Enablement Kit Version: 6.0.0.0-8 --------------------------------- v6.04 build45: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Add NVRAM parameter to select FCP or NVME targets Introduced: v6.04 build45 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build44: ------------- Defect/Enhancement: Defect Problem: Apps issues seen with NVME target in RHEL Solution: Detect NVME target/luns by traversing sysfs tree Introduced: v6.04 build42 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build43: ------------- Defect/Enhancement: Defect Problem: Apps issues seen with NVME target in NPIV configuration Solution: Set deafult value of NVME targets for NPIV ports Introduced: v6.04 build42 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build42: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Add NVME target support for QLogic/Marvell Apps Introduced: v6.04 build42 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-9 --------------------------------- v6.04 build47: ------------- Defect/Enhancement: Defect Problem: Apps initialization delay seen with NPIV ports Solution: Allow reading active flash regions for NPIV ports Introduced: v6.04 build39 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build46: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Restrict application features for NVME targets Introduced: v6.04 build45 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-10 ---------------------------------- v6.04 build48: ------------- Defect/Enhancement: Defect Problem: NVME targets not seen when NVME Id and Subsys Id are different Solution: Identify NVME targets using subsys Id Introduced: v6.04 build42 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-11 ---------------------------------- v6.04 build49: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Allow SDGetActiveRegions API for 27xx based adapters Introduced: v6.04 build45 Impact: HW: ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-12 ---------------------------------- v6.04 build52: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Allow SCM stats for NVMe targets for Marvell/QLogic Apps Introduced: v6.04 build52 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Defect/Enhancement: Enhancement Problem: Modalias removal request from HPE Solution: Remove modalias support from Enablement kit rpm Introduced: Day One Impact: HW: All adapters OS: All supported Linux flavors Protocol: FC v6.04 build51: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Add additional SCM stats for FCP targets for Marvell/QLogic Apps Introduced: v6.04 build51 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Defect/Enhancement: Defect Problem: Corruption seen after flash update with some inbox drivers when BSG device creation fails Solution: Use /dev/bsg path to create BSG device creation Introduced: v6.00 build9 Impact: HW: All adapters OS: All supported Linux flavors Protocol: FC v6.04 build50: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Allow SCM stats for FCP targets for Marvell/QLogic Apps Introduced: v6.04 build50 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-13 ---------------------------------- v6.04 build55: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Added MPI Firmware Dump support Introduced: v6.04 build55 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61 OS: All supported Linux flavors Protocol: FC v6.04 build54: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Added Secure remote port info support Introduced: v6.04 build54 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build53: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Check driver for SCM stats support before reading SCM stats Introduced: v6.04 build53 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-14 ---------------------------------- v6.04 build56: ------------- Defect/Enhancement: Defect Problem: LUN QoS API returns "Not Supported" Solution: Fixed QoS value read issue in BSG path Introduced: v6.04 build21 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61, ISP2031 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-15 ---------------------------------- v6.04 build57: ------------- Defect/Enhancement: Defect Problem: Delay seen in Application bringup on some inbox drivers Solution: Do not perform retries for newer features if driver returns not supported error Introduced: v6.04 build28 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61 OS: All supported Linux flavors Protocol: FC Enablement Kit Version: 6.0.0.0-16 ---------------------------------- v6.04 build63: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Allow NVMe specific APIs for newer ISPs Introduced: v6.04 build63 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61 OS: All supported Linux flavors Protocol: FC v6.04 build62: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Added ISP FW and MPI FW lockdown bits Introduced: v6.04 build62 Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build61: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Provide lockdown mode error codes to apps Introduced: v6.04 build61 Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build60: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Added adapter firmware lockdown support Introduced: v6.04 build60 Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC v6.04 build59: ------------- Defect/Enhancement: Enhancement Problem: N/A Solution: Added EP2989 support Introduced: v6.04 build59 Impact: HW: EP2989 OS: All supported Linux flavors Protocol: FC v6.04 build58: ------------- Defect/Enhancement: Defect Problem: HBA Parameters read fails for newer adapters for inbox drivers Solution: Read active HBA Parameters region set from flash Introduced: v6.04 build24 Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 OS: All supported Linux flavors Protocol: FC - Initial Development - Initial Development - Initial Development - Initial Development - Initial Development - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - - - - - - - - - Changed version to 12.0 - Initial build - Changed version to 12.0 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Fixed QLogic port state output on RHEL 5.3 - Fixed discovery of HBAs in adapter_info on Integrity servers with multiple PCI busses - Initial release with Emulex CNA support - Fix for dependency check error seen when installing with HPSUM - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards - Corrected Link state display information for Qlogic Adapters - Added MSA G3 support in Scsi_info.h -Perl dependancy fix for RHEL8 -Initial support added for E4 and will get updated subsequently -Fixed adpater_info code to display correct Vendor name instead of Unknown -Removed Brocade HBAs support - Fixed QLogic port state output on RHEL 5.3 - Fixed discovery of HBAs in adapter_info on Integrity servers with multiple PCI busses - Initial release with Emulex CNA support - Fix for dependency check error seen when installing with HPSUM - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards - Corrected Link state display information for Qlogic Adapters - Added MSA G3 support in Scsi_info.h -Separated code stream for RHEL and SLES -Initial support added for E4 and will get updated subsequently -Fixed adpater_info code to display correct Vendor name instead of Unknown -Removed Brocade HBAs support - *Problems Fixed in version 15.10.07.00:** * Resolves POST error 'MPT BIOS Fault 13h'. If this error occurs, the system will not boot from any boot device attached to an HP H2xx Host Bus Adapter (HBA) and will be unable to access data on drives attached to the HP H2xx HBA. The fault is triggered if the link between the HP H2xx HBA and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD). - Customers who already installed firmware version 15.10.07.00 do not need to update to 15.10.07.00 (B). - *Problems Fixed in version 15.10.07.00:** * Resolves POST error 'MPT BIOS Fault 13h'. If this error occurs, the system will not boot from any boot device attached to an HP H2xx Host Bus Adapter (HBA) and will be unable to access data on drives attached to the HP H2xx HBA. The fault is triggered if the link between the HP H2xx HBA and the drives goes down during link tuning process. Updated firmware will no longer trigger this fault and the link is now allowed to re-establish itself. This issue is seen only with Solid State Drives (SSD). - Firmware Version 15.10.09.00 * Resolves a performance issue that was caused by a 90 msec timeout on all read/write operations when no Smart Carrier was present. This firmware reduces the read/write timeout to 2 msec. * Resolves a lockup issue during boot up on the HP ProLiant DL580 Gen8 Server when configured with the HP Host Bus Adapter H220 connected to SATA SSD or HDD drives. - Firmware Version 15.10.09.00 (B) * Improved integration with HP Smart Update Manager Firmware Version 15.10.09.00 * Resolves a performance issue that was caused by a 90 msec timeout on all read/write operations when no Smart Carrier was present. This firmware reduces the read/write timeout to 2 msec. * Resolves a lockup issue during boot up on the HP ProLiant DL580 Gen8 Server when configured with the HP Host Bus Adapter H220 connected to SATA SSD or HDD drives. - Added support for Gen9 servers. - *Problems Fixed in version 15.10.10.00:** * HPE ProLiant BL420c Gen8 server configured with HPE Dynamic Smart Array B320i RAID controllers, failed to boot and the system stopped responding during Power-On Self-Test (POST). In some instances, the message, "1783 Driver Array Controller Failure" was displayed. Please refer to HPE Customer Advisory [c05317927](http://h20566.www2.hpe.com/hpsc/doc/public/display?docId=c05317927) for details. - Supports H221 on Gen9 Servers. - Fixes an issue where the appropriate FW version for the Host Bus Adapter (HBA) Stockade (H2xx) driver will not install when using the Service Pack ProLiant (SPP) - - - - *The following fixes were incorporated in this version:** * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution. * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure. * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04. * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online. Please refer to the _[Release Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw- linux/p879663226/v177052/D3000_P07231-006.html) for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware. - *The following fixes were incorporated in this version:** * Temperature sensors logic inside gSEP model and SES database * When an IOM is pulled the surviving IOM reports false critical temperatures Please refer to the _[Release Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw- linux/p1194926978/v191364/D6020_v2.74I.html) for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware. - - - - - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5044:** * Fixed an issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode **Fixes in version 2.42.5052:** * Fixed Uncorrectable Machine Check Exception issue. The internal resources for handling packets were not allowed to be flushed when the driver was brought down and occasionally caused Red Screen of Death (RSOD). The fix was applied to the ROM code only and has only external timing influences upon the driver's teardown. - *Firmware for the following devices are updated to 2.42.5000:** 764282-B21 764286-B21 **Firmware for the following devices are updated to 2.42.5044:** 764284-B21 764285-B21 **Firmware for the following devices are updated to 2.42.5052:** 764283-B21 **New features in firmware version 2.42.5000:** * Added support for the following features. * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration. * User MAC configuration. * Automatically collecting mstdump before driver reset. * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert. * A new field is added to "set port" command which notifies the firmware what is the user_mtu size. * Improved the debug ability for command timeout cases **Smart Component Fixes:** * Mellanox Infiniband 544 NIC Interface Shows Incorrectly as PCI Bus:Dev.Funtion in Smart Update Manager(SUM) Report. - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5044:** * Fixed an issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode **Fixes in version 2.42.5052:** * Fixed Uncorrectable Machine Check Exception issue. The internal resources for handling packets were not allowed to be flushed when the driver was brought down and occasionally caused Red Screen of Death (RSOD). The fix was applied to the ROM code only and has only external timing influences upon the driver's teardown. - *Firmware for the following devices are updated to 2.42.5000:** 764282-B21 764286-B21 **Firmware for the following devices are updated to 2.42.5052:** 764283-B21 764284-B21 764285-B21 **New features in firmware version 2.42.5000:** * Added support for the following features. * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration. * User MAC configuration. * Automatically collecting mstdump before driver reset. * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert. * A new field is added to "set port" command which notifies the firmware what is the user_mtu size. * Improved the debug ability for command timeout cases - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5052:** * Fixed Uncorrectable Machine Check Exception issue. The internal resources for handling packets were not allowed to be flushed when the driver was brought down and occasionally caused Red Screen of Death (RSOD). The fix was applied to the ROM code only and has only external timing influences upon the driver's teardown. - *Firmware for the following devices are updated to 2.42.5000:** 764282-B21 764286-B21 **Firmware for the following devices are updated to 2.42.5056:** 764283-B21 764284-B21 764285-B21 **New features in firmware version 2.42.5000:** * Added support for the following features. * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration. * User MAC configuration. * Automatically collecting mstdump before driver reset. * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert. * A new field is added to "set port" command which notifies the firmware what is the user_mtu size. * Improved the debug ability for command timeout cases. - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5056:** * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device. - *Firmware for the following devices are updated to 2.42.5000:** 764282-B21 764286-B21 **Firmware for the following devices are updated to 2.42.5056:** 764283-B21 764284-B21 **Firmware for the following device is updated to 2.42.5700:** 764285-B21 **New features in firmware version 2.42.5000:** * Added support for the following features. * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration. * User MAC configuration. * Automatically collecting mstdump before driver reset. * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert. * A new field is added to "set port" command which notifies the firmware what is the user_mtu size. * Improved the debug ability for command timeout cases. **New features and changes in firmware version 2.42.5700.** * Modified the mlx_cmd_get_mlx_link_status command return value to return "Link Type = Ethernet" in Ethernet adapter cards. - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5056:** * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device. - *Fixes in version 2.42.5000:** * PortRcvPkts counter was prevented from being cleared after resetting it. * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec. * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error. * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot. * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck. * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed. * ibdump could not capture all MADs packets. * link did not go up after reboot. * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions. * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad. **Fixes in version 2.42.5056:** * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device. - HPK2 FW version addresses an issue observed in conjunction with RHEL 8.3 installation. - This Firmware release contains various drive interoperability enhancements and code fixes accumulated since the last firmware release, as well as a change to disable MCTP over PCIe VDM function per requested of HPE, and a PHY setting change for improved compatibility with Intel Ice Lake based Gen10+ DL360 platform. * For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00115201en_us - This Firmware release contains various drive interoperability enhancements and code fixes accumulated since the last firmware release, as well as a change to disable MCTP over PCIe VDM function per requested of HPE, and a PHY setting change for improved compatibility with Intel Ice Lake based Gen10+ DL360 platform. * For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00115201en_us - This firmware contains a change to prevent occasional command completion times in the 4-5 second window when command is received just as the drive is transitioning from active to Idle A. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Reliability enhancements and VENDOR IDENTIFICATION field change from "HP" to HPE". - - This firmware includes a fix for slow performance during sequential write workloads with small queue depth. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Firmware version HPG4 prevents the occurrence of a rare issue which could lead to slow drive performance. This issue has the potential to impact all drives in configurations where the drives might be allowed to be idle for greater than 1 second. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware includes a fix for slow performance during sequential write workloads with small queue depth. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware has a change that allows the drive to meet the requirements for Azure Stack certification. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware: Fixes the cause of internal reboots detected in the MSA system. Removes a vendor unique sense code that the controller does not handle properly. Includes changes to eliminate the cause of a potential hang condition. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a timeout error and improved performance. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This update includes a fix that prevents unrecoverable read errors in highly localized write intensive workload, and a new servo code revision that improves performance under specific vibration conditions. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL 8.3 - This firmware corrects the potential for a drive to become disabled and nonfunctional during certain conditions or workloads. * After the drive is upgraded to firmware version HPK1, it cannot be downgraded to firmware version HPK0. - This firmware corrects the potential for a drive to become disabled and nonfunctional during certain conditions or workloads. * After the drive is upgraded to firmware version HPK1, it cannot be downgraded to firmware version HPK0. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a timeout error and improved performance. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was only found during supplier ongoing reliability testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was only found during supplier ongoing reliability testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was only found during supplier ongoing reliability testing. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was only found during supplier ongoing reliability testing. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL 8.2 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - VENDOR IDENTIFICATION field change from "HP" to HPE". Support for second source PMIC from IDT. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Performance improvement on 512e format may become long latency due to DRAM management. * Servo code improvements to reduce possibility of drive hang. * Correction on boot sequence, controller code, sense code. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware includes a fix for slow performance during sequential write workloads with small queue depth. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - *Problems Fixed:** * HPK3 firmware resolved an issue that caused the disk activity ring, which is located on NVME SSD drive carrier, to constantly spin regardless of drive activity status. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.., - Added support for SLES15. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Added support for RHEL8. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Added support for SLES15SP1. - Added support for RHEL 8.2 - - Update MCTP base spec version from 1.2.0 to 1.3.0 * Change firmware to save the telemetry log buffer to smaller pages. * When reset happens, add to clear ready bit and other bits in health data according to MI 1.0a spec. - Improve overhead in handling of first packet to limit the incidence of NACKs due to lost byte from second packet. * Maintain Class Code value in a buffer area when link is down. Copy maintained Class Code from buffer to PCIe Config Space on link-up. * Change 'Percent Endurance Used' value reported in a Workload Log Page ( D6h ) to report actual endurance value. - Added support for RHEL 8.3 - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. - Added support for RHEL 8.3 - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. * The Idle Power Management fix to keep the drive from entering and exiting the Lower Power Idle mode too frequently. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00112800en_us - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. * The Idle Power Management fix to keep the drive from entering and exiting the Lower Power Idle mode too frequently. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00112800en_us - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - Added support for RHEL 8.4 and SLES15SP3. - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Fixed a rare occurrence of meta data not being saved during a sudden power loss. * Fixed an issue where a performance drop was occurring during a write same operation. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL 8.2 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Fixes a data integrity risk where a recoverable error can prevent a write command from completing properly. * Fixes a data integrity risk due to incorrect re-ordering of commands, when overlapped commands occur. * Fixes a data integrity risk during very large blocks of sequential commands with a data transfer between 1020MB and 1024MB. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware improves potential timeouts that could occur during the write error recovery process, for drives that have head contaminant build up. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Increased Queue Size from 32 to 128 to be equal to the max number of chips. * Refresh NM SRAM area periodically only when idle as a possible work around on NM SRAM parity error. * Change the error response as 0x3 (SP_Busy) or 0x07 ( NO_SESSION_AVAILABLE) when host attempts to open another session while a session is already opened. * Disable verify compare if APP_CHK=0 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL 8.3 - Modify Drive Vendor Identification String (VID) in Inquiry page from "HP" to "HPE". - - This Firmware release address below fixes and additional features: * FW Transfer Fix * Drive Failure Fix * Power Loss Protection * FW Download Fix * Reset Fix * Shutdown fix * PCIe Improvement * Random Write Improvement - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This update improves performance for random read workloads with delays between reads. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improvements to Product Quality and Reliability. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Firmware fixes intermittent data corruption issue associated with unaligned sequential write operations. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Firmware fixes intermittent data corruption issue associated with unaligned sequential write operations. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Firmware fixes intermittent data corruption issue associated with unaligned sequential write operations. - Firmware fixes intermittent data corruption issue associated with unaligned sequential write operations. - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD7 that results in SSD failure at 40,000 hours of operation (i.e., 4 years, 205 days 16 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097382en_us>. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - The issue affects SSDs with an HPE firmware version prior to HPD7 that results in SSD failure at 40,000 hours of operation (i.e., 4 years, 205 days 16 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097382en_us>. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - The issue affects SSDs with an HPE firmware version prior to HPD7 that results in SSD failure at 40,000 hours of operation (i.e., 4 years, 205 days 16 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097382en_us>. - The issue affects SSDs with an HPE firmware version prior to HPD7 that results in SSD failure at 40,000 hours of operation (i.e., 4 years, 205 days 16 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097382en_us>. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This maintenance FW release addresses a rare corner case COMRESET issue at warm boot, and to address an early EOL behavior under certain use cases. - - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue that, under extremely rare conditions, can cause a data miscompare. It eliminates causes of some potential timeouts and hangs. It also addresses some temporary performance degradation conditions. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware release provides additional protection against command timeouts. - This firmware release provides additional protection against command timeouts. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00117258en_us> - Fixed a rare occurrence of meta data not being saved during a sudden power loss. * Fixed an issue where a performance drop was occurring during a write same operation. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Drive asserts under numerous PCIe link down events without PERST# condition. * Improvement to Background Media Scan if the required host idle time never occurs. * Check PE6031 VPD content and make appropriate correction if needed. - Drive asserts under numerous PCIe link down events without PERST# condition. * Improvement to Background Media Scan if the required host idle time never occurs. * Check PE6031 VPD content and make appropriate correction if needed. - Drive asserts under numerous PCIe link down events without PERST# condition. * Improvement to Background Media Scan if the required host idle time never occurs. * Check PE6031 VPD content and make appropriate correction if needed - This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30. - This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111061en_us - This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111061en_us - This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111061en_us - This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111061en_us - Fixed a rare issue that could lead to data loss during an unexpected power loss - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Firmware version HPD3 supports NDU (non-disruptive update) firmware updates. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Removed support of UNMAP command. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also includes emergency power off improvements. