/* * linux/drivers/acorn/scsi/powertec.c * * Copyright (C) 1997-2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This driver is based on experimentation. Hence, it may have made * assumptions about the particular card that I have available, and * may not be reliable! * * Changelog: * 01-10-1997 RMK Created, READONLY version. * 15-02-1998 RMK Added DMA support and hardware definitions. * 15-04-1998 RMK Only do PIO if FAS216 will allow it. * 02-05-1998 RMK Moved DMA sg list into per-interface structure. * 27-06-1998 RMK Changed asm/delay.h to linux/delay.h * 02-04-2000 RMK Updated for new error handling code. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../../scsi/sd.h" #include "../../scsi/hosts.h" #include "fas216.h" #include /* Configuration */ #define POWERTEC_XTALFREQ 40 #define POWERTEC_ASYNC_PERIOD 200 #define POWERTEC_SYNC_DEPTH 7 /* * List of devices that the driver will recognise */ #define POWERTECSCSI_LIST { MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI } #define POWERTEC_FAS216_OFFSET 0xc00 #define POWERTEC_FAS216_SHIFT 4 #define POWERTEC_INTR_STATUS 0x800 #define POWERTEC_INTR_BIT 0x80 #define POWERTEC_RESET_CONTROL 0x406 #define POWERTEC_RESET_BIT 1 #define POWERTEC_TERM_CONTROL 0x806 #define POWERTEC_TERM_ENABLE 1 #define POWERTEC_INTR_CONTROL 0x407 #define POWERTEC_INTR_ENABLE 1 #define POWERTEC_INTR_DISABLE 0 /* * Version */ #define VER_MAJOR 0 #define VER_MINOR 0 #define VER_PATCH 5 static struct expansion_card *ecs[MAX_ECARDS]; /* * Use term=0,1,0,0,0 to turn terminators on/off */ static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 }; #define NR_SG 256 typedef struct { FAS216_Info info; struct { unsigned int term_port; unsigned int terms; } control; /* other info... */ struct scatterlist sg[NR_SG]; /* Scatter DMA list */ } PowerTecScsi_Info; /* Prototype: void powertecscsi_irqenable(ec, irqnr) * Purpose : Enable interrupts on Powertec SCSI card * Params : ec - expansion card structure * : irqnr - interrupt number */ static void powertecscsi_irqenable(struct expansion_card *ec, int irqnr) { unsigned int port = (unsigned int)ec->irq_data; outb(POWERTEC_INTR_ENABLE, port); } /* Prototype: void powertecscsi_irqdisable(ec, irqnr) * Purpose : Disable interrupts on Powertec SCSI card * Params : ec - expansion card structure * : irqnr - interrupt number */ static void powertecscsi_irqdisable(struct expansion_card *ec, int irqnr) { unsigned int port = (unsigned int)ec->irq_data; outb(POWERTEC_INTR_DISABLE, port); } static const expansioncard_ops_t powertecscsi_ops = { powertecscsi_irqenable, powertecscsi_irqdisable, NULL, NULL, NULL, NULL }; /* Prototype: void powertecscsi_terminator_ctl(host, on_off) * Purpose : Turn the Powertec SCSI terminators on or off * Params : host - card to turn on/off * : on_off - !0 to turn on, 0 to turn off */ static void powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off) { PowerTecScsi_Info *info = (PowerTecScsi_Info *)host->hostdata; if (on_off) info->control.terms = POWERTEC_TERM_ENABLE; else info->control.terms = 0; outb(info->control.terms, info->control.term_port); } /* Prototype: void powertecscsi_intr(irq, *dev_id, *regs) * Purpose : handle interrupts from Powertec SCSI card * Params : irq - interrupt number * dev_id - user-defined (Scsi_Host structure) * regs - processor registers at interrupt */ static void powertecscsi_intr(int irq, void *dev_id, struct pt_regs *regs) { struct Scsi_Host *host = (struct Scsi_Host *)dev_id; fas216_intr(host); } /* Prototype: fasdmatype_t powertecscsi_dma_setup(host, SCpnt, direction, min_type) * Purpose : initialises DMA/PIO * Params : host - host * SCpnt - command * direction - DMA on to/off of card * min_type - minimum DMA support that we must have for this transfer * Returns : type of transfer to be performed */ static fasdmatype_t powertecscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp, fasdmadir_t direction, fasdmatype_t min_type) { PowerTecScsi_Info *info = (PowerTecScsi_Info *)host->hostdata; int dmach = host->dma_channel; if (dmach != NO_DMA && (min_type == fasdma_real_all || SCp->this_residual >= 512)) { int bufs = SCp->buffers_residual; int pci_dir, dma_dir; if (bufs) memcpy(info->sg + 1, SCp->buffer + 1, sizeof(struct scatterlist) * bufs); info->sg[0].address = SCp->ptr; info->sg[0].page = NULL; info->sg[0].length = SCp->this_residual; if (direction == DMA_OUT) pci_dir = PCI_DMA_TODEVICE, dma_dir = DMA_MODE_WRITE; else pci_dir = PCI_DMA_FROMDEVICE, dma_dir = DMA_MODE_READ; pci_map_sg(NULL, info->sg, bufs + 1, pci_dir); disable_dma(dmach); set_dma_sg(dmach, info->sg, bufs + 1); set_dma_mode(dmach, dma_dir); enable_dma(dmach); return fasdma_real_all; } /* * If we're not doing DMA, * we'll do slow PIO */ return fasdma_pio; } /* Prototype: int powertecscsi_dma_stop(host, SCpnt) * Purpose : stops DMA/PIO * Params : host - host * SCpnt - command */ static void powertecscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp) { if (host->dma_channel != NO_DMA) disable_dma(host->dma_channel); } /* Prototype: int powertecscsi_detect(Scsi_Host_Template * tpnt) * Purpose : initialises PowerTec SCSI driver * Params : tpnt - template for this SCSI adapter * Returns : >0 if host found, 0 otherwise. */ int powertecscsi_detect(Scsi_Host_Template *tpnt) { static const card_ids powertecscsi_cids[] = { POWERTECSCSI_LIST, { 0xffff, 0xffff} }; int count = 0; struct Scsi_Host *host; tpnt->proc_name = "powertec"; memset(ecs, 0, sizeof (ecs)); ecard_startfind(); while (1) { PowerTecScsi_Info *info; ecs[count] = ecard_find(0, powertecscsi_cids); if (!ecs[count]) break; ecard_claim(ecs[count]); host = scsi_register(tpnt, sizeof (PowerTecScsi_Info)); if (!host) { ecard_release(ecs[count]); break; } host->io_port = ecard_address(ecs[count], ECARD_IOC, ECARD_FAST); host->irq = ecs[count]->irq; host->dma_channel = ecs[count]->dma; info = (PowerTecScsi_Info *)host->hostdata; if (host->dma_channel != NO_DMA) set_dma_speed(host->dma_channel, 180); info->control.term_port = host->io_port + POWERTEC_TERM_CONTROL; info->control.terms = term[count] ? POWERTEC_TERM_ENABLE : 0; powertecscsi_terminator_ctl(host, info->control.terms); info->info.scsi.io_port = host->io_port + POWERTEC_FAS216_OFFSET; info->info.scsi.io_shift= POWERTEC_FAS216_SHIFT; info->info.scsi.irq = host->irq; info->info.ifcfg.clockrate = POWERTEC_XTALFREQ; info->info.ifcfg.select_timeout = 255; info->info.ifcfg.asyncperiod = POWERTEC_ASYNC_PERIOD; info->info.ifcfg.sync_max_depth = POWERTEC_SYNC_DEPTH; info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK; info->info.ifcfg.disconnect_ok = 1; info->info.ifcfg.wide_max_size = 0; info->info.dma.setup = powertecscsi_dma_setup; info->info.dma.pseudo = NULL; info->info.dma.stop = powertecscsi_dma_stop; ecs[count]->irqaddr = (unsigned char *) ioaddr(host->io_port + POWERTEC_INTR_STATUS); ecs[count]->irqmask = POWERTEC_INTR_BIT; ecs[count]->irq_data = (void *) (host->io_port + POWERTEC_INTR_CONTROL); ecs[count]->ops = (expansioncard_ops_t *)&powertecscsi_ops; request_region(host->io_port + POWERTEC_FAS216_OFFSET, 16 << POWERTEC_FAS216_SHIFT, "powertec2-fas"); if (host->irq != NO_IRQ && request_irq(host->irq, powertecscsi_intr, SA_INTERRUPT, "powertec", host)) { printk("scsi%d: IRQ%d not free, interrupts disabled\n", host->host_no, host->irq); host->irq = NO_IRQ; info->info.scsi.irq = NO_IRQ; } if (host->dma_channel != NO_DMA && request_dma(host->dma_channel, "powertec")) { printk("scsi%d: DMA%d not free, DMA disabled\n", host->host_no, host->dma_channel); host->dma_channel = NO_DMA; } fas216_init(host); ++count; } return count; } /* Prototype: int powertecscsi_release(struct Scsi_Host * host) * Purpose : releases all resources used by this adapter * Params : host - driver host structure to return info for. */ int powertecscsi_release(struct Scsi_Host *host) { int i; fas216_release(host); if (host->irq != NO_IRQ) free_irq(host->irq, host); if (host->dma_channel != NO_DMA) free_dma(host->dma_channel); release_region(host->io_port + POWERTEC_FAS216_OFFSET, 16 << POWERTEC_FAS216_SHIFT); for (i = 0; i < MAX_ECARDS; i++) if (ecs[i] && host->io_port == ecard_address(ecs[i], ECARD_IOC, ECARD_FAST)) ecard_release(ecs[i]); return 0; } /* Prototype: const char *powertecscsi_info(struct Scsi_Host * host) * Purpose : returns a descriptive string about this interface, * Params : host - driver host structure to return info for. * Returns : pointer to a static buffer containing null terminated string. */ const char *powertecscsi_info(struct Scsi_Host *host) { PowerTecScsi_Info *info = (PowerTecScsi_Info *)host->hostdata; static char string[100], *p; p = string; p += sprintf(p, "%s ", host->hostt->name); p += fas216_info(&info->info, p); p += sprintf(p, "v%d.