/* bttv-cards.c this file has configuration informations - card-specific stuff like the big tvcards array for the most part Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2001 Gerd Knorr This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define __NO_VERSION__ 1 #include #include #include #include #include #include #include #include "bttvp.h" #include "tuner.h" /* fwd decl */ static void boot_msp34xx(struct bttv *btv, int pin); static void hauppauge_eeprom(struct bttv *btv); static void avermedia_eeprom(struct bttv *btv); static void init_PXC200(struct bttv *btv); #if 0 static void init_tea5757(struct bttv *btv); #endif static void winview_audio(struct bttv *btv, struct video_audio *v, int set); static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set); static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set); static void terratv_audio(struct bttv *btv, struct video_audio *v, int set); static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set); static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set); static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set); static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set); static void windvr_audio(struct bttv *btv, struct video_audio *v, int set); static void rv605_muxsel(struct bttv *btv, unsigned int input); /* config variables */ static int triton1=0; static int vsfx=0; int no_overlay=-1; static unsigned int card[4] = { -1, -1, -1, -1 }; static unsigned int pll[4] = { -1, -1, -1, -1 }; static unsigned int tuner[4] = { -1, -1, -1, -1 }; #ifdef MODULE static unsigned int autoload = 1; #else static unsigned int autoload = 0; #endif static unsigned int gpiomask = -1; static unsigned int audioall = -1; static unsigned int audiomux[5] = { -1, -1, -1, -1, -1 }; /* insmod options */ MODULE_PARM(triton1,"i"); MODULE_PARM_DESC(triton1,"set ETBF pci config bit " "[enable bug compatibility for triton1 + others]"); MODULE_PARM(vsfx,"i"); MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " "[yet another chipset flaw workaround]"); MODULE_PARM(no_overlay,"i"); MODULE_PARM(card,"1-4i"); MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); MODULE_PARM(pll,"1-4i"); MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); MODULE_PARM(tuner,"1-4i"); MODULE_PARM_DESC(tuner,"specify installed tuner type"); MODULE_PARM(autoload,"i"); MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)"); MODULE_PARM(gpiomask,"i"); MODULE_PARM(audioall,"i"); MODULE_PARM(audiomux,"1-5i"); /* kernel args */ #ifndef MODULE static int __init p_card(char *str) { return bttv_parse(str,BTTV_MAX,card); } static int __init p_pll(char *str) { return bttv_parse(str,BTTV_MAX,pll); } static int __init p_tuner(char *str) { return bttv_parse(str,BTTV_MAX,tuner); } __setup("bttv.card=", p_card); __setup("bttv.pll=", p_pll); __setup("bttv.tuner=", p_tuner); int __init bttv_parse(char *str, int max, int *vals) { int i,number,res = 2; for (i = 0; res == 2 && i < max; i++) { res = get_option(&str,&number); if (res) vals[i] = number; } return 1; } #endif /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ static struct CARD { unsigned id; int cardnr; char *name; } cards[] __devinitdata = { { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" }, { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" }, { 0x45000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV/PVR" }, { 0xff000070, BTTV_HAUPPAUGE878, "Osprey-100" }, { 0xff010070, BTTV_HAUPPAUGE878, "Osprey-200" }, { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" }, { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x263610b4, BTTV_STB2, "STB TV PCI FM, P/N 6000704" }, { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCV3/PCI" }, { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCV4/PCI" }, { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV" }, { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" }, { 0x001c11bd, BTTV_PINNACLE, "Pinnacle PCTV Sat" }, { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" }, { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" }, { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" }, { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" }, { 0x1127153b, BTTV_TERRATV, "Terratec TV+" }, { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x010115cb, BTTV_GMV1, "AG GMV1" }, { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM205 PCTV" }, { 0x18501851, BTTV_CHRONOS_VS2, "Flyvideo 98 (LR50)/ Chronos Video Shuttle II" }, { 0x18511851, BTTV_FLYVIDEO98EZ, "Flyvideo 98EZ (LR51)/ CyberMail AV" }, { 0x18521852, BTTV_TYPHOON_TVIEW, "Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" }, { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" }, { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" }, { 0, -1, NULL } }; /* ----------------------------------------------------------------------- */ /* array with description for bt848 / bt878 tv/grabber cards */ struct tvcard bttv_tvcards[] = { { /* ---- card 0x00 ---------------------------------- */ name: " *** UNKNOWN/GENERIC *** ", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, muxsel: { 2, 3, 1, 0}, tuner_type: -1, },{ name: "MIRO PCTV", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: { 2, 0, 0, 0, 10}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Hauppauge (bt848)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 1, 2, 3, 4}, needs_tvaudio: 1, tuner_type: -1, },{ name: "STB", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 4, 0, 2, 3, 1}, no_msp34xx: 1, needs_tvaudio: 1, tuner_type: -1, },{ /* ---- card 0x04 ---------------------------------- */ name: "Intel", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: -1, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 1, 2, 3, 4}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Diamond DTV2000", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 3, muxsel: { 2, 3, 1, 0}, audiomux: { 0, 1, 0, 1, 3}, needs_tvaudio: 1, tuner_type: -1, },{ name: "AVerMedia TVPhone", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 3, muxsel: { 2, 3, 1, 1}, gpiomask: 0x0f, audiomux: { 0x0c, 0x04, 0x08, 0x04, 0}, /* 0x04 for some cards ?? */ needs_tvaudio: 1, tuner_type: -1, audio_hook: avermedia_tvphone_audio, },{ name: "MATRIX-Vision MV-Delta", video_inputs: 5, audio_inputs: 1, tuner: -1, svhs: 3, gpiomask: 0, muxsel: { 2, 3, 1, 0, 0}, audiomux: {0 }, needs_tvaudio: 1, tuner_type: -1, },{ /* ---- card 0x08 ---------------------------------- */ name: "FlyVideo II (Bt848) LR26", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xc00, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0xc00, 0x800, 0x400, 0xc00, 0}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "IXMicro TurboTV", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 3, muxsel: { 2, 3, 1, 1}, audiomux: { 1, 1, 2, 3, 0}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Hauppauge (bt878)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x0f, /* old: 7 */ muxsel: { 2, 0, 1, 1}, audiomux: { 0, 1, 2, 3, 4}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "MIRO PCTV pro", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x3014f, muxsel: { 2, 3, 1, 1}, audiomux: { 0x20001,0x10001, 0, 0,10}, needs_tvaudio: 1, tuner_type: -1, },{ /* ---- card 0x0c ---------------------------------- */ name: "ADS Technologies Channel Surfer TV", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: { 13, 14, 11, 7, 0, 0}, needs_tvaudio: 1, tuner_type: -1, },{ name: "AVerMedia TVCapture 98", video_inputs: 3, audio_inputs: 4, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: { 13, 14, 11, 7, 0, 0}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "Aimslab Video Highway Xtreme (VHX)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */ needs_tvaudio: 1, tuner_type: -1, },{ name: "Zoltrix TV-Max", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: {0 , 0, 1 , 0, 10}, needs_tvaudio: 1, tuner_type: -1, },{ /* ---- card 0x10 ---------------------------------- */ name: "Pixelview PlayTV (bt878)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x01fe00, muxsel: { 2, 3, 1, 1}, audiomux: { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "Leadtek WinView 601", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x8300f8, muxsel: { 2, 3, 1, 1,0}, audiomux: { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007}, needs_tvaudio: 1, tuner_type: -1, audio_hook: winview_audio, has_radio: 1, },{ name: "AVEC Intercapture", video_inputs: 3, audio_inputs: 2, tuner: 0, svhs: 2, gpiomask: 0, muxsel: {2, 3, 1, 1}, audiomux: {1, 0, 0, 0, 0}, needs_tvaudio: 1, tuner_type: -1, },{ name: "LifeView FlyKit w/o Tuner", video_inputs: 3, audio_inputs: 1, tuner: -1, svhs: -1, gpiomask: 0x8dff00, muxsel: { 2, 3, 1, 1}, audiomux: { 0 }, no_msp34xx: 1, tuner_type: -1, },{ /* ---- card 0x14 ---------------------------------- */ name: "CEI Raffles Card", video_inputs: 3, audio_inputs: 3, tuner: 0, svhs: 2, muxsel: {2, 3, 1, 1}, tuner_type: -1, },{ name: "Lucky Star Image World ConferenceTV", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x00fffe07, muxsel: { 2, 3, 1, 1}, audiomux: { 131072, 1, 1638400, 3, 4}, needs_tvaudio: 1, pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL_I, },{ name: "Phoebe Tv Master + FM (CPH050)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xc00, muxsel: { 2, 3, 1, 1}, audiomux: {0, 1, 0x800, 0x400, 0xc00, 0}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Modular Technology MM205 PCTV, bt878", video_inputs: 2, audio_inputs: 1, tuner: 0, svhs: -1, gpiomask: 7, muxsel: { 2, 3 }, audiomux: { 0, 0, 0, 0, 0 }, no_msp34xx: 1, pll: PLL_28, tuner_type: TUNER_ALPS_TSBB5_PAL_I, },{ /* ---- card 0x18 ---------------------------------- */ name: "[many vendors] CPH05X/06X (bt878)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xe00, muxsel: { 2, 3, 1, 1}, audiomux: {0x400, 0x400, 0x400, 0x400, 0xc00}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "Terratec/Vobis TV-Boostar", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 16777215, muxsel: { 2, 3, 1, 1}, audiomux: { 131072, 1, 1638400, 3,4}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Newer Hauppauge WinCam (bt878)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 3, gpiomask: 7, muxsel: { 2, 0, 1, 1}, audiomux: { 0, 1, 2, 3, 4}, needs_tvaudio: 1, tuner_type: -1, },{ name: "MAXI TV Video PCI2", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xffff, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 1, 2, 3, 0xc00}, needs_tvaudio: 1, tuner_type: TUNER_PHILIPS_SECAM, },{ /* ---- card 0x1c ---------------------------------- */ name: "Terratec TerraTV+", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x70000, muxsel: { 2, 3, 1, 1}, audiomux: { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000}, needs_tvaudio: 1, tuner_type: TUNER_PHILIPS_PAL, audio_hook: terratv_audio, },{ /* Jannik Fritsch */ name: "Imagenation PXC200", video_inputs: 5, audio_inputs: 1, tuner: -1, svhs: 1, /* was: 4 */ gpiomask: 0, muxsel: { 2, 3, 1, 0, 0}, audiomux: { 0 }, needs_tvaudio: 1, tuner_type: -1, },{ name: "FlyVideo 98", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x1800, //0x8dfe00 muxsel: {2, 3, 1, 1}, audiomux: { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, needs_tvaudio: 1, tuner_type: -1, },{ name: "iProTV", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 1, muxsel: { 2, 3, 1, 1}, audiomux: { 1, 0, 0, 0, 0 }, tuner_type: -1, },{ /* ---- card 0x20 ---------------------------------- */ name: "Intel Create and Share PCI", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 4, 4, 4, 4, 4}, needs_tvaudio: 1, tuner_type: -1, },{ name: "Terratec TerraTValue", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xffff00, muxsel: { 2, 3, 1, 1}, audiomux: { 0x500, 0, 0x300, 0x900, 0x900}, needs_tvaudio: 1, pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL, },{ name: "Leadtek WinFast 2000", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xc33000, muxsel: { 2, 3, 1, 1,0}, audiomux: { 0x422000,0x001000,0x621100,0x620000,0x800000,0x620000}, needs_tvaudio: 0, pll: PLL_28, tuner_type: -1, audio_hook: winfast2000_audio, },{ name: "Flyvideo 98 (LR50Q) / Chronos Video Shuttle II", video_inputs: 3, audio_inputs: 3, tuner: 0, svhs: 2, gpiomask: 0x1800, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ /* ---- card 0x24 ---------------------------------- */ name: "Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner", video_inputs: 3, audio_inputs: 3, tuner: 0, svhs: 2, gpiomask: 0x1800, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, has_radio: 1, },{ name: "PixelView PlayTV pro", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xff, muxsel: { 2, 3, 1, 1 }, audiomux: { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, no_msp34xx: 1, pll: PLL_28, tuner_type: -1, },{ name: "TView99 CPH06X", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x551e00, muxsel: { 2, 3, 1, 0}, audiomux: { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "Pinnacle PCTV Studio/Rave", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x03000F, muxsel: { 2, 3, 1, 1}, audiomux: { 2, 0, 0, 0, 1}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ /* ---- card 0x28 ---------------------------------- */ name: "STB2", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 3, 1, 1}, audiomux: { 4, 0, 2, 3, 1}, no_msp34xx: 1, needs_tvaudio: 1, tuner_type: -1, },{ name: "AVerMedia TVPhone 98", video_inputs: 3, audio_inputs: 4, tuner: 0, svhs: 2, gpiomask: 12, muxsel: { 2, 3, 1, 1}, audiomux: { 13, 4, 11, 7, 0, 0}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, has_radio: 1, },{ name: "ProVideo PV951", /* pic16c54 */ video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0, 0, 0, 0}, no_msp34xx: 1, pll: PLL_28, tuner_type: 1, },{ name: "Little OnAir TV", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xe00b, muxsel: {2, 3, 1, 1}, audiomux: {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc}, no_msp34xx: 1, tuner_type: -1, },{ /* ---- card 0x2c ---------------------------------- */ name: "Sigma TVII-FM", video_inputs: 2, audio_inputs: 1, tuner: 0, svhs: -1, gpiomask: 3, muxsel: {2, 3, 1, 1}, audiomux: {1, 1, 0, 2, 3}, no_msp34xx: 1, pll: PLL_NONE, tuner_type: -1, },{ name: "MATRIX-Vision MV-Delta 2", video_inputs: 5, audio_inputs: 1, tuner: -1, svhs: 3, gpiomask: 0, muxsel: { 2, 3, 1, 0, 0}, audiomux: {0 }, no_msp34xx: 1, pll: PLL_28, tuner_type: -1, },{ name: "Zoltrix Genie TV/FM", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xbcf03f, muxsel: { 2, 3, 1, 1}, audiomux: { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f}, no_msp34xx: 1, pll: PLL_28, tuner_type: 21, },{ name: "Terratec TV/Radio+", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x1f0000, muxsel: { 2, 3, 1, 1}, audiomux: { 0xe2ffff, 0xebffff, 0, 0, 0xe0ffff, 0xe2ffff }, needs_tvaudio: 1, no_msp34xx: 1, pll: PLL_35, tuner_type: 1, has_radio: 1, },{ /* ---- card 0x30 ---------------------------------- */ name: "Dynalink Magic TView ", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: {2,0,0,0,1}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ name: "GV-BCTV3", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x010f00, muxsel: {2, 3, 0, 0}, audiomux: {0x10000, 0, 0x10000, 0, 0, 0}, no_msp34xx: 1, pll: PLL_28, tuner_type: TUNER_ALPS_TSHC6_NTSC, audio_hook: gvbctv3pci_audio, },{ name: "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 3, gpiomask: 0xAA0000, muxsel: { 2,3,1,1 }, audiomux: { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, no_msp34xx: 1, pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL_I, },{ name: "Eagle Wireless Capricorn2 (bt878A)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 7, muxsel: { 2, 0, 1, 1}, audiomux: { 0, 1, 2, 3, 4}, pll: PLL_28, tuner_type: -1 /* TUNER_ALPS_TMDH2_NTSC */, },{ /* ---- card 0x34 ---------------------------------- */ /* David Härdeman */ name: "Pinnacle PCTV Studio Pro", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x03000F, muxsel: { 2, 3, 1, 1}, audiomux: { 1, 0x10001, 0, 0, 10}, needs_tvaudio: 1, pll: PLL_28, tuner_type: -1, },{ /* Claas Langbehn , Sven Grothklags */ name: "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", video_inputs: 3, audio_inputs: 3, tuner: 0, svhs: 2, gpiomask: 0x1c, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0, 0x10, 8, 4 }, needs_tvaudio: 1, pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL_I, has_radio: 1, },{ /* Tim Röstermundt in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff options tuner type=5 */ name: "Lifetec LT 9415 TV (LR90 Rev.F)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x18e0, muxsel: { 2, 3, 1, 1}, audiomux: { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, /* 0x0000: Tuner normal stereo 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 0x0880: Tuner A2 stereo */ pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL, audio_hook: lt9415_audio, has_radio: 1, },{ /* Miguel Angel Alvarez old Easy TV BT848 version (model CPH031) */ name: "BESTBUY Easy TV (CPH031)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xF, muxsel: { 2, 3, 1, 0}, audiomux: { 2, 0, 0, 0, 10}, needs_tvaudio: 0, pll: PLL_28, tuner_type: TUNER_TEMIC_PAL, },{ /* ---- card 0x38 ---------------------------------- */ /* Gordon Heydon */ name: "GrandTec 'Grand Video Capture' (Bt848)", video_inputs: 2, audio_inputs: 0, tuner: -1, svhs: 1, gpiomask: 0, muxsel: { 3, 1 }, audiomux: { 0 }, needs_tvaudio: 0, no_msp34xx: 1, pll: PLL_35, tuner_type: -1, },{ /* Daniel Herrington */ name: "Phoebe TV Master Only (No FM) CPH060", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xe00, muxsel: { 2, 3, 1, 1}, audiomux: { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, needs_tvaudio: 1, pll: PLL_NONE, tuner_type: TUNER_TEMIC_4036FY5_NTSC, },{ /* Matti Mottus */ name: "TV Capturer (CPH03X)", video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x03000F, muxsel: { 2, 3, 1, 