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also includes emergency power off improvements. - Improve overhead in handling of first packet to limit the incidence of NACKs due to lost byte from second packet. * Maintain Class Code value in a buffer area when link is down. Copy maintained Class Code from buffer to PCIe Config Space on link-up. * Change 'Percent Endurance Used' value reported in a Workload Log Page ( D6h ) to report actual endurance value. - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. - Fixed False UECC issue at idle power mode. * Old FW download Blocking (EPK70H3Q~EPK74H3Q). * FW is changed off the option of TX data alignment for each lane. * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us> - Fixed False UECC issue at idle power mode. * Old FW download Blocking (EPK70H3Q~EPK74H3Q). * FW is changed off the option of TX data alignment for each lane. * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - This firmware includes a fix that changes the response to "SMART READ LOG" command from 04/80/80 to 05/26/00, which prevents the drive from incorrectly reporting an error. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware includes a fix for slow performance during sequential write workloads with small queue depth. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Adds support for the HPE Security Log Page BBh, and improves drive reliability and responsiveness by including the latest firmware maintenance updates. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Reliability enhancements and VENDOR IDENTIFICATION field change from "HP" to HPE". - - This Firmware release address below fixes and additional features: * FW Transfer Fix * Drive Failure Fix * Power Loss Protection * FW Download Fix * Reset Fix * Shutdown fix * PCIe Improvement * Random Write Improvement - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Added support for SLES15. * Firmware version HPD3 supports NDU (non-disruptive update) firmware updates. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - - Fixed a rare issue that could lead to data loss during an unexpected power loss - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - - Added Support for RHEL 8.2 - This is a maintenance release that contains various drive reliability enhancements and code fixes accumulated since the last initial release, as well as a change to disable MCTP over PCIe VDM function to satisfy certain HPE platform environments. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware provides a change to the Vendor ID in the VPD page that refers to HP instead of HPE. - - - Fixes a data integrity risk where stale data is mistakenly used from cache. * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.** * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.** - *Problems Fixed:** * Fixed an issue where wear usage was not being reported correctly in the SmartSSD Wear Gauge Utility - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - If Power On Hours exceeds 70,000hrs, PM2R will report Hardware error (04/4C/A8) after the next Power Cycle and will not accept read/write commands. This fix will update storage location reporting when the maximum number of registrations in the Work Load Log read process reaches 70,000; the last registered 70,000th storage location will be modified to be read as the next (70,001st) storage location. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111296en_us - If Power On Hours exceeds 70,000hrs, PM2R will report Hardware error (04/4C/A8) after the next Power Cycle and will not accept read/write commands. This fix will update storage location reporting when the maximum number of registrations in the Work Load Log read process reaches 70,000; the last registered 70,000th storage location will be modified to be read as the next (70,001st) storage location. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111296en_us - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Reliability enhancements and VENDOR IDENTIFICATION field change from "HP" to HPE". - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Drive would stop responding on read retry Step 50 of Controller code correction. * In extremely rare cases, internal drive testing found that if I_T nexus loss is greater than 2 seconds, data loss might occur. If this rare condition occurs, the drive reports sense code 06/29/04 (HDD executed internal reboot), which displays on the screen and is entered in the drive log. * Drive may report sense code 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command come before drive ready. The drive name will no longer display in the list, and the system will not be able to access the drive until the system is power-cycled or reset. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a PSuite FwCheck L5005 error at the time of Support Service Pack for ProLiant (SPP) execution. * Fixed a L4500 error at the time of device WWN update. * Fixed a write CMD timeout at the time of SPL happens during sanitize. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - This FW release deploys an Enhanced Media Scan algorithm that addresses an issue when the host system does not provide enough idle time for drive's Foreground Media Scan to be activated, which is needed to ensure long term drive reliability. It also addresses few minor issues. - Firmware corrects an issue where the drive will be in a failed state after an unexpected power loss. When this occurs the drive will not recover after subsequent power cycles and will not be accessible by the system configuration and Host applications. * Refer Customer Bulletin for workarounds <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00042733en_us> - Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Firmware corrects an issue where the drive will be in a failed state after an unexpected power loss. When this occurs the drive will not recover after subsequent power cycles and will not be accessible by the system configuration and Host applications. - Added support for RHEL8. - Added support for SLES15SP1. - Added support for RHEL 8.2 - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed Store Userdata in Crash Occurred. * Fixed Log sense returned incorrect length of data. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The updates were included in a regularly scheduled 5300 maintenance release. This firmware has a security version upgrade to include TCGe SKUs and prevent a downloading of a back level firmware version of HPG0 after upgrading to HPG1. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Enhancement improved perfromance during a raid 5 drive rebuild. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Change Vendor Identification Field (VID data) from "HP" to "HPE". - TBD - Fix to issue in bootloader download during power loss. * Improvements to error exception. * Improvements to Secure lock fix during multi-thread read tests with high freq. power cycling. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improvements to Product Quality and Reliability. - - Added support for RHEL 8.3 - Fixed issues described in Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111900en_us. - Added support for Intel VROC platform. - The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us> - The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us> - Added support for SLES15. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8.2 - Added support for RHEL 8.3 - - This firmware includes a fix for an issue where the LED would continue blinking after a Sanitize operation completed. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Update MCTP base spec version from 1.2.0 to 1.3.0 * Change firmware to save the telemetry log buffer to smaller pages. * When reset happens, add to clear ready bit and other bits in health data according to MI 1.0a spec. - Improve overhead in handling of first packet to limit the incidence of NACKs due to lost byte from second packet * Maintain Class Code value in a buffer area when link is down. Copy maintained Class Code from buffer to PCIe Config Space on link-up * Change 'Percent Endurance Used' value reported in a Workload Log Page ( D6h ) to report actual endurance value - Added support for RHEL 8.3 - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. - Added support for RHEL 8.3 - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. * The Idle Power Management fix to keep the drive from entering and exiting the Lower Power Idle mode too frequently. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00112800en_us - Optimized T-offset setting. * Change MQES setting to 8192. * Fixed LED Behavior misaligned specs issue. * Fixed performance drop issue when 4+ SSD are installed. * The Idle Power Management fix to keep the drive from entering and exiting the Lower Power Idle mode too frequently. * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00112800en_us - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes - Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.., - Added support for SLES15. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes - Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes - Added support for SLES12SP1 - Added support for RHEL 8.2 - - Improved perfromance during a raid 5 drive rebuild. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Change Vendor Identification Field (VID data) from "HP" to "HPE". - - Fix to issue in bootloader download during power loss. * Change IDF Word 106 report 4K TU for 4/8TB drives to align with Microsoft SQL requirement. * Improvements to error exception. * Improvements to Secure lock fix during multi-thread read tests with high freq. power cycling. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improved Product Quality and Reliability. Changed Cap Charge Timeout to 14 seconds from 4 seconds to provide additional time for cap charge in marginal power environment. - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This update improves performance for random read workloads with delays between reads. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Increased Queue Size from 32 to 128 to be equal to the max number of chips. * Refresh NM SRAM area periodically only when idle as a possible work around on NM SRAM parity error. * Change the error response as 0x3 (SP_Busy) or 0x07 ( NO_SESSION_AVAILABLE) when host attempts to open another session while a session is already opened. * Disable verify compare if APP_CHK=0. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL 8.3 - Modify Drive Vendor Identification String (VID) in Inquiry page from "HP" to "HPE". - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Eliminates a potential hang on 4TB under certain pattern-dependent read conditions * Eliminates the possibility of a weak read signal under a sequenced combination of read/write conditions * Provides reliability enhancements involving head fly height dynamics * Enables download Mode 0Eh activation by Mode 0Fh - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL 8.3 - - Firmware corrects an issue where drives were not found during Power-On Self-Test device discovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Reliability enhancement for applications that write data to a narrow range of tracks. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Reliability enhancements and VENDOR IDENTIFICATION field change from "HP" to HPE". - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager. - Added support for SLES15. - This firmware adds a feature that will periodically assess the health of the writer element of the head by verifying the data after a write operation to ensure more robust data integrity. * When performing format on drives with marginal servo flaws, it takes too long to format or format fails with 03/31 reported across the interface on subsequent commands. This firmware includes a change that moves the servo flaw characterization retries earlier in the sequence of format. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc. - Added support for RHEL 8 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc. - Added support for RHEL 8 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Reliability enhancements and VENDOR IDENTIFICATION field change from "HP" to HPE". - - Fix to issue in bootloader download during power loss. * Change IDF Word 106 report 4K TU for 4/8TB drives to align with Microsoft SQL requirement. * Improvements to error exception. * Improvements to Secure lock fix during multi-thread read tests with high freq. power cycling. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA)is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improvements to Product Quality and Reliability. - - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a timeout error and improved performance. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This update includes a fix that prevents unrecoverable read errors in highly localized write intensive workload, and a new servo code revision that improves performance under specific vibration conditions. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a timeout error and improved performance. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Fixes a rare link loss issue and adds enhancements for drive reliability. * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive. * The new drive bootloader code will be activated after the next drive power cycle. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Fixes a rare link loss issue and adds enhancements for drive reliability. * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive. * The new drive bootloader code will be activated after the next drive power cycle. * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Fixes a rare link loss issue and adds enhancements for drive reliability. * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive. * The new drive bootloader code will be activated after the next drive power cycle. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us> - Fixes a rare link loss issue and adds enhancements for drive reliability. * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive. * The new drive bootloader code will be activated after the next drive power cycle. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us> - Added support for SLES15. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware includes a change to reduce response times on random read/write workloads where commands are sent at slow interval (one every few hundred milliseconds). - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Additional improvements in MCTP functionality. * Drive fails to train in BL460 after Windows warm reset or iLO reset. - Added support for SLES15. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8. - Fixed timing issue to pass VMWare VSAN certification. Downgrading to any previous version of firmware is not allowed. - Added support for RHEL8.2 - Added support for RHEL 8.3 - - Fix to issue in bootloader download during power loss. * Change IDF Word 106 report 4K TU for 4/8TB drives to align with Microsoft SQL requirement. * Improvements to error exception. * Improvements to Secure lock fix during multi-thread read tests with high freq. power cycling. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improved Product Quality and Reliability. Changed Cap Charge Timeout to 14 seconds from 4 seconds to provide additional time for cap charge in marginal power environment. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - *Enhancements/New Features:** * Improved robustness of Adjacent Track Interference (ATI) mitigation in System. - *Problems Fixed:** * Persistent Write Cache release size was miscalculated when disk write operation completed before command complete was reported to host which could result in slow sequential write performance of the drive. * Drive would stop operations when disk received COMRESET command during firmware download (DOWNLOAD MICROCODE command). NOTE: If this error occurs, data integrity is maintained and reboot is required to restart the drive operation. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware revision improves low-temperature performance and Error Correction Code (ECC) error recording for some commands. * It also improves internal logging capabilities for failure analysis. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Fixes an issue which caused the drive to become non-functional. * Fixes VPD Log D0h reported drive Sanitize times. * Adds support for Security Log Page BBh. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Fixes an issue which caused the drive to become non-functional. * Fixes VPD Log D0h reported drive Sanitize times. * Adds support for Security Log Page BBh. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Fixes an issue which caused the drive to become non-functional. * Fixes VPD Log D0h reported drive Sanitize times. * Adds support for Security Log Page BBh. - Fixes an issue which caused the drive to become non-functional. * Fixes VPD Log D0h reported drive Sanitize times. * Adds support for Security Log Page BBh. - This firmware adds a feature that will periodically assess the health of the writer element of the head by verifying the data after a write operation to ensure more robust data integrity. * When performing format on drives with marginal servo flaws, it takes too long to format or format fails with 03/31 reported across the interface on subsequent commands. This firmware includes a change that moves the servo flaw characterization retries earlier in the sequence of format. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Enhancement Improved perfromance during a raid 5 drive rebuild. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Fixes a data integrity risk where a recoverable error can prevent a write command from completing properly. * Fixes a data integrity risk due to incorrect re-ordering of commands, when overlapped commands occur. * Fixes a data integrity risk during very large blocks of sequential commands with a data transfer between 1020MB and 1024MB. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Firmware version HPG2 prevents the occurrence of a rare issue which could lead to slow drive performance. This issue has the potential to impact all drives in configurations where the drives might be allowed to be idle for greater than 1 second. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware includes a change to reduce response times on random read/write workloads where commands are sent at slow interval (one every few hundred milliseconds). - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added Support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The FW version is Changed from HPG0 to HPG1. Changed the thermal throttling scheme. SMART 60 was matched with Tcase 70 and Run the thermal throttling at SMART 65. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware includes a fix that changes the response to "SMART READ LOG" command from 04/80/80 to 05/26/00, which prevents the drive from incorrectly reporting an error. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - This firmware includes a fix that changes the response to "SMART READ LOG" command from 04/80/80 to 05/26/00, which prevents the drive from incorrectly reporting an error. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Added support for RHEL8. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location.This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing. * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements. - Fixed HPK3 drive reports incorrect Device ID issue. - Added support for VMD enabled Intel VROC platform. - Fixed HPK3 drive reports incorrect Device ID issue. - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - HPG6 introduces bug fixes, reliability enhancement and modification in SMART Attributes. Once HPG6 is downloaded, the drive cannot be changed back to an earlier firmware (eg, HPG3). - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Free up more DRAM for user data to improve DRAM management. * Drive would stop responding on read retry Step 50 of Controller code correction. * In extremely rare cases, internal drive testing found that if I_T nexus loss is greater than 2 seconds, data loss might occur. If this rare condition occurs, the drive reports sense code 06/29/04 (HDD executed internal reboot), which displays on the screen and is entered in the drive log. * Drive may report sense code 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command come before drive ready. The drive name will no longer display in the list, and the system will not be able to access the drive until the system is power-cycled or reset. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware provides a change to the Vendor ID in the VPD page that refers to HP instead of HPE. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware release provides additional protections against hangs in certain corner cases, and cleans up some error handling and command behavior issues. * It also fixes a firmware bug that caused significant performance degradation in abnormally long data transfers. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8 - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing. - Added support for RHEL8. - Fixes an issue where the SSID was not programmed correctly to the drive. This may cause issues with the drive not being identified correctly in the Integrated Lights Out Utility. - Added support for RHEL8.2 - Fixed SSD weargauge report error issue. * Fixed Assign FWState as TR_DONE_ERR at the correct location. * Prepare proper response data for Get Message Type Supported MCTP Command. * Added code to preserve current feature values cross live firmware update. * Allocate 4 bytes instead of 2 bytes for parameter code. * Changed the value for NLB equal to NSize -1. - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - VENDOR IDENTIFICATION field change from "HP" to "HPE". - - Fix to issue in bootloader download during power loss. * Change IDF Word 106 report 4K TU for 4/8TB drives to align with Microsoft SQL requirement. * Improvements to error exception. * Improvements to Secure lock fix during multi-thread read tests with high freq. power cycling. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Improved Product Quality and Reliability. Changed Cap Charge Timeout to 14 seconds from 4 seconds to provide additional time for cap charge in marginal power environment. - - HPS4 firmware release resolved a firmware timing issue which occurred during drive long self-test and resulted in a timeout condition that caused the drive to become unrecognized by the system. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc... - Added support for RHEL 8.3 - - VENDOR IDENTIFICATION field changed from "HP" to "HPE" and Reliability improvements. - *Problems Fixed:** * HPK3 firmware resolved an issue that caused the disk activity ring, which is located on NVME SSD drive carrier, to constantly spin regardless of drive activity status. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.., - Added support for SLES15. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Added support for RHEL8. - Fixes a potential latency issue caused by an incorrect pre-fetch algorithm. * Resolves an issue with a possible bus hang during a system reboot. * Once HPK4 is downloaded, the drive firmware cannot be changed back to an earlier firmware version (eg, HPK3 or HPK2) due to security changes. - Added support for SLES15SP1. - Added support for RHEL 8.2 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fix issue with Drive Hang on Read Retry Step 50 Controller code correction - When "command aging timer expire" AND "I_T nexus loss" occurs at the same time, HDD reports sense code, 06-29-04 Sense code correction. * Drive may report sense 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command come before drive ready. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware provides a change to the Vendor ID in the VPD page that refers to HP instead of HPE. - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed a bug which is related to SSDs returning unexpected data when drive statistics are queried and could result in server instability. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097984en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - PrefetchClear logic error on Write CMD. * ICRC Data Integrity improvement. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware improves potential timeouts that could occur during the write error recovery process (causing the drive to internally reset), and corrects possible data mismanagement issues. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Improve overhead in handling of first packet to limit the incidence of NACKs due to lost byte from second packet * Maintain Class Code value in a buffer area when link is down. Copy maintained Class Code from buffer to PCIe Config Space on link-up * Change 'Percent Endurance Used' value reported in a Workload Log Page ( D6h ) to report actual endurance value - Optimized T-offset setting . * Change MQES setting to 8192. * Code change to set 'Slot Clock Configuration bit in Link Status register. * Fixed LED Behavior misaligned specs issue. - Optimized T-offset setting . * Change MQES setting to 8192. * Code change to set 'Slot Clock Configuration bit in Link Status register. * Fixed LED Behavior misaligned specs issue. - Fixed False UECC issue at idle power mode (12.8TB and 15.36TB only). * Apply PCLK running PHY option, PLL clock disable can be avoided in lane 0 missing case. * Old FW download Blocking. * FW is changed off the option of TX data alignment for each lane. * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us> - Added support for VMD enabled Intel VROC platform - Fixed False UECC issue at idle power mode (12.8TB and 15.36TB only). * Apply PCLK running PHY option, PLL clock disable can be avoided in lane 0 missing case. * Old FW download Blocking. * FW is changed off the option of TX data alignment for each lane. * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us> - Fixed False UECC issue at idle power mode (12.8TB and 15.36TB only). * Apply PCLK running PHY option, PLL clock disable can be avoided in lane 0 missing case. * Old FW download Blocking. * FW is changed off the option of TX data alignment for each lane. * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us> - - This firmware includes a fix for slow performance during sequential write workloads with small queue depth. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - This firmware updates the drive to indicate NDU compliance. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs. * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously. * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fixed Store Userdata in Crash Occurred * Fixed Log sense returned incorrect length of data. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliantand Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc... - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Needed to support Samsung 16G DRAM. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This release corrects logical block address mismatches that could results in partial or total data loss. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - A low-probability, high severity corner case of sustained outer-diameter activity with emergency power off when heads are at the outer diameter prevented heads from parking/latching properly on a few drives in the field. - Added support for RHEL 8.4 and SLES15SP3. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Fixes a data integrity risk where stale data is mistakenly used from cache. * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Fixes a data integrity risk where stale data is mistakenly used from cache. * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Fixes a data integrity risk where stale data is mistakenly used from cache. * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Fixes a data integrity risk where stale data is mistakenly used from cache. * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation. * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read. - Fix to the error recovery algorithm to improve the overall reliability of the device. * Fix to insure complete support of internal logging during a sudden power off event which prevents the device entering into a degraded state. * Fixed a mishandling of error handling data during back ground media activities prevent a data issue. * Fix to correct a buffer management timing issue internal to the device allowing for a more robust internal movement of data. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Fixed an issue with performance drops during mixed workload operations. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - When SSD statistics are queried, erroneous drive temperatures may be reported. When this occurs, the system may encounter any of the two following conditions, leaving the server in an unstable state. * Server shutdown * In VMware vSAN environment, storage volume taken offline. * For important information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097984en_us> - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - PrefetchClear logic error on Write CMD. * ICRC Data Integrity improvement. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - Fix issue with drive Hang on read retry Step 50 Controller code correction - When "command aging timer expire" AND "I_T nexus loss" occurs at the same time, HDD reports sense code, 06-29-04 Sense code correction. * Drive may report sense 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command come before drive ready. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - There is no compelling reason to update this firmware. Risk is that whoever looks at the Vendor ID in the VPD page will notice that it refers to HP instead of HPE. There is no functional risk if not upgraded. - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.3 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.' - - Added support for RHEL8. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware release provides additional protections against hangs in certain corner cases, and cleans up some error handling and command behavior issues. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.. - Added support for RHEL 8.2 - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware release provides additional protections against hangs in certain corner cases, and cleans up some error handling and command behavior issues. - Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. - This firmware release provides additional protection against command timeouts. - This firmware release provides additional protection against command timeouts. * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00117258en_us> - Fixes an issue where the SSID was not programmed correctly to the drive. This may cause issues with the drive not being identified correctly in the Integrated Lights Out Utility. - Fixed SSD weargauge report error issue. * Fixed Assign FWState as TR_DONE_ERR at the correct location. * Prepare proper response data for Get Message Type Supported MCTP Command. * Added code to preserve current feature values cross live firmware update. * Allocate 4 bytes instead of 2 bytes for parameter code. * Changed the value for NLB equal to NSize -1. - - Added fix for Embedded Remote Support in an IPv6-only environment. * Added fix for Embedded Remote Support data collection for systems with multiple Smart Array Controllers. - No new features added. - iLO 4 does not enforce the requirement for strong host keys when the Enforce AES/3DES Encryption and FIPS mode settings are enabled - None - Potential Ripple20 vulnerabilities affecting the TCP/IP stack. - Users can view and modify the System thermal configuration settings using iLO interfaces. - On a server that is registered for Remote Support, if you download the Active Health System Log when Active Health System reporting information is being sent to Hewlett Packard Enterprise, the downloaded file might contain only baseline information. * The Smart Storage Battery might be listed on the System Information > Network page in the iLO web interface. - Added support to display login banner SSH login - Potential vulnerabilities in network stack. Click [here](https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=hpesbhf04070en_us) to know more about the Security Vulnerabilities. * Active directory test may fail during LDAP authentication. - \- IML reports fan modules failed for D3000 only after server reboot \- eRS service event added for Critical events like System Power Fault Detection \- Security fixes \- Added a Content Security Policy( CSP) to harden the web interfaces \- Enhanced Input validation for user controlled data \- Fixes for multiple security vulnerabilities - This product addresses an issue where the NIC Serial Number for the HPE Ethernet 1Gb 4-port 331FLR Adapter is not displayed in AHS. The firmware in this product addresses an issue where the "Reboot Required" icon is not highlighted after a NIC firmware update (via System Utilities->Embedded Application->Firmware Update) completes. - This product now supports SUSE Linux Enterprise Server 15. - N/A - This product now supports Red Hat Enterprise Linux 6 Update 10. - This product corrects an issue where the component fails to update adapter firmware when running on ESXi 6.7. This product corrects an issue where an incorrect device (Network Controller) name is displayed in the RBSU. - This product corrects an issue where random PXE boot installation failures occur when booting in UEFI mode. - This product now remove supports Synergy and Blade Server. - This product addresses an issue where Legacy Boot Protocol(System Utilities -> System Configuration -> NIC HII menu -> BA Configuration Menu) changes from None to PXE. This product addresses an issue where it would be forced to exit System Utilities when select Port 2 & Port 3(System Utilities -> System Configuration -> NIC HII menu). - This product corrects the wrong spare number while it was originally not the same as what was written on the label of package. - This product addresses an issue about lack of information under AHS log. * This product addresses an RSOD issue which appeared intermittently during POST after having a warm reboot. * This product addresses a modification on help string of Family Firmware Version. - This product now supports Red Hat Enterprise Linux 6. * This product now supports Red Hat Enterprise Linux 8. * This product no longer supports ProLiant Blade servers and devices. Those servers and devices are now supported by the [HPE Blade Intel Online Firmware Upgrade Utility for Linux](https://www.hpe.com/global/swpublishing/MTX-f35e20f5c7624892a850ceb642). * This product no longer supports Synergy servers and devices. Those servers and devices are now supported by the [HPE Synergy Intel Online Firmware Upgrade Utility for Linux](https://www.hpe.com/global/swpublishing/MTX-bde50c38fbba4c2cb39d29468b). - This product addresses an issue where LLDP are disabled. * This product addresses an issue where "Firmware Image Properties", "Device Level Configuration", and "Link Speed Status" options in NIC HII menu will disappear when F7 is pressed. * This product addresses an issue where Firmware upgrade fail in SLES15 with secureboot enabled. * This product addresses an issue where POST when ESC Is Pressed to Enter The BIOS Setup Utility with HP Ethernet 1Gb 4-port 366FLR Adapter. * This product addresses an issue where there is no VLAN function under Legacy mode. - This product addresses an WOL issue that system wakes up automatically if any magic packet being sent before system was shut down. - This product addresses an WOL issue that system wakes up automatically if any magic packet being sent before system was shut down. - This product addresses an issue where ECC error occurs when running failed recovery with HPE Ethernet 10Gb 2-port 562T Adapter and HPE Ethernet 10Gb 2-port 562FLR-T Adapter. - This product now supports Red Hat Enterprise Linux 6. - This product addresses an issue where ECC error occurs when running failed recovery with HPE Ethernet 10Gb 2-port 562T Adapter and HPE Ethernet 10Gb 2-port 562FLR-T Adapter. - This product addresses an WOL issue that system wakes up automatically if any magic packet being sent before system was shut down. - This product addresses an issue where Systems Insight Display (SID) modul is green when there's no Network connection. - - Initial release. This product now supports the following operatings systems: * Red Hat Enterprise Linux 7 Update 7 * Red Hat Enterprise Linux 8 Update 0 * SUSE Linux Enterprise Server 15 SP1 - This product addresses an issue where the "Firmware Image Properties," "Device Level Configuration," and "Link Speed Status" options in NIC HII menu disappear when F7 is pressed. - - *Changes and New Features in version 1.8.1.0.0 :** * Added hfi1_eprom **v10_8_0_0_13.** * Loader ROM **HfiPcieGen3Loader_1.8.1.0.0.rom** and driver EFI **HfiPcieGen3_1.8.1.0.0.efi** were added. - *Following issues have been resolved in version 1.9.2:** * Due to a SLES 15 kernel setting, hfi1_eprom cannot work while the HFI driver is loaded. The tool and driver are mutually exclusive. - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Fixes submitted in version 14.26.1040:** * A function was misbehaving when a PCIe TLP was set with a poisoned indication. * The "destroy mkey " command was getting stuck when rebooting the hypervisor. * The total firmware reset time is increased by 1 second. **Fixes submitted in version 16.26.1040:** * On rare occasions, when firmware coalesce Host stuck events occur, a async event might be delayed to be reported, and not be triggered until the next time the PCIe hangs on one of the hosts. * Unexpected queue pairs transitioned to error in lossy tests. * Limited the maximum amount of dumps created on a PF. * Renamed the GMP Mellanox Vendor Specific External Capability mask enum from IsDiagnosticCountersSupported to IsDiagnosticDataSupported. * Stability issues with RDMA over Converged Ethernet (RoCE) retransmissions under stress were affecting Zero-Touch-RoCE. * Fixed an issue that caused a function to misbehave when a PCIe Transaction Layer Packet (TLP) was set with a poisoned indication. * Large number of packets dropped when running Jumbo frames with TTL rewrite. * Limited the number of the elements in the Quality of Service (QoS) tree 2K. Note: Creating more than 250 Vport_tc for every TC is not allowed. * Queue Pair (QP) flow query was always taking port 1, Firmware will now reply the proper port, 1 or 2, for the dual port RoCE net device. * The nack counters constantly reported as "0". * In a rare scenario when the driver is executing the "2err" command and the QP is in Send Queue (SQ) drain state, the firmware might post event of broken Work Queue (WQ) instead of sending error Completion Queue Element (CQEs) on all the Work Queue Entry (WQEs). - *Firmware for the following devices are updated to 2.42.5044 :** 779799-B21 (HP Ethernet 10G 2-port 546FLR-SFP+ Adapter) 779793-B21 (HP Ethernet 10G 2-port 546SFP+ Adapter) **Firmware for the following devices are updated to 14.26.4012:** 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter) 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter) **Firmware for the following device is updated to 16.26.4012:** 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter) **New features and changes in version 14.26.4012 and 16.26.4012:** * Enables the user to globally disable RoCE on init by writing to the access register NCFG_REG. * Enabled Zero-Touch RoCE (ZTR) slow start capability for responder flows. * Extracts and prints data segments generated by the firmware. * Hairpin QP buffer is now available in Flow Control. Host Chaining now supports full fairness between several devices. - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Fixes submitted in version 14.26.4012:** * Fixed an issue that resulted in dump file being corrupted when using resource dump to dump a WQ buffer with a size more than 2^16 bytes. * Enabled the option to prevent clock and capture complex programmable logic device (CPLD general-purpose input/output (GPIO)s glitch upon firmware reset. **Fixes submitted in version 16.26.4012:** * Fixed a rare issue that caused the device to hang when encountering Remote Direct Memory Access (_RDMA_) read operations with very short retry time. In this case, the driver failed to load due to wait_fw_init (mlx5_load_one failed with error code -16). * Increased the bandwidth for RoCE scenarios using a specific Quantum Private Network (QPN). * Enabled lower granularity of rate for Congestion Control. * Set the min_time_between_cnps default value as 2. * Fixed an issue that prevented the meter counter from being cleared after the flow meter being updated. In this case, the Information rate took up to 10 minutes to take effect. * Fixed an issue that caused a unequal cost multipath when device set the lag_tx_port_affinity of the Queue Pair(QP). * Fixed a performance degradation issue that occurred when the flow group match criteria includes both IPV6 and IP_ECN. * Fixed a low performance issue that occurred occasionally when ran firmware steering with high insertion rate during "adding and removing" low table entries. * When working with Multi-GVMI and SR-IOV, and with a high number of Virtual Functions and sub-functions, the driver start may fail for the VFs/sub-functions. * Fixed a performance issue that occurred when ran numerous VMs with NIC Steering rules. * sw_reset action fails in case it was initiated during live-patch flow. * SX_RDMA was not supported when Dual Port RoCE feature is enabled. Due to this behavior, packets sent on other port are be processed by the SX_RDMA table. - *Firmware for the following devices are updated to 2.42.5044 :** 779799-B21 (HP Ethernet 10G 2-port 546FLR-SFP+ Adapter) 779793-B21 (HP Ethernet 10G 2-port 546SFP+ Adapter) **Firmware for the following devices are updated to 14.26.4012:** 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter) 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter) **Firmware for the following device is updated to 16.26.4012:** 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter) **New features and changes in version 14.26.4012 and 16.26.4012:** * Enables the user to globally disable RoCE on init by writing to the access register NCFG_REG. * Enabled Zero-Touch RoCE (ZTR) slow start capability for responder flows. * Extracts and prints data segments generated by the firmware. * Hairpin QP buffer is now available in Flow Control. Host Chaining now supports full fairness between several devices. - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Fixes submitted in version 14.26.4012:** * Fixed an issue that resulted in dump file being corrupted when using resource dump to dump a WQ buffer with a size more than 2^16 bytes. * Enabled the option to prevent clock and capture complex programmable logic device (CPLD general-purpose input/output (GPIO)s glitch upon firmware reset. **Fixes submitted in version 16.26.4012:** * Fixed a rare issue that caused the device to hang when encountering Remote Direct Memory Access (_RDMA_) read operations with very short retry time. In this case, the driver failed to load due to wait_fw_init (mlx5_load_one failed with error code -16). * Increased the bandwidth for RoCE scenarios using a specific Quantum Private Network (QPN). * Enabled lower granularity of rate for Congestion Control. * Set the min_time_between_cnps default value as 2. * Fixed an issue that prevented the meter counter from being cleared after the flow meter being updated. In this case, the Information rate took up to 10 minutes to take effect. * Fixed an issue that caused a unequal cost multipath when device set the lag_tx_port_affinity of the Queue Pair(QP). * Fixed a performance degradation issue that occurred when the flow group match criteria includes both IPV6 and IP_ECN. * Fixed a low performance issue that occurred occasionally when ran firmware steering with high insertion rate during "adding and removing" low table entries. * When working with Multi-GVMI and SR-IOV, and with a high number of Virtual Functions and sub-functions, the driver start may fail for the VFs/sub-functions. * Fixed a performance issue that occurred when ran numerous VMs with NIC Steering rules. * sw_reset action fails in case it was initiated during live-patch flow. * SX_RDMA was not supported when Dual Port RoCE feature is enabled. Due to this behavior, packets sent on other port are be processed by the SX_RDMA table. - *Firmware for the following devices are updated to 2.42.5044 :** 779799-B21 (HP Ethernet 10G 2-port 546FLR-SFP+ Adapter) 779793-B21 (HP Ethernet 10G 2-port 546SFP+ Adapter) **Firmware for the following devices are updated to 14.27.1016:** 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter) **Firmware for the following devices are updated to 14.27.1016:** 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter) **Firmware for the following device is updated to 16.27.1016:** 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter) **New features and changes in version 14.27.1016 and 16.27.1016:** * RoCE Selective Repeat : This feature introduces a new QP (Queue Pair) retransmission mode in RoCE: recovery from packet drop by resending the dropped packet and not only all the PSN window (Go-Back-N protocol), This new capability comes with the following limitations: * Selective repeat cannot be used with AR. * Does not work with signature (T10-DIF). * Does not work with Tag Matching enabled. * Allows BMC (Board Management Control) to query and control NIC over RedFish API. Currently, the NIC supports reading data and setting basic Ethernet and InfiniBand parameters. * Enables matching of source_vhca_port in the FDB also known as FIB ( Forwarding Information Base) flow for ECMP (Equal Cost Multi Pathing) hardware offload on a single FDB. * Firmware can be now updated as well as DB strings while performing Live Firmware Patch. * Added support for dumping hardware steering entries (raw data) using the resource dump API. * The eth_link_down_counter now counts logical link downs as well. **New features and changes in version 16.27.1016:** * Removed power consumption limitation.This new capability removes the necessity to disable the port due to insufficient power. When this feature is enabled, an event will be sent on every transition between the following power states: * Power limit is not advertised. * Sufficient power detected. * Insufficient power detected. * Enables the device to generate events that will notify the user about any resource dumps updates. The resource dump owner (PF/ECPF) will be notified on the VF command failures by events that will contain the needed information to call the resource_dump command. The device will dump the resource in the standard resource dump sequence. * Added support for RSS (Really Simple Syndication) based on inner headers of GTP-U tunneled packets and for relaxed ordering read when using the create_mkey flag. - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Fixes submitted in version 14.27.1016:** * An issue that caused the device to perform DMA (Direct Memory Access) into memory already returned to the OS during the transition between the pre-boot driver to the OS driver. * An issue that caused the ZTR (Zero Touch RoCE) counters query to always return 0. * NC-SI bandwidth was dropping to 20-40kBps with a high amount of package drops, in a network environment with high latency (over 110ms). **Fixes submitted in version 16.27.1016:** * An issue that caused the device to perform DMA (Direct Memory Access) into memory already returned to the OS during the transition between the pre-boot driver to the OS driver. * An out-of-range issue when reading or writing the q_counters was fixed. * Multi-Host adapter cards that resulted in wrong handling of PERST on auxiliary links. - *Firmware for the following devices are updated to 2.42.5044 :** 779799-B21 (HP Ethernet 10G 2-port 546FLR-SFP+ Adapter) 779793-B21 (HP Ethernet 10G 2-port 546SFP+ Adapter) **Firmware for the following devices are updated to 14.27.4000:** 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter) **Firmware for the following devices are updated to 14.27.4000:** 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter) **Firmware for the following device is updated to 16.27.2008:** 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter) **New features and changes in version 16.27.2008:** * Added the following segments, as appeared in the PRM, to the Resource Dump: * PRM_QUERY_QP * PRM_QUERY_CQ * PRM_QUERY_MKEY * QUERY_VNIC_ENV **New features and changes in version 14.27.4000:** * Added mlxconfig support for power reduction: * PCI CAP * AUTO_POWER_SAVE_LINK_DOWN - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Following issues have been fixed in firmware version 14.27.4000:** * The sent packet hung while the device entered FLR mode. * Enabled Bar configuration bytewise by applying the write_en bitmask. * The device hung while running the sw reset flow under heavy stress and with many open resources. * The completions (CQ)completed due to a race condition in the firmware transport error handlers, and the error stressors, where the error stressors would hang the firmware transport error handler flow. * The fragmented IP packets were dropped. **Following issues have been fixed in firmware version 16.27.2008:** * Although the effective BER (after FEC) was expected to meet the design targets (e.g. 10e-14 or lower), occasionally it was higher. * High BER occured when connecting cables of type 0.5/1m DAC to an HDR speed. * The PCIe Tx parameters did not load correctly when the speed was changed after the PCIe link was disabled. * The desched_threshold field did not work properly. * The "roce_adp_retrans" counter was presenting the values of the "local_ack_timeout_err" counter. * If Relaxed Ordering was disabled by running the "setpci" command, it would not be functional even after re-enabling it by running the "setpci" command again. - *Fixes submitted in version 2.42.5044 :** * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode. **Following issues have been fixed in firmware version 14.29.1016:** * The sent packet hung while the device entered FLR mode. * Enabled Bar configuration bytewise by applying the write_en bitmask. * The device hung while running the sw reset flow under heavy stress and with many open resources. * The completions (CQ)completed due to a race condition in the firmware transport error handlers, and the error stressors, where the error stressors would hang the firmware transport error handler flow. * The fragmented IP packets were dropped. **Following issues have been fixed in firmware version 16.29.1016:** * Although the effective BER (after FEC) was expected to meet the design targets (e.g. 10e-14 or lower), occasionally it was higher. * High BER occured when connecting cables of type 0.5/1m DAC to an HDR speed. * The PCIe Tx parameters did not load correctly when the speed was changed after the PCIe link was disabled. * The desched_threshold field did not work properly. * The "roce_adp_retrans" counter was presenting the values of the "local_ack_timeout_err" counter. * If Relaxed Ordering was disabled by running the "setpci" command, it would not be functional even after re-enabling it by running the "setpci" command again. - *Fixes in version** **12.24.1000 and 16.24.1000:** * mlxconfig tool reported all possible expansion ROM images, instead of presenting only the existing images. * Modifying VMQoS rate limiter parameters during traffic caused transmission failure. * Aligned the default tuning type in PHY TEST MODE to the device protocol. * When a device is operating in Safe Mode state, and the user issues the mlxfwreset command, the device might fail to come-up correctly after the reset. Note: Do not run mlxfwreset when operating in a Safe Mode state. * Fixed an issue related to PCIe "Surprise link down" event reporting capability. * Fixed an issue that resulted in the link partner experiencing false active linkup when plugging in a base-T cable to a closed port. **Fixes in version** **12.24.1000:** * Fixed an issue that caused the max_qp_retry_freq_exceeded counter (including a CQE with error syndrome 0x97, and the QP moving to error state) to be activated only after exceeding the NIC Vport context max_qp_retry_limit, and not when reaching it. **Fixes in version** **16.24.1000:** * PCIe bifurcation issue. * Deadlock in RX related to the "send-invalidate" flow, resulted in RX getting stuck. * Rare errors in RX that resulted in double completion. - *Firmware for the following devices are updated to 12.26.1040:** 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter) **Firmware for the following devices are updated to 16.26.1040:** 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter) 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter) **Changes and New features in firmware version 12.26.1040 and 16.26.1040:** * Enabled the firmware by using the ICMD commands to deal with diagnostic counters similar to cmdif. They can be called via the vsec space. The counters' values are returned only via the tracer. The ICMD Query Caps indicate support and expose the list of the supported counters. * User Context Object (DEVX) is a containerized sandbox per user, to access PRM command securely by using General Object commands, UMEM and UCTX contexts. The allowed functionalities of this capability depend on the user permissions. The following functionalities are still managed by the Kernel: * Resource cleaning * UCTX stamping * Blocking the physical address and IRQ from these UCTX * Added support for reporting the supported affiliated and unaffiliated asynchronous events to DEVX users through the command interface. * Zero-Touch-RoCE counters are now available to the user for debuggability purposes when using the Zero-Touch-RoCE feature. * This release contains important reliability improvements and security hardening enhancements. Mellanox recommends upgrading your device firmware to this release to improve the device firmware security and reliability. **Changes and New features in firmware version 16.26.1040:** * Added support for the following features: * Address Translation Service (ATS) support for MKEY and UMEM. * Exposing the Vital Product Data (VPD) on Virtual Function (VF). * Hairpin Drop Counter. * Hairpin and TM RNDV QPs to work with DevX. * Creating software managed steering tables in eSwitch/Forwarding Table (FDB). - *Fixes submitted in version 12.26.1040:** * IPoIB could not to function when there were Dynamically Connected Transport (DC) CNAK Queue Pairs (QPs) active. * On rare occasions, when firmware coalesce Host stuck events occur, a async event might be delayed to be reported, and not be triggered until the next time the PCIe hangs on one of the hosts. * Renamed the GMP Mellanox Vendor Specific External Capability mask enum from IsDiagnosticCountersSupported to IsDiagnosticDataSupported. * Fixed an issue that caused a function to misbehave when a PCIe Transaction Layer Packet (TLP) was set with a poisoned indication. **Fixes submitted in version 16.26.1040:** * On rare occasions, when firmware coalesce Host stuck events occur, a async event might be delayed to be reported, and not be triggered until the next time the PCIe hangs on one of the hosts. * Unexpected queue pairs transitioned to error in lossy tests. * Limited the maximum amount of dumps created on a PF. * Renamed the GMP Mellanox Vendor Specific External Capability mask enum from IsDiagnosticCountersSupported to IsDiagnosticDataSupported. * Stability issues with RDMA over Converged Ethernet (RoCE) retransmissions under stress were affecting