%d.%d terminators o%s", VER_MAJOR, VER_MINOR, VER_PATCH, info->control.terms ? "n" : "ff"); return string; } /* Prototype: int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) * Purpose : Set a driver specific function * Params : host - host to setup * : buffer - buffer containing string describing operation * : length - length of string * Returns : -EINVAL, or 0 */ static int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) { int ret = length; if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) { buffer += 12; length -= 12; if (length >= 5 && strncmp(buffer, "term=", 5) == 0) { if (buffer[5] == '1') powertecscsi_terminator_ctl(host, 1); else if (buffer[5] == '0') powertecscsi_terminator_ctl(host, 0); else ret = -EINVAL; } else ret = -EINVAL; } else ret = -EINVAL; return ret; } /* Prototype: int powertecscsi_proc_info(char *buffer, char **start, off_t offset, * int length, int host_no, int inout) * Purpose : Return information about the driver to a user process accessing * the /proc filesystem. * Params : buffer - a buffer to write information to * start - a pointer into this buffer set by this routine to the start * of the required information. * offset - offset into information that we have read upto. * length - length of buffer * host_no - host number to return information for * inout - 0 for reading, 1 for writing. * Returns : length of data written to buffer. */ int powertecscsi_proc_info(char *buffer, char **start, off_t offset, int length, int host_no, int inout) { int pos, begin; struct Scsi_Host *host = scsi_hostlist; PowerTecScsi_Info *info; Scsi_Device *scd; while (host) { if (host->host_no == host_no) break; host = host->next; } if (!host) return 0; if (inout == 1) return powertecscsi_set_proc_info(host, buffer, length); info = (PowerTecScsi_Info *)host->hostdata; begin = 0; pos = sprintf(buffer, "PowerTec SCSI driver version %d.%d.%d\n", VER_MAJOR, VER_MINOR, VER_PATCH); pos += fas216_print_host(&info->info, buffer + pos); pos += sprintf(buffer + pos, "Term : o%s\n", info->control.terms ? "n" : "ff"); pos += fas216_print_stats(&info->info, buffer + pos); pos += sprintf(buffer+pos, "\nAttached devices:\n"); for (scd = host->host_queue; scd; scd = scd->next) { pos += fas216_print_device(&info->info, scd, buffer + pos); if (pos + begin < offset) { begin += pos; pos = 0; } if (pos + begin > offset + length) break; } *start = buffer + (offset - begin); pos -= offset - begin; if (pos > length) pos = length; return pos; } static Scsi_Host_Template powertecscsi_template = { module: THIS_MODULE, proc_info: powertecscsi_proc_info, name: "PowerTec SCSI", detect: powertecscsi_detect, release: powertecscsi_release, info: powertecscsi_info, bios_param: scsicam_bios_param, can_queue: 1, this_id: 7, sg_tablesize: SG_ALL, cmd_per_lun: 1, use_clustering: ENABLE_CLUSTERING, command: fas216_command, queuecommand: fas216_queue_command, eh_host_reset_handler: fas216_eh_host_reset, eh_bus_reset_handler: fas216_eh_bus_reset, eh_device_reset_handler: fas216_eh_device_reset, eh_abort_handler: fas216_eh_abort, use_new_eh_code: 1 }; static int __init powertecscsi_init(void) { scsi_register_module(MODULE_SCSI_HA, &powertecscsi_template); if (powertecscsi_template.present) return 0; scsi_unregister_module(MODULE_SCSI_HA, &powertecscsi_template); return -ENODEV; } static void __exit powertecscsi_exit(void) { scsi_unregister_module(MODULE_SCSI_HA, &powertecscsi_template); } module_init(powertecscsi_init); module_exit(powertecscsi_exit); MODULE_AUTHOR("Russell King"); MODULE_DESCRIPTION("Powertec SCSI driver"); MODULE_PARM(term, "1-8i"); MODULE_PARM_DESC(term, "SCSI bus termination"); MODULE_LICENSE("GPL"); EXPORT_NO_SYMBOLS;