0}, audiomux: { 2,0,0,0,1 }, pll: PLL_28, tuner_type: 0, },{ /* ---- card 0x3c ---------------------------------- */ /* Philip Blundell */ name: "Modular Technology MM100PCTV", video_inputs: 2, audio_inputs: 2, gpiomask: 11, muxsel: { 2, 3, 1, 1}, audiomux: { 2, 0, 0, 1, 8}, pll: PLL_NONE, tuner_type: TUNER_TEMIC_PAL, },{ /* Adrian Cox new Easy TV BT878 version (model CPH061) special thanks to Informatica Mieres for providing the card */ name: "BESTBUY Easy TV (bt878)", video_inputs: 3, audio_inputs: 2, tuner: 0, svhs: 2, gpiomask: 0xFF, muxsel: { 2, 3, 1, 0}, audiomux: { 1, 0, 4, 4, 9}, needs_tvaudio: 0, pll: PLL_28, tuner_type: TUNER_PHILIPS_PAL, },{ /* Lukas Gebauer */ name: "ATI TV-Wonder", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0xf03f, muxsel: { 2, 3, 1, 0 }, audiomux: { 0xbffe, 0, 0xbfff, 0, 0xbffe}, pll: PLL_28, tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL, },{ /* ---- card 0x40 ---------------------------------- */ /* Lukas Gebauer */ name: "ATI TV-Wonder VE", video_inputs: 2, audio_inputs: 1, tuner: 0, svhs: -1, gpiomask: 1, muxsel: { 2, 3, 0, 1}, audiomux: { 0, 0, 1, 0, 0}, no_msp34xx: 1, pll: PLL_28, tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL, },{ /* DeeJay */ name: "GV-BCTV4/PCI", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x010f00, muxsel: {2, 3, 0, 0}, audiomux: {0x10000, 0, 0x10000, 0, 0, 0}, no_msp34xx: 1, pll: PLL_28, tuner_type: TUNER_SHARP_2U5JF5540_NTSC, audio_hook: gvbctv3pci_audio, },{ /* ---- card 0x44 ---------------------------------- */ name: "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)", // try "insmod msp3400 simple=0" if you have // sound problems with this card. video_inputs: 4, audio_inputs: 1, tuner: 0, svhs: -1, gpiomask: 0x4f8a00, // 0x100000: 1=MSP enabled (0=disable again) // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) audiomux: {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, // tvtuner, radio, external,internal, mute, stereo /* tuner, Composit, SVid, Composit-on-Svid-adapter*/ muxsel: { 2, 3 ,0 ,1}, tuner_type: TUNER_MT2032, pll: PLL_28, has_radio: 1, },{ /* Philip Blundell */ name: "Active Imaging AIMMS", video_inputs: 1, audio_inputs: 0, tuner: -1, tuner_type: -1, pll: PLL_28, muxsel: { 2 }, gpiomask: 0 },{ /* Tomasz Pyra */ name: "PV-BT878P+", video_inputs: 3, audio_inputs: 4, tuner: 0, svhs: 2, gpiomask: 15, muxsel: { 2, 3, 1, 1}, audiomux: { 0, 0, 11, 7, 13, 0}, needs_tvaudio: 1, pll: PLL_28, tuner_type: 25, },{ name: "Flyvideo 98EZ (capture only)", video_inputs: 4, audio_inputs: 0, tuner: -1, svhs: 2, muxsel: { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS pll: PLL_28, no_msp34xx: 1, },{ /* ---- card 0x48 ---------------------------------- */ /* Dariusz Kowalewski */ name: "Prolink PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x3f, muxsel: { 2, 3, 0, 1 }, audiomux: { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, needs_tvaudio: 1, no_msp34xx: 1, no_tda9875: 1, pll: PLL_28, tuner_type: -1, audio_hook: pvbt878p9b_audio, has_radio: 1, },{ /* Clay Kunz */ /* you must jumper JP5 for the card to work */ name: "Sensoray 311", video_inputs: 5, audio_inputs: 0, tuner: -1, svhs: 4, gpiomask: 0, muxsel: { 2, 3, 1, 0, 0}, audiomux: { 0 }, needs_tvaudio: 0, tuner_type: -1, },{ /* Miguel Freitas */ name: "RemoteVision MX (RV605)", video_inputs: 16, audio_inputs: 0, tuner: 0, svhs: 0, gpiomask: 0x00, gpiomask2: 0x07ff, muxsel: { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, no_msp34xx: 1, no_tda9875: 1, tuner_type: -1, muxsel_hook: rv605_muxsel, },{ name: "Powercolor MTV878/ MTV878R/ MTV878F", video_inputs: 3, audio_inputs: 2, svhs: 2, gpiomask: 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset muxsel: { 2, 1, 1, }, audiomux: { 0, 1, 2, 2, 4 }, needs_tvaudio: 0, tuner_type: TUNER_PHILIPS_PAL, pll: PLL_28, has_radio: 1, },{ /* ---- card 0x4c ---------------------------------- */ /* Masaki Suzuki */ name: "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", video_inputs: 3, audio_inputs: 1, tuner: 0, svhs: 2, gpiomask: 0x140007, muxsel: { 2, 3, 1, 1 }, audiomux: { 0, 1, 2, 3, 4, 0 }, tuner_type: TUNER_PHILIPS_NTSC, audio_hook: windvr_audio, },{ name: "GrandTec Multi Capture Card (Bt878)", video_inputs: 4, audio_inputs: 0, tuner: -1, svhs: -1, gpiomask: 0, muxsel: { 2, 3, 1, 0 }, audiomux: { 0 }, needs_tvaudio: 0, no_msp34xx: 1, pll: PLL_28, tuner_type: -1, },{ /* http://www.aopen.com/products/video/va1000.htm */ name: "AOPEN VA1000", video_inputs: 3, /* coax, AV, s-vid */ audio_inputs: 1, tuner: 0, tuner_type: TUNER_LG_PAL, /* actually TP18PSB12P (PAL B/G) */ audiomux: { 2, 0, 0, 0 }, muxsel: { 2, 3, 1, 0 }, pll: PLL_28, }}; const int bttv_num_tvcards = (sizeof(bttv_tvcards)/sizeof(struct tvcard)); /* ----------------------------------------------------------------------- */ static unsigned char eeprom_data[256]; /* * identify card */ void __devinit bttv_idcard(struct bttv *btv) { unsigned int gpiobits; int i,type; unsigned short tmp; /* read PCI subsystem ID */ pci_read_config_word(btv->dev, PCI_SUBSYSTEM_ID, &tmp); btv->cardid = tmp << 16; pci_read_config_word(btv->dev, PCI_SUBSYSTEM_VENDOR_ID, &tmp); btv->cardid |= tmp; if (0 != btv->cardid && 0xffffffff != btv->cardid) { /* look for the card */ for (type = -1, i = 0; cards[i].id != 0; i++) if (cards[i].id == btv->cardid) type = i; if (type != -1) { /* found it */ printk(KERN_INFO "bttv%d: detected: %s [card=%d], " "PCI subsystem ID is %04x:%04x\n", btv->nr,cards[type].name,cards[type].cardnr, btv->cardid & 0xffff, btv->cardid >> 16); btv->type = cards[type].cardnr; } else { /* 404 */ printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n", btv->nr, btv->cardid&0xffff, btv->cardid>>16); printk(KERN_DEBUG "please mail id, board name and " "the correct card= insmod option to kraxel@bytesex.org\n"); } } /* let the user override the autodetected type */ if (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) btv->type=card[btv->nr]; /* print which card