Zero-Touch-RoCE. * Fixed an issue that caused a function to misbehave when a PCIe Transaction Layer Packet (TLP) was set with a poisoned indication. * Large number of packets dropped when running Jumbo frames with TTL rewrite. * Limited the number of the elements in the Quality of Service (QoS) tree 2K. Note: Creating more than 250 Vport_tc for every TC is not allowed. * Queue Pair (QP) flow query was always taking port 1, Firmware will now reply the proper port, 1 or 2, for the dual port RoCE net device. * The nack counters constantly reported as "0". * In a rare scenario when the driver is executing the "2err" command and the QP is in Send Queue (SQ) drain state, the firmware might post event of broken Work Queue (WQ) instead of sending error Completion Queue Element (CQEs) on all the Work Queue Entry (WQEs). - *Firmware for the following devices are updated to 12.27.1016:** 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter) **Firmware for the following devices are updated to 16.27.1016:** 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter) 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter) **Changes and New Features in firmware version 12.27.1016 and 16.27.1016:** * RoCE Selective Repeat introduces a new QP retransmission mode in RoCE: recovery from packet drop by resending the dropped packet and not only all the PSN window (Go-Back-N protocol), This new capability comes with the following limitations: * Selective repeat cannot be used with AR * Does not work with signature (T10-DIF) * Does not work with Tag Matching enabled * Allows BMC to query and control NIC over RedFish API (https://www.dmtf.org/standards/redfish). Currently, the NIC supports reading data and setting basic Ethernet and InfiniBand parameters. * Enables matching of source_vhca_port in the FDB flow for ECMP hardware offload on a single FDB. * Added support for dumping hardware steering entries (raw data) using the resource dump API. * The eth_link_down_counter now counts logical link downs as well. **Changes and New Features in firmware version 16.27.1016:** * Removed power consumption limitation. This new capability removes the necessity to disable the port due to insufficient power. When this feature is enabled, an event will be sent on every transition between the following power states: * Power limit is not advertised * Sufficient power detected * Insufficient power detected * Firmware can be now updated as well as DB strings while performing Live Firmware Patch. * Enables the device to generate events that will notify the user about any resource dumps updates. The resource dump owner (PF/ECPF) will be notified on the VF command failures by events that will contain the needed information to call the resource_dump command. The device will dump the resource in the standard resource dump sequence. * Added support for the following features: * RSS based on inner headers of GTP-U tunneled packets. * Relaxed ordering read when using the create_mkey flag. Note: This capability is not supported when using Multi-Host cards and when in PCIe-Switch mode. - *Fixes submitted in version 12.27.1016:** * ZTR counters query was always set to return 0. * The adapter card was prevented from going into the bypass mode when the BMC disabled the hardware arbitration. * Performance degradation and a high packet drop occurred when SRIOV was enabled and packets went through the FDB default behaviour. * Due to the string DB not being updated after Live-Patch, the tracer could not function after Live-Patch. * Fixed a rare issue that caused other active functions to receive a malformed CQE during driver (PF or VF) unload or FLR flows. * Firmware error was observed when FLR occurred at the same time as the teardown. As a result, the teardown flow took a lock, and never released it because it was being aborted by an FLR. **Fixes submitted in version 16.27.1016:** * Fixed an issue that caused the device to perform DMA into memory already returned to the OS during the transition between the pre-boot driver to the OS driver. * Out-of-range issue when reading or writing the q_counters. * Fixed an issue that in Multi-Host adapter cards that resulted in wrong handling of PERST on auxiliary links. * ZTR counters query was always set to return 0. * The adapter card was prevented from going into the bypass mode when the BMC disabled the hardware arbitration. * A non-standard tool was required to perform the first LFWP patching when used with the GA firmware version. * Updated the OOOSLMask behaviour. Firmware now will apply OOOSLMask even if it is set to zero (OOOSLMask = 0). * Redundant page consumption in the init_hca. * The sw_reset option was not supported when ATS was enabled. * When ESWITCH_IPV4_TTL_MODIFY_ENABLE configuration was enabled in mlxconfig, there was performance degradation in small packet sizes. * Due to the string DB not being updated after Live-Patch, the tracer could not function after Live-Patch. * Fixed a rare issue that caused other active functions to receive a malformed CQE during driver (PF or VF) unload or FLR flows. * The PCI link was not getting established when the firmware was corrupted. * FW assert was triggerred and resulted in a wrong deallocation of a resource when Packet Pacing was enabled, and a QP was being destroyed. * Firmware error was observed when FLR occurred at the same time as the teardown. As a result, the teardown flow took a lock, and never released it because it was being aborted by an FLR. - *Firmware for the following devices are updated to 12.27.4000:** 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter) **New Feature and Changes in Version 12.27.4000:** * Added the following segments, as appeared in the PRM, to the Resource Dump: * PRM_QUERY_QP * PRM_QUERY_CQ * PRM_QUERY_MKEY * QUERY_VNIC_ENV **Firmware for the following devices are updated to 16.27.2008:** 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter) 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter) **New Feature and Changes in Version 16.27.2008:** **This release contains important reliability improvements and security hardening enhancements. Upgrade the firmware of the device to this release to improve the devices' firmware security and reliability.** * Improved init_hca performance in Parallel Function initialization. - *Following issues have been fixed in firmware version 16.27.2008:** * Although the effective BER (after FEC) was expected to meet the design targets (e.g. 10e-14 or lower), occasionally it was higher. * High BER occured when connecting cables of type 0.5/1m DAC to an HDR speed. * The PCIe Tx parameters did not load correctly when the speed was changed after the PCIe link was disabled. * The desched_threshold field did not work properly. * The "roce_adp_retrans" counter was presenting the values of the "local_ack_timeout_err" counter. * If Relaxed Ordering was disabled by running the "setpci" command, it would not be functional even after re-enabling it by running the "setpci" command again. **Following issues have been fixed in firmware version 12.27.4000:** * The device hung while running the sw reset flow under heavy stress and with many open resources. * Low PXE performance observered while using the VSC to trigger the send_ring_doorbells. * IPoIB and DC would not work together. * DC funtionality issues. - *Firmware for the following devices are updated to 12.28.1002:** 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter) **New Feature and Changes in Version 12.28.1002:** * Increased the maximum XRQ number to 512. **Firmware for the following devices are updated to 16.29.1016:** 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter) 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter) **New Feature and Changes in Version 16.29.1016:** Added support for following features: * Changed the default value of DCQCN's (Data center- Quantized Congestion Notification) NP parameter min_time_between_cnps to 4 on all devices to support larger scalability of the cluster. * An option to allow applications to build their own QoS tree over the NIC hierarchy by connecting QPs to responder/requestor Queue Groups. * "InfiniBand" properties set to the Network Device Function Redfish object. * HW support for Flow Metering to utilize Advanced Steering Operation (ASO). HW Flow Meter allows higher scale, more accuracy, and better performance compared to the FW Flow Metering. * Trust level for VFs. Once the VF is trusted, it will get a set of trusted capabilities. * 2 new Mini CQE formats: Responder Mini CQE With Flow Tag Layout Responder Mini CQE With l3_l4_info Layout * UCX can now enable AR by exposing Out-Of-Ordering bitmask per SL with "ooo_per_sl" field in the HCA_VPORT context. It can be also queried by running the QUERY_HCA_VPORT_CONTEXT command. * Steering DP hash flow groups. * A new counter per vPort that counts the number of packets that reached the Ethernet RQ but cannot fit into the WQE due to their large size. Additionally, we added the option to control if such packet will cause "CQE with Error" or "CQE_MOCK". * PCIe Rx modifications to prevent the adapter cards from disappearing from the system. * ignore_flow_level is now enabled by the TRUST LEVEL access registry. * cq_overrun counter. The counter represents the number of times CQs enter an error state due to overflow that occur when the device tries to post a CQE into a full CQ buffer. * [Beta] Enabled the capability to allow Virtual Functions to send Pause Frames packets. * Enabled 10/25GbE auto-sensing with 3rd party when using 10/25GbE optical cables. * Hardware steering dump output used for debugging and troubleshooting. - *Following issues have been fixed in firmware version 16.29.1016:** * An issue that prevented VXLAN packets with svlan/ cvlan tag from being matched. * An issue that caused the eth_wqe_too_small counter to count ODP (On-Demand Paging) page faults. * When MKEY_BY_NAME was enabled by NVCONFIG and a large number of VFs are configured, VM restart (VF/PF FLR) will take longer than when MKEY_BY_NAME is disabled. * Ani ssue that resulted in low performance after enabling the RoCE Accelerator capability. Note: The fix is available when all ports are set as Ethernet. * On rare cases, a fatal error related to errors from the PCI transport layer might be reported during FLR. * The chassis manager calculation for Multi-Host and Socket-Direct adapter cards to allow running NC-SI commands by the chassis manager BMC. Now the chassis manager is count as BMC with index 0, regardless of how many BMC there are. * An issue that caused the device to go to down IRISC as one of the firmware semaphores could not be released when a speed change or port state change was triggered. **Following issues have been fixed in firmware version 12.28.1002:** * An issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased. * Increased PHY power consumption limit to 1.5w. * An issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors. - *The following issues have been fixed in version 12.28.2006:** * An issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased. * Increased PHY power consumption limit to 1.5w. * An issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors. **The following issues have been fixed in version 16.31.1014:** * TX PRBS was not changed even after reconfiguring it, all PRBS mode were enabled in test mode. * An assert that was caused when trying to open 1024 functions on the device and the maximum number of functions was 1023. * Occasional performance issues related to RC QPs using E2E-credits (not connected to SRQ and doing send/receive traffic) when the ROCE_ACCL tx_window was enabled. * A fatal error occurred and eventually resulted in the HCA to get into an unresponsive state when a packet was larger than a strided receive WQE that was being scattered. * A rare issue that caused RX pipe to hang. * The resource number size (a 64 bit number) was overwritten with a 32 bit number and erased the high bits when de-allocating the resource number. * CRT_DCR with index larger than 1 << 21 occasionally collided with the CRT_SW_RESERVED address. * An issue that caused the TX queue to get into an unresponsive state when the VF rate limiter was set. **Additional Fixes included in version 16.31.1014:** * Disabled the CNP counter "rp_cnp_ignored " (triggered by OOS (out-of-sequence)) when all ports are IB. * Fixed the TMP421 sensor temperature reporting. * Fixed the rate select mechanism in QSFP modules. * Fixed classification issues for "Passive" cables to be more robust. * Initialized the rate table in the static configuration so it will be configured at the link-not-up scenarios. - This product addresses an issue where the network adapter doesn't properly report increased temperatures, causing potential system shutdown. - This product corrects an issue where the link status is not updated immediately to the switch when network adapter interface is brought down in the Operating System. This product corrects an issue where not all devices are discovered as part of firmware update on a multi-root-complex platforms like Integrity, Superdome, etc. This product corrects an issue where the system hangs with red screen when attempting to update the firmware via 'Firmware Update' feature under the 'System Utilities > Embedded Applications' menu. This product corrects an issue where a firmware update fails. - This product now remove supports Synergy and Blade Server. This product now supports the following operatings systems: * Red Hat Enterprise Linux 7 Update 7 * Red Hat Enterprise Linux 8 Update 0 * SUSE Linux Enterprise Server 15 SP1 - This product addresses an incorrect local sequence number in the Link Layer Discovery Protocol (LLDP). This product addresses an issue where boot mode is not restored to the default value after a factory reset. - This product addresses an Overheat issue that system shuts down automatically due to NIC temperature exceeding threshold. - This product corrects the display problem of the adapter name under RBSU. * This products corrects some issues about the thermal reporting and temperature threadshold control of the adapter. * This product addresses an issue where unexpected UMCE(Uncorrectable Machine Check Exception) appeared when powering on the system with NPAR(Network Partitioning) enabled. - This product addresses an issue where the Firmware installation failure when enabling secure boot under SUSE Linux Enterprise Server 15 SP2. - This product addresses an issue that platform would be randomly waked up by WOL packet. - **This product addressed the firmware update failure problem which may cause NIC FW corruption.** * **This product addressed the firmware update failure problem while the platform secure boot being enabled.** - - Initial release. This product now supports the following operatings systems: * Red Hat Enterprise Linux 7 Update 7 * Red Hat Enterprise Linux 8 Update 0 * SUSE Linux Enterprise Server 15 SP1 - This product addresses an incorrect local sequence number in the Link Layer Discovery Protocol (LLDP). This product addresses an issue where boot mode is not restored to the default value after a factory reset. This product addresses an issue where the F1 help messages "Number of VFs per PF" and "Legacy Boot Protocol" option display incorrectly in Japanese and Simplified Chinese languages. - This product now supports Red Hat Enterprise Linux 7, Updates 8 and 9. This product now supports Red Hat Enterprise Linux 8, Updates 2 and 3. This product now supports SUSE Linux Enterprise Server 12 SP5. This product now supports SUSE Linux Enterprise Server 15 SP2. - This product addresses an issue where powering on the system with any I/O virtualization functionality (NPAR, SR-IOV, etc) enabled results in an Uncorrectable Machine Check Exception (UMCE). This product addresses an issue where the WOL option is displayed on the Human Interface Infrastructure (HII) menu for 534M and 630M mezzanine devices, even though WOL is not supported on those devices. - This product addresses an issue where the Maximum Transmission Unit (MTU) value of iSCSI function port is displayed as 0 bytes in AHS log. - Initial release. - Updated to support Service Pack for ProLiant version 2017.07.0 **Note:** If version 8.4 was previously installed, then it is not necessary to upgrade to version 8.4 (B). - Updated to support Service Pack for ProLiant version 2017.07.0 **Note:** If version 8.4 was previously installed, then it is not necessary to upgrade to version 8.4 (C). - - *General** * Addressed an issue where OA "update iLO all" command fails in an enclosure with maximum Blades. * Addressed an issue where a Warning Alert was wrongly sent when a fan is reseated in an enclosure * Addressed an issue where Remote Syslog logging would fail when OA failover happened in an IPv6 only environment. * Enhanced OA to bring the server from a power throttled state back to normal power state upon an OA reboot to circumvent an unwarranted emergency brake. * Fixed an issue where the Active and Standby OAs can have the same IP address in some rare situations. * Resolved an issue where a Gen9 server's host name gets cleared when the blade is rebooted. * Addressed an issue where server blade Power ON will be delayed in enclosures with OA Firmware Version 4.60 and managed by HPE OneView, when the OA module is reset until OneView refreshes the servers. **Security** The following security vulnerabilities were fixed: * CVE-2016-5387- Addressed a vulnerability which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request. * CVE-2016-2183- Addressed a vulnerability against TLS ciphers with 64bit block size in which makes it easier for remote attackers to obtain cleartext data via an attack against a long-duration encrypted session * CVE-2016-6515 - Addressed a vulnerability in OpenSSH which did not limit password lengths for password authentication, which allows remote attackers to cause a denial of service via a long string. * CVE-2015-8215 - Addressed a vulnerability IPv6 stack which does not validate attempted changes to the MTU value, which allows context-dependent attackers to cause a denial of service. * Addressed issue where in Onboard Administrator was vulnerable to Buffer overflow. * Added the HSTS[HTTP strict transport security] support in OA. * Addressed a memory corruption vulnerability in the post-authentication sshd process. **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8.On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HP Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM ** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPSUM 8.0.0. Please refer to HPSUM 8.0.0 User guide for further details. - Onboard Administrator 4.85 provides support for the following enhancements: **Hardware additions** * HPE D2500sb Storage Blade Features**: additions and changes** **General** * Onboard Administrator has been enhanced to allow configuring an IPv6 address as SNMP EngineID. * Onboard Administrator has been enhanced to allow configuring a user defined SSH port number. This will allow users to configure a non-standard SSH port instead of the default SSH port 22. ** Security** General Data Protection Requirements (GDPR) support added in Onboard Administrator for HPE Embedded Remote Support solution. The HPE passport username will now be stored in an encrypted form. - *General** * Addressed an issue where SNMP trap cpqRackEnclosureManagerLinkUp was not sent after an Onboard Administrator failover. * Addressed online help content issues seen in the previous version of Onboard Administrator. **Security** The following security vulnerabilities were fixed: * CVE-2017-8105 - Addressed a memory corruption vulnerability caused by a buffer overflow. * CVE-2016-10244 - Addressed a vulnerability which might allow a remote attacker to cause denial-of-service via a crafted file. **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HP Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPSUM 8.0.0. Please refer to HPSUM 8.0.0 User guide for further details. **CAC** * In the CAC mode SSH, Telnet and XML Reply protocols will be disabled. * Linked enclosure login will not work if the linked enclosure in CAC mode. * If accurate Service account details are not provided, LDAP user login with certificate will fail. * It is highly recommended to establish a recovery plan before getting started with CAC. If something goes wrong with the OA configuration, the OA may be recovered through the serial port or Insight Display panel and USB KEY. Both methods require physical access to the OA. However, if an LCD PIN has been configured (and forgotten) and local accounts have been disabled or CAC has been incorrectly configured then, the only way to recover is through a serial port. The two most common situations where OA recovery is needed are when LDAP has been configured incorrectly with local accounts disabled or when CAC has been configured without certificate access. **Configurable SSH Port Number ** If a Standby OA is running firmware version less than 4.85 and it is updated to firmware version greater than or equal to 4.85 using synchronize firmware feature from Active OA, after the firmware update and reboot of the Standby OA, SSH port will not open in the configured port number. The work around is to reboot the Standby OA and SSH port will open in the configured port in next boot. This issue will not occur in the case where SSH port is configured to default port 22 in the Active OA. - Onboard Administrator 4.90 provides support for the following enhancements: **Hardware additions** * None Features**: additions and changes** **General** * On SNMP user add/delete, Onboard Administrator has been enhanced to resync with the new configuration instead of restarting SNMP service. * The SCEXE package support has been removed in the Onboard Administrator firmware update and EFM. OA now uses only the RPM package. * The Single Sign-On (SSO) feature has been enhanced to support the Password Complexity feature in the iLO 5 firmware. * The AlertMail feature has been enhanced to include subsystems status in the AlertMail messages. * Onboard Administrator has been enhanced for better debugging of issues. ** Security** * None - *General** * Addressed an issue where Onboard Administrator is not reachable when the port speed changes from 100M to 1000M in auto-negotiation mode. This issue is described by Customer Advisory : [https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=1844065&docLocale=en_US&docId=emr_na-c04866545](https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=1844065&docLocale=en_US&docId=emr_na-c04866545) * Addressed an issue where the DHCPv6 service does not start after an Onboard Administrator reboots causing it to reboot again after 15 minutes. * Addressed an issue related to ssl protocols enable or disable in the Onboard Administrator Command Line Interface (CLI) where proper error message is displayed. When the password entered is less than eight characters, the ambient temperature of the BL460c Gen10 blade is not displayed. * Addressed issues in Onboard Administrator GUI pages related to: 1. Power management 2. Front view display of BL460c Gen10 blade 3. Login feature into linked enclosure and Two-factor authentication * Addressed an issue where syslog messages were not added for dynamic dns setting and LDAP group access changes. * Addressed an issue where SNMP GET for Onboard Administrator system description OID displays a wrong value. * Addressed an issue where Blade Switch 6125G firmware version is not displayed after rebooting OA. * Addressed an issue where Onboard Administrator responds to internal private IP ping requests from management interface. * Addressed the issue of delay in the powering of the blades after an enclosure power cycle in a VCM managed enclosure. * Addressed an issue in the SNMP where power supply OK traps are not sent out after an enclosure power cycle. * Addressed the issues related to user certificate usage in the Onboard Administrator where the same certificate cannot be used for multiple users and checking the syntax of IPv6 address if used in the certificate. * Addressed the issues present in the previous versions of the Onboard Administrator online help. * Addressed an issue in FIPS ON mode where Onboard Administrator CLI will display information about the password requirements when an invalid password in entered by the user. * Fixed an issue related to ambient temperature display of Gen10 blades in Command Line Interface (CLI). * Fixed an issue in First Time Setup Wizard page in GUI where in FIPS ON mode, user will not able to set DEBUG to ON. * Addressed an issue where messages are not logged in syslog when Device and Interconnects bay access are updated for a LDAP group. * Fixed an issue related to Blade part number display in OA GUI and CLI. **Security** The following security vulnerabilities are fixed: * CVE-2018-0732- Addressed the issue where the possibility of a malicious server sending a large prime value to the client from DH (E) based ciphersuite during the key agreement in a TLS handshake resulting in the client to take a long time to generate a key with the prime and exploited in a Denial Of Service attack. * CVE-2018-0737- Addressed the issue of vulnerability of the OpenSSL RSA Key generation algorithm to the cache timing side channel attack. **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HPE Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPE SUM 8.0.0. Please refer to HPE SUM 8.0.0 User guide for further details. **CAC** * In the CAC mode SSH, Telnet and XML Reply protocols will be disabled. * Linked enclosure login will not work if the linked enclosure in CAC mode. * If accurate Service account details are not provided, LDAP user login with certificate will fail. * It is highly recommended to establish a recovery plan before getting started with CAC. If something goes wrong with the OA configuration, the OA may be recovered through the serial port or Insight Display panel and USB KEY. Both methods require physical access to the OA. However, if an LCD PIN has been configured (and forgotten) and local accounts have been disabled or CAC has been incorrectly configured then, the only way to recover is through a serial port. The two most common situations where OA recovery is needed are when LDAP has been configured incorrectly with local accounts disabled or when CAC has been configured without certificate access. **Configurable SSH Port Number ** If a Standby OA is running firmware version less than 4.85 and it is updated to firmware version greater than or equal to 4.85 using synchronize firmware feature from Active OA, after the firmware update and reboot of the Standby OA, SSH port will not open in the configured port number. The work around is to reboot the Standby OA and SSH port will open in the configured port in next boot. This issue will not occur in the case where SSH port is configured to default port 22 in the Active OA. - Onboard Administrator 4.95 provides support for the following enhancements: **Hardware additions** * None Features**: additions and changes** **General** * AlertMail feature now supports two priorities that a user can select for the AlertMail messages.. * Enclosure Firmware Management (EFM) feature is optimized to speed up the EFM update operation. * The SSL certificate of Onboard Administrator now supports Fully Qualified Domain Name (FQDN) in **Common Name (CN) field and IP address in **SAN **field.