config we are using */ sprintf(btv->video_dev.name,"BT%d%s(%.23s)", btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "", bttv_tvcards[btv->type].name); printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr, btv->video_dev.name,btv->type, (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ? "insmod option" : "autodetected"); /* overwrite gpio stuff ?? */ if (-1 == audioall && -1 == audiomux[0]) return; if (-1 != audiomux[0]) { gpiobits = 0; for (i = 0; i < 5; i++) { bttv_tvcards[btv->type].audiomux[i] = audiomux[i]; gpiobits |= audiomux[i]; } } else { gpiobits = audioall; for (i = 0; i < 5; i++) { bttv_tvcards[btv->type].audiomux[i] = audioall; } } bttv_tvcards[btv->type].gpiomask = (-1 != gpiomask) ? gpiomask : gpiobits; printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", btv->nr,bttv_tvcards[btv->type].gpiomask); for (i = 0; i < 5; i++) { printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]); } printk("\n"); } /* * (most) board specific initialisations goes here */ static void flyvideo_gpio(struct bttv *btv) { int gpio,outbits; int tuner=-1,ttype; outbits = btread(BT848_GPIO_OUT_EN); btwrite(0x00, BT848_GPIO_OUT_EN); udelay(8); // without this we would see the 0x1800 mask gpio=btread(BT848_GPIO_DATA); btwrite(outbits, BT848_GPIO_OUT_EN); // all cards provide GPIO info, some have an additional eeprom // lowest 3 bytes are remote control codes (no handshake needed) ttype=(gpio&0x0f0000)>>16; switch(ttype) { case 0: tuner=4; // None break; case 4: tuner=5; // Philips PAL break; case 6: tuner=37; // LG PAL (newer TAPC series) break; case 0xC: tuner=3; // Philips SECAM(+PAL) break; default: printk(KERN_INFO "bttv%d: flyvideo_gpio: unknown tuner type.\n", btv->nr); } printk(KERN_INFO "bttv%d: Flyvideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", btv->nr, gpio&0x400000? "yes":"no", gpio&0x800000? "yes":"no", tuner, gpio); btv->tuner_type = tuner; btv->has_radio = gpio&0x400000? 1:0; } int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,0,0,0 }; /* initialization part one -- before registering i2c bus */ void __devinit bttv_init_card1(struct bttv *btv) { if (btv->type == BTTV_HAUPPAUGE || btv->type == BTTV_HAUPPAUGE878) boot_msp34xx(btv,5); if (btv->type == BTTV_VOODOOTV_FM) boot_msp34xx(btv,20); } /* initialization part one -- after registering i2c bus */ void __devinit bttv_init_card2(struct bttv *btv) { /* miro/pinnacle */ if (btv->type == BTTV_MIRO || btv->type == BTTV_MIROPRO || btv->type == BTTV_PINNACLE || btv->type == BTTV_PINNACLEPRO) { int id,msp; id = ((btread(BT848_GPIO_DATA)>>10) & 31) -1; msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx"); btv->tuner_type = miro_tunermap[id]; if (0 == (btread(BT848_GPIO_DATA) & 0x20)) { btv->has_radio = 1; if (!miro_fmtuner[id]) { btv->has_matchbox = 1; btv->mbox_we = (1<<6); btv->mbox_most = (1<<7); btv->mbox_clk = (1<<8); btv->mbox_data = (1<<9); btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); } } else { btv->has_radio = 0; } if (-1 != msp) { if (btv->type == BTTV_MIRO) btv->type = BTTV_MIROPRO; if (btv->type == BTTV_PINNACLE) btv->type = BTTV_PINNACLEPRO; } if (bttv_verbose) printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d " "radio=%s stereo=%s\n", btv->nr, id+1, btv->tuner_type, !btv->has_radio ? "no" : (btv->has_matchbox ? "matchbox" : "fmtuner"), (-1 == msp) ? "no" : "yes"); #if 0 if (btv->has_matchbox) { if (bttv_verbose) printk(KERN_INFO "Initializing TEA5757...\n"); init_tea5757(btv); } #endif } if (btv->type == BTTV_FLYVIDEO_98 || btv->type == BTTV_FLYVIDEO || btv->type == BTTV_TYPHOON_TVIEW || btv->type == BTTV_CHRONOS_VS2 || btv->type == BTTV_FLYVIDEO_98FM || btv->type == BTTV_FLYVIDEO2000 || btv->type == BTTV_FLYVIDEO98EZ) flyvideo_gpio(btv); if (btv->type == BTTV_HAUPPAUGE || btv->type == BTTV_HAUPPAUGE878) { /* pick up some config infos from the eeprom */ bttv_readee(btv,eeprom_data,0xa0); hauppauge_eeprom(btv); } if (btv->type == BTTV_AVERMEDIA98 || btv->type == BTTV_AVPHONE98) { bttv_readee(btv,eeprom_data,0xa0); avermedia_eeprom(btv); } if (btv->type == BTTV_PXC200) init_PXC200(btv); if (btv->type == BTTV_VHX) { btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x20; btv->mbox_most = 0; btv->mbox_clk = 0x08; btv->mbox_data = 0x10; btv->mbox_mask = 0x38; } if (btv->type == BTTV_LIFETEC_9415) { if (btread(BT848_GPIO_DATA) & 0x4000) printk("bttv%d: lifetec: tv mono/fm stereo card\n", btv->nr); else printk("bttv%d: lifetec: stereo(TDA9821) card\n",btv->nr); } if (btv->type == BTTV_MAGICTVIEW061) { if(btv->cardid == 0x4002144f) { btv->has_radio=1; printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr); } } /* pll configuration */ if (!(btv->id==848 && btv->revision==0x11)) { /* defaults from card list */ if (PLL_28 == bttv_tvcards[btv->type].pll) { btv->pll.pll_ifreq=28636363; btv->pll.pll_crystal=BT848_IFORM_XT0; } if (PLL_35 == bttv_tvcards[btv->type].pll) { btv->pll.pll_ifreq=35468950; btv->pll.pll_crystal=BT848_IFORM_XT1; } /* insmod options can override */ switch (pll[btv->nr]) { case 0: /* none */ btv->pll.pll_crystal = 0; btv->pll.pll_ifreq = 0; btv->pll.pll_ofreq = 0; break; case 1: /* 28 MHz */ case 28: btv->pll.pll_ifreq = 28636363; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT0; break; case 2: /* 35 MHz */ case 35: btv->pll.pll_ifreq = 35468950; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT1; break; } } /* tuner configuration (from card list / insmod option) */ if (-1 != bttv_tvcards[btv->type].tuner_type) btv->tuner_type = bttv_tvcards[btv->type].tuner_type; if (-1 != tuner[btv->nr]) btv->tuner_type = tuner[btv->nr]; if (btv->tuner_type != -1) bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type); if (bttv_tvcards[btv->type].has_radio) btv->has_radio=1; /* try to detect audio/fader chips */ if (!bttv_tvcards[btv->type].no_msp34xx && bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) { if (autoload) request_module("msp3400"); } if (!bttv_tvcards[btv->type].no_tda9875 && bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) { if (autoload) request_module("tda9875"); } if (bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) { if (autoload) request_module("tda7432"); } if (bttv_tvcards[btv->type].needs_tvaudio) { if (autoload) request_module("tvaudio"); } if (bttv_tvcards[btv->type].tuner != -1) { if (autoload) request_module("tuner"); } } /* ----------------------------------------------------------------------- */ /* some hauppauge specific stuff */ static struct HAUPPAUGE_TUNER { int id; char *name; } hauppauge_tuner[] __devinitdata = { { TUNER_ABSENT, "" }, { TUNER_ABSENT, "External" }, { TUNER_ABSENT, "Unspecified" }, { TUNER_PHILIPS_PAL, "Philips FI1216" }, { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, { TUNER_PHILIPS_NTSC, "Philips FI1236" }, { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, { TUNER_PHILIPS_PAL_DK,"Philips FI1256" }, { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, { TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" }, { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, { TUNER_TEMIC_PAL, "Temic 4002FH5" }, { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, { TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" }, { TUNER_PHILIPS_PAL, "Philips FM1216" }, { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, { TUNER_PHILIPS_NTSC, "Philips FM1236" }, { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, { TUNER_PHILIPS_PAL_DK,"Philips FM1256" }, { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, { TUNER_ABSENT, "Samsung TCPN9082D" }, { TUNER_ABSENT, "Samsung TCPM9092P" }, { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, { TUNER_ABSENT, "Samsung TCPN9085D" }, { TUNER_ABSENT, "Samsung TCPB9085P" }, { TUNER_ABSENT, "Samsung TCPL9091P" }, { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, { TUNER_ABSENT, "Philips TD1536" }, { TUNER_ABSENT, "Philips TD1536D" }, { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ { TUNER_ABSENT, "Philips FI1256MP" }, { TUNER_ABSENT, "Samsung TCPQ9091P" }, { TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" }, { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, { TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" }, { TUNER_ABSENT, "Philips TD1536D_FH_44"}, { TUNER_LG_NTSC_FM, "LG TP18NSR01F"}, { TUNER_LG_PAL_FM, "LG TP18PSB01D"}, { TUNER_LG_PAL, "LG TP18PSB11D"}, { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, { TUNER_LG_PAL_I, "LG TAPC-I701D"} }; static void __devinit hauppauge_eeprom(struct bttv *btv) { int blk2,tuner,radio,model; if (eeprom_data[0] != 0x84 || eeprom_data[2] != 0) printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n", btv->nr); /* Block 2 starts after len+3 bytes header */ blk2 = eeprom_data[1] + 3; /* decode + use some config infos */ model = eeprom_data[12] << 8 | eeprom_data[11]; tuner = eeprom_data[9]; radio = eeprom_data[blk2-1] & 0x01; if (tuner < sizeof(hauppauge_tuner)/sizeof(struct HAUPPAUGE_TUNER)) btv->tuner_type = hauppauge_tuner[tuner].id; if (radio) btv->has_radio = 1; if (bttv_verbose) printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, " "tuner=%s (%d), radio=%s\n", btv->nr, model, hauppauge_tuner[tuner].name, btv->tuner_type, radio ? "yes" : "no"); } /* ----------------------------------------------------------------------- */ /* AVermedia specific stuff, from bktr_card.c */ int tuner_0_table[] = { TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL}; #if 0 int tuner_0_fm_table[] = { PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL}; #endif int tuner_1_table[] = { TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; static void __devinit avermedia_eeprom(struct bttv *btv) { int tuner_make,tuner_tv_fm,tuner_format,tuner=0,remote; tuner_make = (eeprom_data[0x41] & 0x7); tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; remote = (eeprom_data[0x42] & 0x01); if (tuner_make == 0 || tuner_make == 2) if(tuner_format <=9) tuner = tuner_0_table[tuner_format]; if (tuner_make == 1) if(tuner_format <=9) tuner = tuner_1_table[tuner_format]; printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", btv->nr,eeprom_data[0x41],eeprom_data[0x42]); if(tuner) { btv->tuner_type=tuner; printk("%d",tuner); } else printk("Unknown type"); printk(" radio:%s remote control:%s\n", tuner_tv_fm?"yes":"no", remote?"yes":"no"); } /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { // fix up our card entry if(norm==VIDEO_MODE_NTSC) { bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff; bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff; bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } // set GPIO according btaor(bttv_tvcards[btv->type].audiomux[btv->audio], ~bttv_tvcards[btv->type].gpiomask, BT848_GPIO_DATA); } /* * reset/enable the MSP on some Hauppauge cards * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! * * Hauppauge: pin 5 * Voodoo: pin 20 */ static void __devinit boot_msp34xx(struct bttv *btv, int pin) { int mask = (1 << pin); btaor(mask, ~mask, BT848_GPIO_OUT_EN); btaor(0, ~mask, BT848_GPIO_DATA); udelay(2500); btaor(mask, ~mask, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"msp34xx"); if (bttv_verbose) printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line " "init [%d]\n", btv->nr, pin); } /* ----------------------------------------------------------------------- */ /* Imagenation L-Model PXC200 Framegrabber */ /* This is basically the same procedure as * used by Alessandro Rubini in his pxc200 * driver, but using BTTV functions */ static void __devinit init_PXC200(struct bttv *btv) { static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x00 }; int i,tmp; /* Initialise GPIO-connevted stuff */ btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */ btwrite(0,BT848_GPIO_DATA); udelay(3); btwrite(1<<13,BT848_GPIO_DATA); /* GPIO inputs are pulled up, so no need to drive * reset pin any longer */ btwrite(0,BT848_GPIO_OUT_EN); if (bttv_gpio) bttv_gpio_tracking(btv,"pxc200"); /* we could/should try and reset/control the AD pots? but right now we simply turned off the crushing. Without this the AGC drifts drifts remember the EN is reverse logic --> setting BT848_ADC_AGC_EN disable the AGC tboult@eecs.lehigh.edu */ btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); /* Initialise MAX517 DAC */ printk(KERN_INFO "Setting DAC reference voltage level ...