** * Common Access Card (CAC) Authentication feature is enhanced to support a configurable timeout for the SSL session. ** Security** * Onboard Administrator supports two new TLS_DHE_RSA ciphers * FIPS TOP-SECRET mode ciphers are now supported in FIPS **ON **and **OFF **modes. * CLI commands SHOW SSH CIPHER, ENABLE SSH CIPHER and DISABLE SSH CIPHER are added to Show, Enable and Disable SSH ciphers in FIPS ON and OFF modes. - *General** * Addressed an issue where SNMP queries to Onboard Administrator OIDs were not successfully completed when VLAN is configured for Blades and Interconnects. * Addressed an issue in the Device and Rack Summary GUI page to eliminate the duplicate display of FLB and Mezz adapters information. * Addressed an issue where Interconnects were not receiving IP address from EBIPA (or) external DHCP server. * Addressed an issue where Blade Location information was not displayed correctly in SHOW SERVER STATUS ALL CLI command. * Addressed an issue where DNS record update was getting delayed in DNS server when a user configured a domain name in Onboard Administrator. **Security** * None **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HPE Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPE SUM 8.0.0. Please refer to HPE SUM 8.0.0 User guide for further details. **CAC** * In the CAC mode SSH, Telnet and XML Reply protocols will be disabled. * Linked enclosure login will not work if the linked enclosure in CAC mode. * If accurate Service account details are not provided, LDAP user login with certificate will fail. * It is highly recommended to establish a recovery plan before getting started with CAC. If something goes wrong with the OA configuration, the OA may be recovered through the serial port or Insight Display panel and USB KEY. Both methods require physical access to the OA. However, if an LCD PIN has been configured (and forgotten) and local accounts have been disabled or CAC has been incorrectly configured then, the only way to recover is through a serial port. The two most common situations where OA recovery is needed are when LDAP has been configured incorrectly with local accounts disabled or when CAC has been configured without certificate access. **Configurable SSH Port Number ** If a Standby OA is running firmware version less than 4.85 and it is updated to firmware version greater than or equal to 4.85 using synchronize firmware feature from Active OA, after the firmware update and reboot of the Standby OA, SSH port will not open in the configured port number. The work around is to reboot the Standby OA and SSH port will open in the configured port in next boot. This issue will not occur in the case where SSH port is configured to default port 22 in the Active OA. - Onboard Administrator 4.96 provides support for the following enhancements: **Hardware additions** * None Features**: additions and changes** **General** * AlertMail feature now supports two priorities that a user can select for the AlertMail messages.. * Enclosure Firmware Management (EFM) feature is optimized to speed up the EFM update operation. * The SSL certificate of Onboard Administrator now supports Fully Qualified Domain Name (FQDN) in **Common Name (CN) field and IP address in **SAN **field.** * Common Access Card (CAC) Authentication feature is enhanced to support a configurable timeout for the SSL session. ** Security** * Onboard Administrator supports two new TLS_DHE_RSA ciphers * FIPS TOP-SECRET mode ciphers are now supported in FIPS **ON **and **OFF **modes. * CLI commands SHOW SSH CIPHER, ENABLE SSH CIPHER and DISABLE SSH CIPHER are added to Show, Enable and Disable SSH ciphers in FIPS ON and OFF modes. - *General** * Addressed an issue where SNMP queries to Onboard Administrator OIDs were not successfully completed when VLAN is configured for Blades and Interconnects. * Addressed an issue in the Device and Rack Summary GUI page to eliminate the duplicate display of FLB and Mezz adapters information. * Addressed an issue where Interconnects were not receiving IP address from EBIPA (or) external DHCP server. * Addressed an issue where Blade Location information was not displayed correctly in SHOW SERVER STATUS ALL CLI command. * Addressed an issue where DNS record update was getting delayed in DNS server when a user configured a domain name in Onboard Administrator. **Security** * None **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HPE Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPE SUM 8.0.0. Please refer to HPE SUM 8.0.0 User guide for further details. **CAC** * In the CAC mode SSH, Telnet and XML Reply protocols will be disabled. * Linked enclosure login will not work if the linked enclosure in CAC mode. * If accurate Service account details are not provided, LDAP user login with certificate will fail. * It is highly recommended to establish a recovery plan before getting started with CAC. If something goes wrong with the OA configuration, the OA may be recovered through the serial port or Insight Display panel and USB KEY. Both methods require physical access to the OA. However, if an LCD PIN has been configured (and forgotten) and local accounts have been disabled or CAC has been incorrectly configured then, the only way to recover is through a serial port. The two most common situations where OA recovery is needed are when LDAP has been configured incorrectly with local accounts disabled or when CAC has been configured without certificate access. **Configurable SSH Port Number ** If a Standby OA is running firmware version less than 4.85 and it is updated to firmware version greater than or equal to 4.85 using synchronize firmware feature from Active OA, after the firmware update and reboot of the Standby OA, SSH port will not open in the configured port number. The work around is to reboot the Standby OA and SSH port will open in the configured port in next boot. This issue will not occur in the case where SSH port is configured to default port 22 in the Active OA. - *General** * Addressed an issue where running concurrent UPDATE ILO cli command from different SSH sessions cause few of the commands to end in operation failure. * Fixed an issue in SET SERVER DVD CONNECT cli command usage in IPv6 environment. * Addressed an issue where blade's ProductID update in System Rom RBSU is not reflected in the Onboard Administrator. * Harnessed certificate read operation from flash to minimize certificate read failures. * Fixed an issue in SNMP v3 protocol where EngineTime was not reset on increment of EngineBoot count. * Addressed an issue related to blade discovery failure * Fixed an issue in Smart Component where it fails to establish communication with Onboard Administrator using DHE ciphers. * Addressed an issue related to ECDSA ciphers enable/disable feature. * Added SSH cipher list to the configuration script * Fixed an issue in Onboard Administrator GUI where IPv4 DynamicDNS could not be enabled when enclosure is configured for static IP configuration. * Fixed help message display issues in CLI commands SET SSL_SESSION TIMEOUT and SET SECURESH. * Addressed an issue in SNMP where EngineBoot count was incremented by two for add/delete of trap receiver. * Fixed Online Help (OLH) pages display issue that occur when language pack is uploaded into Onboard Administrator. **Security** The following security vulnerabilities are fixed: * Onboard Administrator's web server response is enhanced to include X-Content-Type-Options security header. * CVE-2011-3026 - libpng: Heap buffer overflow * CVE-2018-1000517 - BusyBox wget version contains a Buffer Overflow vulnerability * CVE-2020-1971 - EDIPARTYNAME NULL pointer de-reference * CVE-2020-15861 - Net-SNMP allows Escalation of Privileges * CVE-2020-15862 - Net-SNMP provides the ability to run arbitrary commands as root. * CVE-2019-20892 - SNMPv3 get bulk request issue **Issues and workarounds** **Browsers** * OA GUI is not accessible in Chrome versions 43.0.2357.10 to 44.0.2383.The issue was caused by a "regression" in Chrome (or WebKit). Customers should use an alternative browser like Firefox or Internet Explorer or try a different version of Chrome. * SSO-to-iLO connection from the OA using an iLO host name fails with Microsoft Internet Explorer11 on Windows 8. On a Windows 8 system with Internet Explorer 10 or Internet Explorer 11, if the OA web GUI session is loaded using a host name instead of an IP address, an attempt to open an iLO window using SSO from the OA web GUI might result in the iLO page loading in the OA web GUI window instead of the intended new window. This issue was determined to be a bug in Internet Explorer and is expected to be fixed in a future release or update for Internet Explorer. To work around this issue, either use an IP address to load the OA Web GUI, or turn off Protected Mode for the appropriate zone in Internet Explorer's settings. This issue occurs only on Internet Explorer browsers. **FIPS** Certificates smaller than 2048 bits in size are not compliant with FIPS requirements as enforced by the OA firmware starting with OA 4.20. When the OA running OA firmware version 4.40 or greater is operating in FIPS Mode ON/DEBUG and is configured with a 1024-bit LDAP certificate that was installed when running a previous version of OA firmware, FIPS Mode ON/DEBUG is considered to be operating in a degraded state due to the presence of the non-compliant certificate. While operating in this FIPS-Degraded Mode operational state, attempts to set FIPS Mode OFF from the OA GUI Network Access>FIPS tab will fail and show the error message The selected FIPS mode is already enabled. When the non-compliant certificate is removed, the FIPS-Degraded operational status is cleared, FIPS Mode can then be successfully set to OFF from the GUI interface. Note that the OA CLI command SET FIPS MODE OFF can be successfully used to set FIPS Mode OFF even with non-compliant 1024-bit LDAP certificates installed in the OA. **IRC** Unable to open .net IRC console for Gen10 Blades, Gen9 Blades also have the same issue. The Java applet and Webstart however, loads but the virtual media mounting fails. The work around is to launch the IRC through IRC Application (HPE Lights-Out Stand Alone Remote Console) which is installed on terminal client. **EFM** To use EFM on Gen 10 Blades, please select options/filters "_Make Bootable ISO file" and _"_Enclosure Firmware Management"_ while creating custom SPP ISO on HPE SUM 8.0.0. Please refer to HPE SUM 8.0.0 User guide for further details. **CAC** * In the CAC mode SSH, Telnet and XML Reply protocols will be disabled. * Linked enclosure login will not work if the linked enclosure in CAC mode. * If accurate Service account details are not provided, LDAP user login with certificate will fail. * It is highly recommended to establish a recovery plan before getting started with CAC. If something goes wrong with the OA configuration, the OA may be recovered through the serial port or Insight Display panel and USB KEY. Both methods require physical access to the OA. However, if an LCD PIN has been configured (and forgotten) and local accounts have been disabled or CAC has been incorrectly configured then, the only way to recover is through a serial port. The two most common situations where OA recovery is needed are when LDAP has been configured incorrectly with local accounts disabled or when CAC has been configured without certificate access. **Configurable SSH Port Number ** ** ** If a Standby OA is running firmware version less than 4.85 and it is updated to firmware version greater than or equal to 4.85 using synchronize firmware feature from Active OA, after the firmware update and reboot of the Standby OA, SSH port will not open in the configured port number. The work around is to reboot the Standby OA and SSH port will open in the configured port in next boot. This issue will not occur in the case where SSH port is configured to default port 22 in the Active OA. **Smart component** When OA is in FIPS ON or FIPS TOP-SECRET mode and any of the ciphers that use Diffie-Hellman (DH) keys are enabled, firmware upgrade or downgrade using OA Smart Component 4.96 or earlier versions may fail with following error: Error: 1013: Client cannot connect with the Onboard Administrator. Verify the target address is correct and can be accessed from your system. FIPS ON TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_RSA_WITH_AES_128_GCM_SHA25 TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 FIPS TOP-SECRET TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 Same error may occur when OA upgrade or downgrade is performed through Smart Update Manager (SUM) resulting in the following error message in the SUM. Component Package Deployment Status Log \---------------------------------------------------------------------------------------------------------------------------------------------------------- cpC39063 Online HPE BladeSystem c-Class Onboard Administrator for Windows Update returned an error View Log When this failure occurs, the following message can be seen in the OA Smart Component log file. Error: 1013: Client cannot connect with the Onboard Administrator. Verify The target address is correct and can be accessed from your system. The work-around for this problem is to disable all the ciphers that use DH key and rerun the firmware upgrade or downgrade. Disabling ciphers can be done using the CLI command DISABLE SSL CIPHER or through the GUI. The disabled ciphers can be re-enabled once the firmware upgrade or downgrade is completed. **ILO5 Firmware Update** The UPDATE ILO command is failing to update the iLO5 firmware versions 2.10 and later on OA version 4.90 and less than 4.90. This issue is caused by the introduction of new signature in the iLO5 firmware version 2.10 . The work-around is to update the OA firmware to 4.95 and then try the UPDATE ILO command. This issue will not occur with OA versions 4.95 and later. - *Important Notes:** None **Firmware Dependencies:** None **Enhancements/New Features:** This is the initial version of the firmware. **Known Issues:** None - *Important Notes:** Ver. 1.0.7(B) addresses a minor issue in the online flashing mechanism. The actual firmware contained within version 1.0.7(B) did not change as compared to version 1.0.7 and therefore it is not necessary to upgrade if version 1.0.7 has already been installed. **Firmware Dependencies:** None **Enhancements/New Features:** This is the initial version of the firmware. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - *Important Notes:** Ver. 1.0.9 (C) contains support for new server products and a change to the Firmware RPM install command name from "cpqsetup" to "hpsetup". It is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to ver. 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - *Important Notes:** Ver. 1.0.9(D) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision D if a previous component Revision was used to upgrade the firmware to version 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - *Important Notes:** Ver. 1.0.9 (F) contains support for new server products. It is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to ver. 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - None - *Important Notes:** Ver. 1.0.9 (G) contains a change to the Firmware RPM file name. It is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision G if a previous component revision was used to upgrade the firmware to ver. 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - *Important Notes:** Ver. 1.0.9(I) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a previous component Revision was used to upgrade the firmware to version 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - *Important Notes:** Ver. 1.0.9(J) contains updates to the component packaging and is functionally equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision J if a previous component Revision was used to upgrade the firmware to version 1.0.9. **Firmware Dependencies:** None **Problems Fixed:** Addresses an issue in which the minimum power capping value was incorrectly being calculated on certain systems. This fix increases the accuracy of the minimum capping value set during POST. **Known Issues:** None - HP Smart Array Px3x controller with HP SmartCache enabled on boot volume could potentially encounter file corruption when booting the system if the Super-cap is not fully charged due to being replaced or being in a power down condition for several days (Example 7 days). File corruption is less likely to occur on non-boot volumes than on boot volumes. For additional information please refer to the customer advisory # [c04719000](http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04719000) - A physical drive configured as a spare drive might indicate predictive failure sooner than expected. * Controller might stop responding during run-time (POST Lockup 0x13). * After hot-plug replacement of a hard disk drive, incorrect hard disk drive firmware version and upgrade recommendation were displayed by HP Smart Storage Administrator. - Detection of all direct-attached physical drives might fail if a single drive did not spin up. * Servers now power up faster due to improvements in the UEFI controller driver. * Reduced likelihood of POST Lockup 0x13 occurrence due to intermittent memory errors. - Increased performance of SATA drives by increasing command queue depth. - System might hang at POST following a reboot. * System fans might go to 100% if connected drives were spun down. * SATA SSD's were incorrectly marked as worn out. - Intermittent memory errors might cause the controller to stop responding. (POST Lockup 0x13) * System might stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13) * In rare cases, the controller might stop responding while running IO without displaying a lockup code. * Non-Maskable Interrupt (NMI) might occur on systems with a Windows OS and HPE Gen9 Smart Array or Smart HBA adapters and performing continuous reboot testing. - If and unexpected power outage occurred, the system might stop operating during Power-On Self Test * Controller could stop responding when Smart Cache is performing a read-ahead after finishing a read-fill for a pending flush operation - DDR cache could be randomly disabled after several boots * A hot-inserted replacement drive might show as a predictive failure if the original drive was identified as a predictive failure. * Controller cache module might be marked as permanently disabled if the Smart Storage Battery is removed or failed while the system is online, even if SSA was previously used to enable write caching without a backup power source. * Controller can become unresponsive due to a SmartCache pending flush operation when a read-ahead and a read-fill are performed in sequent. * System might stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13) * System fans might go to 100% if connected drives were spun down * Issue where a controller crash dump may not be collected after a controller failure - DDR cache could be randomly disabled after several boots * A hot-inserted replacement drive might show as a predictive failure if the original drive was identified as a predictive failure. * Controller cache module might be marked as permanently disabled if the Smart Storage Battery is removed or failed while the system is online, even if SSA was previously used to enable write caching without a backup power source. * Controller can become unresponsive due to a SmartCache pending flush operation when a read-ahead and a read-fill are performed in sequent. * System might stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13) * System fans might go to 100% if connected drives were spun down * Issue where a controller crash dump may not be collected after a controller failure - The firmware updates could fail while SmartCache is enabled due to active I/O in the Smart Cache. * The serial output of the expander could fail to be populated in the controller logs due to the buffer not being handled appropriately by the controller - Added support for ML350, DL380, and DL560 Gen10 servers. - SATA hard disk drives connected to the HPE 12Gb/s SAS Expander card may not be detected when cold booting a HPE ProLiant server with a HPE Smart Array SR Gen10 controller - Changed the Enclosure's Target and LUN address to the appropriate unique values. Previously these addresses would conflict with the SATA drive in bay #1 which interfered with software defined storage solutions such as Storage Spaces Direct. - The following issues are resolved in version 4.21: * Expander may reset during heavy SSACLI polling * SATA drives may take longer to spin up, not be initially detected, and then hot add later. This can prevent system boot or affect the logical drive status. - Fixes an issue where false Smart Carrier authenication errors may happen. - Added support for Gen10 plus UBM type 1/2/3 backplanes - Smart Carrier Authentication Failure issue - Added support for Gen10 plus UBM type 1/2/3 backplanes - Intermittent failures on Smart Carrier authentication - To make Valid flag is always set to true initially so that CRC check can be performed on initstring partition and test if it is really valid. - 1.00 is the initial firmware release - Customers who already installed firmware version 1.00 do not need to update to 1.00 (B). - Improved integration with Smart Update Manager. Note: Upgrading to version 1.00(B) is not necessary if the Apollo 2000 SAS Expander was previously updated to version 1.00. - Customers who already have previous firmware version 1.00 installed do not need to update to 1.00(C). - Added support for SUSE Linux Enterprise Server 15 OS - Fixed an issue in the HPE Apollo 2000 System SAS Expander FW where the HDD Zoning Table would be set to default after upgrading to 1.51 - 1.03 is the initial firmware release - HP Apollo 45xx Gen9 Backplane Expander firmware version 1.04 provides enhanced functionality so that upgrades from version 1.04 to a later version no longer requires a power cycle/cold reboot of the server after the firmware is flashed. NOTE: Upgrading from a firmware version older than version 1.04 to version 1.04 or later still requires a power cycle/cold reboot to complete the upgrade process. - Adds support for the HPE Apollo 4520 Gen9 - Adds support for the HPE Apollo 4520 Gen9 - Enhanced debug capabilities. - Enhanced debug capabilities. * Improved integration with Smart Update Manager. - Customers who already have firmware version 2.08 installed do not need to update to 2.08(B). - Added support for SUSE Linux Enterprise Server 15 - Expander may reset during heavy SSACLI polling * SATA drives may take longer to spin up, not be initially detected, and then hot add later. This can prevent system boot or affect the logical drive status. - Drive may show up missing after a system reboot. - *Enhancements/New Features:** * 1.72 is the initial firmware release - Power cycle/ cold reboot is required after installation for updates to take effect. - *Enhancements/New Features:** * 1.72 is the initial firmware release - When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists. Firmware version 1.73 allows all NVMe supported drives to be recognized and displayed in the server hardware inventory lists. - *Problems Fixed in version 1.73 (B):** * The component installer did not detect the HPE Express Bay Enablement Switch Card, when it was configured in an HP ProLiant DL580 Gen9 Server, and would not proceed with firmware update. **Problems Fixed in version 1.73:** * When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists. Firmware version 1.73 allows all NVMe supported drives to be recognized and displayed in the server hardware inventory lists. - *Problems Fixed in version 1.73 (C):** * During component installation on a system configured with NVIDIA Tesla M2090 GPU, an uncorrectable PCIe error might occur. **Problems Fixed in version 1.73 (B):** * The component installer did not detect the HPE Express Bay Enablement Switch Card, when it was configured in an HP ProLiant DL580 Gen9 Server, and would not proceed with firmware update. **Problems Fixed in version 1.73:** * When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists. Firmware version 1.73 allows all NVMe supported drives to be recognized and displayed in the server hardware inventory lists. - Updated to support Service Pack for ProLiant version 2017.07.0 **Note:** If any version 1.73 was previously installed, then it is not necessary to upgrade to version 1.73 (D). - . - Corrected the temperature status of Seagate NVMe hard drives. - - Under the following conditions, the controller might stop responding: * During POST following an unexpected power event if there was data in the controller cache. * When running I/O to SATA drives. (POST Lockup 0x13) * When using a RAID configuration with strip size of 1024KiB. (POST Lockup 0x13) * When a WRITE SAME command is sent with a buffer size greater than 512 bytes. (POST Lockup 0x13) * In a multi-path environment with nested expanders, the active path to a device might be incorrect following a path failure or restoration. - Fixes the following issues: * DDR cache could be randomly disabled after several boots * The controller could become unresponsive while in HBA mode during the creation of a partition/file system . - Added support for larger SmartCache capacity size - Issue where the QueryAsynchronousEvent could potentially provide incorrect response data * Issue where the Cache could potentially get disable after several reboots - Customers who already installed firmware version 6.60 do not need to update to 6.60 (B). - Releasing support for SUSE LINUX Enterprise Server 15 OS - . - Decrease in Performanceseen in Firmware versions after 4.52 - Fixes the following Issues * SATA drive could stop responding while on HBA mode when non-NCQ commands are executed * Controller could stop responding when upgrading due to the DDR Cache Module exceeding its limitations * SSD Cache module could become disable while upgrading FW * Data from the HPE Smart Drive Backplane could potentially become corrupted if a non-HPE carrier is present - Occasionally the drive will not accept any IO's after running Sanitize command for a period of time due to the FW being out of sync with the drive during that time * Non-HPE drives could report "Task Set Full" due to the drives reaching the qdepth limit during heavy workload * Raid volume is not discovered due to a bad drive consuming two slots during hotplug * Data could become inaccessible when upgrading from firmware versions prior to 4.5x * The controller could stop responding when executing a SCSI verify command due to a CPU exception * The system could stop communicating due to an I/O command timeout * While on HBA mode, a drive could stop responding due to an early allocated buffer release * A SAS drive WWN is reported inaccuratelyy due to an incorrect report causing the driver to be out of sync with the device * If using a 4G module, the controller could stop responding due to the SSD Cache metadata exceeding its limits during a Backup * SSD Smart Cache module become disabled due to a reduction in usable cache space - ***Firmware Dependency:** ** The devices listed below require minimum FW deliverables with HP Storage Manager version 4.0.1.0: **Device, Minimum Recommended Version** * HP D2600/D2700 Disk Enclosure, 0147 * HP 600 Modular Disk System, 3.60 * HP D6000 Disk Enclosure, 2.38 * HP P2000 MSA Array System, TS230P06 * HP Smart Array P711m/P712m Controller, 5.70 * HP Smart Array P721m Controller, 3.54 **Problems Fixed:** * Fixed issue in which the "Create and Assign Zone Group" operation did not display an error message if the required zone group name was blank. * Fixed a rare issue where repeatedly rebooting the switch may cause some drives in the storage enclosure to not be detected. - *Problems Fixed:** The following issues are now resolved: * If the switch was assigned a static IP address using the Onboard Administrator EBIPA feature, then the switch might generate continuous Cold Start SNMP traps and overfill logs. * A storage enclosure flash operation might fail when run from Virtual Storage Manager (VSM) CLI while the GUI was open. * Link rate of a disk was incorrectly displayed in VSM GUI and CLI. * In rare cases, multiple resets of a switch would cause the Smart Array to lockup 0xAB. - **Customers who already installed firmware version 4.1.1.0 do not need to update to 4.1.1.0(B).