\n"); bttv_I2CWrite(btv,0x5E,0,0x80,1); /* Initialise 12C508 PIC */ /* The I2CWrite and I2CRead commmands are actually to the * same chips - but the R/W bit is included in the address * argument so the numbers are different */ printk(KERN_INFO "Initialising 12C508 PIC chip ...\n"); for (i = 0; i < sizeof(vals)/sizeof(int); i++) { tmp=bttv_I2CWrite(btv,0x1E,vals[i],0,1); printk(KERN_INFO "I2C Write(0x08) = %i\nI2C Read () = %x\n\n", tmp,bttv_I2CRead(btv,0x1F,NULL)); } printk(KERN_INFO "PXC200 Initialised.\n"); } /* ----------------------------------------------------------------------- */ /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ /* * Copyright (c) 1999 Csaba Halasz * This code is placed under the terms of the GNU General Public License * * Brutally hacked by Dan Sheridan djs52 8/3/00 */ #if 0 /* bus bits on the GPIO port */ #define TEA_WE 6 #define TEA_DATA 9 #define TEA_CLK 8 #define TEA_MOST 7 #endif #define BUS_LOW(bit) btand(~(bit), BT848_GPIO_DATA) #define BUS_HIGH(bit) btor((bit), BT848_GPIO_DATA) #define BUS_IN(bit) (btread(BT848_GPIO_DATA) & (bit)) /* TEA5757 register bits */ #define TEA_FREQ 0:14 #define TEA_BUFFER 15:15 #define TEA_SIGNAL_STRENGTH 16:17 #define TEA_PORT1 18:18 #define TEA_PORT0 19:19 #define TEA_BAND 20:21 #define TEA_BAND_FM 0 #define TEA_BAND_MW 1 #define TEA_BAND_LW 2 #define TEA_BAND_SW 3 #define TEA_MONO 22:22 #define TEA_ALLOW_STEREO 0 #define TEA_FORCE_MONO 1 #define TEA_SEARCH_DIRECTION 23:23 #define TEA_SEARCH_DOWN 0 #define TEA_SEARCH_UP 1 #define TEA_STATUS 24:24 #define TEA_STATUS_TUNED 0 #define TEA_STATUS_SEARCHING 1 /* Low-level stuff */ static int tea5757_read(struct bttv *btv) { int value = 0; long timeout; int i; /* better safe than sorry */ btaor((btv->mbox_clk | btv->mbox_we), ~btv->mbox_mask, BT848_GPIO_OUT_EN); if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 read"); BUS_LOW(btv->mbox_we); BUS_LOW(btv->mbox_clk); udelay(10); for(timeout = jiffies + 10 * HZ; BUS_IN(btv->mbox_data) && time_before(jiffies, timeout); schedule()); /* 10 s */ if (BUS_IN(btv->mbox_data)) { printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->nr); return -1; } for(timeout = jiffies + HZ/5; BUS_IN(btv->mbox_data) == 1 && time_before(jiffies, timeout); schedule()); /* 0.2 s */ dprintk("bttv%d: tea5757:",btv->nr); for(i = 0; i < 24; i++) { udelay(5); BUS_HIGH(btv->mbox_clk); udelay(5); dprintk("%c",(BUS_IN(btv->mbox_most) == 0)?'T':'-'); BUS_LOW(btv->mbox_clk); value <<= 1; value |= (BUS_IN(btv->mbox_data) == 0)?0:1; /* MSB first */ dprintk("%c", (BUS_IN(btv->mbox_most) == 0)?'S':'M'); } dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->nr, value); return value; } static int tea5757_write(struct bttv *btv, int value) { int i; int reg = value; btaor(btv->mbox_clk | btv->mbox_we | btv->mbox_data, ~btv->mbox_mask, BT848_GPIO_OUT_EN); if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 write"); dprintk("bttv%d: tea5757: write 0x%X\n", btv->nr, value); BUS_LOW(btv->mbox_clk); BUS_HIGH(btv->mbox_we); for(i = 0; i < 25; i++) { if (reg & 0x1000000) BUS_HIGH(btv->mbox_data); else BUS_LOW(btv->mbox_data); reg <<= 1; BUS_HIGH(btv->mbox_clk); udelay(10); BUS_LOW(btv->mbox_clk); udelay(10); } BUS_LOW(btv->mbox_we); /* unmute !!! */ return 0; } void tea5757_set_freq(struct bttv *btv, unsigned short freq) { tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ if (bttv_debug) tea5757_read(btv); } /* ----------------------------------------------------------------------- */ /* winview */ void winview_audio(struct bttv *btv, struct video_audio *v, int set) { /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */ int bits_out, loops, vol, data; if (!set) { /* Fixed by Leandro Lucarella flags |= VIDEO_AUDIO_VOLUME; return; } /* 32 levels logarithmic */ vol = 32 - ((v->volume>>11)); /* units */ bits_out = (PT2254_DBS_IN_2>>(vol%5)); /* tens */ bits_out |= (PT2254_DBS_IN_10>>(vol/5)); bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL; data = btread(BT848_GPIO_DATA); data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA| WINVIEW_PT2254_STROBE); for (loops = 17; loops >= 0 ; loops--) { if (bits_out & (1<mode & VIDEO_SOUND_LANG1) con = 0x000; if (v->mode & VIDEO_SOUND_LANG2) con = 0x300; if (v->mode & VIDEO_SOUND_STEREO) con = 0x200; // if (v->mode & VIDEO_SOUND_MONO) // con = 0x100; btaor(con, ~0x300, BT848_GPIO_DATA); } else { v->mode = VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Mario Medina Nussbaum * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo, * 0xdde enables mono and 0xccd enables sap * * Petr Vandrovec * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select * input/output sound connection, so both must be set for output mode. * * Looks like it's needed only for the "tvphone", the "tvphone 98" * handles this with a tda9840 * */ static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set) { int val = 0; if (set) { if (v->mode & VIDEO_SOUND_LANG1) /* SAP */ val = 0x02; if (v->mode & VIDEO_SOUND_STEREO) val = 0x01; if (val) { btaor(val, ~0x03, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"avermedia"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1; return; } } /* Lifetec 9415 handling */ static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set) { int val = 0; if (btread(BT848_GPIO_DATA) & 0x4000) { v->mode = VIDEO_SOUND_MONO; return; } if (set) { if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */ val = 0x0080; if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */ val = 0x0880; if ((v->mode & VIDEO_SOUND_LANG1) || (v->mode & VIDEO_SOUND_MONO)) val = 