** - *Enhancements/New Features for FW version 4.1.1.0(B):** * Added component support for x64 operating systems. - *Problems Fixed:** The following issues are now resolved: * If the switch was assigned a static IP address using the Onboard Administrator EBIPA feature, then the switch might generate continuous Cold Start SNMP traps and overfill logs. * A storage enclosure flash operation might fail when run from Virtual Storage Manager (VSM) CLI while the GUI was open. * Link rate of a disk was incorrectly displayed in VSM GUI and CLI. * In rare cases, multiple resets of a switch would cause the Smart Array to lockup 0xAB. - When a HP 6Gb SAS BL Switch is configured with a very large number of physical drive bays (such as, 400 or more) and/or a large number of zone groups (such as, 16 or more), the switch manager GUI may not be able to load the configuration and show enclosure information. - Made changes to firmware to capture more debug information. - Firmware was changed to make it more robust and resilient to handle possible unresponsiveness due to a potential deadlock between multiple processes. If deadlock was to occur, it might cause an inability to establish an SSH session with the switch. - Initial drop for Snap3 - - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** Ver. 2.72 (B) contains updates to the component packaging and is functionally equivalent to ver. 2.72. It is not necessary to upgrade with Revision (B) if a previous component revision was used to upgrade the firmware to ver. 2.72. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS). This includes support for mitigating the following vulnerabilities: CVE-2018-12126 - Microarchitectural Store Buffer Data Sampling, CVE-2018-12130 - Microarchitectural Fill Buffer Data Sampling, CVE-2018-12127 - Microarchitectural Load Port Data Sampling, and CVE-2019-11091 - Microarchitectural Data Sampling Uncacheable Memory. These issues are not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS). This includes support for mitigating the following vulnerabilities: CVE-2018-12126 - Microarchitectural Store Buffer Data Sampling, CVE-2018-12130 - Microarchitectural Fill Buffer Data Sampling, CVE-2018-12127 - Microarchitectural Load Port Data Sampling, and CVE-2019-11091 - Microarchitectural Data Sampling Uncacheable Memory. These issues are not unique to HPE servers. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 4600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. Ver. 2.90_04-29-2021 (B) contains support for Red Hat Enterprise Linux 8 Server. It is functionally equivalent to ver. 2.90_04-29-2021. It is not necessary to upgrade with version 2.90_04-29-2021 (B) if a previous component revision was used to upgrade the firmware to ver. 2.90_04-29-2021. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 4600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This version of the System ROM contains the latest support for Red Hat Enterprise Linux 8.x Server. Ver. 2.76_10-21-2019(B) contains updates to the firmware packaging and is functionally equivalent to ver. 2.76_10-21-2019. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 2.76_10-21-2019. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-0151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** Ver. 2.72 (B) contains updates to the component packaging and is functionally equivalent to ver. 2.72. It is not necessary to upgrade with Revision (B) if a previous component revision was used to upgrade the firmware to ver. 2.72. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS). This includes support for mitigating the following vulnerabilities: CVE-2018-12126 - Microarchitectural Store Buffer Data Sampling, CVE-2018-12130 - Microarchitectural Fill Buffer Data Sampling, CVE-2018-12127 - Microarchitectural Load Port Data Sampling, and CVE-2019-11091 - Microarchitectural Data Sampling Uncacheable Memory. These issues are not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and/or hypervisor updates, provides mitigation for a new group of side channel vulnerabilities known as Microarchitectural Data Sampling (MDS). This includes support for mitigating the following vulnerabilities: CVE-2018-12126 - Microarchitectural Store Buffer Data Sampling, CVE-2018-12130 - Microarchitectural Fill Buffer Data Sampling, CVE-2018-12127 - Microarchitectural Load Port Data Sampling, and CVE-2019-11091 - Microarchitectural Data Sampling Uncacheable Memory. These issues are not unique to HPE servers. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-0151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This version of the System ROM contains the latest support for Red Hat Enterprise Linux 8.x Server. Ver. 2.76_10-21-2019(C) contains updates to the firmware packaging and is functionally equivalent to ver. 2.76_10-21-2019(B) and 2.76_10-21-2019. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 2.76_10-21-2019. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-0151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000016 (CPUID 306F4) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000019 (CPUID 306F4) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - Added support to allow for the ROM Based Setup Utility (RBSU) Power Regulator setting to be set to Static Low or OS Control Mode when the Processor Power and Utilization Support was disabled. Previous ROMs required the Power Regulator to be configured for Static High Mode only. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. Addressed an issue where certain PCIe option cards may not train properly and cause the system to hang during POST. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for CVE-2017-5715, CVE-2019-11135, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, and CVE-2018-11091. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex micro-architectural conditions, executing X87 or AVX or integer divide instructions may results in unpredictable system behavior. This issue is not unique to HPE servers. **Known Issues:** None - See the release document U22_2.86_05_28_2020 in Download Product Binaries page from Product Summary of the firmware product. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for CVE-2020-0528, CVE-2020-0529, CVE-2020-0543, CVE-2020-0548 and CVE-2020-0549. These issues are not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x000000DC (CPUID 506E3) and 0x0000000DE (CPUID 906E9). This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-8696, CVE-2020-8694 and CVE-2020-8695. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-0381 and INTEL-SA-00389. The Intel microcode patches included in this release are versions 0x000000DC (CPUID 506E3) and 0x0000000DE (CPUID 906E9). These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0593. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of Intel microcode. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode: 0x000000E2 (CPUID 506E3). This Intel microcode patch provide mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-8696 and CVE-2020-8698. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00381. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-24512. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-464. The Intel microcode patches included in this release are version 0x000000EA (CPUID 506E3 and CPUID 906E9). These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel sighting CVE-2020-24512. This security vulnerability is documented in Intel Security Advisory INTEL- SA-00463. The Intel microcode patches included in this release are version 0x000000EA (CPUID 506E3) and 0x000000EA (CPUID 906E9). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-8670 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** Ver. 2.60(B) contains updates to the component packaging and is functionally equivalent to ver. 2.60. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.60. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault - OS/SMM (CVE-2018-3620) and L1 Terminal Fault - VMM (CVE-2018-3646) security vulnerabilities. These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis. These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors. Note that this server is NOT vulnerable to L1 Terminal Fault - SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault - OS/SMM (CVE-2018-3620) and L1 Terminal Fault - VMM (CVE-2018-3646) security vulnerabilities. These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis. These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors. Note that this server is NOT vulnerable to L1 Terminal Fault - SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Known Issues:** None - Added support to allow for the ROM Based Setup Utility (RBSU) Power Regulator setting to be set to Static Low or OS Control Mode when the Processor Power and Utilization Support was disabled. Previous ROMs required the Power Regulator to be configured for Static High Mode only. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. Addressed an issue where certain PCIe option cards may not train properly and cause the system to hang during POST. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for CVE-2017-5715, CVE-2019-11135, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, and CVE-2018-11091. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex micro-architectural conditions, executing X87 or AVX or integer divide instructions may results in unpredictable system behavior. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for CVE-2020-0528, CVE-2020-0529, CVE-2020-0543, CVE-2020-0548 and CVE-2020-0549. These issues are not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x000000DC (CPUID 506E3) and 0x0000000DE (CPUID 906E9). This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-8696, CVE-2020-8694 and CVE-2020-8695. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-0381 and INTEL-SA-00389. The Intel microcode patches included in this release are versions 0x000000DC (CPUID 506E3) and 0x0000000DE (CPUID 906E9). These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0593. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of Intel microcode. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode: 0x000000E2 (CPUID 506E3). This Intel microcode patch provide mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-8696 and CVE-2020-8698. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00381. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for security vulnerabilities documented as CVE-2020-24512. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-464. The Intel microcode patches included in this release are version 0x000000EA (CPUID 506E3 and CPUID 906E9). These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel sighting CVE-2020-24512. This security vulnerability is documented in Intel Security Advisory INTEL- SA-00463. The Intel microcode patches included in this release are version 0x000000EA (CPUID 506E3) and 0x000000EA (CPUID 906E9). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-8670 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Enhancements/New Features:** This is the initial version of the firmware. **Known Issues:** None - Added support for the HPE Dynamic SmartArray B140i Option in the BIOS/Platform Configuration (RBSU) Configuration Menu. Added support for Cluster Model and On-Package High-Bandwidth Memory Cache Size menus to the Memory Options in the BIOS/Platform Configuration (RBSU) Configuration Menu. Added support for Intel Xeon Phi processors with Integrated Intel Omni-Path Fabric. Added support for XL2x260w Server. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where the system may become unresponsive on a subsequent boot after an uncorrectable Machine Check Error. Addressed an issue where the system may experience correctable memory errors on some boots. It is recommended that users seeing a high rate of corrected memory errors update to this version of the System ROM before replacing any hardware. **Known Issues:** None - Added support for Trusted Platform Module (TPM) 2.0 Firmware flash updates. For systems configured with the optional TPM 2.0 device, this is the minimum revision of the System ROM required to update TPM firmware. Updated the HPE RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an issue where a system may experience unpredictable system behavior when the embedded memory (MCDRAM) is configured in Cache or Hybrid Memory modes. This issue does not impact systems configured in Flat Memory mode. This issue is not unique to Hewlett Packard Enterprise systems. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM does NOT have issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel's Security Exploit Newsroom, <https://newsroom.intel.com/press-kits/security- exploits-intel-products/>. **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** Ver. 1.60(B) contains updates to the component packaging and is functionally equivalent to ver. 1.60. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 1.60. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM does NOT have issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel's Security Exploit Newsroom, <https://newsroom.intel.com/press-kits/security- exploits-intel-products/>. **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - Added support for Microsoft Windows 2019. This System ROM is the minimum recommended version for use with this operating system version. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. - *Important Notes:** Ver. 2.64(B) contains updates to the component packaging and is functionally equivalent to ver. 2.64. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.64. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue is not unique to HPE servers. Please consult the following advisory for additional details. <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us> **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). This issue only impacts systems configured with Intel Xeon 2600 v4 series processors. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML) when processor C-states are enabled. This issue does not exist when processor C-states are disabled. This issue is not unique to HPE servers. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.70 System ROM. This issue only impacts systems configured with Intel Xeon v4 Series processors. This issue is not unique to HPE servers. - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Addressed an extremely rare issue where a system booting to VMware may experience a PSOD in legacy boot mode. This issue does not impact systems in UEFI boot mode or other operating systems. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-151. This mitigation is only needed for systems that have TXT enabled (TXT is disabled by default). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code support that provides mitigation for CVE-2019-11137. This issue is not unique to HPE servers. **Known Issues:** None - Added support to BIOS/Platform Configuration (RBSU) to allow importing and exporting Secure Boot signature lists as a signed binary file. This is useful to import the Microsoft revocation list binary file into the Secure Boot DBX as found on the UEFI forum at https://uefi.org/revocationlistfile. - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of Intel microcode. The Intel microcode patches included in this release are versions 0x00000044 (CPUID 306F2) and 0x00B00003A (CPUID 406F1). This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-0591 and CVE-2020-0592. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00358. These issues are not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS platform code advisories and security vulnerabilities documented as CVE-2020-8738, CVE-2020-8740, and CVE-2020-8764. These security vulnerabilities are documented in Intel Security Advisory INTEL-SA-00390. These issues are not unique to HPE servers. This version of the System ROM contains an updated UEFI Driver for the SmartArray B140i SATA RAID controller. This update addresses an issue where the system may periodically experience an operating system boot issue such as experiencing a Linux kernel panic on boot. **Known Issues:** None - *Important Notes:** This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigations for the Intel technical sighting referred to as MD Clear. The Intel microcode patches included in this release are version 0x00000046 (CPUID 306F2) and 0x0B00003E (CPUID 406F1). This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the Intel Reference Code which provides mitigations for BIOS advisories and security vulnerabilities documented as CVE-2020-12360 and CVE-2020-12357. These security vulnerabilities are documented in Intel Security Advisory INTEL- SA-00463. These issues are not unique to HPE servers. **Known Issues:** None - *Important Notes:** This System ROM revision replaces the 2.50 revision. An issue was found with the 2.50 revision of the System ROM that may result in a system hang during boot with a messaging indicating "Memory Initialization - complete" with certain memory configurations. The 2.50 revision of the System ROM has been removed from the HPE Support Site. It is highly recommended that any customers using the 2.50 revision of the System ROM upgrade to the 2.52 revision or later. **Firmware Dependencies:** None **Enhancements/New Features:** Added support for Trusted Platform Module (TPM) 2.0 Firmware flash updates. For systems configured with the optional TPM 2.0 device, this is the minimum revision of the System ROM required to update TPM firmware. Addressed an issue where Processor Core Disable may not function properly, such as disabling the wrong number of cores. Updated the HPE RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. **Known Issues:** None - None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM does NOT have issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel's Security Exploit Newsroom, <https://newsroom.intel.com/press-kits /security-exploits-intel-products/>. **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Known Issues:** None - None - *Important Notes:** Ver. 2.60(B) contains updates to the component packaging and is functionally equivalent to ver. 2.60. It is not necessary to upgrade with Revision B if a previous component Revision was used to upgrade the firmware to version 2.60. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault - OS/SMM (CVE-2018-3620) and L1 Terminal Fault - VMM (CVE-2018-3646) security vulnerabilities. These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis. These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors. Note that this server is NOT vulnerable to L1 Terminal Fault - SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault - OS/SMM (CVE-2018-3620) and L1 Terminal Fault - VMM (CVE-2018-3646) security vulnerabilities. These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis. These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors. Note that this server is NOT vulnerable to L1 Terminal Fault - SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. **Known Issues:** None - *Important Notes:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This issue is not unique to HPE servers. This revision of the System ROM includes the latest revision of the UEFI EDK2 support that provides mitigations for a variety of security vulnerabilities. The following vulnerabilities have been addressed in this System ROM release: CVE-2018-3613 CVE-2017-5731, CVE-2017-5732, CVE-2017-5733, CVE-2017-5734, CVE-2017-5735, CVE-2018-3630, CVE-2018-12178, CVE-2018-12179, CVE-2018-12180, CVE-2018-12181, CVE-2018-12182 and CVE-2018-12183. These security vulnerabilities are not unique to HPE servers. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** Updated the Intel processor microcode to the latest version. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Problems Fixed:** This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. The previous microcode was first introduced in the v2.62 System ROM. This issue only impacts systems configured with Intel Xeon D-1500 processors. This issue is not unique to HPE servers. **Known Issues:** None - The list of issues resolved in 4.62 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of enhancements in 4.63 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of issues resolved in 4.63 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of enhancements in 4.75 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of issues resolved in 4.75 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of enhancements in 4.75 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of issues resolved in 4.75 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of enhancements in 4.80 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of issues resolved in 4.80 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - The list of issues resolved in 4.85 version can be found in the HPE Virtual Connect Release Notes at URL**: **<http://www.hpe.com/info/vc/manuals> - ENHANCEMENTS - ENHANCEMENTS - ENHANCEMENTS - ENHANCEMENTS - *The following fix is added in this version:-** -Removed action over FAULT_SENSED bit due to incorrect algorithm. - *Important Notes:** None **Firmware Dependencies:** None **Enhancements/New Features:** This is the initial version of the firmware. **Known Issues:** None - *Important Notes:** None **Firmware Dependencies:** None **Enhancements/New Features:** Ver. 4.1(B) includes minor documentation updates. The Power Management Controller Firmware contained within ver. 4.1(B) is equivalent to the Firmware contained within ver. 4.1. Therefore, it is not necessary to upgrade with ver. 4.1(B), if the Power Management Controller firmware version is 4.1. **Known Issues:** None - *Important Notes:** Ver. 4.1(D) contains updates to the OS installation support for HP Smart Update Manager. The Power Management Controller Firmware contained within Ver. 4.1(D) is Ver. 4.1. Therefore, it is not necessary to upgrade with ver. 4.1(D), if the Power Management Controller firmware version is 4.1. **Firmware Dependencies:** None **Enhancements/New Features:** This is the initial version of the firmware. **Known Issues:** The smart component prompts for reboot unnecessarily when the installation procedure is completed. Reboot is not required after installation for updates to take effect and hardware stability to be maintained. - - *Problems Fixed in 7.02:** * A physical drive configured as a spare drive might indicate predictive failure sooner than expected. * Controller might stop responding during run-time (POST Lockup 0x13). * When drive write-cache is enabled, protocol errors are observed. * After hot-plug replacement of a hard disk drive, incorrect hard disk drive firmware version and upgrade recommendation were displayed by HP Smart Storage Administrator. **Problems Fixed in 7.02 (B):** * Component would fail to install firmware in a system configured with two or more external drive enclosures attached to an HPE Host Bus Adapter H22x. The following message would be reported - "Device appears more than once in tree". The firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HPE Host Bus Adapter H22x. - Disable controller lockup (lockup 0x13) that was caused by rare correctable errors in the controller on-chip memory. - Drive temperatures for SATA drives might not be reported after hot-inserting the drive. - Added more troubleshooting capability, especially for Bloomberg. - Increased performance of SATA drives by increasing command queue depth. - Drive temperatures for SATA drives might not be reported after hot-inserting the drive. * System might hang at POST following a reboot. * System fans might go to 100% if connected drives were spun down. * SATA SSD's were incorrectly marked as worn out. - **Customers who already installed firmware version 8.00 do not need to update to 8.00 (B).** - Updated to support Service Pack for ProLiant version 2017.07.0 **Note:** If version 8.00 was previously installed, then it is not necessary to upgrade to version 8.00 (B). - Updated to support Service Pack for ProLiant version 2017.07.1 **Note:** If version 8.00 was previously installed, then it is not necessary to upgrade to version 8.00 (C). - System can potentially stop responding with no lockup code due to livelock condition where the RAID Stack thread is polling a queue for a completion to be returned by the base code firmware - ENHANCEMENTS - hpasmlited now supports long IML messages. - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. - FIXES - Fixed the following issues: 1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2) broadcast storm occurs. - FIXES - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un responsive due to network storm. - FIXES - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera ture threshold and improperly shut the system down. - ENHANCEMENTS - Added support for Integrated Lights-Out 3 (iLO 3). - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. - Added 64-bit hpbootcfg utility. - FIXES - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. - Fix POSIX-compliancy issue with initscript. - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu tdowns may take an extended amount of time. - ENHANCEMENTS - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'. - ENHNCEMENTS - Prevent logging of the debug messages to the console. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when the system is in stress. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet. - ENHANCEMENTS - FIXES - iLO hpasmlited daemon crash after 2 iLO resets loops. - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN. - Error logs seen in service hp-asrd status. - ENHANCEMENTS - hpasmlited now supports long IML messages. - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. - FIXES - Fixed the following issues: 1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2) broadcast storm occurs. - FIXES - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un responsive due to network storm. - FIXES - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera ture threshold and improperly shut the system down. - ENHANCEMENTS - Added support for Integrated Lights-Out 3 (iLO 3). - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. - Added 64-bit hpbootcfg utility. - FIXES - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. - Fix POSIX-compliancy issue with initscript. - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu tdowns may take an extended amount of time. - ENHANCEMENTS - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'. - ENHNCEMENTS - Prevent logging of the debug messages to the console. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when the system is in stress. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet. - ENHANCEMENTS - FIXES - iLO hpasmlited daemon crash after 2 iLO resets loops. - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN. - Error logs seen in service hp-asrd status. - ENHANCEMENTS - hpasmlited now supports long IML messages. - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. - FIXES - Fixed the following issues: 1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2) broadcast storm occurs. - FIXES - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un responsive due to network storm. - FIXES - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera ture threshold and improperly shut the system down. - ENHANCEMENTS - Added support for Integrated Lights-Out 3 (iLO 3). - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. - Added 64-bit hpbootcfg utility. - FIXES - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. - Fix POSIX-compliancy issue with initscript. - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu tdowns may take an extended amount of time. - ENHANCEMENTS - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'. - ENHNCEMENTS - Prevent logging of the debug messages to the console. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when the system is in stress. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet. - ENHANCEMENTS - FIXES - iLO hpasmlited daemon crash after 2 iLO resets loops. - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN. - Error logs seen in service hp-asrd status. - ENHANCEMENTS - hpasmlited now supports long IML messages. - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. - FIXES - Fixed the following issues: 1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2) broadcast storm occurs. - FIXES - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un responsive due to network storm. - FIXES - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera ture threshold and improperly shut the system down. - ENHANCEMENTS - Added support for Integrated Lights-Out 3 (iLO 3). - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. - Added 64-bit hpbootcfg utility. - FIXES - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. - Fix POSIX-compliancy issue with initscript. - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu tdowns may take an extended amount of time. - ENHANCEMENTS - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'. - ENHNCEMENTS - Prevent logging of the debug messages to the console. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when the system is in stress. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet. - ENHANCEMENTS - FIXES - iLO hpasmlited daemon crash after 2 iLO resets loops. - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN. - Error logs seen in service hp-asrd status. - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Modify SLES init script to report status 7 as skipped - Added X550T recognition to common code - Added X550T thermal sensor support - Minor Makefile fixup to properly depend on destintion directory creation - Use Provides instead of Supplements for compatibility with older rpm - Use new common code with X550T support - Report firmware version on igb devices the same as with ixgbe - Start ocsbbd as part of installation - Accommodate changes to hwmon API - Remove Sageville device IDs from spec file - Add changelog to rpm - 8.4.0 release (Severity: Medium) - ENHANCEMENTS - Added support for Integrated Lights-Out 3 (iLO 3) - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - When SNMP community string is configured as other than public in snmpd.conf file, all the webapp data is now populating in HP System Management Homepage (SMH) for Red Hat Enterprise Linux (RHEL) 6.5. - ENHANCEMENTS - FIXES - FIXES - Fixed an issue where cmahealthd agent may terminate while polling memory on some. - ENHANCEMENTS - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information if the power supply supports error reporting. - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. - Updated the SIM event severity to .informational. after the secure erase is completed. - Added support for HP NC362i Integrated Dual Port. - FIXES - The cmapeerd agent logs the error .sendto() failed. to cma.log file. - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. - The Part Number displayed incorrectly. - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. - The System Id displayed incorrectly on the System Management Homepage (SMH). - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). - The multipath status was displayed as "unknown" when a drive failed. - The failed logical drive status displayed incorrectly during an array move, expansion or shrink. - ENHANCEMENTS - Added support for HP ProLiant G7 Servers. - Added support for Integrated Lights-Out 3 (iLO 3). - Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agent - Improvements to distribution identification including more consistent output and increased support for community and region al distributions. - Added support for Solid State Drives. - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when co nnected to HP SC08Ge Host Bus Adapter. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC542m Dual Port Flex-10 10GbE BL-c Adapter . HP StorageWorks CN1000E Dual Port Converged Network Adapter . HP NC550m Dual Port Flex-10 10GbE BL-c Adapter . HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter . HP NC551i Dual Port FlexFabric 10Gb Network Adapter . HP NC362i Integrated Dual Port Gigabit Server Adapter . HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter - FIXES - Modified the 6064 trap implementation to reflect the correct error. - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. - Modified the script to get the NIC ports details from /sys/class/net. - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat ion instead of subsytem device information. - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H Pcmanic.pp). - ENHANCEMENTS - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC551m Dual Port FlexFabric 10Gb Adapter . HP NC551i Dual Port FlexFabric 10Gb Adapter . HP NC365T 4-port Ethernet Server Adapter . HP NC543i 10Gb 2-port 4X Flex-10 QDR Server Adapter . HP NC553m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552SFP 2-port 10Gb Server Adapter . HP StorageWorks CN1000Q Dual Port Converged Network Adapter . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter - FIXES - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o utput to /dev/null. - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot - ENHANCEMENTS - Added support for the MIBs in the Power Supply Table. - Added support for the MIB that specifies the version of Insight Management Agents running on the system. - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter. - FIXES - Addressed the tape drive not being displayed on the SMH on few configurations. - Displayed the placement correctly for the failed drive after reboot. - On Cmax, net-snmp displayed duplicate registration message on the syslog. - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. - Added support to report USB key/SD card information. - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". - Added Physical Disk Temperature support. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - cmafcad daemon appears to cause segmentation fault. - cmastdeqd daemon appears to cause segmentation fault when removing USB key. - ENHANCEMENTS - FIXES - FIXES - Cmahostd does not ignore nfs4 mount points. - cmahostd triggers NFS auto-mounting and resulted in performance problem. - Files in directories under /var/spool/compaq/hpasm/registry/ have SGID bit set removed. - FIXES - Fixed an issue where cmahealthd agent may terminate while polling memory on some. - ENHANCEMENTS - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information if the power supply supports error reporting. - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. - Updated the SIM event severity to .informational. after the secure erase is completed. - Added support for HP NC362i Integrated Dual Port. - FIXES - The cmapeerd agent logs the error .sendto() failed. to cma.log file. - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. - The Part Number displayed incorrectly. - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. - The System Id displayed incorrectly on the System Management Homepage (SMH). - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). - The multipath status was displayed as "unknown" when a drive failed. - The failed logical drive status displayed incorrectly during an array move, expansion or shrink. - ENHANCEMENTS - Added support for HP ProLiant G7 Servers. - Added support for Integrated Lights-Out 3 (iLO 3). - Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agent - Improvements to distribution identification including more consistent output and increased support for community and region al distributions. - Added support for Solid State Drives. - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when co nnected to HP SC08Ge Host Bus Adapter. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC542m Dual Port Flex-10 10GbE BL-c Adapter . HP StorageWorks CN1000E Dual Port Converged Network Adapter . HP NC550m Dual Port Flex-10 10GbE BL-c Adapter . HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter . HP NC551i Dual Port FlexFabric 10Gb Network Adapter . HP NC362i Integrated Dual Port Gigabit Server Adapter . HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter - FIXES - Modified the 6064 trap implementation to reflect the correct error. - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. - Modified the script to get the NIC ports details from /sys/class/net. - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat ion instead of subsytem device information. - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H Pcmanic.pp). - ENHANCEMENTS - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC551m Dual Port FlexFabric 10Gb Adapter . HP NC551i Dual Port FlexFabric 10Gb Adapter . HP NC365T 4-port Ethernet Server Adapter . HP NC543i 10Gb 2-port 4X Flex-10 QDR Server Adapter . HP NC553m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552SFP 2-port 10Gb Server Adapter . HP StorageWorks CN1000Q Dual Port Converged Network Adapter . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter - FIXES - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o utput to /dev/null. - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot - ENHANCEMENTS - Added support for the MIBs in the Power Supply Table. - Added support for the MIB that specifies the version of Insight Management Agents running on the system. - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter. - FIXES - Addressed the tape drive not being displayed on the SMH on few configurations. - Displayed the placement correctly for the failed drive after reboot. - On Cmax, net-snmp displayed duplicate registration message on the syslog. - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. - Added support to report USB key/SD card information. - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". - Added Physical Disk Temperature support. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - cmafcad daemon appears to cause segmentation fault. - cmastdeqd daemon appears to cause segmentation fault when removing USB key. - ENHANCEMENTS - FIXES - FIXES - Cmahostd does not ignore nfs4 mount points. - cmahostd triggers NFS auto-mounting and resulted in performance problem. - Files in directories under /var/spool/compaq/hpasm/registry/ have SGID bit set removed. - FIXES - Fixed an issue where cmahealthd agent may terminate while polling memory on some. - ENHANCEMENTS - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information if the power supply supports error reporting. - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. - Updated the SIM event severity to .informational. after the secure erase is completed. - Added support for HP NC362i Integrated Dual Port. - FIXES - The cmapeerd agent logs the error .sendto() failed. to cma.log file. - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. - The Part Number displayed incorrectly. - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. - The System Id displayed incorrectly on the System Management Homepage (SMH). - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). - The multipath status was displayed as "unknown" when a drive failed. - The failed logical drive status displayed incorrectly during an array move, expansion or shrink. - ENHANCEMENTS - Added support for HP ProLiant G7 Servers. - Added support for Integrated Lights-Out 3 (iLO 3). - Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agent - Improvements to distribution identification including more consistent output and increased support for community and region al distributions. - Added support for Solid State Drives. - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when co nnected to HP SC08Ge Host Bus Adapter. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC542m Dual Port Flex-10 10GbE BL-c Adapter . HP StorageWorks CN1000E Dual Port Converged Network Adapter . HP NC550m Dual Port Flex-10 10GbE BL-c Adapter . HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter . HP NC551i Dual Port FlexFabric 10Gb Network Adapter . HP NC362i Integrated Dual Port Gigabit Server Adapter . HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter - FIXES - Modified the 6064 trap implementation to reflect the correct error. - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. - Modified the script to get the NIC ports details from /sys/class/net. - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat ion instead of subsytem device information. - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H Pcmanic.pp). - ENHANCEMENTS - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC551m Dual Port FlexFabric 10Gb Adapter . HP NC551i Dual Port FlexFabric 10Gb Adapter . HP NC365T 4-port Ethernet Server Adapter . HP NC543i 10Gb 2-port 4X Flex-10 QDR Server Adapter . HP NC553m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552SFP 2-port 10Gb Server Adapter . HP StorageWorks CN1000Q Dual Port Converged Network Adapter . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter - FIXES - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o utput to /dev/null. - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot - ENHANCEMENTS - Added support for the MIBs in the Power Supply Table. - Added support for the MIB that specifies the version of Insight Management Agents running on the system. - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter. - FIXES - Addressed the tape drive not being displayed on the SMH on few configurations. - Displayed the placement correctly for the failed drive after reboot. - On Cmax, net-snmp displayed duplicate registration message on the syslog. - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. - Added support to report USB key/SD card information. - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". - Added Physical Disk Temperature support. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - cmafcad daemon appears to cause segmentation fault. - cmastdeqd daemon appears to cause segmentation fault when removing USB key. - ENHANCEMENTS - FIXES - FIXES - Cmahostd does not ignore nfs4 mount points. - cmahostd triggers NFS auto-mounting and resulted in performance problem. - Files in directories under /var/spool/compaq/hpasm/registry/ have SGID bit set removed. - FIXES - Fixed an issue where cmahealthd agent may terminate while polling memory on some. - ENHANCEMENTS - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information if the power supply supports error reporting. - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. - Updated the SIM event severity to .informational. after the secure erase is completed. - Added support for HP NC362i Integrated Dual Port. - FIXES - The cmapeerd agent logs the error .sendto() failed. to cma.log file. - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. - The Part Number displayed incorrectly. - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. - The System Id displayed incorrectly on the System Management Homepage (SMH). - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). - The multipath status was displayed as "unknown" when a drive failed. - The failed logical drive status displayed incorrectly during an array move, expansion or shrink. - ENHANCEMENTS - Added support for HP ProLiant G7 Servers. - Added support for Integrated Lights-Out 3 (iLO 3). - Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agent - Improvements to distribution identification including more consistent output and increased support for community and region al distributions. - Added support for Solid State Drives. - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when co nnected to HP SC08Ge Host Bus Adapter. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC542m Dual Port Flex-10 10GbE BL-c Adapter . HP StorageWorks CN1000E Dual Port Converged Network Adapter . HP NC550m Dual Port Flex-10 10GbE BL-c Adapter . HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter . HP NC551i Dual Port FlexFabric 10Gb Network Adapter . HP NC362i Integrated Dual Port Gigabit Server Adapter . HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter - FIXES - Modified the 6064 trap implementation to reflect the correct error. - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. - Modified the script to get the NIC ports details from /sys/class/net. - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat ion instead of subsytem device information. - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H Pcmanic.pp). - ENHANCEMENTS - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file. - Added support and trap support (link up/down message) for the following HP NC-Series: . HP NC551m Dual Port FlexFabric 10Gb Adapter . HP NC551i Dual Port FlexFabric 10Gb Adapter . HP NC365T 4-port Ethernet Server Adapter . HP NC543i 10Gb 2-port 4X Flex-10 QDR Server Adapter . HP NC553m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter . HP NC552SFP 2-port 10Gb Server Adapter . HP StorageWorks CN1000Q Dual Port Converged Network Adapter . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter - FIXES - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o utput to /dev/null. - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot - ENHANCEMENTS - Added support for the MIBs in the Power Supply Table. - Added support for the MIB that specifies the version of Insight Management Agents running on the system. - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter. - FIXES - Addressed the tape drive not being displayed on the SMH on few configurations. - Displayed the placement correctly for the failed drive after reboot. - On Cmax, net-snmp displayed duplicate registration message on the syslog. - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports. - ENHANCEMENTS - Initial release to support Red Hat Enterprise Linux 5 Update 6. - ENHANCEMENTS - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. - Added support to report USB key/SD card information. - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". - Added Physical Disk Temperature support. - ENHANCEMENTS - Added support for HP ProLiant Gen9 Servers. - FIXES - cmafcad daemon appears to cause segmentation fault. - cmastdeqd daemon appears to cause segmentation fault when removing USB key. - ENHANCEMENTS - FIXES - FIXES - Cmahostd does not ignore nfs4 mount points. - cmahostd triggers NFS auto-mounting and resulted in performance problem. - Files in directories under /var/spool/compaq/hpasm/registry/ have SGID bit set removed. - CQ68826: Set limited access file permissions for lock files/dir (Severity: Minor) - CQ73343: Error deleting lock file' message logged in syslog (Severity: Minor) - CQ73669: No support for 5717C0 devid (Severity: Minor) - CQ73746: tg3sd fails to run on RH7.0 (Severity: Minor) - hp-tg3sd-x.x.x.rpm fails to install on SLES11sp3 (Severity: Minor) - CQ73933: tg3sd i586 rpm shows dependency on 64bit libraries (Severity: Minor) - CTRL-20433: ocbb/ocsd - tg3 error return needs a fix (Severity: Critical) - CTRL-20494: Add OCSD/OCBB Enable/Disable messages to var/logs (Severity: Minor) - CTRL-20577: Missing supported devices id information in tg3sd (Severity: Minor) - CTRL-20577: tg3sd does not run under RHEL 7.2 (Severity: Minor) - CTRL-20998: 330i Network information missing in AHS (Severity: Minor) - CTRL-21484: tg3sd daemon has to be started afer rpm installation (Severity: Minor) - CTRL-30412: Add SLES15 support (Severity: Medium) - Initial development - Added support the HPE StoreFabric 84E 4-port Fibre Channel Host Bus Adapter - Added support for HPE StoreFabric SN1200E 1P & 2P, HPE StoreFabric SN1600E 1P & 2P - Added support for HPE Synergy 3530C - Added Obsoletes tag since the rpm has been changed from noarch to x86_64 bit - Initial development - Added support for SN1600Q 1P & 2P devices - Added support for 84Q and 3830C devices - Added Obsoletes tag since the rpm has been changed from noarch to x86_64 bit - v4.5.0 is mainly targeted for iLO 4 2.20 and iLO 3 1.80 - v4.6.0 is mainly targeted for iLO 4 2.20 and iLO 3 1.80 - v5.0.0 is mainly targeted for iLO 5 1.10 - v5.1.0 is mainly targeted for iLO 5 1.15 - v5.2.0 is mainly targeted for iLO 5 1.20 - v5.3.0 is mainly targeted for iLO 5 1.30 - Changes include to select correct libssl.so file when multiple Openssl installed (32-bit and 64-bit) - Changes to remove the low level openSSL calls. -Updated the OpenSSL API calls to support Host's OpenSSL FIPS mode. - Changes to handle multiple OpenSSL library installed. * Fri Apr 21 2017 Linux Storage Driver Team <esc.storagedev@microsemi.com> 3.4.20-100 - Correct multipath failover operation that could fail to work under high IO conditions. - RC build - RC build * Fri Apr 21 2017 Linux Storage Driver Team <esc.storagedev@microsemi.com> 3.4.20-100 - Correct multipath failover operation that could fail to work under high IO conditions. - RC build - RC build - SMH is been improvised with respect to security vulnerabilites - Updated the following components PHP to version php-5.6.11 Openssl to version openssl-1.0.2d Curl to version curl-7.42.1 - SMH is been improvised with respect to security vulnerabilites - Updated the following components PHP to version php-5.5.28 - HP SMH self-signed certificate signature is changed to SHA-2 - SMH is been improvised with respect to security vulnerabilites - HPE Rebranding changes - Updated the following components PHP to version php-5.5.31 cURL to version curl-7.47.0 OpenSSL to version openssl-1.0.2g Libxml2 to version libxml2-2.9.3 - SSL protocol is now configurable through smhconfig cli - SMH is been improvised with respect to security vulnerabilites - Updated the following components PHP to version php-5.5.38 cURL to version curl-7.49.1 OpenSSL to version openssl-1.0.2h Libxml2 to version libxml2-2.9.4 - SSL Cipher Suite is set to TLSv1.2 as default - SMH is been improvised with respect to security vulnerabilites Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience. - Updated the following components PHP to version php-5.6.27 OpenSSL to version openssl-1.0.2k Apache to version httpd-2.4.25 - SMH is been improvised with respect to security vulnerabilities Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience. - Updated the following components PHP to version php-5.6.30 OpenSSL to version openssl-1.0.2k Apache to version httpd-2.4.25 - SMH is been improvised with respect to security vulnerabilities Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience. - Supported the SLES 15 OS Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience. - Updated the following components PHP to version php-5.6.30 OpenSSL to version openssl-1.0.2k Apache to version httpd-2.4.41 - SMH is been improvised with respect to security vulnerabilities and Supported the RHEL 8 OS Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience. - First release - Implement posttrans logic to handle update correctly. - Fix dracut command which incorrectly builds initrd image instead of initramfs image. - First release - Implement posttrans logic to handle update correctly. - Fix dracut command which incorrectly builds initrd image instead of initramfs image. - Release version 4.17.0_k4.12.14_120-1.sles12sp5 - Release version 4.17.0_k4.12.14_94.41-1.sles12sp4 - Release version 4.17.0_k5.3.18_22-1.sles15sp2 - Release version 4.17.0_k5.3.18_57-1.sles15sp3 - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Added RHEL 7 support - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E - Built driver for rhel7 - Built driver for rhel7 - Built driver for rhel8 - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - Changed version to 10.7 - Added support for RHEL 6U8 - Added support for RHEL 7U2 - Added support for SLES12 SP1 - Changed version to 11.0 - Changed version to 11.1 - Added support for RHEL 7U3 - Added support for SLES 12 SP2 - Removed support for RHEL 6U5 - Changed version to 11.2 - Added support for RHEL 6U9 - Added support for RHEL 7U4 - Added support for SLES 12 SP3 - Removed support for RHEL 7U0 - Removed support for SLES 12 SP0 - Changed version to 11.4 - Removed support for RHEL 6U6 - Removed support for RHEL 7U1 - Added support for RHEL 7U5 - Added support for SLES 15 SP0 - Changed version to 12.0 - Removed support for RHEL 6U7 - Removed support for SLES 12 SP1 - Added support for RHEL 6U10 - Added support for RHEL 7U6 - Added support for RHEL 8U0 - Added support for SLES 12 SP4 - Added support for SLES 15 SP1 - Changed version to 12.2 - Removed support for SLES 11 SP3 - Removed support for SLES 11 SP4 - Removed support for RHEL 6U8 - Removed support for RHEL 7U2 - Removed support for RHEL 7U3 - Changed version to 12.4 - Added support for RHEL 7U7 - Added support for RHEL 8U1 - Added support for SLES 12 SP5 - Removed support for RHEL 6U9 - Removed support for RHEL 6U10 - Removed support for RHEL 7U4 - Changed version to 12.6 - Added support for RHEL 7U8 - Added support for RHEL 8U2 - Added support for SLES 15 SP2 - Removed support for SLES 12 SP2 - Removed support for SLES 12 SP3 - Changed version to 12.8 - Initial build - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - This driver fix unexpected error message appears in dmesg when driver is loaded. - This driver fix VF 0 does not show via sysfs, and cannot be removed. - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0 - This driver fixes the issue of restoring all VF-d config on a VF reset. - This driver fixes the issue of mirror rule via VF-d. - This driver fixes the issue of VFD handler function prototypes. - This driver fixes the issue of assuming hardware is at default when that's not always true. - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout. - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly. - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'. - This driver now introduce allow_untagged VF-d attribute. - This driver now add a helper function to validate a vf based on the vf id. - This driver now add a macro for checking if prog_attached exists. - This driver now add client register/unregister to prevent vsi. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver added the "Negotiated" string into the i40e_print_link_message() function. - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS) - This driver remove RDMA VF code from files including VF support. - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call - This driver add support to expose VF stats as part of PF interface ethtool stats. - This driver fix i40e Mirrors not clear after VF remove. - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf - This driver fix an error message appeared like "0000 [#1] SMP PTI" - This driver fix the package traffic queue statistics. - Add SLES15 SP2 support - This driver fix the system might hang when reset. - This driver fix kernel crash in iavf reset path. - This driver fix kernel instability issue under heavy network conditions - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Initial package which is renamed from i40evf driver - Creating CVL SW1.1 release candidate build. - Add SLES15 SP2 support - This driver fix system freezes when trying to create TCs on VF with no more VSIs available. - Add RHEL8.3 support - Add support to compile on Linux kernel >= 5.9.0 - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - Added RHEL 6.8 support - Fix the issue of getting crash dump when loading igb module(modprobe igb) - Fix unable to disable the offload property in rhel6u6 - Added SLES12SP2 support - Added RHEL 7.3 support - Added SLES12SP3 support - Added RHEL 7.4 support - Fix for the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - Fixed build on updated kernels of SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - This driver fixes an issue of driver crash with ethtool command. - This driver fixes an issue of Klocwork hits. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - Add SLES15 SP2 support - Add RHEL8.3 support. - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - IPv6 support for ixgbe driver - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Added RHEL 6.8 support - Fix the issue of unable to dynamically detect SFP module - Added support for Marvell PHY devices - Added new netdev operation to trust the Virtual Function - Added support to check and set the RSS hash and indirection table via ethtool -x/-X parameters - Added new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key - Fix the issue of packets being dropped as spoofed packets in SR-IOV mode - Fix the issue of macvlan interfaces not being able to get link, ixgbevf parent loses link - Fix the issue of ixgbe installation getting corrupted the system's ability to boot from SLES11SP4 - Added SLES12SP2 support - Added RHEL 7.3 support - Fix the issue of Vlan interface in RHEL 6.8 VM on RHEL6.8 host fails to get IP - Fix the issue of PHY stack trace and OS crash creating / allocating VFs. - Fix the issue of Transmit queue stuck [DCB enabled] - Fix the issue of NULL pointer dereference when enabling SRIOV - Fix the issue of cannot set MACVLAN if MAC is set by PF, when VF is trusted - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - Fix the issue of RHEL6.9 64 bit is not able to create Virtual Functions with the sysfs command - This driver updated branding strings from HP to HPE for legacy adapters - This driver fixes the issue of Unable to automatically get link after swapping SFP+ modules of different speeds - This driver fixes the issue of IPV6 magic packet can't wake up - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes linux Kernel panic occurs when assigning an IP address on HVL system with non existing PHY - This driver updated the kernel version infor for SLES12sP3 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support. - Added RHEL7u9 Suppor.t - Added RHEL8u2 Support. - Added RHEL8u3 Support. - Added SLES15SP2 Support. - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down - Fix the issue of typo in ethtool stats - Added RHEL7u7 Support. - Added RHEL8 Support. - Added SLES15SP1 Support. - This driver use macro to handle change in nd_tx_timeout. - Remove irqs only when they are set up - Fix guest OS crashes during VFs resets - Add SLES15 SP2 support - This driver add support for new mailbox communication between PF and VF - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support - Added RHEL8u2 Support - Added SLES15SP2 Support. - Fix the issue of packet loss in Virtual Functions(VF) in cases where Physical Function(PF) interface is brought up after VF. - Added support for Multicast promiscous mode for trusted Virtual Functions - Added SLES12SP2 support - Added RHEL 7.3 support - Fixed the issue of installing ixgbevf corrupts ability of virtual machine to boot from SLES 11 SP4 Tue Jun 21 2016 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.2.2-1 - Added RHEL 6.8 support - Fix the issue of setting of invalid MTU - Added support for ethtool RSS get/set functionality - Fix the issue of No error generated if untrusted VM user tries to set user defined VF MAC address - Added support for HPE Ethernet 10Gb 2-port 562FLR-T Adapter - Added support for HPE Ethernet 10Gb 2-port 562T Adapter - Added SLES12SP3 support - Added RHEL 7.4 support - Fix the issue of sriov_totalvfs reporting incorrect number of supported VFs - This driver fixes the issue of unable to set MTU value more than 1500 in SUSE12SP3 with Intel NICs - This driver fixes the issue of failed to install driver on SLES12SP2 - This driver fixes the Spectre/Meltdown issue. - Added SLES15 Support. - Added RHEL6.10 Support. - Added RHEL7.5 Support. - Added RHEL7u6 Support. - Added SLES12SP4 Support. - This driver fixes the issue of an infinite recursion in device shutdown path due to a corner case when PCIe link was down. - This driver fixes the issue of Link lost in VM on ixgbevf when restoring from freeze or suspend. - This driver fixes the issue when configuring MTU on VF in Guest OS would be failed. - Added RHEL7u7 Support. - Added RHEL8u0 Support. - Added SLES15SP1 Support. - Added RHEL7u8 Support. - Added RHEL7u9 Support. - Added RHEL8u2 Support. - Added RHEL8u3 Support. - Added SLES15SP2 Support. - Release version 4.17.0-1.rhel7u8 - Release version 4.17.0-1.rhel7u9 - Release version 4.17.0-1.rhel8u3 - Release version 4.17.0-1.rhel8u4 - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - first draft - first draft -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - 10.02.01.01.a2-k1 BH 03/04/2021 - ERXXXXXX: qla2xxx: fixes for compilation on RHEL8.4 - ERXXXXXX: qla2xxx: Updated README file for RHEL8.4 - 10.02.01.00.a15-k1 BH 11/12/2020 ERXXXXXX: qla2xxx: Updated README file for new module parameters - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - Add workaround for 5762 MRRS (Severity:Medium) - Update copyright year to 2017 (Severity:Minor) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for 5762 MRRS (Severity:Medium) - Update copyright year to 2017 (Severity:Minor) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for 5762 MRRS (Severity:Medium) - Update copyright year to 2017 (Severity:Minor) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for 5762 MRRS (Severity:Medium) - Update copyright year to 2017 (Severity:Minor) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Initial version. - Release version 4.17.0-106.rhel7u8 - Release version 4.17.0-106.rhel7u9 - Release version 4.17.0-106.rhel8u3 - Release version 4.17.0-106.rhel8u4 - Release version 4.17.0-106.sles12sp4 - Release version 4.17.0-106.sles12sp5 - Release version 4.17.0-106.sles15sp2 - Release version 4.17.0-106.sles15sp3 - Release version 4.9-OFED.4.9.2.2.4.1.1.sles15sp1 - Release version 4.9-OFED.4.9.3.1.6.1.rhel7u8 - Release version 4.9-OFED.4.9.3.1.6.1.rhel7u9 - Release version 4.9-OFED.4.9.3.1.6.1.rhel8u3 - Release version 4.9-OFED.4.9.3.1.6.1.sles12sp4 - Release version 4.9-OFED.4.9.3.1.6.1.sles12sp5 - Release version 4.9-OFED.4.9.3.1.6.1.sles15sp2 - Release version 5.4-OFED.5.4.1.0.3.1.rhel7u8 - Release version 5.4-OFED.5.4.1.0.3.1.rhel7u9 - Release version 5.4-OFED.5.4.1.0.3.1.rhel8u3 - Release version 5.4-OFED.5.4.1.0.3.1.rhel8u4 - Release version 5.4-OFED.5.4.1.0.3.1.sles12sp4 - Release version 5.4-OFED.5.4.1.0.3.1.sles12sp5 - Release version 5.4-OFED.5.4.1.0.3.1.sles15sp2 - Release version 5.4-OFED.5.4.1.0.3.1.sles15sp3 - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules - Added nfsrdma support - Added ibdev2netdev script - Support install macro that removes RPM_BUILD_ROOT - Add mlx4_fc and mlx4_vnic support - Add KMP support - Add weak updates support - Remove FC support - Use one spec for KMP and non-KMP OS's. - Add QoS utils. - Renamed kernel-ib package to mlnx-ofa_kernel-modules -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). -Added Linux SRIOV support -Added iSCSI & FCoE HBA support for specific HP adapters and devices -Added VC4.10 support -Added BCV support -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence. -Allow UDP tunneling offload -Enable IPGRE RSS by default -Support different GRE RSS modes. -Add RH5.10 support. -Add RH6.5 support. -FC-TAPE - Host responds early to a requested resend delay - Linux (70101) -SLES11 MEZ75 IO halt with Nexus reboot tests (70728) -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187) -KVM gso and gro are not working on hv and vm as expected (70506) -SRIOV mtu toggle failure (70530) -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531) -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426) -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263) -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427) -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690) -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627) -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456) - added RH5.11 support. - added RH6.6 & RH6.7 support. - added RH7.0 & RH7.1 support. - added SLES11-SP4 & SLES12 support. - added VLAN filtering offload support. - added Debian GNU/Linux 7 (wheezy) support. - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071). - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309). - RH7.x: Tunneling offload is not enabled (79269). - self test fails on 20G adapter (79295). - VF interface vlan-filtering stopped working (79365). - Fail to force link speed other than 20G in KR2 (77841). - Incorrect asymmetric flow-control behavior (75504). - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590). - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]). - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - UDP packets cannot pass to the upper application (5709). - Out of memory issue when the adapter is reset (5709). - iSCSI offload: Driver displaying incorrect remote port (77842). - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704). - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - Version 8.18.18.0 - Added missing support to configure 1G speed via ethtool - Fixed calculation of number of ooo rx buffers and limit to 16K - Version 8.18.17.0-1 - iWARP - Handle flush completion on unaligned ll2 connection - Add dp_module, dp_level as modparams - Add Kconfig file for upstream builds - Version 8.18.16.0-1 - Fix missing return error code check on call to qedi_setup_int - Modify different module params - Add log message in the driver unload path - Fail all non-timesync related ioctls - Version 8.18.15.0-1 - Added wwpn and wwnn to the FCoE dev-info - Validate chap and mutual chap auth correctly - Version 8.18.14.0-1 - Fix error handling flow in TX path - Fix error handling flow in RX path - Implement get_protocol_tlv_data callback - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - 10.02.01.00.a14-k1 BH 11/06/2020 - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh Change: qla2xxx: Fix crash in qla_nvme_abort_set_option. - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN). Change: qla2xxx: Handle aborts correctly for port undergoing deletion. - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure. - 10.02.02.00.a13-k1 BH 10/28/2020 - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up. - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config Change: qla2xxx: fix N2N + NVME connect retry fail - ER147832: Issue with uSCM Linux with QCC CLI for some configuration Change: qla2xxx: Show event severity only when device state is congested. - ER147824 : scmr_stat sysfs node runs out of memory Change: qla2xxx: Come up with a compact version of scmr_stat - ER147823: NVMe IO is not getting throttled up or down. Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion. - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo. - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters. - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo. - ERXXXXXX: qla2xxx: Move an SCM log under a debug level. - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value. - ERXXXXXX: qla2xxx: Make throttling messages more informative. - 10.02.02.00.a12-k1 SK 10/15/2020 - ER147625: NVMe IO's are failing with Read/Write after LIP reset. Change: qla2xxx:Return EBUSY until the remote port delete finishes. - ER147653: Target side strongswan start/stop, make initiator crashed. Change: qla2xxx: edif: v2 fix double bsg done. - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats. Change: qla2xxx: Clear Sev and NVMe Target Stats. - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored. Change: qla2xxx: Fix Throttling algorithm regression. - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures. Change: qla2xxx: Throttle NVMe I/O commands only. - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode. - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api. - ERXXXXXX: qla2xxx: edif: fix 4byte align. - ERXXXXXX: qla2xxx: edif: fix ELS meta data. - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset. - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear. - 10.02.00.02.a11-k1 BH 10/09/2020 - ER147734 : Lip reset on the isolated port causes server crash Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port. - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed. Change: qla2xxx: Fixes for big endian machines - ER147646: Call Trace observed while validating a MPI Pause test scenario. Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option. - ER147615: Throttling does not work with low I/Os. Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp. - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command. - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing - 10.02.00.02.a10-k1 BH 09/25/2020 SCM Changes: - ERXXXXXX: Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down. qla2xxx: throttling algorithm improvement. qla2xxx: Add throttling support for NVMe targets. EDIF Changes: - ERXXXXX: LUN loss on ipsec stop/start on target side. Change: save Nport on receive of PLOGI - ERXXXXX: fix ELS receive collision between physical and NPIV hosts. Change: remove erroneous source Nport ID search. - ER147570: FCP Performance Drop in latest driver for smaller IOs size. Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure. - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12 Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it. - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. - ER147645: System panic while trying to capture debugfs stats for EED. Change: qla2xxx: Check rport before accessing target number. - ER147632: Fix potential stale mem access Change: remove stale sp pointer reference - CQXXXXXX: FPIN events are not readily decodable. Change: qla2xxx: Make FPIN events prints human readable. - ER146879: Add support to clear SCM Stats Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset. - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only. - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation. - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec. - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command. - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API. - ERXXXXXX: qla2xxx: lockdown: fix stale sp access. - BZ1868688: qla2xxx: tear down session if FW say its down. - 10.02.00.02.a9-k1 BH 09/03/2020 - ER147554 - sg_reset appears hung iterating over too many Qpairs. Change - qla2xxx: limit interrupt vectors to number of cpu. - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed. - ERXXXXX - qla2xxx: Change post del message from debug level to log level. - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test. - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call. - ERXXXXX - Added Structural changes for SCM Phase 2 support. Change : qla2xxx: Update structure definitions for SCM to support backward compatibility. - 10.02.00.02.a8-k1 BH 08/30/2020 - ERXXXXXX - Fix point-to-point (N2N) device discovery issue. Change - qla2xxx: Fix point-to-point (N2N) device discovery issue. - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe. Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe. - ER147523 - BSG stack trace and SCM display issues. Change - SCM: Functional regression with a6 release. - ER 147413 - edif: Fix issue with DIF enable target discovery. Change - qla2xxx: edif: Fix issue with DIF enable target discovery. - ER147480 clear ASYNC_ACTIVE flag to allow relogin. Change - qla2xxx: fix stuck session. - ERXXXXXX - lockdown: add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - 10.02.00.02.a7-k1 BH 08/22/2020 - ER147495 - edif changes Change - qla2xxx: edif: fix nvme discovery failure qla2xxx: edif: fix els corruption. - ERXXXXXX - add mpi flash lock down support Change - qla2xxx: lockdown: add mpi flash lock down support - ERXXXXXX: SCMR changes Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting. qla2xxx: SCM: Changes to segregate current_events and current_state. qla2xxx: SCMR: Increase local array size. - ER147298 : USCM "Congestion Warning" counter regression Change - qla2xxx: Correct FPIN Structure Definition (Severity). - 10.02.00.02.a6-k1 BH 08/13/2020 - ERXXXXXX - fix crash on session cleanup + unload. Change - qla2xxx: fix crash on session cleanup + unload. - ER147329 - edif changes Change - qla2xxx: edif: fix compile error. do not submit qla2xxx: edif: fix double free on ELS send failure. qla2xxx: edif: reject els if non secure device. qla2xxx: edif: reject ELS on session down. qla2xxx: edif: redefine purex dest addr to be more consistent. qla2xxx: edif: tweak debug messages. qla2xxx: edif: fix nvme+edif target connect problem. - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver Change - qla2xxx: edif: move bsg auth els into separate routine. qla2xxx: edif: Fix error in BSG ELS path that has valid response data. - ER147312 - Add support to report MPI FW state. Change - qla2xxx: Add support to report MPI FW state. qla2xxx: Fix reset of MPI firmware. qla2xxx: Fix MPI reset needed message. - 10.02.00.02.a5-k1 BH 07/31/2020 - ER147418: server crash seen when trying to capture the debugfs stat on isolated port. Change - qla2xxx: Don't process target debugfs stats if port is isolated. - ERXXXXXX : Add SCM stats to scmr_stats node. Change - qla2xxx: Add SCM stats to scmr_stats node. - ER147419 : Fix crash due to request q pointer extraction failure. Change - qla2xxx: Latency measurement patch. - ERXXXXXX : edif: remove redundant field in port_id_t Change -qla2xxx: edif: remove redundant field in port_id_t - ER147331 : extract bbc from PLOGI template payload. Change -qla2xxx: Fix buffer-buffer credit extraction error - ERXXXXXX : Split qla2x00_configure_local_loop() Change scsi: qla2xxx: Split qla2x00_configure_local_loop() - ERXXXXXX : SCMR - Add I/O flow control. Change - qla2xxx: SCMR - Add I/O flow control. - 10.02.00.02.a4-k1 BH 07/23/2020 - ER147402 - Do not install nvme auto connect script if OS is installing it. Change - qla2xxx: auto-connect scripts are install based on nvme-cli package. - ERXXXXXX - Fixed return status of nvme fcp request. Change - qla2xxx: Set NVME status code for failed NVME FCP request. - ERXXXXXX - Multi-que support for TMF. Change - qla2xxx: Multi-que support for TMF. - ERXXXXXX ? edif changes Change - qla2xxx: edif: simplify reserve/release of sa_index. qla2xxx: edif: tweak debug log. qla2xxx: edif: adjust ELS resp length. qla2xxx: edif: send logo on app stop. qla2xxx: edif: remove prlo in session deletion. qla2xxx: edif: Fix app stop stall. - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver. Change - qla2xxx: Correct fpin_descriptor definition. qla2xxx: Consolidate EDIF & SCM Purex Calls. - ERXXXXXX - Calculate avg. time taken by different components for IO completion. Change - qla2xxx: Latency measurement patch. - 10.02.00.02.a3-k1 BH 07/16/2020 - ER147348 - Observing the firmware dump while running the qaucli -g post port isolation. Change - qla2xxx: Don't check firmware state in case of chip is down. - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported Change - qla2xxx: Add support for loading external modules on SuSE. - ER147361 - System panic after enabling port isolated during TimeOutReset. Change - qla2xxx: Synchronize the update the host counters using lock. - ER147370 - Hardware Error counter not incrementing for MBX command timeout Change - qla2xxx: Update hardware error count for various error conditions. - ERXXXXXX - The change is to help in debuggging. Change - qla2xxx: Move some messages from debug to normal log level. - ER147346 - Observed a call trace after port isolation. Change - qla2xxx: Fix the call trace for flush workqueue. - ERXXXXXX - For debug purpose Change - qla2xxx: Add error counters to debugfs node - 10.02.00.02.a2-k1 AE 07/10/2020 - ERXXXXXX - qla2xxx: Fix TCM compilation issues. Change - Enabled build of tcm_qla2xxx module and fixed compile issues. - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down. Change - Added wait during app stop. - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events. Change - Driver changes to skip SLER for Async event command. - ER147323 - qla2xxx: Correct the check for sscanf return value. Change - Driver updated to check version correctly. - ERXXXXXX - qla2xxx: v2: Add EDIF support. Change - Refactoring EDIF code for modularity. - ER147298 - Congestion Warning/Alarm counters fail to increment Change - Update driver to increment the counters for congestion signals. - 10.02.00.02.a1-k1 AE 06/29/2020 - qla2xxx: Enable IOCB throttling by default. - qla2xxx: Implementation to get and manage host, target stats and initiator port. - qla2xxx: Add SLER and PI control support. - qla2xxx: Do not log message when reading port speed via sysfs - qla2xxx: fix null pointer access. - qla2xxx: Use MPI hang trigger to do PEGTUNE halt. - qla2xxx: Reduce erroneous error in link reset path - qla2xxx: v2: fix stalled N2N reconnect. - qla2xxx: Fix warnings on SLES12SP5. - qla2xxx: Fix compilation issues on SLES15 - qla2xxx: Compilation Fixes for SLES15SP1. - qla2xxx: Debugfs compilation issue fix for RH7.6. - qla2xxx: Fix gcc test compile error output being printed. - qla2xxx: Timestamp device online and offline transitions. - qla2xxx: Add rport fields in debugfs. - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices. - qla2xxx: Setup debugfs entries for remote ports. - qla2xxx: Fix edif related compilation issue on RH7.6. - Fixes for compilation on hpe branch - qla2xxx: Compilation fixes for RH8.2 - qla2xxx: Compilation changes for RH7.6 - qla2xxx: Fixes for compilation on RH7.x I - qla2xxx: bsg_job to bsg_job_t - qla2xxx: I Unify source code to work with newer kernels. - qla2xxx: Makefile changes from code-uni-devel-10x. - qla2xxx: qla_edif file changes to compile the driver. - qla2xxx: Fix compilation issues. - qla2xxx: Fix Makefile issue. - qla2xxx: fix compile error - qla2xxx: Use explicit LOGO in target mode - qla2xxx: Add EDIF support. - qla2xxx: Addd edif related files. - qla2xxx: Fix MPI failure AEN (8200) handling. - qla2xxx: SCM - Backport optimizations and style changes from upstream work. - qla2xxx: Fix warning in qla_attr.c file. - qla2xxx: Fix nvme compilation error. - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking. - qla2xxx: Fix WARN_ON in qla_nvme_register_hba. - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime. - qla2xxx: Make tgt_port_database available in initiator mode. - qla2xxx: reduce noisy debug message. - qla2xxx: Fix mailbox Ch erroneous error - qla2xxx: fix login timeout. - qla2xxx: Accomodate for SCM FW attribute bit change. - qla2xxx: post FC event (FPIN) to transport FPIN handler. - qla2xxx: Hide fc_host_fpin_rcv kernel dependency. - qla2xxx: Add changes to compile across various kernels. - qla2xxx: Use active targets to update SCM stats. - qla2xxx: Move SCM functions to qla_isr to keep changes local. - qla2xxx: Code to process FLOGI ACC extended payload. - qedf: Fix compilation issue - revisit. - qla2xxx: SCM Phase 1 Implementation + 2 other patches. - qla2xxx: Enable PUREX passthru post ISP reset. - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV. - qla2xxx: performance tweak - scsi: qla2xxx: fix fcport null pointer access. - fixup! qla2xxx: Fix unbound NVME response length. - scsi: qla2xxx: Fix unbound NVME response length - qla2xxx: Add host attribute to trigger MPI hang. - qla2xxx: ONEOFF: silent dbg messages for good path io. - qla2xxx: ONEOFF: fix pDIF detection - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF. - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI - qla2xxx: HPE 3PAR private T10-PI support. - qla2xxx: Check for fabric_priority flag during login - qla2xxx: use iocb_fabric_priority flag - qla2xxx: Fix QoS name and add debug logs - qla2xxx: Correction to tests for iocb fabric and fcport qos. - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table(). - qla2xxx: QoS fcport table index initialization improvement. - qla2xxx: Add QoS fcport table index to speed up search. - qla2xxx: Reduce stack on qos fcport priority routines. - qla2xxx: HPE: Register FDMI QOS - qla2xxx: Add bsg interface for qos lun level bitmask. - qla2xxx: Read E2E QoS fcport priority bitmasks from flash. - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field. - qla2xxx: Add fabric priority qos lun iocb mechanism. - qla2xxx: Implement CT command GFO (Get Fabric Object). - qla2xxx: Add support for fabric priority per target. - qla2xxx: fix mtcp dump collection failure. - qla2xxx: Set Nport ID for N2N - qla2xxx: Fix crash during device discovery. - qla2xxx: Handle NVME status iocb correctly. - qla2xxx: Remove restriction of FC T10-PI and NVME - qla2xxx: serialize fc_port alloc in N2N - qla2xxx: NPIV does not come up after FW dump. - qla2xxx: fix RDP respond data format bug. - qla2xxx: force semaphore on flash validation failure. - qla2xxx: add more FW debug information - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe - qla2xxx: Update BPM enablement semantics. - qla2xxx: fix FW resource print error. - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs. - qla2xxx: Ensure flash updates return possible failure status through bsg interface. - qla2xxx: Improved secure flash support messages - qla2xxx: fix flag passing error - qla2xxx: Use FC generic update firmware options routine for ISP27xx. - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options. - qla2xxX: Add 16.0GT for PCI String - qla2xxx: Use FW_STARTED macro - qla2xxx: Add fixes for mailbox command - qla2xxx: Fix login IOCB flag - qla2xxx: Save rscn_gen for new fcport - qla2xxx: firmware option 3 is clobbered by speed set - qla2xxx: ISP28xx active FW region - qla2xxx: Add portname to print logs in qla24xx_logio_entry(). - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test(). - qla2xxx: Correction to selection of loopback/echo test. - qla2xxx: Use endian macros to assign static fields in fwdump header. - qla2xxx: Add Speed in SFP print information - qla2xxx: Fix RDP response size - qla2xxx: Handle cases for limiting RDP response payload length. - qla2xxx: Add deferred queue for processing ABTS and RDP. - qla2xxx: Cleanup ELS/PUREX iocb fields. - qla2xxx: Add devid's and conditionals for 28xx. - qla2xxx: Add vendor extended FDMI additions and amendments. - qla2xxx: Provide separate RDP enable. - qla2xxx: Add vendor extended RDP additions and amendments. - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP. - qla2xxx: Add 2061 PCI ID - qla2xxx: Remove all DIX-0 references - qla2xxx: Add endianizer macro calls to fc host stats. - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data. - qla2xxx: Move free of fcport out of interrupt context. - qla2xxx: Add beacon LED config sysfs interface. - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect - 10.01.00.22-k AE 06/29/2020 - Upstream driver as part of Linux 5.6 - Please see user documentation for details. (Severity: Low) - Please see user documentation for details. (Severity: Low) - Please see user documentation for details. (Severity: Low) - Add workaround for MRRS of 5762 (Severity:Medium) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for MRRS of 5762 (Severity:Medium) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for MRRS of 5762 (Severity:Medium) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor) - Add workaround for MRRS of 5762 (Severity:Medium) - Add support for RHEL 7.4 and SLES12SP2 (Severity:Medium) - Add support to notify min/max MTUs through min_mtu & max_mtu (Severity:Medium) - Add support to overide clock for 5762 (Severity:Medium) - Backport upstream patches (Severity:Medium) - Add PHY reset workaround in change MTU path for 5717/19/20 (Severity:Medium) - Update the copyright (Severity:Minor) - Add SLES 15 support (Severity:Medium) - Add RHEL 7.5 support (Severity:Medium) - Fix RHEL 6.4 compilation (Severity:Medium) - Add Ubuntu 18.04 support (Severity:Minor) - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor) - Avoid usleep_range() with holding spin lock (Severity:Minor) - Add private ioctl support for register read/write (Severity:Medium) - Add RHEL 8.0 support (Severity:Medium) - Fix Panic with SLES12SP3 (Severity:Minor)