0; btaor(val, ~0x0880, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"lt9415"); } else { /* autodetect doesn't work with this card :-( */ v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; return; } } static void terratv_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int con = 0; if (set) { btor(0x180000, BT848_GPIO_OUT_EN); if (v->mode & VIDEO_SOUND_LANG2) con = 0x080000; if (v->mode & VIDEO_SOUND_STEREO) con = 0x180000; btaor(con, ~0x180000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"terratv"); } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned long val = 0; if (set) { /*btor (0xc32000, BT848_GPIO_OUT_EN);*/ if (v->mode & VIDEO_SOUND_MONO) /* Mono */ val = 0x420000; if (v->mode & VIDEO_SOUND_LANG1) /* Mono */ val = 0x420000; if (v->mode & VIDEO_SOUND_LANG2) /* SAP */ val = 0x410000; if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */ val = 0x020000; if (val) { btaor(val, ~0x430000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"winfast2000"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Dariusz Kowalewski * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM * revision 9B has on-board TDA9874A sound decoder). */ static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int val = 0; #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0) if (btv->radio_user) return; #else if (btv->radio) return; #endif if (set) { if (v->mode & VIDEO_SOUND_MONO) { val = 0x01; } if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) || (v->mode & VIDEO_SOUND_STEREO)) { val = 0x02; } if (val) { btaor(val, ~0x03, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"pvbt878p9b"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Dariusz Kowalewski * sound control for FlyVideo 2000S (with tda9874 decoder) * based on pvbt878p9b_audio() - this is not tested, please fix!!! */ static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int val = 0xffff; #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0) if (btv->radio_user) return; #else if (btv->radio) return; #endif if (set) { if (v->mode & VIDEO_SOUND_MONO) { val = 0x0000; } if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) || (v->mode & VIDEO_SOUND_STEREO)) { val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ... } if (val != 0xffff) { btaor(val, ~0x1800, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"fv2000s"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * sound control for Canopus WinDVR PCI * Masaki Suzuki */ static void windvr_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned long val = 0; if (set) { if (v->mode & VIDEO_SOUND_MONO) val = 0x040000; if (v->mode & VIDEO_SOUND_LANG1) val = 0; if (v->mode & VIDEO_SOUND_LANG2) val = 0x100000; if (v->mode & VIDEO_SOUND_STEREO) val = 0; if (val) { btaor(val, ~0x140000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"windvr"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] * * This is needed because rv605 don't use a normal multiplex, but a crosspoint * switch instead (CD22M3494E). This IC can have multiple active connections * between Xn (input) and Yn (output) pins. We need to clear any existing * connection prior to establish a new one, pulsing the STROBE pin. * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) * GPIO[8] - - P3[5] (microcontroler) * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) * GPINTR - - P3[4] (microcontroler) * * The microcontroler is a 80C32 like. It should be possible to change xpoint * configuration either directly (as we are doing) or using the microcontroler * which is also wired to I2C interface. I have no further info on the * microcontroler features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ static void rv605_muxsel(struct bttv *btv, unsigned int input) { /* reset all conections */ btaor(0x200,~0x200, BT848_GPIO_DATA); mdelay(1); btaor(0x000,~0x200, BT848_GPIO_DATA); mdelay(1); /* create a new conection */ btaor(0x080,~0x480, BT848_GPIO_DATA); btaor(0x480,~0x480, BT848_GPIO_DATA); mdelay(1); btaor(0x080,~0x480, BT848_GPIO_DATA); mdelay(1); } /* ----------------------------------------------------------------------- */ /* motherboard chipset specific stuff */ void __devinit bttv_check_chipset(void) { int pcipci_fail = 0; struct pci_dev *dev = NULL; /* for 2.4.x we'll use the pci quirks (drivers/pci/quirks.c) */ if (pci_pci_problems & PCIPCI_FAIL) pcipci_fail = 1; if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) triton1 = 1; if (pci_pci_problems & PCIPCI_VSFX) vsfx = 1; /* print which chipset we have */ while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev))) printk(KERN_INFO "bttv: Host bridge is %s\n",dev->name); /* print warnings about any quirks found */ if (triton1) printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n"); if (vsfx) printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); if (pcipci_fail) { printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n"); if (-1 == no_overlay) { printk(KERN_WARNING "bttv: going to disable overlay.\n"); no_overlay = 1; } } while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, dev))) { unsigned char b; pci_read_config_byte(dev, 0x53, &b); if (bttv_debug) printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " "bufcon=0x%02x\n",b); } } int __devinit bttv_handle_chipset(struct bttv *btv) { unsigned char command; if (!triton1 && !vsfx) return 0; if (bttv_verbose) { if (triton1) printk("bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr); if (vsfx && btv->id >= 878) printk("bttv%d: enabling VSFX\n",btv->nr); } if (btv->id < 878) { /* bt848 (mis)uses a bit in the irq mask for etbf */ if (triton1) btv->triton1 = BT848_INT_ETBF; } else { /* bt878 has a bit in the pci config space for it */ pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command); if (triton1) command |= BT878_EN_TBFX; if (vsfx) command |= BT878_EN_VSFX; pci_write_config_byte(btv->dev, BT878_DEVCTRL, command); } return 0; } /* * Local variables: * c-basic-offset: 8 * End: */